View
3
Download
0
Category
Preview:
Citation preview
Carl Stahl TECHNOCABLES - We guarantee quality, service and performance
2
The Carl Stahl TECHNOCABLES GmbH, member of the Carl Stahl Group, has been working with technical ropes and strandsfor decades and is today one of the world‘s market leaders in this field.
As a traditional German company, we place the highest value on quality. Utilizing our many years of experience in the fieldof wire rope technology we are constantly developing new products and solutions for a wide variety of industrial applica-tions.
For users in the field of ceiling suspensions, lights, fall arresters, acoustic elements, interior design, etc. we develop, produceand deliver suspension systems and their accessories. The Carl Stahl TECHNOCABLES team is always at your disposal.
ABOUT US
3
ÜBERSICHT LIEFERPROGRAMM
CABLE HOLDERfor rope –Ø 1,0 mm – 1,8 mm
Stepless adjustmentInstallation without toolsTime-saving installation
COMPLETE ROPESUSPENSION SETS
SUSPENSION CABLES
Many standard lengths & diameters in stock Of course we also produce ropes and cables individually according to your require- ments.
Application examples can be found on pages 14 and 15.
Rope suspension sets can be adapted individually to your requirements.
PRODUCT PROGRAM
CABLE HOLDER
Female threadwith lateral run outDiameter: 10 mmLength: 33 mmThread depth: 7 mm
Item no.:M6 = SL000151M5 = SL000153M4 = SL000154
Male threadwith lateral run outDiameter: 10 mmLength: 41 mmThread length: 8 mm
Item no.:M6 = SL000155M5 = SL000156
Male threadstraight run outDiameter: 10 mmLength: 28 mmThread length: 8 mm
Item no.:M6 = SL000161M5 = SL000162
Item no.:M6 = SL000177*M5 = SL000178*M4 = SL000179*
with locknut
Item no.:M6 = SL000180*M5 = SL000181*
with locknut
Item no.:M6 = SL000182*M5 = SL000183*
with locknut
4
Item no.: SL000187*
LOOPfor quick production of arope loopWidth: 20 mmLength: 20 mm
Item no.:SL000167
HINTS
All cable holders are shown approximately in original size, unless otherwisespecified. All cable holders are made of nickel plated brass.Other surfaces, depending on quantity, are possible.All cable holders are TÜV-Süd certified.
*available on request
with locknut
5
Snap hookstraight run outsafety latchOpening: 7 mmLength: 28 mm
Item no.:SL000172
*available on request
Eyeletstraight run outØ-Ring outside: 24 mmØ-Ring inside: 14 mmLength: 28 mm
Item no.:SL000173
3-Cable branchingstraight run outSuitable ropes page 11Diameter: 14 mmLength: 16 mm
Item no.:SL000158
4-Cable branchingstraight run outSuitable ropes page 11Diameter: 14 mmLength: 16 mm
Item no.:SL000157
Hook straight run outsafety latchDiameter: 10.8 mmLength: 48.8 mm
Item no.: SL000121
SUITABLE COUPLING PARTS FOR OUR CABLE HOLDERS WITH M6 - MALE THREAD
Please consider the workload table onpage 9
Mounting clipfor NORDIC busbarBore: 10 mmWidth: 28 mmHeight: 10 mmLength: 30 mm
Item no.: SN000115
with locknut
Item no.: SL000193*
CABLE HOLDER
Busbar clip holderstraight run outGroove width: 1mmpossible sheetthickness: 1mmDiameter: 10 mmLength: 17 mm
Item no.: SL000192
6
CABLE HOLDER
*available on request
Item no.:M6 = SL000188*M5 = SL000189*
Item no.:M6 = SL000190*M5 = SL000191*
with locknut with locknut
Swivel headmale threadwith lateral run outSwiveling about 180°Diameter: 10 mmLength: 46 mmThread length: 8 mm
Item no.:M6 = SL000168M5 = SL000169
Swivel headfemale threadwith lateral run outSwiveling about 180°Diameter: 10 mmLength: 44 mmThread length: 7 mm
Item no.:M6 = SL000170M5 = SL000171
Cable holder forY-suspension with slitwith lateral run out with slit andknurled screwDiameter: 10 mmLength: 37 mm
Item no.:
SL000163
Item no.:SL000184*
Item no.:SL000185*
Cable holder forY-suspension with borewith lateral run out with bore andknurled screwDiameter: 10 mmLength: 37 mm
Item no.:
SL000164
with locknut with locknut
7
CABLE HOLDER
Feel free to contact us!
Depending on project and quantity
we develop together with you your
specific cable holder.
+49 (0) 7162 4007- 2280
+49 (0) 7162 4007- 8827
technocables@carlstahl.com
www.carlstahl- technocables.com
You haven‘tfound yourcable holder?
*available on request
Ceiling attachmentM13x1Female threadBore in the bottom: Ø 7 mmCollar diameter: 20 mmØ-Sleeve: 16 mmLength: 22 mm
Item no.: SL000175
Ceiling attachment M12x1Female threadwith slot 2.5 mmBore in the bottom: Ø 5 mmCollar diameter: 18 mmØ-Sleeve: 14 mmLength: 29 mm
Item no.: SL000166
Ceiling attachmentM10x1Female threadThread in the bottom: M6Collar diameter: 16 mmØ-Sleeve: 12 mmLength: 18 mm
Item no.: SL000159
Ceiling attachment M13x1Male threadwith straight run outFor width across flat: 14Collar diameter: 16 mmLength: 14 mm
Item no.: SL000176
Immersible M12x1Male threadwith straight run outCollar diameter: 14 mmLength: 18 mm
Item no.: SL000165
Ceiling attachment M10x1Male threadwith straight run outCollar diameter: 12 mmLength: 13 mm
Item no.: SL000160
Ceiling attachment M13x1Swiveling about 180° for sloped ceilingsHead diameter: 16 mmLength: 19 mm
Item no.: SL000174
Item no.: SL000186*
with locknut
8
CERTIFIED SECURITY
All our cable holders are of course TÜV-Süd certified.
Of course TÜV-Süd certified
Download the complete certificate under: www.carlstahltechnocables.com/download
9
CABLE HOLDERS / SUSPENSION ROPES
Nominal tensile strength = 1570 N/mm² (stainless steel) & 2400 N/mm² (galvanized steel)Material = Stainless steel or galvanized steelConstruction = 6x7- WSCEnd terminal = Zinc die-cast or pressed out of brass, stainless steel or galvanized steelOpen rope end = Thermally welded
Suspension cables must not be oiled or greased! For ropes with different specification, we don’t extend warranty.
a) Screw in the cable and lightly press the button.b) Feed the cable to the desired positon. It will lock automa- tically with a slight pull.c) The cable may be released by pressing the button and the cable holder may be adjusted freely on the cable.
Rope – Ø (mm)
Galvanized steel, 6x7-WSC
Max. working load (kg)
Stainless steel rope, 1.4401 (AISI 316), 6x7-WSC
Max. working load (kg)
Ø 1.00
SE000491
10 kg
SE000497
7 kg
Working load of cable holders is specified with safety factor 5:1!
Download detailed instruction manual under:https://www.carlstahl-technocables.com/downloads.html
Installation of cable holders
Specification standard suspension ropes
Ø 1.20
SE000492
15 kg
SE000498
10 kg
Ø 1.50
SE000494
22 kg
SE000499
19 kg
Ø 1.80
SE000496
28,5 kg
SE000500
24 kg
Rope – Ø (mm)
Galvanized steel, 6x7-WSC
Max. working load (kg)
Ø 1.00
-
-
Ø 1.20
SE000492
13 kg
Ø 1.50
SE000494
17 kg
Ø 1.80
SE000496
26.5 kg
Working load, rope types and rope diameters
Working load, rope types and rope diameters for cable holder SL000121
10
Swaged terminals Die-cast terminals
Basically, you can choose from the following types of rope end terminals:
PRE-ASSEMBLED SUSPENSION CABLES
As a wire rope manufacturer with our own cable factory and assembly shop with experience since 1885, we areyour expert in the field of steel cables and their applications.
In conjunction with our cable holders, we process ropes in the diameter range 1.0 - 1.8 mm. You choose from the materials stainless steel or galvanized steel. Other materials are available on request.
By this you will receive complete rope suspension solutions from Carl Stahl Technocables, consisting of pre-assembled ropes & cable holders, on request also packed as a complete set.
Everything from one single source: Carl Stahl TECHNOCABLES
11
Cable with ball Ø 6 mmcable - Ø 1.2 mm, galvanized steel
Any other length also available
Length in mm Item no.
1,5003,000
TC004305TC004990
Cable with ball Ø 3.5 mmcable - Ø 1.2 mm, galvani-zed steel for 3- and 4- cablebranching
Any other length also available
Length in mm Item no.
5001,000
TC004709TC004710
PRE-ASSEMBLED SUSPENSION CABLES
Cable with sleeve Ø 5 x L 7mm cable - Ø 1.5 mm, galvanized steel
Any other length also available
Length in mm Item no.
1,5003,000
TC005122TC005123
Cable with sleeve Ø 4 x L 4mm cable - Ø 1.5 mm, galvanized steel
Any other length also available
Length in mm Item no.
1,5003,000
TC004151TC004152
Cable with soft eyecable - Ø 1.5 mm, galvani-zed steel
Rope with eyezinc diecastcable - Ø 1.2 mm, galvanizedbolt - Ø max.: 5.0 mmLength max.: 15.5 mm
B
Please indicate bolt - Ø andmeasure B according to yourrequirements. The dimension A isabout twice as large as measure B.
A
Ø
L
12
Feel free to contact us!Depending on project and quantitywe develop together with you your specific cable.
+49 (0) 7162 4007- 2280
+49 (0) 7162 4007- 8827
technocables@carlstahl.com
www.carlstahl- technocables.com
You haven‘t found yourcable?
PRE-ASSEMBLED SUSPENSION CABLES
Rope with drawbar eyeØ - inside 5.1 mmcable - Ø 1.2 mm, galvanized steel
Cable with thread M6x10cable - Ø 1.5 mm, galvanized steel
Rope with 2 x eyelet Ø - inside 5.4 mm cable - Ø 1.5 mm, galvanized steel
SPECIAL - spring rope with soft eyes
cable - Ø 1.6 mm, stainless steel
Length in mm
500
Item no.
TC004656
Any other length also available
13
Feel free to contact us!Depending on project and quantity we develop together with you your specific suspension set.
+49 (0) 7162 4007- 2280
+49 (0) 7162 4007- 8827
technocables@carlstahl.com
www.carlstahl- technocables.com
You haven‘t found yourcombination?
READY ASSEMBLED SUSPENSION SETS
EXAMPLES OF USE
SL000155 combined with SL000172
Three and four cable branching in action…
14
SL000161 combined with SL000173
SL000155 combined with SL000173
SL000161 combined with SL000172
SL000155 combined withSL000158 & SL000157
SL000161 combined withSL000158 & SL000157
15
EXAMPLES OF USE
Y-cable holder with slit and lock nutSuspension for NORDIC - conductor rail
Y-cable holder with bore LOOP – for the swift creation of a loop
Changes reserved / Reproduction of this brochure, even in part, is prohibited.
Carl Stahl TECHNOCABLES GmbHTobelstraße 273079 Süßen / Germany
+49 (0) 71 62 40 07- 2280+49 (0) 71 62 40 07- 88 27technocables@carlstahl.comwww.carlstahl-technocables.com
Development, manufacturing and consultation from one source:
Carl Stahl TECHNOCABLES
Recommended