View
220
Download
1
Category
Preview:
Citation preview
8/3/2019 CA Ex S1M08 OSI Physical Layer
1/74
Please purchase a personal
license.
Network Fundamentals Chapter 8
8/3/2019 CA Ex S1M08 OSI Physical Layer
2/74
Objectives
Explain the role of Physical layer protocols andservices in supporting communication across data
networks.
Describe the role of signals used to represent bitsas a frame as the frame is transported across the
Hc vin mng Bach Khoa - Website: www.bkacad.com
oca me a Describe the purpose of Physical layer signaling and
encoding as they are used in networks
Identify the basic characteristics of copper, fiber andwireless network media
Describe common uses of copper, fiber and wirelessnetwork media
8/3/2019 CA Ex S1M08 OSI Physical Layer
3/74
Communication signals
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
4/74
Physical Layer - Purpose
Hc vin mng Bach Khoa - Website: www.bkacad.com
The Physical layer consists of hardware, developed by engineers, inthe form of electronic circuitry, media, and connectors.
The OSI Physical layer provides the means to transport across thenetwork media the bits that make up a Data Link layer frame.
This layer accepts a complete frame from the Data Link layer andencodes it as a series of signals that are transmitted onto the localmedia.
8/3/2019 CA Ex S1M08 OSI Physical Layer
5/74
Physical Layer - Purpose
Hc vin mng Bach Khoa - Website: www.bkacad.com
1. The physical media and associated connectors
2. A representation of bits on the media
3. Encoding of data and control information
4. Transmitter and receiver circuitry on the network devices
At this stage of the communication process, the user data has beensegmented by the Transport layer, placed into packets by the Networklayer, and further encapsulated as frames by the Data Link layer.
8/3/2019 CA Ex S1M08 OSI Physical Layer
6/74
Physical Layer - Purpose
Hc vin mng Bach Khoa - Website: www.bkacad.com
The purpose of the Physical layer is to create the electrical, optical, ormicrowave signal that represents the bits in each frame. These signals arethen sent on the media one at a time.
It is also the job of the Physical layer to retrieve individual signals from themedia, restore them to their bit representations, and pass the bits up to the
Data Link layer as a complete frame.
8/3/2019 CA Ex S1M08 OSI Physical Layer
7/74
Physical Layer - Operation
There are 3 basic forms
of network media onwhich data isrepresented:
-Copper cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
The media does not carry the frame as a single entity.The media carries signals, one at a time, to represent
the bits that make up the frame.
-
-Wireless
8/3/2019 CA Ex S1M08 OSI Physical Layer
8/74
Physical Layer - Operation
Hc vin mng Bach Khoa - Website: www.bkacad.com
Identifying a Frame Encodes the bits into the signals for a particular medium Distinguish where one frame ends and the next frame begins.
Indicating the beginning of frame is often a function of the Data Link
layer. However, In many technologies, the Physical layer may add its ownsignals to indicate the beginning and end of the frame.
To enable a receiving device to clearly recognize a frame boundary, thetransmitting device adds signals to designate the start and end of a frame.These signals represent particular bit patterns that are only used to denote
the start or end of a frame.
8/3/2019 CA Ex S1M08 OSI Physical Layer
9/74
Physical Layer - Standards
Hc vin mng Bach Khoa - Website: www.bkacad.com
The services and protocols in the TCP/IP suite aredefined by the Internet Engineering Task Force (IETF) in
RFCs.
8/3/2019 CA Ex S1M08 OSI Physical Layer
10/74
Physical Layer - Standards
The protocols and operations of the upper OSI layers areperformed by software and are designed by software engineers
and computer scientists. The services and protocols in the
TCP/IP suite are defined by the Internet Engineering Task Force(IETF) in RFCs.
The Physical layer technologies are defined by organizations
Hc vin mng Bach Khoa - Website: www.bkacad.com
The International Organization for Standardization (ISO)
The Institute of Electrical and Electronics Engineers (IEEE)
The American National Standards Institute (ANSI)
The International Telecommunication Union (ITU) The Electronics Industry Alliance/Telecommunications Industry
Association (EIA/TIA)
National telecommunications authorities such as the Federal
Communication Commission (FCC) in the USA.
8/3/2019 CA Ex S1M08 OSI Physical Layer
11/74
Physical Layer - Standards
Hc vin mng Bach Khoa - Website: www.bkacad.com
Four areas of the Physical layer standards:1. Physical and electrical properties of the media2. Mechanical properties (materials, dimensions, pinouts) of the
connectors
3. Bit representation by the signals (encoding)
4. Definition of control information signals
Hardware components such as network adapters (NICs), interfacesand connectors, cable materials, and cable designs are all specified instandards associated with the Physical layer.
8/3/2019 CA Ex S1M08 OSI Physical Layer
12/74
Physical Layer - Standards
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
13/74
Physical Layer Fundamental Principles
Hc vin mng Bach Khoa - Website: www.bkacad.com
Three fundamental functions of the Physical layer:1. The physical components
2. Data encoding
3. Signaling
8/3/2019 CA Ex S1M08 OSI Physical Layer
14/74
Encoding - Signaling
Encoding A method of converting a stream of data bits into a predefined "code.
Code: grouping of bits used to provide a predictable pattern, canbe recognized by both the sender and the received.
Predictable patterns: distinguish data bits from control bits;provide better media error detection.
Hc vin mng Bach Khoa - Website: www.bkacad.com
nco ng me o s prov e co es or con ro purposes suc asidentifying the beginning and end of a frame.
Signaling The method of representing the bits is called the signaling method.
The Physical layer standards must define what type of signalrepresents a "1" and a "0 on the media. This can be as simple as achange in the level of an electrical signal or optical pulse or a morecomplex signaling method.
8/3/2019 CA Ex S1M08 OSI Physical Layer
15/74
Physical Signaling and Encoding:Representing Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
16/74
Signaling Bits for the Media
The transmission of the frame across the media occurs as a stream of bits sentone at a time.
Bit Time ?
Hc vin mng Bach Khoa - Website: www.bkacad.com
The Physical layer represents each of the bits in the frame as a signal. Each signal placed onto the media has a specific amount of time to occupy
the media. This is referred to as its bit time.
At the Physical layer of the receiving node, the signals are converted back intobits.
The bits are then examined for the start of frame and end of frame bitpatterns to determine that a complete frame has been received.
The Physical layer then delivers all the bits of a frame to the Data Linklayer.
Successful delivery of the bits requires some method of synchronization
between transmitter and receiver.
8/3/2019 CA Ex S1M08 OSI Physical Layer
17/74
Signaling Bits for the Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
Bits are represented on the medium by changing oneor more of the following characteristics of a signal:
Amplitude, Frequency, Phase
8/3/2019 CA Ex S1M08 OSI Physical Layer
18/74
Signaling Bits for the Media
Non Return to Zero (NRZ): the bitstream is transmitted as a series ofvoltage values Logical 0: low voltage
Logical 1: high voltage Suite for slow speed data links Inefficient bandwidth, susceptible
to electromagnetic interference.
Hc vin mng Bach Khoa - Website: www.bkacad.com
The boundaries between individualbits can be lost when long stringsof 1s or 0s are transmittedconsecutively. In that case, no voltage
transitions are detectable on
the media. Therefore, thereceiving nodes do not have atransition to use inresynchronizing bit times withthe transmitting node.
8/3/2019 CA Ex S1M08 OSI Physical Layer
19/74
Signaling Bits for the Media
Manchester Encoding: bitvalues are represented asvoltage transitions.
1: low voltage to highvoltage
0: high voltage to lowvoltage
Hc vin mng Bach Khoa - Website: www.bkacad.com
One voltage transition mustoccur in the middle of each bittime.
Manchester Encoding is
employed by 10BaseTEthernet (Ethernet running at10 Megabits per second).
8/3/2019 CA Ex S1M08 OSI Physical Layer
20/74
Extra: Manchester Encoding
All 10 Mbps forms ofEthernet take octets
received from the MAC
sublayer and perform aprocess called line
encoding (describes
Hc vin mng Bach Khoa - Website: www.bkacad.com
signaled on the wire). The direction of the
edge transition in the
middle of the timing
window to determinethe binary value for that
bit period.
8/3/2019 CA Ex S1M08 OSI Physical Layer
21/74
Extra: NRZ,NRZI vs Manchester
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
22/74
Extra: Bit Rates and Baud Rates
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
23/74
Encoding Grouping Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
24/74
Encoding Grouping Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
One way to provide frame detection is to begin each frame with a pattern ofsignals representing bits that the Physical layer recognizes as denoting thestart of a frame. Another pattern of bits will signal the end of the frame. Signalsbits not framed in this manner are ignored.
Valid data bits need to be grouped into a frame; otherwise, data bits will bereceived without any context to give them meaning to the upper layers of the
networking model. This framing method can be provided by the Data Linklayer, the Physical layer, or by both.
Signal patterns can indicate: start of frame, end of frame, and frame contents.These signal patterns can be decoded into bits. The bits are interpreted ascodes.
The codes indicate where the frames start and stop.
8/3/2019 CA Ex S1M08 OSI Physical Layer
25/74
Encoding Grouping Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
26/74
Encoding Grouping Bits
Code Groups
Code group is a consecutive sequence of code bits that areinterpreted and mapped as data bit patterns.
For example, code bits 10101 could represent the data bits 0011. Code groups are often used as an intermediary encoding technique
for higher speed LAN technologies.
Hc vin mng Bach Khoa - Website: www.bkacad.com
,
synchronization between transmitting and receiving devices areenhanced.
Advantages using code groups include:
1. Reducing bit level error
2. Limiting the effective energy transmitted into the media3. Helping to distinguish data bits from control bits
4. Better media error detection
8/3/2019 CA Ex S1M08 OSI Physical Layer
27/74
Encoding Grouping Bits
Reducing Bit Level Errors
To detect a bit as a 0 or as a 1, the receiver must know how and when tosample the signal on the media. This requires that the timing between thereceiver and transmitter be synchronized.
If too many 1s or 0s being transmitted on the media, the synchronizationmay be lost and individual bit error can occur.
DC balancing ?
Hc vin mng Bach Khoa - Website: www.bkacad.com
Code groups are designed so that the symbols force an ample number of
bit transitions to occur on the media to synchronize this timing. Limiting Energy Transmitted
In many code groups, the symbols ensure that the number of 1s and 0s ina string of symbols are evenly balanced, called DC balancing. Thisprevents excessive amounts of energy from being injected into the mediaduring transmission, thereby reducing the interference radiated from themedia.
In many media signaling methods, a logic level, for example a 1, isrepresented by the presence of energy being sent into the media while theopposite logic level, a 0, is represented as the absence of this energy.Transmitting a long series of 1s could overheat the transmitting laser andthe photo diodes in the receiver, potentially causing higher error rates.
8/3/2019 CA Ex S1M08 OSI Physical Layer
28/74
Encoding Grouping Bits
Distinguish Data from Control
The code groups have 3 types of symbols: Data symbols - Symbols that represent the data of the frame as it is
passed down to the Physical layer.
Control symbols - Special codes injected by the Physical layer used tocontrol transmission. These include end-of-frame and idle media symbols.
Invalid symbols - Symbols that have patterns not allowed on the media.The receipt of an invalid symbol indicates a frame error.
Hc vin mng Bach Khoa - Website: www.bkacad.com
The symbols encoded onto the media are all unique. The symbols representingthe data being sent through the network have different bit patterns than thesymbols used for control. These differences allow the Physical layer in thereceiving node to immediately distinguish data from control information.
Better Media Error Detection
In addition to the data symbols and control symbols, code groups contain
invalid symbols. These are the symbols that could create long series of 1sor 0s on the media; therefore, they are not used by the transmitting node. Ifa receiving node receives one of these patterns, the Physical layer candetermine that there has been an error in data reception.
8/3/2019 CA Ex S1M08 OSI Physical Layer
29/74
Encoding Grouping Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
30/74
Encoding Grouping Bits
Hc vin mng Bach Khoa - Website: www.bkacad.com
In this technique, 4 bits of data are turned into 5-bit code symbols for transmission overthe media system. In 4B/5B, each byte to be transmitted is broken into four-bit pieces or nibblesand
encoded as five-bit values known as symbols. These symbols represent the data tobe transmitted as well as a set of codes that help control transmission on the media.
Among the codes are symbols that indicate the beginning and end of the frametransmission.
Although this process adds overhead to the bit transmissions, it also adds featuresthat aid in the transmission of data at higher speeds.
4B/5B ensures that there is at least one level change per code to providesynchronization.
Most of the codes used in 4B/5B balance the number of 1s and 0s used in each symbol.
8/3/2019 CA Ex S1M08 OSI Physical Layer
31/74
Extra: FastEthernet 100Base-TX
Two separate encodingsteps are used by 100-Mbps Ethernet.
The first part of theencoding uses atechnique called4B/5B
Hc vin mng Bach Khoa - Website: www.bkacad.com
The second part ofthe encoding is theactual line encodingspecific to copper(multi-level transmit-3
levels or MLT-3) orfiber.
8/3/2019 CA Ex S1M08 OSI Physical Layer
32/74
Extra: 4B/5B encoding simulation
http://www.frontiernet.net/~prof_tcarr/4B-5B/
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
33/74
Data Carrying Capacity
Data transfer can be measured in 3 wa s:
Hc vin mng Bach Khoa - Website: www.bkacad.com
1. Bandwidth2. Throughput
3. GoodputBandwidth The capacity of a medium to carry data is described as the raw data
bandwidth of the media.
Digital bandwidth measures the amount of information that can flow from oneplace to another in a given amount of time. Measured in kbps or Mbps.
Determined by a combination of factors: physical media and technologies Physical media properties, current technologies, and the laws of physics all
play a role in determining available bandwidth.
8/3/2019 CA Ex S1M08 OSI Physical Layer
34/74
Data Carrying Capacity
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
35/74
Data Carrying Capacity
Throughput
The measure of the transfer of bits across the media over a given period oftime. Usually does not match the specified bandwidth.
Factors influence throughput: amount of traffic,
type of traffic,
number of network devices encountered on the network.
Throu h ut cannot be faster than the slowest link of the ath from source to
Hc vin mng Bach Khoa - Website: www.bkacad.com
destination.
Goodput
Goodput is the measure of usable data transferred over a given period of time,and is therefore the measure that is of most interest to network users.
Goodput measures the effective transfer of user data between Application
layer entities. Unlike throughput, which measures the transfer of bits and not the transfer ofusable data, goodput accounts for bits devoted to protocol overhead.
Goodput is throughput minus traffic overhead for establishing sessions,acknowledgements, and encapsulation.
8/3/2019 CA Ex S1M08 OSI Physical Layer
36/74
Physical Media
Connectin Communication
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
37/74
Extra: Cable Specifications
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
38/74
Type of Physical Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
The Physical layer is concerned with network media andsignaling. This layer produces the representation andgroupings of bits as voltages, radio frequencies, or lightpulses.
8/3/2019 CA Ex S1M08 OSI Physical Layer
39/74
Type of Physical Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
40/74
Extra:
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
41/74
Extra:
Hc vin mng Bach Khoa - Website: www.bkacad.com
C M di
8/3/2019 CA Ex S1M08 OSI Physical Layer
42/74
Copper Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
Copper: The most common media.
Cables: connect nodes on a LAN to intermediate devices, such asrouters and switches, also connect WAN devices to a data servicesprovider such as a telephone company. Each type of connection andthe accompanying devices have cabling requirements stipulated by
Physical layer standards.
C M di
8/3/2019 CA Ex S1M08 OSI Physical Layer
43/74
Copper Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
Cable types with shielding or twisting of the pairs ofwires are designed to minimize signal degradation dueto electronic noise.
U hi ld d T i t d P i (UTP) C bl
8/3/2019 CA Ex S1M08 OSI Physical Layer
44/74
Unshielded Twisted Pair (UTP) Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
UTP: four pairs color-coded wires
Twisting has the effect of canceling unwanted signals. Avoid interference from internal sources called
crosstalk.
Extra Cross Talk
8/3/2019 CA Ex S1M08 OSI Physical Layer
45/74
Extra: Cross Talk
Hc vin mng Bach Khoa - Website: www.bkacad.com
Unshielded Twisted Pair (UTP) Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
46/74
Unshielded Twisted Pair (UTP) Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
Extra: UTP Straight through Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
47/74
Extra: UTP Straight-through Cable
Host or RouterHub or Switch
Hc vin mng Bach Khoa - Website: www.bkacad.com
The cable that connects from the switch port to thecomputer NIC port is called a straight-through cable.
Extra: UTP Cross over Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
48/74
Extra: UTP Cross-over Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
The cable that connects from one switch port to anotherswitch port is called a crossover cable.
Extra: UTP Rollover Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
49/74
Extra: UTP Rollover Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
The cable that connects the RJ-45 adapter on the com portof the computer to the console port of the router or switchis called a rollover cable.
Extra: UTP Rollover Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
50/74
Extra: UTP Rollover Cable
Console port
Router
Hc vin mng Bach Khoa - Website: www.bkacad.com
Rollover cable
Com1 or Com2 serial port
PC withterminalemulationsoftware
Coaxial Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
51/74
Coaxial Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
Be adapted for different purposes: to attach antennas to wirelessdevices; to carry radio frequency (RF) energy between theantennas and the radio equipment; to transport high RF signals,especially cable television signals.
Shielded Twisted Pair (STP) Cable
8/3/2019 CA Ex S1M08 OSI Physical Layer
52/74
Shielded Twisted Pair (STP) Cable
Hc vin mng Bach Khoa - Website: www.bkacad.com
STP cable shields the entire bundle of wires within the cable as well asthe individual wire pairs. STP provides better noise protection than UTPcabling, however at a significantly higher price.
For many years, STP was the cabling structure specified for use inToken Ring network installations. With the use of Token Ring declining,the demand for shielded twisted-pair cabling has also waned. The new10 GB standard for Ethernet has a provision for the use of STP cabling.This may provide a renewed interest in shielded twisted-pair cabling.
Copper Media Safety
8/3/2019 CA Ex S1M08 OSI Physical Layer
53/74
Copper Media Safety
Hc vin mng Bach Khoa - Website: www.bkacad.com
Fiber Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
54/74
Fiber Media
Fiber-optic cable: uses glass or plastic fibers. The bits are encoded onthe fiber as light impulses. Very large raw data bandwidth rates.
Compared to Copper
Is immune to electromagnetic interference Not grounding issues.
Is thin, low signal loss, so can be operated at much greater lengths
Hc vin mng Bach Khoa - Website: www.bkacad.com
, ,
reach multiple kilometers. More expensive (usually) than copper media over the same
distance (but for a higher capacity)
Different skills and equipment required to terminate and splice the
cable infrastructure More careful handling than copper media
At present, it is primarily used as backbone cabling for high-trafficpoint-to-point connections.
Fiber Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
55/74
Fiber Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
Fiber Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
56/74
Fiber Media
Hc vin mng Bach Khoa - Website: www.bkacad.com
The cladding surrounds the actual glass or plastic fiber andis designed to prevent light loss from the fiber.
Two fibers are required to support full duplex operation.Fiber-optic patch cables bundle together two optical fibercables and terminate them with a pair of standard singlefiber connectors. Some fiber connectors accept both the
transmitting and receiving fibers in a single connector.
Fiber Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
57/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Dispersion is the technical term for the spreading of pulses of light as they travel down the fiber
Extra: Total internal reflection
8/3/2019 CA Ex S1M08 OSI Physical Layer
58/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Extra: Total internal reflection
8/3/2019 CA Ex S1M08 OSI Physical Layer
59/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Extra: Transmitting/Receiving Devices
8/3/2019 CA Ex S1M08 OSI Physical Layer
60/74
g g
Hc vin mng Bach Khoa - Website: www.bkacad.com
Extra: Signals and noise in optical fibers
8/3/2019 CA Ex S1M08 OSI Physical Layer
61/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Extra: Signals and noise in optical fibers
8/3/2019 CA Ex S1M08 OSI Physical Layer
62/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
63/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
64/74
Carry electromagnetic signals at radio and microwavefrequencies that represent the binary digits of datacommunications.
Work well in open environments. However, certainconstruction materials, and the local terrain, will limit theeffective coverage.
Hc vin mng Bach Khoa - Website: www.bkacad.com
common devices as household cordless phones, sometypes of fluorescent lights, microwave ovens, and otherwireless communications.
Further, because no access to a physical strand of media,
devices and users who are not authorized for access to thenetwork can gain access to the transmission, therefore,network security is a major component.
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
65/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
66/74
Four common data communications standards
1. Standard IEEE 802.11 - Commonly referred to as Wi-Fi, is a WirelessLAN (WLAN) technology that uses a contention or non-deterministicsystem with a Carrier Sense Multiple Access/Collision Avoidance(CSMA/CA) media access process.
2. Standard IEEE 802.15 - Wireless Personal Area Network (WPAN)standard, commonly known as "Bluetooth", uses a device pairing
Hc vin mng Bach Khoa - Website: www.bkacad.com
process to communicate over distances from 1 to 100 meters.
3. Standard IEEE 802.16 - Commonly known as WiMAX (WorldwideInteroperability for Microwave Access), uses a point-to-multipointtopology to provide wireless broadband access.
4. Global System for Mobile Communications (GSM) - Includes Physicallayer specifications that enable the implementation of the Layer 2General Packet Radio Service (GPRS) protocol to provide datatransfer over mobile cellular telephony networks.
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
67/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
In general, a wireless LAN requires the following networkdevices:
Wireless Access Point (AP) - Concentrates thewireless signals from users and connects, usually
through a copper cable, to the existing copper-basednetwork infrastructure such as Ethernet.
Wireless NIC adapters - Provides wirelesscommunication capability to each network host.
Wireless Media
8/3/2019 CA Ex S1M08 OSI Physical Layer
68/74
IEEE 802.11a - Operates in the 5 GHz frequency band, speed up to 54Mbps, small coverage area; less effective at penetrating buildingstructures. Not interoperable with the 802.11b and 802.11g standards.
IEEE 802.11b ( Wi-Fi )- Operates in the 2.4 GHz frequency band,
speed up to 11 Mbps. Longer range and better able to penetratebuilding structures than devices based on 802.11a.
IEEE 802.11g - Operates in the 2.4 GHz frequency band, speed up to
Hc vin mng Bach Khoa - Website: www.bkacad.com
same radio frequency and range as 802.11b but with the bandwidth of
802.11a. IEEE 802.11n - Is currently in draft form. The proposed standard
defines frequency of 2.4 Ghz or 5 GHz. The typical expected data ratesare 100 Mbps to 210 Mbps with a distance range of up to 70 meters.
The benefits are evident, especially the savings on costly premiseswiring and the convenience of host mobility. However, network administrators need to develop and apply stringent
security policies and processes to protect WLANs from unauthorizedaccess and damage.
Media Connectors
8/3/2019 CA Ex S1M08 OSI Physical Layer
69/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Media Connectors
8/3/2019 CA Ex S1M08 OSI Physical Layer
70/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
It is essential that all copper media terminations be of high
quality to ensure optimum performance with current andfuture network technologies.
Improper cable termination can impact transmissionperformance
Media Connectors
8/3/2019 CA Ex S1M08 OSI Physical Layer
71/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Media Connectors
8/3/2019 CA Ex S1M08 OSI Physical Layer
72/74
Straight-Tip (ST) (trademarked by AT &T) - a very common bayonetstyle connector widely used with multimode fiber.
Subscriber Connector (SC) - a connector that uses a push-pullmechanism to ensure positive insertion. This connector type is widelyused with single-mode fiber.
Lucent Connector (LC) - A small connector becoming popular for usewith single-mode fiber and also supports multi-mode fiber.
Hc vin mng Bach Khoa - Website: www.bkacad.com
Three common types of fiber-optic termination and splicing errors are: Misalignment - the fiber-optic media are not precisely aligned to
one another when joined.
End gap - the media do not completely touch at the splice orconnection.
End finish - the media ends are not well polished or dirt is presentat the termination.
Summary
8/3/2019 CA Ex S1M08 OSI Physical Layer
73/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
8/3/2019 CA Ex S1M08 OSI Physical Layer
74/74
Hc vin mng Bach Khoa - Website: www.bkacad.com
Recommended