View
216
Download
0
Category
Preview:
Citation preview
Business Units
Lighting systems→ an independent business unit for outdoor lighting
Vehicle modules→ AntiGlareLight - ABL (in German: AntiBlendLicht) Optical safety system for retrofit in every car, transporter and truck
Process engineering→ an independent business unit for the market of optical systems for digital quality assessment of products withrespect to their surface quality
Uwe Braun GmbH Locations
Our headquarters is located in Lenzen (Elbe)on the axis Hamburg - Berlin.
You can find us likewise in Mecklenburg-West Pomerania, Saxony, Thuringia and Brandenburg, Baden-Württemberg, Bavaria, North Rhine-Westphalia, France, Czech Republic, Spain, China, Brazil, Mexico, South Korea and USA.
uwe braun GmbH
Quality-Management-System DIN EN ISO 9001
Certification by TÜV-CERT
Europe-wide certification by ENEC
ETL-Certification (for Canada & US-market)
uwe braun GmbH
References
Competitive Advantages
Uwe Braun’s Unique Competitive Advantages Include:
Substantial energy and testing efficiencies due to “dimmable” and “digital” surface-control optics containing integrated & patented lens-prism-optics with intelligent control systems
Highest level of color-matching effectiveness via “off-color” lighting
Lower thermal load due to optimized housings
Ergonomic working conditions thanks to lower glare
Dramatically reduced electrical consumption and low maintenance costs
In our laboratories, we develop modern, innovative illuminating systems for your products!
We are your partner in the matter of visual surface control and automatic quality assurance.
Innovative illuminating engineering
LPO
SLOLPS100
OCO
Visual defect detection
LPS 50Design, Press shop, Rawshop, Primer
LPS 100Paintshop; Finish
LPS 100/18Paintshop; Finish
WLO 40Paintshop; Audit;Rawshop; Finish
Principle Successive contrast optic
Successive contrast optic
Successive contrast optic
Alternation-Line-Optic,raised contrast
Fields of application
for the inspection of surfaces with medium to weak reflection characteristics
for the inspection of surfaces with medium to good reflection characteristics
for the inspection of surfaces with medium to good reflection characteristics
for the inspection of surfaces with weak to medium reflection characteristics
Assembly 4 x 36 W,4 x 54 W,4 x 58 W,4 x 80 W,
3 x 36 W, 3 x 58 W
3 x 18 W 4 x 36 W, 4 x 54 W,4 x 58 W, 4 x 80 W
Products – OKO (Surface control optics)
LLOPaintshop; Audit
AROSpot repair
CCOColorMatching; Color audit; Design; Finish
OCOPaintshop
Principle Reflection of scattered light
Asymmetrical reflector system
Variable change of color temperature from 2700 to 6500 Kelvin
Bright-field Optic
Fields of application
for the inspection of surfaces with good to very good reflection characteristics (The optic makes high-polish surfaces appear matt)
for the inspection of surfaces with good reflection characteristics; applicable in paint booths
for the inspection of surfaces with good reflection characteristics; specially suitable for color matching of painted surfaces
for the inspection of surfaces with good reflection characteristics
Assembly 2 x 36 W,2 x 58 W
3 x 36 W, 3 x 54 W, 3 x 58 W,3 x 80 W
8 x 36 W,8 x 58 W
4 x 36 W, 4 x 58 W
Products – OKO (Surface control optics)
MRO Paintshop; Audit
PVOUnderbody protection
VAO Press plant; Rawbody;Paintshop; Audit
VAO 2Paintshop; Audit
Principle Successive contrast optic with color temperature control from 2700 to 6500 Kelvin
Optic for successive and simultaneous contrasts
Prism contrast optic Prism contrast optic
Fields of application
for the inspection of surfaces with good reflection characteristics; Error detection coupled with color evaluation
for the detection of PVC-pollutions on surfaces
for the inspection of surfaces with medium to good reflection characteristics
for the inspection of surfaces with weak to medium reflection characteristics
Assembly 4 x 36 W,4 x 58 W
3 x 36 W, 3 x 58 W
1 x 36 W, 1 x 54 W,1 x 58 W, 1 x 80 W
2 x 36 W, 2 x 54 W,2 x 58 W, 2 x 80 W
Products – OKO (Surface control optics)
SLOPaintshop
LPOPaintshop; Audit;Spot Repair; Finish
UVOPaintshop
FLOPress plant
HSPaintshop
Principle Multi-selective sunlight projection
Multi-selective sunlight projection
Fluorescence Optic
Parabolic optics with spherical head mirror, optionally with screen printing elements
Simple sunlight projection
Fields of application
for the detection of polishing errors and holograms
for the detection of polishing errors and holograms
for the inspection of surfaces with good reflection characteristics; especially suitable for effect paint, textiles and plastic with white flaws
for the inspection of surfaces with weak reflection characteristics
for the inspection of surfaces with good reflection characteristics
Assembly 5 x 70 W,6 x 70 W
5 x 35 W,6 x 35 W
1 x 36 W,1 x 58 W,1 x 80 W
1 x 54 W,1 x 80 W
1 x 75 W
Products – OKO (Surface control optics)
Lifetime: ca. 12.000 hours of operation
→ In order to keeping the quality to a constant high level, the illuminant should be replaced every 2 years at the latest.
LPS 100
2 x Osram Lumilux L58/865 (color temperature 6500 K) 1 x Osram Lumilux L58/840 (color temperature 4000 K)
Illuminants in the OKO‘s (Surface Control Optics)
CCO
4 x Osram Lumilux L58/827 (color temperature 2700 K) 4 x Philips Master TL-D 90 Graphica 58W/965 (color temperature 6500 K)
Illuminants in the OKO‘s (Surface Control Optics)
AST 3.11(Automatic controller)
HAST 2.0(Semiautomatic controller)
Manual Control Unit(Manual Control 1.2)
• is used to support the automatic adaption of the illumination level of a lighting system
• different illumination levels will be determined in order to adapt the light to the lightness of the object of interest
• various luminance-sensors are in use
In greater systems which do support moved objects, individual settings of single OKO’s or groups of refulgence will support the necessary illumination with respect to the position of the object under test.
• manual control of light scenarios in lighting systems
• light scenarios can be programmed • can be used anywhere that variable
lighting intensities are required
• is used to manually control all OKO’s in a lighting system
• It does support any application being in need of flexible (variable) illumination levels
Products - Controller
Lighttunnel, VW Dresden
Audit Finishline, VW Bratislava
Audit, Bugatti Molsheim
exact detection of surface defects on basis of the analysis of reflection imagesErgonomic working with less glare Energy efficiency by intelligent control systems
Lighttunnel, Audi Neckarslum
Surface control system
Surface control system
Surface control system
Light-Density-AttachmentOKO
Automatic controller(AST 3.11)
Direction of Transport
V= 0...10 V
(500-3500 lux)Reference light
Sensor for luminance
Principle of the light-tunnel
Floor
Surface control system
Defect detection:
Dents and pits
LPS 50/80
Project BMW Dingolfing
Project SCANIA – Audit rawbody cabin
Hyundai, Ostrava (Czech Republic)
Inspection zone (Primer)
LPS50/58
80 OKO + semiautomatic controller
Inspection zone
LPS100/58
35m
KIA, Zilina (Slovakia)
Raw body line
LPS50/80
Inspection Zone
LPS100/58
Scope of delivery:OKO‘s (Surface control optics)Automatic / semiautomatic controllerWiring
• following the visual principle of off-color reinforcement for optimal color-matching• reproduction of standard illuminant D65, F11 (TL84)• real 24-hour-reproduction of natural day light (2700 to 6500 K)
CCO
ColorMatchingSystem
ColorMatchingSystem
CIE-Modell
Color Matching System
• 57 x CCO‘s (ColorControlOptics)• burned in and spectrally measured
illuminant• 1 x semiautomatic color controller• steel construction
ColorMatchingSystem
Characteristic
• D65, F11 (TL84), 2700 K (HAFST 2.0)• illuminant: between 8.000 - 18.000 Lux• special reflectors• all CCO‘s are dimmable → energy-efficient• choice between :
semiautomatic color controller - HAST 2.0Automatic color controller – AST 3.11 (The color of the vehicle is detected. The most effective off-color is then determined and set automatically to optimize color match processing.)
Vehicle
ColorMatchingSystem
ColorMatchingSystem
Additional Options
LensPrismOpticMultiscreen
Color Detector
ColorMatchingSystem
References
ColorMatchingSystem
• Mercedes Benz, Ludwigsfelde• AUDI, Neckarsulm• VW Chattanoga• VW, Brüssel• VW, Changchun• VW, de Mexico• VW, India• VW, Shanghai• VW, Dresden• VW, Wolfsburg• K.face, Heiligengrabe• Merck KgaA, Germsheim
Your partner in planning and consultation
Assessment of vertical surfaces
Your partner in planning and consultation
Assessment of horizontal surfaces
Your partner in planning and consultation
Assessment of horizontal and vertikal surfaces
Your partner in planning and consultation
In-house structural steel work
Your partner in planning and consultation
Service Realisation
Planning
Your added value!!!
All the competence from a single source…
Your partner in planning and consultation
Results
Energy efficiency due to dimmable surface control optics andintelligent control systems
Lower thermal load due to optimized housings
Ergonomic working conditions thanks to lower glare
Low maintenance costs
MADE IN GERMANY
Management BoardMartin Dolling
Manufacturing Plant Lenzen ( Sales, Engineering, R&D, ProductionIndustriegebiet Lange Felder • D-19309 Lenzen (Elbe) Phone: +49-38792-985-0 • Fax: +49-38792-985-33
Main Office Potsdam (Management Board)Am Neuen Markt 9c • D-14467 PotsdamPhone: +49-331-201489-10 • Fax: +49-331-201489-29
E-Mail: info@uwe-braun.de • Internet: www.uwe-braun.de
Contact
North American Agent:
20820 W. Western DriveBuckeye, AZ 85396
pbeierling@gbsupport.comwww.gbsupport.com
Peter Beierling
+1-623-398-6295 P+1-248-225-3396 C+1-623-258-4350 F
Recommended