Bruce robbins resume

Bruce Robbins, 8364 W Sunnyside, Norridge, IL 60706, Phone (708)-456-4196brucer.robbins7@gmail.com

Seeking position as…Electrical Panel Builder, Mechanic, Electrician, Warehouse, Customer Service, Technician 1 of 2

Electrical and Mechanical Mechanic with years of progressive hands-on experience in fast paced manufacturing environments. Responsibilities have included working with 480/240 3 phase, 120VAC, 24 VDC wiring and various types of controls, panel building, and assembly of large machinery. Strong knowledge of pneumatics, hydraulics, motor drives, AC/DC motors and servo drives. Experience has led to a strong ability to read schematics/prints and troubleshoot/repair PLC’s hardware and software (Allen Bradley). Familiar with quality control practices and procedures including special process control (SPC), sampling plans and JIT. Power transmission systems, plumbing, welding, pipe fitting.AP Engineering, Inc., Tower Lakes, IL 1999 to 2008Outsourcing company, performed service, repairs and maintenance for machinery in manufacturing companies in ChicagolandField Service- Maintenance Electrician/Mechanic

Perform troubleshooting/repairs on punch presses, schroll shears, seamers, welders, litho print machines, aerosol can lines, oblong can lines, palletizers, and stretch-wrap machines

Electro-mechanical assembly of press brakes, shears, roll forming and steel slitting machinery Panel building, wiring, mechanical assembly Performed electrical factory maintenance, tuned motors, order material, assembled hydraulic/pneumatic lines and wired

voltages from 24 volts DC to 480 three phase Worked on Inline/Offline graphic arts finishing equipment

RDI GROUP, Itasca, IL 1997 to 1999Roofing, steel slitting and rim making machineryElectrical-Mechanical Technician/Machine Builder

Factory maintenance Worked on steel slitting, roofing, and rim making machines. Run and bend conduit Installed “J” boxes, sensors, AC/DC drives Wired control panels/machines, 480/240/120/24 wiring, I/O checks on PLC’s, and hydraulics/pneumatics wiring Fabrication of brackets to hold conduit runs and designed conduit runs on machinery.

Tenco, Elk Grove Village, IL 1988 to 1997 Custom automated CNC machine toolsElectrical-Mechanical Technician/Machine Builder

Factory maintenance Worked on custom automated CNC machine tools (drilling, tapping and boring) Performed product testing, I/O check outs, wired control panels/machines, 480/240 3PH, 120 VAC wiring, mounted

disconnect switches, Installed wire sensors, wired hydraulics/pneumatics, pull wire, installed machine parts, installed conduits

AIRCO, Chicago, IL 1979 to 1988Welding machinesQC Tester/Inspector

Sampling plans, GD&T 1st piece, final Product testing, 1st piece run-off Hipot/Megger test

Douglas Dunhill, Oak Forest, IL 1972 to 1979WarehousePower Tool Mechanic/Electronics Tech

Repair power tools, multi-band radios, and TV’s General warehouse duties Sales & service

Blue “M” Electric Company, Blue Island, IL 1970 to 1972Environmental Test ChambersMachine Builder/Electrical Tech/Customer Service

Build, test, process orders, parts, and troubleshooting via phone Wire panels/machines QC of panels/machines

Bruce Robbins, 8364 W Sunnyside, Norridge, IL 60706, Phone (708)-456-4196brucer.robbins7@gmail.com

2 0f 2 EducationHane, PLC Maintenance/Edit/Troubleshoot, Elgin, IL, Certified 2005 Daley College, Electronics/Physics, Chicago, IL 1989 to 1990Moraine Valley College, Electronics, Palos Hills, IL 1978 to 1979NAS/Memphis, 6 months military electronics, Millington, TN, Diploma 1970 to 1971Branham High, 2 years electronics, San Jose, CA, Diploma 1970 MilitaryNAS/Glenview, Marine Corps Air Reserve, Glenview, IL 1970 to 1976

A-4/C-130 Electrician, Honorable DischargeComputer

MS Office, MS Word, Internet, R/S Logic, Email 2000 to present