View
10
Download
1
Category
Preview:
Citation preview
BOLO COURSE CATALOG CLASSROOM AND WEBINAR TRAINING P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020
Catalog Version P2 BOLO Course Catalog, published September 2020, version 2
Copyright Notice 2020 P2 Energy Solutions. All rights reserved. No reproduction without written permission.
While all reasonable care has been taken in the preparation of this document, no liability is accepted by the authors, P2 Energy Solutions, for any errors, omissions or misstatements it may contain, or for any loss or damage, howsoever occasioned, to any person relying on any statement or omission in this document.
Any questions regarding this document should be forwarded to:
P2 Energy Solutions 1670 Broadway, Suite 2800 Denver, CO 80202 United States
Table of Contents
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020
BOLO Training Program ......................................................................... 5 Training Website ......................................................................................... 5
Training Options ......................................................................................... 5
How to Register for a Scheduled Training Webinar ................................................. 6
All Training: Cancellation, Refund and Complaint Resolution Policies .......................... 6
Class Fees ................................................................................................. 7
Coursed Listings by Module .................................................................... 8
Training Webinars – Course Descriptions ................................................... 10 1099 Processing Refresher ............................................................................. 10
1099 Online Series ...................................................................................... 11
Accounts Payable ACH Process........................................................................ 12
Accounts Payable Entry ................................................................................ 13
Accounts Receivable ................................................................................... 14
Advanced Query Online Series ........................................................................ 15
Audit Logging ..................................................................................................... 18
AFE Introduction (Capital Budgeting) ................................................................ 17
Basic Security System Administration ................................................................ 18
Beginning Query Online Series ........................................................................ 19
BOLO User Interface (UI) Navigation .................................................................. 20
Cash Receipts ........................................................................................... 21
CDEX ...................................................................................................... 22
Cost Centers ............................................................................................. 23
Escheat ................................................................................................... 24
Financial Report Builder (FRB) Introduction ........................................................ 25
General Ledger .......................................................................................... 26
GL Coding Controls and Approvals ................................................................... 27
Land Division of Interest- Session I ................................................................... 28
Land Division of Interest- Session II .................................................................. 29
Lease Payment Process ................................................................................ 30
Menus and Profiles...................................................................................... 31
Name and Address ...................................................................................... 32
Table of Contents
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020
Ownership Changes for Land and Accounting ....................................................... 33
Reporting Hierarchies/Drill Down .................................................................... 34 Spreadsheet Interface (SSI) Introduction ............................................................ 35
Classroom Instruction – Course Descriptions .............................................. 36 Accounts Payable (AP) ................................................................................. 36
Accounts Receivable ................................................................................... 37
Advanced Query ........................................................................................ 38
AFE Introduction ........................................................................................ 39
Beginning Query ........................................................................................ 40
Cash Disbursements .................................................................................... 41
Cash Receipts ........................................................................................... 42
CDEX ...................................................................................................... 43
Asset Tracking and DD&A Processing ................................................................ 44
Division Orders .......................................................................................... 45
DOI and Ownership Changes........................................................................... 46
Fast Track ................................................................................................ 47
Financial Report Builder ............................................................................... 48
General Ledger .......................................................................................... 49
GL Coding Controls and Approvals ................................................................... 50
JIB Setup and Processing .............................................................................. 51
Land Overview .......................................................................................... 52
Land Query .............................................................................................. 53
Landman 101 Training ................................................................................. 54
Revenue Accruals ............................................................................................. 55
Revenue Adjustments .................................................................................. 56
Revenue Processing .................................................................................... 57
Revenue Setups ......................................................................................... 58
Spreadsheet Interface ................................................................................. 59
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 5
BOLO Training Program
Training Website
Visit the BOLO Training webpage for current webinar Calendars and Course Catalog with complete information about all BOLO training options, including course descriptions and pricing information.
Training website link: http://www.p2energysolutions.com/services/training/bolo-training
Training Options
P2 offers the following types of BOLO training:
• Training WebinarsPlease refer to the Calendar on the P2 Training website for a schedule of upcomingwebinars: www.p2energysolutions.com > Services > Training > BOLO
See the Training Webinars – Course Descriptions section of this catalog for completecourse descriptions of webinar classes.
• Classroom InstructionClasses may be held at a P2 Training Facility or custom-scheduled at client offices. Seecourses in this catalog with Delivery of “Group Live” for complete coursedescriptions.
Contact the P2 Training group at p2training@p2energysolutions.com to schedule aclass.
• Custom-scheduled TrainingYou may custom-schedule classes to be held at your company offices or at our Denveror Houston training centers. You can also custom-schedule training webinars. Toarrange a custom class, contact the P2 Training Department atp2training@p2energysolutions.com.
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 6
How to Register for a Scheduled Training Webinar
Webinar sessions are self-registering through the p2energysolutions.webex.com website. To obtain a password or for questions, please email p2Training@p2energysolutions.com.
All Training: Cancellation, Refund and Complaint Resolution Policies
For your convenience, we will bill you for your class at the end of the month following the class date. In the event that you must cancel your registration, send email to P2training@p2energysolutions.com two business days or more prior to the webinar start time, to avoid being billed for the webinar. For more information regarding administrative policies such as complaint and refund, please contact the P2 Training Department at p2training@p2energysolutions.com.
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 7
Class Fees
Training Pricing Offering Pricing Discounts Conditions
Webinar Training Class
If any customization is done to standard classes, additional charges are applicable
$250/hour - 1 connection
Standard consulting hourly rate for any customizations to the webinar that might require customized set up, development and planning
Clients with multiple locations attending must have someone from each site register for a connection.
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 8
Coursed Listings by Module
Classes in this training guide are described under the Training Webinars section (alphabetically) or under the Classroom Training section (alphabetically).
The following table lists classes by BOLO module (continued on next page).
MODULE CLASS TITLE TYPE Accounts Receivable Accounts Receivable Webinar and classroom Asset Tracking and Material Transfer
Asset Tracking and DD&A Processing Webinar and classroom, customized
Capital Budgeting AFE Introduction Webinar and classroom Cash Disbursements 1099 Online Refresher Webinar
1099 Online Series Webinar Cash Disbursements Classroom
Core BOLO User Interface Navigation Webinar Cost Centers Webinar Fast Track Classroom Name and Address Webinar
Core Accounting AP ACH Process Webinar Accounts Payable Entry Webinar Accounts Payable (AP) Classroom Cash Receipts Webinar and classroom General Ledger Webinar and classroom GL Coding Controls and Approvals Webinar and classroom Joint Interest Billing (JIB) Setup
and Processing Classroom
Land DOI and Ownership Changes Classroom Division Orders Classroom Land Division of Interest – Session I Webinar Land Division of Interest – Session II Webinar Land Overview Classroom Land Query Classroom Landman 101 Classroom Lease Payment Process Webinar Ownership Changes for Land and Accounting
Webinar
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 9
The following table lists classes by BOLO module (continued from the previous page).
MODULE CLASS TITLE TYPE Regulatory Reporting
Escheat Webinar (custom schedule)
Reporting Advanced Query Classroom Advanced Query Online Series Webinar Beginning Query Classroom Beginning Query Online Series Webinar Financial Report Builder (FRB) Classroom Financial Report Builder (FRB) Intro Webinar Reporting Hierarchies/Drill Down Webinar (custom schedule) Spreadsheet Interface (SSI) Classroom Spreadsheet Interface (SSI) Intro Webinar
Revenue CDEX Webinar and classroom Revenue Adjustments Classroom Revenue Processing Classroom Revenue Setups Classroom
System Administration
Audit Logging Webinar Basic Security System Administration Webinar Menus and Profiles Webinar
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 10
BOLO
P2 Products Course Catalog
Training Webinars – Course Descriptions
The following webinars are scheduled periodically and a calendar can be viewed on the P2 BOLO Training website: www.p2energysolutions.com > Services > Training > BOLO. You may also custom-schedule webinar training, and the contents may be customized to your needs. To arrange a custom class, contact the P2 Training group at p2training@p2energysolutions.com.
1099 Processing Refresher
Module: Cash Disbursements
The 1099 Online Refresher is designed for those who have attended the Bolo 1099 Series in the past and need a refresher or want to learn about updates for the current tax year.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• 1099 Preparation• Reports to Review• Transaction Posting• Transaction Maintenance• Form Creation• Media Creation (Creating the EDI file for the IRS FIRE System)• Updates for the 2020 Tax Year
Class Level: Intermediate .................... Pre Req: 1099 Online Series or comparable experience
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 11
BOLO
P2 Products Course Catalog
1099 Online Series
Module: Cash Disbursements
The 1099 Online series is a multi-session webinar series, taught in two 2 hour sessions. This course covers 1099 Processing in-depth and includes: 1099 Preparation, Post and Review Transactions, 1099 Transaction Maintenance, and 1099 Statement Printing.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives 1099- 1099 Preparation • Set up applications for tax year and company• Set up an owner for back up withholding1099- Post and Review Transactions• Post Transactions to 1099.TRANS(YY) file• Review transaction posting
1099- 1099 Transaction Maintenance • Transactions being reported to the IRS• Create Pseudo check for 1099 information• Common transaction scenarios• 1099 upload1099- Statement Printing• Process to post information to the 1099.FORMS (YY)• View generated 1099 statements• Using Filter Raw Print• Transmitting the MAG file to the FIRE IRS system
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 12
Class Level: Intermediate ............................................................ Pre Req: BOLO UI Navigation
Class Length: 3 hours ............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
Accounts Payable ACH Process
Module: Core Accounting
The BOLO software supports Automated Clearing House (ACH) payments through the Accounts Payable module and the Revenue module. The ACH process allows electronic transfer of funds from the client’s designated AP financial institution to the vendor’s designated ACH financial institution. In this one-hour Webinar session we will demonstrate setting up employee expenses for ACH.
This webinar is available for custom schedule. To schedule the class, email P2Training@p2energysolutions.com. This webinar includes a training guide download.
Objectives
• Enable the AP financial institution for ACH• Create Special Handling Codes to support the AP ACH process• Create a financial institution for a vendor• Enter an invoice to be paid through the ACH process• Generate the ACH file for the AP module
Class Level: Basic ............................................................................................. Pre Req: AP Entry
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 13
BOLO
P2 Products Course Catalog
Accounts Payable Entry
Module: Core Accounting
In this one-hour Webinar session we review the invoice register and invoice data entry screen. Templates will be discussed, and basic AP reports reviewed. This class may be custom scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Invoice register• AP invoice data entry• Invoice templates• Invoice reversal• Vendor inquiry• AP sub-ledger report• Accounts Payable coding edit report
Class Level: Basic ............................................................................ Pre Req: Name and Address
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 14
BOLO
P2 Products Course Catalog
Accounts Receivable
Module: Accounts Receivable
In this one-hour Webinar session we cover system setups, entering manual accounts receivable invoices, cash calls and reports. You will review the best reports to assist you in analyzing your open receivables and how to make adjustments to manual invoices and cash calls. This class may be custom scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Understand and utilize AR System setups and defaults that effect processing and internalprocedures
• Create a new customer in the AR1210 application• Be able to generate an AR Invoice• Perform a cash call invoice• Print manual invoices• Understand and utilize Aging and sub-ledger reports• Perform adjustments to manual invoices and cash calls
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 15
BOLO
P2 Products Course Catalog
Advanced Query Online Series
Module: Reporting
The Advanced Query on-line series is a multi-session webinar series, taught in two 1.5 hour sessions. The prerequisite is the Beg Query Online Series or Beginning Query. Participants will increase their ad hoc reporting skills by participating in engaging exercises. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Review of Beg Query• Advanced Formatting• Advanced Computation• Advanced Commands• Creating a Saved Query• Querying multi values• Building A dictionary item• Creating an ad hoc virtual dictionary item
Class Level: Advanced .................................................................................. Pre Req: Beg Query
Class Length: 3 hours .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 16
BOLO
P2 Products Course Catalog
Audit Logging
Module: System Administration
The Audit Log module is a separately licensed module. This session is designed to review the setups and benefits of using audit logging to meet SOX compliance.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives • Benefits of Audit Logging• Role of Before Update and Before Delete triggers• Audit log profile setup• Audit Log Report for reporting requirements
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 17
BOLO
P2 Products Course Catalog
AFE Introduction (Capital Budgeting)
Module: Capital Budgeting
The Capital Budgeting System tracks how your company tracks and reports Authorization for Expenditure (AFE) information. In this session we will look at the maintenance setup and reporting of AFEs. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Benefits of AFE's• AFE profiles• Control coding• AFE reports
Class Level: Basic ...................................................................................... Pre Req: Cost Centers
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 18
BOLO
P2 Products Course Catalog
Basic Security System Administration
Module: System Administration
The BOLO software includes tools for the System Administrator to handle user and global settings, review locks and error messages, review licensing, and control required prompts. In this session we will work with the individual applications and reports that assist the System Administrator in troubleshooting and monitoring the activities in the BOLO software.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives • Change/Review system and user global settings• Set up the Approval process• Handle processes and user messages• Review locks• Check license usage• Set up prompt-level security
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 19
BOLO
P2 Products Course Catalog
Beginning Query Online Series
Module: Reporting
The Beginning Query online series is a multi-session webinar series, taught in two 1 hour sessions. The class is designed to teach end users the power of the Advanced Searches and Query Interface in ad hoc reporting. See the agenda for specific topics. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
Session One: • Advanced searches including lookup fields; Cross reference window; Export to Excel; Create
and manipulate data in saved lists• Basic Query including six step process in creating a query; Query sets; Generate comments
and search comments; Dictionary items and file names; LIST statement on NAME file; Exportquery to results tab, report viewer, and Excel; Query security
Session Two: • Working with Verbs including Select statement; Count records in a file; Sum and Total
commands; Detail suppress for summary and detail queries; Break.on and Sort• Formatting including Column spacing; Basic headings; Prompt for values; andCombination
queries
Class Level: Intermediate .................................. Pre Req: UI Navigation, Name Address Master
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 20
BOLO
P2 Products Course Catalog
BOLO User Interface (UI) Navigation
Module: Core
The BOLO User Interface (UI) Navigation course is designed to review how to efficiently navigate through the BOLO Software, making data entry and searching for assistance a snap. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Main menu functions• BOLO's application nomenclature• Menu shortcuts• Locating applications using find, short cuts, and keywords• Different types of data fields and functions• Basic data entry• Advanced searches• Working with Canned Reports
Class Level: Basic .................................................................................................. Pre Req: None
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 21
BOLO
P2 Products Course Catalog
Cash Receipts
Module: Core Accounting
This one-hour webinar will walk participants through the Cash Receipts Process and setup screens. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Company set up for cash receipts• Apply and approve cash receipts• Research and verification of reports• Cash receipts process
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 22
BOLO
P2 Products Course Catalog
CDEX
Module: Revenue
BOLO provides a separately licensed tool to automate the receipt and distribution of Revenue Check Detail. The CDEX module allows users to review the check prior to creating a batch, prevent duplicate check input, create revenue vouchers, and create CDEX files to send check data to owners/payees. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• CDEX setup screens• Set up company to receive and send CDEX files• Receive and process a CDEX file• Process and send a CDEX file• Run CDEX reports
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 23
BOLO
P2 Products Course Catalog
Cost Centers
Module: Core
Cost Centers are buckets that are used to capture costs and statistical data for leases, prospects, areas, districts, basins, properties, and fields. Cost Centers are used in reporting and coding controls. It is important that clients understand the purpose of Cost Centers and their impact on the BOLO software. This online session will discuss cost centers and how they are used in the Bolo software.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Cost center definition• Cost center types• Cost center categories• Cost center reports• Cost center imports
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 24
Escheat
Module: Regulatory Reporting
The Escheat module is a separately licensed module that allows BOLO users to track and report on owners that meet the Agency definition as Escheatable. Please verify that your company has licensed this module before registering this course.
This webinar is available by Custom schedule only.
Objectives
• Students will be able to set up the Agency for Escheat.• Students will be able to set up owners for Escheat.• Students will be able to maintain owner status and remark codes for the Escheat Process.• Students will be able to produce the report for Escheat to the Agency.
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 3 hours............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 25
BOLO
P2 Products Course Catalog
Financial Report Builder (FRB) Introduction
Module: Reporting
The BOLO software is delivered with a report writing tool and delivered the templates. The Report Writer allows users to create custom canned reports that are run from the BOLO Menu. In this course we will focus on the basics of the report tool writer. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives • Access GL1280E- Financial Report Parameters Maintenance• Access 'I' menu type templates• Understand the User Parameters defined in the INC.1 template• Make a copy of a delivered template• Place the copy of the delivered template onto a user's menu panel• Dissect columns ,rows, and headers on the delivered INC.1 template
Class Level: Advanced ................................................................................. Pre Req: Intro to SSI
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 26
General Ledger
Module: Core Accounting
This class provides an overview of the Bolo General Ledger module. It covers General Ledger (GL) Setup, data entry, processes (GL2350 and GL2315) and reports. This class may be custom scheduled as classroom or webinar training.
Objectives
• Purpose and functions of the GL module• General Ledger setup and programs required• GL Data Entry programs and their purpose• Standard GL reports and how to access them• How to run GL Processes: P&L Close process and Automated Account Analysis process
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 27
GL Coding Controls and Approvals
Module: Core Accounting
General Ledger (GL) Coding Controls and Approvals is geared towards accounting staff and deals with controls as they pertain to the general ledger, accounting period, and chart of accounts. We cover approval setup, approval processing and posting options. This class may be custom scheduled as classroom or webinar training.
Objectives
• Coding requirements• Data entry• Required information• Coding restrictions• Approval Setup• Approval Processing• Posting Options
Class Level: Intermediate ........................................................... Pre Req: Accounting Overview
Class Length: 1.5 hours ............................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 28
BOLO
P2 Products Course Catalog
Land Division of Interest- Session I
Module: Land
Divisions of Interest are a major culprit, making our industry and our jobs so complex. This course will introduce the various types of division of interest decks that can be built in the system: Land, Master, Revenue, and JIB. We will analyze how the calculations are performed, with a particular focus on building a land (lease) and master (well) burden-based deck.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Understand the definition of a Division of interest deck• Learn how to calculate and capture division of interest decimals• Understand the differences and similarities between Land, Master, Revenue and JIB decks• Learn the difference and benefits of an NRI and Burden-based Master or Revenue deck
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 29
BOLO
P2 Products Course Catalog
Land Division of Interest- Session II
Module: Land
This Land Division of Interest class supplements the Division of Interest Overview class with land- specific topics. Participants will learn how to create Well and Unit division orders from start to finish. This class has a particular focus on Master decks, which allow for capturing fractional interests and cloning to Revenue and JIB decks. They will learn how to create NRI and Burden- based decks and an understanding of components will be provided.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Build Burden-based and NRI division orders• Utilize the fractional interests Master deck feature• Copy division orders• Understand how to capture various components/deductions• Clone Master decks to JIB and Revenue decks• Copy Master decks from JIB and Revenue decks
Class Level: Intermediate ....................................... Pre Req: Land Division of Interest-Session I
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 30
BOLO
P2 Products Course Catalog
Lease Payment Process
Module: Land
Making Lease payments on a timely basis ensures that you do not lose a lease. The Lease Payment Process session is designed to walk you through the steps to verify and process payments due, troubleshoot problems, and create payments and financial entries. This session is appropriate for Land and Accounting personnel involved in the Lease Payment Process.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Define Lease Payments• Build Lease Payments in BOLO• Review Monthly Reports• Step Through the Lease Payment Process• Describe Voids and Reversals
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 31
BOLO
P2 Products Course Catalog
Menus and Profiles
Module: System Administration
In this session we will review the fields and tabs required to complete a BOLO user profile. Participants will create a template user to base profiles and menus off of and will run reports to verify setups. The Menu Maintenance record will be manipulated to remove folders from the BOLO Navigation panel, and to change application rights to read only.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives • Identify the importance of the fields on BOLO user profile• Create a template user• Understand the difference between referencing and copying a profile• Manipulate the BOLO Navigation Panel to remove access to folders• Create Read only rights to a data application• Verify user profile rights using reports and advanced searches
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 32
BOLO
P2 Products Course Catalog
Name and Address
Module: Core
The Name and Address file is very important to BOLO Processing. In this session participants will learn how to properly set up records for COM1201, AP1210, AR1210, and RV1210 for processing. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Create NAME records, including VENDOR, CUSTOMER, and RV.OWNER• Creating site records• Copy existing records• Perform mass updates• Understand and assign usage codes• Process the Name and Address Information Report
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 33
BOLO
P2 Products Course Catalog
Ownership Changes for Land and Accounting
Module: Land and Accounting
This session will review types of ownership changes and the appropriate process to use within the system. We will also explain the difference between with recourse and without recourse and how this decision effects processing.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Perform successfully an Ownership change authorization• Understand the Mass land deck and ownership change process and properly run them• Generate a JIB deck and mass division order change• Generate a Revenue deck and mass division order change• Perform a reallocation of owner sales from assignments
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 2 hours............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 34
Reporting Hierarchies/Drill Down
Module Reporting
This course is designed to introduce end users to the power of Hierarchies and Drill Down reports in the BOLO Software.
This webinar is available by Custom schedule only.
Objectives
• Demonstrate the use of a predefined hierarchy in the Drill Down applications, FinancialReport templates, and Spreadsheet Interface to understand the power of implementing ahierarchy
• Review the set ups and requirements to implement a hierarchy in GL1212• Post the hierarchy processes to build cost center relationships and post transactions for
reporting purposes• Review best practices to ensure hierarchies maintain linearity and financial reports are
updated properly with the most recent transactions
Class Level: Advanced .............................................................................. Pre Req: Cost Centers
Class Length: 1 hour ................................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 35
BOLO
P2 Products Course Catalog
Spreadsheet Interface (SSI) Introduction
Module: Reporting
Spreadsheet interface uses an Excel spreadsheet to pull BOLO data. The Excel formulas pull data from the Bolo database, providing you real time access to information as data changes. In this session, we will cover the using the function wizards to dynamically pull data from the Bolo into a spreadsheet and generate an LOS. This class may be scheduled as classroom or webinar training.
The fee for this session is per connection (1-4 participants). Online training sessions are self- registering through the P2TrainingCenter.webex.com website. To obtain a password, or for any questions, please email P2Training@p2energysolutions.com. After you register, you will receive an invitation on how to join the session and a training manual PDF within 48 hours of the class. To cancel registration, email P2Training@p2energysolutions.com 48 hours or more prior to the webinar start time, to avoid being billed for the webinar.
Objectives
• Have conceptual understanding of how the BOLO Spreadsheet interface tool is integratedinto, and works with, Microsoft Excel
• Have conceptual understanding of how the SSI function SZTTCREAD works• Have conceptual understanding of how the SSI function DGLINFOworks• Have conceptual understanding of how the SSI function VARBRPC works• Understand what type of data is suitable for SSI reports (versus Query or FRB)• Be able to review a functional SSI workbook and understand how the formulas work (afirst
step towards building SSI reports from scratch
Class Level: Intermediate ............................................................................. Pre Req: Beg Query
Class Length: 1 hour ................................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 36
Classroom Instruction – Course Descriptions
Each class includes a training guide and may be scheduled at the P2 Houston or Denver training facilities, or at client offices. These classes may also be customized to your needs.
Accounts Payable (AP)
Module: Core Accounting
The AP course is designed to introduce clients to the AP module in the BOLO Software. Participants will enter invoices, review set ups, and generate accounting distributions.
Objectives
• Understand the AP set up screens and their implication on the AP process• Generate invoices using registry program, data entry, invoice templates, and import process• Reverse an incorrect AP invoice• Run and review AP canned reports to assist in processing• Understand and implement AP profiles and approvals to affect the workflow of approving
vouchers
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 37
Accounts Receivable
Module: Accounts Receivable
This course will cover system setups, entering manual accounts receivable invoices, cash calls and reports. You will review the best reports to assist you in analyzing your open receivables and how to make adjustments to manual invoices and cash calls.
Objectives
• Understand and utilize AR System setups and defaults that effect processing and internalprocedures
• Create a new customer in the AR1210 application• Be able to generate an AR Invoice• Perform a cash call invoice• Print manual invoices• Understand and utilize Aging and sub-ledger reports• Perform adjustments to manual invoices and cash calls
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: Half Day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 38
Advanced Query
Module: Reporting
In this session, we will be discussing querying multi valued attributes, building dictionary items, and formatting. A review of basic query is included in the session.
Objectives
• Manipulate queries to properly identify and pull information from multi-valued attributes• Utilize advanced formatting commands to customize query output• Work with advanced verbs to save lists, and generate merge lists from multipleSELECT
statements• Utilize the EVAL and TRANS modifier to create dictionary items that perform simple IF THEN
statements and pull information from tables that share a Key value
Class Level: Advanced ........................................................................ Pre Req: Beginning Query
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 39
AFE Introduction
Module: Capital Budgeting
The Capital Budgeting System tracks how your company tracks and reports Authorization for Expenditure (AFE) information. In this class we will look at the maintenance setup and reporting of AFEs. This class may be scheduled at a client’s office as part of onsite training.
Objectives • Benefits of AFEs• AFE profiles• Control coding• AFE reports
Class Level: Basic ...................................................................................... Pre Req: Cost Centers
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 40
Beginning Query
Module: Reporting
Ad hoc reporting is a requirement for many of our clients that need a report to look a certain way with specific data. In this course participants will create ad hoc reports using the advanced search functionality and the Query Command Builder. The focus of this course is to provide participants with a good foundation in being able to write their own query statements. The Beg query class is also offered in a two part online series which allows your group to the class from your office with up to five people attending.
Objectives • Perform an ad hoc report using advanced search• Perform the steps to create new query sets for organization and location of existing queries• Access query command builder to select dictionary items from the appropriate tables• Utilize the SAMPLE command to view output from dictionary items• Construct query statements using the query commands SELECT, LIST, COUNT, and SORT
Class Level: Intermediate .................................. Pre Req: UI Navigation, Name Address Master
Class Length: Full day ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 41
Cash Disbursements
Module: Cash Disbursements
This class covers the functionality of the Bolo Cash Disbursement module, including system setup, AP check processing, manual AP check processing, voiding AP check processing, bank reconciliations and standard reports.
Objectives
• Basic understanding of the Cash Disbursement system setup • How to run AP Check processing programs • How to run AP Manual Check processing programs • How to void AP check processing • Bank Reconciliations and the CD module programs involved • How to run standard Cash Disbursement reports
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 42
Cash Receipts
Module: Core Accounting
This course provides an overview of the BOLO Cash Receipts module, cash receipts entry and processing, application of deposits, CR standard reports, and CR processing (recording and applying deposits).
Objectives
• Basic understanding of the BOLO Cash Receipts module• How to enter and process cash receipts using CR1301• How to apply cash receipts• The CR standard reports and how to run them• How to record and apply deposits
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 43
CDEX
Module: Revenue
BOLO provides a separately licensed tool to automate the receipt and distribution of Revenue Check Detail. The CDEX module allows users to review the check prior to creating a batch, prevent duplicate check input, create revenue vouchers, and create CDEX files to send check data to owners/payees.
Objectives
• CDEX setup screens• Set up company to receive and send CDEX files• Receive and process a CDEX file• Process and send a CDEX file• Run CDEX reports
Class Level: Intermediate ................................................................................ Pre Req: Revenue
Class Length: 2 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 44
Asset Tracking and DD&A Processing
Module: Asset Tracking
The Asset Tracking (AT) module is a separately licensed module that allows users to manage fixed assets for both their oil and gas properties and furniture and fixtures. The AT module is fully integrated with the Accounts Payable and General Ledger modules within the BOLO software package. The Depreciation, Depletion and Amortization (DD&A) portion of the Asset Tracking module allows users to automate accounting entries and support straight line, SYD, declining balance, SCRS, MACRS and UOP depletion of methods. This course give users a broader understanding about which applications are used to perform the business functions supported by the AT module, along with various application-specific tips and recommendations to make AT users more self-sufficient.
This course is offered by custom-schedule only, at customer request, as classroom or webinar training. For full comprehension of the course material, we recommend that it be taken immediately following the actual BOLO Asset Tracking implementation, with student involvement during implementation providing a foundation for the formal training. This class is recommended for the Accounting Personnel responsible for calculating and posting periodic DD&A entries to the General Ledger (including supervisors and managers). Course length may vary dependent on client-specific situations. Typically the Classic Asset DD&A portion requires 8 hours and the Oil and Gas Asset DD&A portion requires 8 hours. Either part can be implemented stand-alone or both may be implemented, in which case the estimated training length is 16 hours.
Objectives
• System-level Setup and Configuration Overview• Classic Assets including Preliminary Configuration, Creating Classic Assets, Classic Asset
Business Functions Supported, Standard AT Reports, and Custom AT Queries• Oil and Gas Assets including Preliminary Configuration, OG Business Functions
Supported, Standard AT Reports, and Custom AT Queries
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 1 to 2 days (varies) ............ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 45
Division Orders
Module: Land
This course will review the various types of division of interests that can be built in the system: land, master, revenue, and JIB. Participants will build each type of DOI, understand how to make changes, and run reports using each type.
Objectives
• Set up new Division of Interest utilizing all 4 categories: land, master, JIB, and revenue• Understand the use and set up of Burden based revenue decks in the BOLO software• Be able to perform a change in DOI type• Run and review reports to find all DOI's owners and cost centers
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Half day ............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 46
DOI and Ownership Changes
Module: Land
This course will review the various types of division of interests that can be built in the system: Master, Revenue, and JIB. Participants will build each type of DOI, understand how to make Manual and Mass Ownership Changes, and run reports using each type.
Objectives
• Set up new Division of Interest for types: Master, Revenue, and JIB• Build each type of DOI• Understand how to make Manual and Mass Ownership changes• Run and review reports for each type of DOI
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Full day ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 47
Fast Track
Module: Core
The four-day Fast Track course is designed to introduce new users to the BOLO software. An overview of the modules and how they interact with each other is reviewed. Participants get hands on access to a demo data area as they explore the BOLO software. The Fast Track class can be held at our site or yours with your data or ours. It can also be taught remotely, especially for BOLO ASP clients. Please contact your Account Manager or training to schedule this course. The cost of the course is dependent on the number of people and data area used during the training.
Objectives
• Create and modify existing records utilizing standard BOLOfunctions• Locate applications by nomenclature, keywords, and menustructure• Create Name and Address records for proper processing the AP, RV, and AR modules• An understanding of General coding controls and how to implement to ensure processing
errors do not occur when coding to specific accounts and sub accounts ( chart ofaccounts)• Set up and maintenance of the voucher Approval process to maintain SOX controls• Procedures for cost centers set ups to ensure proper allocations and reporting• An introduction to the AFE set up, processing, and reporting• Maintain Billing decks and Revenue decks• Demonstrate an understanding AP data entry including invoice processing, reporting, and
approval• An overview of Cash Disbursement module setup, processing, and reporting• Generate Manual AR invoices in the BOLO Software applications• An overview of Cash Receipts module setup, processing, and reporting• An overview of the General Ledger module setup, processing, and reporting
Class Level: Intermediate ..................................................................................... Pre Req: None
Class Length: 4 – 4.5 days ........................ Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 48
Financial Report Builder
Module: Reporting
This course is designed to introduce clients to the BOLO Financial Report Builder. The Financial Report Builder is used to generate lease operating statements, AFE comparisons, cost center actual to budget comparisons, property ledger trail balances, and property ledgers.
Objectives
• Understand the setup of GL1280E - The Financial Report Template builder application byexamining the INC.1 template.
• Utilize the BOLO copy function to tweak delivered templates utilizing client definedaccountgroups and calculations.
• Manipulate headings and captions to meet reporting needs• Manipulate rows and columns to change look and feel of report• Utilize the R1 and C1 dynamic variables to create complex calculations
Class Level: Advanced ........................................................................ Pre Req: Advanced Query
Class Length: 3 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 49
General Ledger
Module: Core Accounting
This class provides an overview of the Bolo General Ledger module. It covers General Ledger (GL) Setup, data entry, processes (GL2350 and GL2315) and reports. This class may be custom scheduled as classroom or webinar training.
Objectives
• Purpose and functions of the GL module• General Ledger setup and programs required• GL Data Entry programs and their purpose• Standard GL reports and how to access them• How to run GL Processes: P&L Close process and Automated Account Analysis process
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 3 hours............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 50
GL Coding Controls and Approvals
Module: Core Accounting
General Ledger (GL) Coding Controls and Approvals is geared towards accounting staff and deals with controls as they pertain to the general ledger, accounting period, and chart of accounts. We cover approval setup, approval processing and posting options. This class may be custom scheduled as classroom or webinar training.
Objectives
• Coding requirements• Data entry• Required information• Coding restrictions• Approval Setup• Approval Processing• Posting Options
Class Level: Intermediate ........................................................... Pre Req: Accounting Overview
Class Length: 2 hours............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 51
JIB Setup and Processing
Module: Core Accounting
Joint Interest Billing (JIB) Setup and Processing walks you through all the setups required to process your joint interest bills. You will learn ways to make your processing more efficient by creating automated overhead entries, using cost center allocations and how to easily rebook your joint interest bills when an ownership change has occurred. This course will walk you all the way through printing your joint interest invoices.
Objectives
• Understand the Company setup screen and its effect on JIB processing• Map 8/8ths accounts to net cutback accounts• Set cost centers up to generate automatic overhead entries• Reallocate costs that had been billed to an incorrect owner• Change deck and session selection• Correct transaction descriptions prior to printing invoices• Cancel transactions so they do not appear on invoices (in and out transactions)• Cost center allocation matrices and process allocations• Reconcile JIB allocations with your GL• Process and print JIB statements• JIB accounting transaction process
Class Level: Intermediate .............................................................. Pre Req: BOLO UI Navigation
Class Length: 2 full days........................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 52
Land Overview
Module: Land
This 2 ½ day interactive course is designed to introduce users to the BOLO Land Module. The focus of this course is to introduce new users to the BOLO Land system and reporting capabilities. Please contact P2Training@p2energysolutions.com for additional information.
Objectives • System Bolo Overview and the Core pieces of software• Effectively navigate the system to improve efficiencies and understanding of theBOLO
software application• Review the Name and Address set up screens and their effects on the Land system• Set up a new lease and perform searches on existing leasesutilizing advanced searches and
canned lease reports• Perform Lease Maintenance on existing records in the BOLO software• Create a well in the PRD1210 application• Understand the use and set up of Land Contracts as it pertains to the Lease module• Run and review canned land reports• Perform a Land Mass change utilizing the LD2205 application for WELL.INFO and LEASE
records• Name and Address Review• Lease Setups and Searches• Lease Maintenance• Well Setups• Land Contracts• Land Reporting• Advanced Searches• Land Mass Changes
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: 2 ½ days ............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 53
Land Query
Module: Land
This all-day Land Query course is designed to assist end users in learning how to query the attributes and files specific to the Land Model. Participants are required to complete the Beginning Query Class before attending. However, if they have not, a review of Advanced Searches and the Query Model will be done during this class.
Objectives • Review the Query Command Line Interface: Creating Query Sets and Comments in
Query - Stacks• Introduction to the Query Development Model and Locating Dictionary Items and File
Names• Exporting to View, To Excel and to the HOLD file• Review the Advanced Search functionally• Review the function of LIST, SELECT, and SORT from the Beg Query class• Review locating attributes and files specific to the Land Module• Review sample Land attributes and understand their function and use in Land adhoc
queries• Creating a bridge between the LEASE and TRACT file utilizing BSELECT• Review sample Land queries
Class Level: Intermediate ............................................................................. Pre Req: Beg Query
Class Length: Full day ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 54
Landman 101 Training
Module: Land
Landmen are often reluctant to navigate in a land system because they are unsure of what is available, how to find what they are looking for, and how to retrieve the information available to them. Consequently, Landmen often depend on land administration staff to run reports, create system-generated exhibits and perform analysis of land data. Since there are times when quickly retrieving data is necessary and no one is available to help, it is important for Landmen to have a basic working knowledge of the BOLO Land System. This class will introduce Landman to the land data being captured in BOLO, teach them how to perform quick lookups and inquiries of land information, and how to run and read land reports. This class will also teach Landmen how to capture and report contract data in BOLO.
Objectives • Land System set up High-level Overview• Performing Lease inquiries and utilize Advanced Searches to locate lease• Utilize canned land reports for analysis• Understand the contract screen and run canned reports to understand therelationship
between the contract and Lease
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Full day ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 55
Revenue Accruals
Module: Revenue
This course will review the revenue process and will focus on the revenue accrual process. This class may be scheduled at a client’s office as part of onsite training.
Objectives
• Set up the Revenue system set up screens and understand their impact on processing • Understand the accrual methods and impact on reporting and processing • Generate a relative price index • Load accrued oil and gas entries using data entry screens and
Class Level: Intermediate .......................................................... Pre Req: Revenue Adjustments
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 56
Revenue Adjustments
Module: Revenue
The BOLO System offers many opportunities and ways to create and process Revenue Adjustments. These include adjustments based on user-defined assignments, pay code changes, reversals and rebooks, and adjustments at the owner level. Some of the methods we will discuss can be used to adjust division orders and owners in the Joint Interest Billing System and Land System. This class may be scheduled at a client’s office as part of onsite training.
Objectives • Generate new Ownership change requests in the BOLO software• Apply Ownership Change Authorizations to Revenue Division Orders and Unpaid Owner Sale
Items• Modify Pay Codes on Owner Sale records• Create and upload individual Owner Sale records• Reverse and Rebook Revenue Sales
Class Level: Intermediate .............................................................. Pre Req: Revenue Processing
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 57
Revenue Processing
Module: Revenue
This course is designed to introduce clients to the Revenue process in the BOLO software and assist them in making the business process decisions required to set up the revenue system. Participants will learn how to process and review current months revenue. This class may be scheduled at a client’s office as part of onsite training.
Objectives
• Enter gross sales into the BOLO software utilizing the data entry screen and uploadmethod• Review prior month's adjustments due to price or volume corrections• Reconcile revenue processed to sub-ledgers and general ledger• Process revenue checks
Class Level: Intermediate .................................................................... Pre Req: Revenue Setups
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 58
Revenue Setups
Module: Revenue
Set up of the BOLO Revenue System requires some time and consideration. There are a variety of options that make the system flexible to all calculation, owner sharing and purchaser receivable needs. The time spent setting up the system correctly for your needs will reduce the time spent in revenue entry each month. This will explain considerations to take when completing your set up to make the system work most efficiently for you. This class may be scheduled at a client’s office as part of onsite training.
Objectives
• Understand Revenue set up screens and properly maintain for the revenue process • Set up and understanding of the Balancing Owner in the BOLO software • Create and maintain Minimum Suspense Codes • Effectively utilize Sale Types • Enter Tolerance Amounts based on company requirements • Maintain and utilize Transaction Types • A review of Component set up and use in the BOLO software
Class Level: Basic ........................................................................... Pre Req: BOLO UI Navigation
Class Length: Half day .............................. Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
BOLO
P2 Products Course Catalog
P2 Energy Solutions | Confidential © 2020 P2 Energy Solutions
Updated 8/26/2020 Page 59
Spreadsheet Interface
Module: Reporting
This course introduces the BOLO Spreadsheet Interface (SSI) tool, which allows BOLO users to build Excel-based reports that retrieve data in real time from the native BOLO database. This course gives participants a conceptual understanding of the SSI tool, introduces the individual SSI functions, and demonstrates a few operational SSI reports to give participants an appreciation for the power and potential uses of the SSI tool.
Objectives • Gain conceptual understanding of how the BOLO Spreadsheet interface tool isintegrated
into, and works with, Microsoft Excel• Gain conceptual understanding of how the SSI function SZTTCREAD works• Gain conceptual understanding of how the SSI function DGLINFOworks• Gain conceptual understanding of how the SSI function VARBRPC works• Understand what type of data is suitable for SSI reports (versus Query or FRB)• Review several functional SSI workbooks and understand how the formulas work (a first
step towards building SSI reports from scratch)
Class Level: Intermediate ............................................................................. Pre Req: Beg Query
Class Length: 3 hours ............................... Field of Study: Computer Software and Applications
Advanced Preparation: No required Advanced Preparation
Recommended