View
0
Download
0
Category
Preview:
Citation preview
Boiling waterChilled waterHot waterFiltration
2012
2 3
Introduction
Every working day in the UK over eight million cups of tea or coffee aremade using Zip instant boiling water products. The launch of Hydroboilinto the UK market in the late 80s revolutionised boiling water deliveryin the workplace and brought new levels of efficiency, safety and usersatisfaction to commerce, industry and the public sector. Today in-stant boiling water is firmly established as the workplace norm withZip the clear market leader.
More recently Zip HydroTap systems have brought further innovationto the market with under counter units providing instant delivery of fil-tered boiling and chilled water through easily accessible countermounted taps.
Zip also offers a comprehensive range of top quality, value for moneycommercial electric water heating products - both vented and un-vented - from 5 to 300 litre capacity. This is supported by a range ofinstantaneous water heaters and a wide selection of water chillers.
The Zip range is in daily use in tens of thousands of locations through-out the UK including the Houses of Parliament, numerous Blue ChipCompanies, Hospitals, Schools, Military Establishments and HM Pris-ons as well as many homes.
All products are available nationally through electrical wholesalers andplumbing merchants.
Zip’s experienced team of Training Managers offer bespoke producttraining geared to the needs of Installers, Specifiers and Facility Man-agers. These ‘hands on’ sessions typically take place on site and coverall relevant product installation, servicing and maintenance issues. Inaddition a choice of RIBA accredited CPD programmes is available.
Zip products are inherently reliable and covered by comprehensive onsite parts and labour warranties – details of which may be found at:
www.zipheaters.co.uk/warranty
To support these guarantees and provide comprehensive service sup-port packages ranging from out of warranty repair to comprehensivemaintenance programmes, Zip has the largest team of directly em-ployed Engineers in the UK focused solely on boiling water, chilledwater and commercial water heating products.
Zip is committed to Customer Satisfaction and offers support and ad-vice to Specifiers, Installers and End Users alike. Whether the query re-lates to the specification, installation or use of our products, the ZipTechnical Advice Team is just a phone call away.
Whatever the boiling, chilled or hot water need, Zip has the ultimatesolution.
Index
NEW PRODUCTS 6-7
Drinking Water - Boiling
HydroTap introduction 8-13Boiling & chilled 14-15Boiling 16-17Chilled 18-193-in-1 & 4-in-1 20-21All-in-One 22-23Industrial 24-25HydroTap for the Home 26-29HydroTap options and filtration 30-33Wall Mounted instant boiling water overview 34-35Hydroboil Plus 36-37Hydroboil 38-39Econoboil 40-41Duo 42-43Accessories 44-45
Drinking water - Chilled
Chilled water introduction 46-47HydroTap chilled 48-49Chilltap 50-51Chillmaster 52-53Wall Fountain 54-55Chill Fountain 56-57Chilled and filtered water for the Home 58-61Accessories 62-63
Hot water
Hot water introduction 64-65InLine introduction 66-67ES & Kits 68-71ILX 72-73CEX 74-75DEX & DBX 76-77InLine accessories 78-79Aquapoint III unvented 5-15 litres 80-81Varipoint II unvented 10 & 15 litres 82-83Unvented accessories 84-85Aquapoint III unvented 30-100 litres 86-87Varipoint III unvented 30-100 litres 88-91AquaFlo 92-93Tudor 94-95Contract 96-97RCH 98-99Applications & General Data 100-101
4 5
Zip Hydroboil PlusIn response to customer de-
mand the existing rangeof Hydroboil Plus capacities
is extended to include 10, 15,25 and 40 litre units, making
them the most energy efficientin the industry.
See pages 36-37
Zip HydroTap FinishesIn addition to the standard Bright Chrome finish traditional HydroTap isnow available in a choice of Brushed Chrome, Black Chrome andGold Plated finishes. See page 30
Zip HydroTap MiniboilSuper-compact, economy
models for filtered boiling andfiltered cold (ambient) water.
See pages 28-29
Zip New Products
6 7
Zip HydroTap IndustrialModels are designed to withstandthe heavy usage associated withshop floor, canteen and institutionalenvironments.See pages 24-25
Zip HydroTap All-in-OneSystems deliver instant boiling
and chilled filtered drinking waterand hot, warm or cold water
through one stylish tap.See pages 22-23
Zip HydroTap+Models feature increased cupsper hour boiling water capacityand a ‘free-flow’ chilled watercapability.See pages 15, 21, 23 & 25
Classic tap Elite tap
Zip DEX, DBX & CEXNew ranges of high efficiency electronically controlledinstantaneous electric water heaters for single or multiple outlets.See pages 74-77
Zip Chilltap ExtraChilled filtered water, instantly,plus filtered cold (ambient) water.Fingertip control for filling cupsand hands-free filling for large jugs.Superior submicron filtration.See pages 60-61
Drinkingwater
8
Zip HydroTap brings, with one system, all the practical advantages ofinstant boiling and chilled filtered water to commercial environmentssuch as offices, factories and hospitals, as well as in the home.
Zip HydroTap®
Changing the way the world boils water
Press lever down to fillcups, teapots, etc.
When activated the safetyinterlock requires finger-thumb operation
Pull lever forward to fill largevessels and for measured
delivery
Instant boiling and chilledfiltered water from a singletap.
A touch of the red lever providesinstant filtered boiling water,whilst the blue lever deliversfresh tasting filtered chilledwater.
Features and benefits
Programmable energy savingmodes for added efficiency.
Programmable maximummeasured water delivery.
Safety interlock provides userwith added protection whereneeded.
System unit hidden under thecounter.
Filter change warning light.
No more time wasted waiting fora kettle to boil.
No more energy wasted boilingkettles or urns.
No more bottled water to buy.
No more bottled water to store.
No more bottled water tohandle.
No more running out of drinkingwater during periods of highdemand, such as hot weather.
Features the most technicallyadvanced submicron filtrationsystem for healthier, bettertasting drinking water.
Option of anti-scale filter.
Installation at the sink or onoptional font and drain.
Drinkingwater
9
Drinkingwater
10Drinkingwater
11
Zip HydroTap® technologySuperior technology saves energy andconserves water
Zip HydroTap® efficiencyTypical energy efficiency information—commercial models
Power-Pulse™ energy saving technology
Reduces power consumption by allowing the system toregulate its power during periods of high and low usage.This saves energy whilst maintaining the tightestpossible temperature control.
Cuts energy consumption
Running costs: no more than 15p per day (with sleepmode active 10 hours in 24), plus boiling water 8 cupsfor 1p; chilled water 20 glasses for 1p.
Sleeps when inactive
The system can be pre-set to power down after 2 hoursof non-use, but will still retain stored ‘boiling’ water at anenergy saving 65°C. The system quickly recovers to thepre-set boiling temperature upon further draw-off.
Programmable 24/7 timer
Pre-set the ‘power on’ and ‘power off’ times (once aday) for those periods when the Zip HydroTap will not beused, such as overnight or at weekends (for commercialusers).
N.B. To calculate a total running cost figure, add the cost per dayto the number of cups of boiling water consumed, multiplied by thecost (at 8 cups for 1p) and the number of glasses of chilled waterconsumed, multiplied by the cost (at 20 glasses for 1p).
Methodology:
• Typical results of test carried out for Zip and independentlyverified by The University of New South Wales, Australia
• Assumed typical business day; 12 hours operational mode, 12hours sleep mode, 10 minutes full recovery mode
• Operational mode is the default setting; with the main systemusing sufficient power to maintain set temperature in the tanks
• Sleep mode—system powers down if not used for two hours,using only enough energy to maintain ‘boiling’ water at 66°C
• Test conditions—boiling water at 98°C and chilled water atbetween 5°C and 10°C
• The CO2 emission estimates are based on 430 kg of CO2 per1000 kWh of electrical power consumed
• The estimated cost per day is based on £0.10 per kWh
Standard cup 167ml. Standard glass 200ml.
Typical 24-Hour Business Day
Model Power Usage CO2 Emission Cost per day(Watt hours) (kg) (£)
BC150/175 1,481 0.637 0.15
BC100/125 1,357 0.584 0.13
For each cup of boiling water or glass of chilled water
Model Power Usage CO2 Emission Cost(Watt hours) (kg) (£)
Boiling cups 13.0 0.006 0.0013
Chilled glasses 6.0 0.003 0.0006
Plus
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Drinkingwater
12Drinkingwater
13
Zip HydroTap® rangeGeneral Information—CommercialHydroTap
Zip HydroTap® rangeThe wide range of products available
Tap headChrome plated, die cast tapbody with push and pull levers.Intergral safety lock and LEDindicators.
Disabled optionOversize tap levers.
Control panelLocated on undercounter unit forprogramming sleep mode, timer,water temperature and waterdelivery.
Filtration systemIntegral triple-action submicronencapsulated cartridge.(See page 33)
Safety featuresSafety interlock on tap.Undercounter safe tray with leakdetector.
FinishesAvailable in Bright Chrome(standard), Brushed Chrome,Black Chrome and Gold Plated.
ApprovalsWRAS, CE endorsed.
Warranty1 year on site parts and labour.For full details visit:www.zipheaters.co.uk/warranty
PlumbingThe water supply must bepotable (drinkable).
If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted.
An isolating valve should beinstalled between the watersupply and the unit.
VentingThe cupboard housing the unitmust be amply ventilated byusing the 4mm buffers and ventprovided.
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amp.
Installation must comply withcurrent IEE regulations.
3 metre power cable provided.
CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip FL3000 scalemanagement system (see page33).
Boiling & chilled
Chilled only
For the Home
Boiling only
4-in-1 & 3-in-1
All-in-One Industrial
HydroTap sink mountedAllow 35mm hole forfixing to surface or sink
HydroTap font mountedAllow 35mm hole for tap and
108mm for font(template supplied)
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Drinkingwater
DrinkingwaterZip HydroTap®
Filtered boiling and chilled water
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Features & benefits• Provides boiling and chilledfiltered water instantly from asingle tap
• Saves time with staff waitingfor a kettle to boil
• No unsightly and unsafe kettleleads
• More environmentally friendlythan a kettle
• Provides more choice ofbeverage than a vendingmachine
• No need for expensive andenvironmentally damagingbottled water
• No need to store and handlebottled water
• No fear of running out ofdrinking water in extremeweather conditions
• Can be sited at a sink oraway from it on the optionalfont and drain
Choice optionsFor medium sized locationschoose BC160/125+.
For large locations chooseBC200/175+.
‘+’ signifies models are ‘freeflow’,ensuring cold water continues toflow when ‘chilled glasses perhour’ is exceeded during periodsof high demand.
Boiling systemOpen outlet, vented; designed tooperate at 98°C.
Chilling systemFan-cooled condenser type.
RefrigerantR134A.
Temperature settingsThe boiling temperature can beadjusted from 99°C to 68°C.
N.B. For general installation andspecification details of theHydroTap range see page 12.
14 15
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
BC200/175+ 200 175 2.8 500 x 465 x 395BC160/125+ 160 125 2.3 440 x 430 x 337
‘+’ signifies models are free flow, ensuring cold filtered water continues when ‘chilledglasses/hour’ is exceeded during periods of high demand.
Standard cup 167ml. Standard glass 200ml.
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer enables the boiling and chilled waterunits to switch off automatically during known periods of inactivitye.g. overnight or weekends, but return to full functionality ahead ofthe next expected demand.
• Inactivity Sleep Mode enables the boiling water unit to power downor switch off after 2 hours non-use. Powering down allows the watertemperature to gradually reduce to 65˚C, at which it is maintained.Upon further draw off boiling resumes.
Drinkingwater
Drinkingwater
16 17
Zip HydroTap®
Filtered boiling water
Features and benefits• Provides boiling filtered waterinstantly
• Saves time with staff waitingfor a kettle to boil
• No unsightly and unsafe kettleleads
• More environmentally friendlythan a kettle
• Provides more choice ofbeverage than a vendingmachine
• Can be sited at a sink or awayfrom it on the optional font and
drain
Choice optionsFor small and medium sizedlocations choose B160F.
For large locations choose B200F.
Boiling systemOpen outlet, vented; designed tooperate at 98°C.
Temperature settingsThe boiling water temperature canbe adjusted from 99°C to 68°C.
N.B. For general installation andspecification details of theHydroTap range see page 12.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
B200F 150 – 2.6 310 x 340 x 393B160F 100 – 2.1 280 x 323 x 337
Standard cup 167ml.
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer enables the boiling and chilled waterunits to switch off automatically during known periods of inactivitye.g. overnight or weekends, but return to full functionality ahead ofthe next expected demand.
• Inactivity Sleep Mode enables the boiling water unit to power downor switch off after 2 hours non-use. Powering down allows the watertemperature to gradually reduce to 65˚C, at which it is maintained.Upon further draw off boiling resumes.
Drinkingwater
18Drinkingwater
19
Zip HydroTap®
Filtered chilled water
Features and benefits• Provides chilled filtered waterinstantly
• No need for expensive andenvironmentally damagingbottled water
• No need to store and handlebottled water
• No fear of running out ofdrinking water in extremeweather conditions
• Can be sited at a sink or awayfrom it on the optional fontand drain
Choice optionsFor small to medium sizedlocations choose C125.
Chilling systemFan-cooled condenser type.
RefrigerantR134A.
Temperature settingsThe chilled water temperature isfactory set to deliver water at be-tween 5°C to 10°C.
N.B. For general installation andspecification details of theHydroTap range see page 12.
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
C125 – 125 0.2 306 x 457 x 334
Standard glass 200ml.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Energy ConservationProgrammable operation
• Integral 24 hour 7 day timer enables the chilled water unit to switchoff automatically during known periods of inactivity e.g. overnight orweekends, but return to full functionality ahead of the next expecteddemand.
Drinkingwater
Drinkingwater
20 21
Features & benefitsOffers all of the advantages of astandard HydroTap plus these ad-ditional 4 benefits.
• Provides hot water at 50°Cto the mixer tap (supplied)and either boiling and chilled(4-in-1) or boiling (3-in-1) tothe HydroTap
• Saves the cost of a separatehot water supply
• Saves space
• Conserves energy
Choice options3-in-1For small to medium sized locationschoose BH160F.
For large locations choose BH200F.
4-in-1For small to medium sized locationschoose BCH160/125+.
For large locations chooseBCH200/175+.
‘+’ signifies models are ‘freeflow’,ensuring cold water continues toflow when ‘chilled glasses perhour’ is exceeded during periodsof high demand.
Boiling systemOpen outlet, vented; designedto operate at 98°C.
Chilling systemFan-cooled condenser type.
RefrigerantR134A.
Temperature settingsThe boiling water temperature canbe adjusted from 99°C to 68°C.
Mixer FlowThe mixer tap will deliver up to3ltr/min, ideal for rinsing cups andhandwashing.
N.B. For general installation andspecification details of theHydroTap range see page 12.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Zip HydroTap® 3-in-1 & 4-in-1Boiling and chilled filtered drinking waterPLUS hot, cold (ambient) or mixedwarm water – all from a single source
4-in-1 provides filtered boiling and chilled water delivered throughthe HydroTap PLUS hot and cold (ambient) through the mixer tap.
3-in-1 provides filtered boiling water delivered through the Hydro-Tap PLUS hot and cold (ambient) through the mixer tap.
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer enables the boiling and chilled waterunits to switch off automatically during known periods of inactivitye.g. overnight or weekends, but return to full functionality ahead ofthe next expected demand.
• Inactivity Sleep Mode enables the boiling water unit to power downor switch off after 2 hours non-use. Powering down allows the watertemperature to gradually reduce to 65˚C, at which it is maintained.Upon further draw off boiling resumes.
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
BH200F 200 - 2.6 310 x 340 x 393BH160F 160 - 2.1 280 x 323 x 337BCH200/175+ 200 175 2.8 500 x 465 x 395BCH160/125+ 160 125 2.3 440 x 430 x 337‘+’ signifies models are free flow, ensuring cold filtered water continues when ‘chilledglasses/hour’ is exceeded during periods of high demand.
Standard cup 167ml. Standard glass 200ml.
Drinkingwater
22Drinkingwater
23
Zip HydroTap® All-in-One(Commercial) NEWBoiling and chilled filtered drinking waterPLUS hot, cold (ambient) or mixedwarm water – all from one tapFeatures & benefitsOffers all of the advantages of astandard HydroTap plus theadditional benefits.
• Replaces mixer taps todeclutter and simplify kitchendesign
• Vented systems save space,cost and energy by eliminatingthe need for a separate hotwater supply
• Separate drinking watercontrols for convenience andsafety
• Vented and non-ventedsystems available
Choice options
Non-vented systems(Uses an existing hot watersupply to feed mixed hot waterto the All-in-One Tap).
For small to medium locationschoose BC160/125+A.
For large locations chooseBC200/175+A.
Vented systems(Uses incoming cold watersupply heated in the HydroTapsystem to provide mixed hotwater to the All-in-One Tap).The hot water system mixesboiling and cold water toapproximately 50°C.
For small to medium sizedlocations chooseBC160/125+AV.
For large locations chooseBC200/175+AV.
‘+’ signifies models are‘freeflow’, ensuring cold watercontinues to flow when ‘chilledglasses per hour’ is exceededduring periods of high demand.
Tap headLong reach spout swings toservice two sinks.
N.B. For general installation andspecification details of theHydroTap range see page 12.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
BC200/175+AV 200 175 2.8 500 x 465 x 395BC160/125+AV 160 125 2.3 440 x 430 x 337BC200/175+A 200 175 2.8 500 x 465 x 395BC160/125+A 160 125 2.3 440 x 430 x 337
‘+’ signifies models are free flow, ensuring cold filtered water continues when ‘chilledglasses/hour’ is exceeded during periods of high demand.
‘A’ signifies non-vented models where the system uses an existing hot water feed themixed hot water to All-in-One tap.
‘AV’ signifies vented models where the system uses incoming cold water and heats itusing the HydroTap boiling process to provide mixed hot water to the All-in-One tap.
Standard cup 167ml. Standard glass 200ml.
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer enables the boiling and chilled waterunits to switch off automatically during known periods of inactivitye.g. overnight or weekends, but return to full functionality ahead ofthe next expected demand.
• Inactivity Sleep Mode enables the boiling water unit to power downor switch off after 2 hours non-use. Powering down allows the watertemperature to gradually reduce to 65˚C, at which it is maintained.Upon further draw off boiling resumes.
Drinkingwater
Drinkingwater
24 25
Zip HydroTap® in Industry NEWHeavy duty designs for industrialenvironments and institutions
Features & benefitsOffers all of the advantages of astandard HydroTap plus theseadditional benefits.
• Super strong tapered shankanchor (side touch models)
• Damage-resistant side or toptouch buttons
• Simple 2-button without safetylock
• Optional 3-button with safetylock
• Can be installed R/H or L/H
• Up to 200 boiling cups perhour
• Up to 175 chilled glasses perhour
• Features ‘Free-Flow’, ensuringcold filtered water continuesto be available even when‘chilled glasses per hour’capacity is exceeded
• Side touch variant (primarilyfor institutional use) has a highstrength tapered base whichfastens to an undersink clamp
block with a reinforcing spine
Choice options
Top-Touch modelsFor heavy duty small to mediumsized locations chooseBC160/125+IT.
For heavy duty large locationschoose BC200/175+IT.
Side-Touch modelsFor heavy duty small to mediumsized locations where additionalsecurity is needed chooseBC160/125+IS.
For heavy duty large locationswhere additional security isneeded choose BC200/175+IS.
Tap HeadChrome Plated.
N.B. For general installation andspecification details of theHydroTap range see page 12.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Product Model Max Max Power DimensionsCode Type Boiling Chilled Rating W x D x H
cups/ glasses/ kW @ (mm)hour hour 230V
BC200/175+IT Boiling/Chilled200 175 2.8 500 x 465 x 395with top-touch tap
BC160/125+IT Boiling/Chilled160 125 2.3 440 x 430 x 337with top-touch tap
BC200/175+IS Boiling/Chilled200 175 2.8 500 x 465 x 395with side-touch tap
BC160/125+IS Boiling/Chilled160 125 2.3 440 x 430 x 337with side-touch tap
‘+’ signifies models are free flow, ensuring cold filtered water continues when ‘chilledglasses/hour’ is exceeded during periods of high demand.
Standard cup 167ml. Standard glass 200ml.
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer enables the boiling and chilled waterunits to switch off automatically during known periods of inactivitye.g. overnight or weekends, but return to full functionality ahead ofthe next expected demand.
• Inactivity Sleep Mode enables the boiling water unit to power downor switch off after 2 hours non-use. Powering down allows the watertemperature to gradually reduce to 65˚C, at which it is maintained.Upon further draw off boiling resumes.
Drinkingwater
27Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Zip HydroTap® for the HomeInstant boiling and chilled filtered watersystems for home kitchens, large andsmall, traditional or contemporaryFeatures and benefits• No more waiting for water to boil
• No more bottled water to buy
• Easy to use
• Submicron filtration for greattasting healthy water
• Scale management filter option
• Can be sited next to sink or onoptional font and drain
• Highly energy efficient
• Child safety interlock
• Tap levers can be ‘locked’ forfilling of large vessels
• Measured dispense whenlevers are in upright position
• Power-pulse energy savingtechnology
• Sleep mode to save power
• Integral 24/7 timer
• Running costs of no morethan 15p per day plus 8 cupsof boiling water for 1p and 20glasses of chilled water for 1p.
Models available •Boiling and chilled filteredwater
• Boiling and chilled split(separate units)
• Boiling and cold (ambient)filtered water
• Boiling filtered water
• Chilled filter water
• All-in-One model with boiling,chilled, hot and cold waterfrom one tap.
• Choice of four tap and fontfinishes (except for All-in-One)
Warranty24 months on site parts andlabour warranty subject toregistration. These products arespecifically designed for use indomestic environments. Use ofthem in commercial applicationsmay invalidate the warranty.
N.B. For further details see ZipBrochure ‘Treat Yourself to aNew Way of Life’ or visit:www.zipheaters.co.uk
Product Model Boiling Chilled Total UndersinkCode Type Chamber Chamber Rating W x D x H
(litres) (litres) kW (mm)
DOMBC1 Boiling & Chilled 1.8 1.8 1.7 385 x 380 x 348
DOMBC2 Boiling & Chilled split 1.8 1.8 1.7280 x 323 x 337353 x 253 x 377
DOMBA1 Boiling & Ambient 1.8 – 1.5 280 x 323 x 337
DOMHB1 Boiling only 1.8 – 1.5 188 x 320 x 334
DOMBC1A All-in-One 1.8 1.8 1.8 385 x 380 x 348
DOMC1 Chilled only – 1.8 0.3 306 x 457 x 334
Drinkingwater
HydroTap font mountedAllow 35mm hole for tapfixing and 108mm for font
(template supplied)
All-in-one sink mountedAllow 35mm hole forfixing to surface or sink
26
Drinkingwater
29
Zip HydroTap®Miniboil Classic & Elite NEWSuper compact economy models forfiltered boiling and filtered cold(ambient) water for the homeD
rinkingwater
28 Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Models available• Boiling and cold (ambient)filtered water with Classic tap
• Boiling and cold (ambient)filtered water with Elite tap
Features and benefits• No more waiting for water toboil
• Easy to use touch pads
• Submicron filtration for greattasting healthy water
• Scale management filter option
• Can be sited next to sink or onoptional font and drain
• Inactivity sleep mode
• Filter change indicator
• Cool-touch tap
• Compact size makes it idealfor kitchens with limited space
• Highly energy efficient
• Safety interlock
• Power-Pulse™ technology
FiltrationSupplied with external tripleaction sub-micron filter.Additional anti-scale filtrationoption.
Warranty12 months on site parts andlabour warranty. These productsare specifically designed for usein domestic environments. Use ofthem in commercial applicationsmay invalidate the warranty.
N.B. For further details see ZipBrochure ‘Treat Yourself to a NewWay of Life’ or visit:www.zipheaters.co.uk
Product Model Boiling Total UndersinkCode Type Chamber Rating W x D x H
(litres) kW (mm)
Boiling & ColdMB1BA Classic Tap 1.8 2.0 212 x 272 x 338
Boiling & ColdMB2BA Elite Tap 1.8 2.0 212 x 272 x 338
Tap mounted on fontAllow 35mm hole for tapfixing and 108mm for font
(template supplied)
Tap mounted on sinkAllow 35mm hole for tapfixing to surface or sink
Zip Miniboil Elite
Zip Miniboil Classic Miniboil shown font mounted.
Drinkingwater
Drinkingwater
30 31Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Zip HydroTap®OptionsFinishes and practical solutions
Font and DrainZip HydroTap can be orderedwith a matching font anddrain for mounting remotelyfrom the sink.
Order Codes:ZT004 – ChromeZT104 – Brushed ChromeZT105 – Black ChromeZT106 – Gold Plated
Finishes NEWTraditional ZipHydroTap andfonts are availablein standard Brightchrome and a choiceof three additionalfinishes.
Over sized leversAll HydroTap models,except for models in theAll-in-One, Industrial andMiniboil ranges, can befitted with oversize leversto assist those with restricteddexterity.
Add ‘D’ to normal code whenordering.
Drainless FontFor locations where there isno available drainage, the Zip“Drainless Font” systemensures the safe andeffective collection of wastewater from a HydroTap font.
Order Code:ZT006
Black ChromeAdd ‘B’ to normalcode when ordering.
Brushed ChromeAdd ‘S’ to normalcode when ordering.
Gold PlatedAdd ‘G’ to normalcode when ordering.
Drinkingwater
Drinkingwater
32 33
Zip HydroTap® FiltrationAll HydroTap products featuresubmicron filtration
Triple Action filtrationUses submicron filters which arethe most technically advanced inthe world.
• Reduces:
• Chlorine taste and odour
• Dirt, rust, asbestos fibresand other particulates
• Parasitic protozoan cysts
• Limescale formation
• Removes:
• Micro-organisms down to1000th of a millimetre
• Parasites such asCryptosporidium and Gardia
Scale ManagementRecommended for use inlocations where limescale ispresent (see map opposite).
• Eliminates scale up to athroughput of 3000 litres
• Easy to install
• Horizontal or vertical mounting
• Easy to replace
• Reduces bad taste and odour
• Four stage filtration
• Pre-filter to remove largerparticles
• Ion exchange
• Activated carbon filter
• Fine filter
The sub-micron filter is encased for quickand easy replacement.
RedHard to very hard
YellowMedium hardness
GreenSoft
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
UK Scale Map
Product Description FL3000codes DimensionsFL004 Submicron system H x D (mm)ZT002 Submicron replacement cartridge 490 x 106
FL3000 Limescale filtration systemfor vertical or horizontal mounting
FL3001 Limescale replacement cartridge
ZT004 Font and DrainZT008 Font and Drain for Miniboil EliteZT006 Drainless Font
Drinkingwater
35Zip Service/Technical Support 0800 077 8302
Saves timeNo more time wasted waiting forwater to boil—Zip delivers boilingwater instantly, at the touch of atap.
Saves energyNo energy is wasted boiling morewater than needed—fingertipcontrol gives a cup full or teapotfull at a time.
Saves spaceNo cluttered worktops—Zipinstant boiling water eliminatesthe need for kettles and exposedpower leads.
Saves moneyCosts little to run—thanks toenergy-efficient design andelectronic controls (HydroboilPlus) to minimise powerconsumption.
Sets a new standardEvery working day in the UK overeight million cups of tea andcoffee are made using Zip instantboiling water systems.
Temperature controlZip’s patented high precisiontemperature control systems aredesigned to keep the boilingwater within one degree of theset temperature. This means thatboiling water and only boilingwater is delivered.
RangesZip offers a choice of threeranges:
Hydroboil PlusThermostatically controlled,twin chamber technology withstainless steel boiling tank.
Premium insulation and cooltouch two way tap with safetylock.
Energy saving Power-Pulse™
Sleep mode - after 2 hours of nodemand or when lights turned off.
Integral 24 hour 7 day timer.
Available in sizes from 3.0 to40.0 litres.
White or stainless steel finishes.
HydroboilThermostatically controlled,twin chamber technology withstainless steel boiling tank.
Premium insulation and chromecatering style tap.
Available in sizes from 1.5 to40.0 litres.
White or stainless steel finishes.
EconoboilThermostatically controlled, twinchamber technology with copperboiling tank.
Tontine insulation.
Chrome catering style tap.
Available in 3.0 & 5.0 litres.
White finish.
Customer Service 0845 602 453334
Drinkingwater Overview
Wall mounted instant boiling waterZip Hydroboil PlusZip Hydroboil®
Zip Econoboil
Instant boiling water heaters are essential appliances for theworkplace and are available in the widest range of models andcapacities.
Patented twin chambertechnology – uses steamto pre-heat incomingwater
Patented Steam-Heat-Boost system
Patented Teflon me-tering tuberegulates water
flow & temperature
Moulded hightemperature insulationminimises boiling waterheat loss
Zip Hydroboil Plus cuts energyconsumption in 5 ways
Steam-Heat-Boost SystemSteam from boiling water is recycled to pre-heat incomingcold water. A patented metering tube maintains the storedwater within 1°C of set temperature.
Power-Pulse™ energy saving technologyApplies full power only during heavy usage periods cuttingback to micro-pulse power during light usage or when un-used — not available on 40 litre model.
Inactivity sleep modeAfter 2 hours of non-use Hydroboil Plus enters sleep mode,allowing the water temperature to reduce to 65° at which itis maintained until next draw-off.
Low light sleep modeWhen activated, an integral light detector activates this facil-ity when room light is switched off and the unit enters sleepmode as above.
Integral 24 hour 7 day timerSwitches system off during known periods of inactivity,returning to full functionality ahead of next expected de-mand.
Drinkingwater
Drinkingwater
36 37
Zip Hydroboil PlusWall mounted instant boiling water3, 5, 7.5, 10*, 15*, 25*, 40* litre
*NEW
Heating elementLong-life incoloy sheathedembedded rod type.Dry start protection.
Boiling chamberTwin chamber-stainless steel.Steam-Heat-Boost technology.Crevice-free stainless steel withremovable access ports, top andbottom.
InsulationCompressed high temperatureinsulation panels on sizes below10 litres, engineered for easyboiling chamber access. Highefficiency aluminium backedmineral wool insulation on othersizes.
ThermostatThermistor controlled.
CaseStainless steel or corrosion-resistant, white enamelled steel.
Temperature SettingsOn installation, to suit user needs,the boiling water temperature canbe adjusted from 100˚C to 68˚C.
Control PanelLiquid Crystal Display shows time,day, heater operation and energysaving mode status. If used withan in-line filter, a filter change re-minder can be programmed.
TapUnique two-way cool touch tap.
Safety featuresIntegral safety lock.
ApprovalsWRAS, CE endorsed.
WarrantyTwo-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warranty
InstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan necessary to fill large pots.Minimum tap height abovedraining board for on-wallmaintenance is 200mm.
PlumbingDesigned for direct connection toa potable cold water supply witha minimum pressure of 1 bar. Ifpressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the watersupply and the heater.
Concealed plumbingConnect inlet and vent pipes fromthe rear via 15mm capillary elbows.
Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings.
VentingThe vent must discharge to asafe visible position using atundish.
ElectricalTo be wired to a double polefused spur with a minimum breakcapacity of 13 amps. Installationmust comply with current IEEregulations.
CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip InLine filter.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Energy ConservationThe installer can select one of two programmable energy
saving modes –
• Integral 24 hour 7 day timer enables the unit to switch offautomatically during known periods of inactivity e.g. overnight or atweekends, returning to full functionality ahead of the next expecteddemand.
Sleep Modes
• Inactivity Sleep Mode. Following a period of 2 hours non-useHydroboil Plus automatically enters sleep mode when the unit powersdown allowing the water temperature to gradually reduce to 65˚C, atwhich it is maintained. Upon further draw off boiling resumes.
and/or
• Low light Sleep Mode. An integral light detector automaticallyactivates sleep mode (as above) when room lights are switched off,returning to normal operation when the next draw off occurs or thelighting is switched back on.
Zip Hydroboil Plus with cool touch tap and energy saving features
Product Code Capacity Delivery Recovery Rating DimensionsCase Finish litres cups*at any cups* kW H x W x D
s/steel white one time per hour (@ 230V) (mm)
HP103 HP003 3.0 18 100 1.5 431x 289 x 180
HP105 HP005 5.0 30 140 2.4 465 x 318 x 198
HP107 HP007 7.5 45 140 2.4 578 x 318 x 198HP110 HP010 10.0 60 180 3.0 600 x 390 x 244HP115 HP015 15.0 90 180 3.0 600 x 390 x 299HP125 HP025 25.0 150 180 3.0 780 x 390 x 299HP140 HP040 40.0 240 360 2 x 3.0 840 x 515 x 284
*Standard cup size 167ml
Drinkingwater
38Drinkingwater
39
Zip Hydroboil®Wall mounted instant boiling water1.5, 3, 5, 7.5, 10, 15, 25, 40 litre
Heating elementLong-life incoloy sheathedembedded rod type. Dry startprotection.
Boiling chamberTwin chamber-stainless steel.Steam-Heat-Boost technology.Crevice-free stainless steel withremovable access ports, topand bottom.
InsulationCompressed high temperatureinsulation panels on sizes below10 litres, engineered for easyboiling chamber access. Highefficiency aluminium backedmineral wool insulation on othersizes.
ThermostatCapillary type.
CaseStainless steel or corrosionresistant white enamelled steel.
TapTwo way, chrome-plated classic,catering style.
ApprovalsWRAS, CE endorsed.
WarrantyTwo-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warranty
InstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan is necessary to fill largepots. Minimum tap height abovedraining board for on-wallmaintenance is 200mm.
PlumbingDesigned for connection to apotable cold water supply witha minimum pressure of 1 bar. Ifpressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the mainssupply and the system.
Concealed plumbingConnect inlet and vent pipes fromthe rear via 15mm capillaryelbows.
Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings.
VentingThe vent must discharge to asafe and visible position usinga tundish.
ElectricalTo be wired to a double polefused spur, minimum breakcapacity of 13 amps.Installation must comply withcurrent IEE regulations.
CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip Inline filter.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Zip Hydroboil®with Classic tap
Product Code Capacity Delivery Recovery Rating DimensionsCase Finish litres cups*at any cups* kW H x W x D
s/steel white one time per hour (@ 230V) (mm)
– HS001 1.5 9 100 1.5 335 x 289 x 180– HS003 3.0 18 100 1.5 431 x 289 x 180
HS105 HS005 5.0 30 140 2.4 465 x 318 x 198HS107 HS007 7.5 45 140 2.4 578 x 318 x 198HS110 HS010 10.0 60 180 3.0 600 x 390 x 244HS115 HS015 15.0 90 180 3.0 600 x 390 x 299HS125 HS025 25.0 150 180 3.0 780 x 390 x 299HS140 HS040 40.0 240 360 2 x 3.0 840 x 515 x 284
*Standard cup size 167ml
Drinkingwater
Drinkingwater
40 41
Zip Econoboil®Wall mounted instant boiling water3 & 5 litre
Heating elementEmbedded rod type.
Boiling chamberTwin chamber in copper.Steam-Heat-Boost technology.
InsulationAluminium backed Tontine.
ThermostatCapillary type.
CaseCorrosion resistant whiteenamelled steel.
TapTwo way, chrome-plated classic,catering style.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of the ZipWarranty visit:www.zipheaters.co.uk/warranty
InstallationInstall over a draining board, orwork top fitted with a drip tray.Tap spout should be no higherthan is necessary to fill largepots. Minimum tap height abovedraining board for on-wallmaintenance is 200mm.
PlumbingDesigned for connection to apotable cold water supply witha minimum pressure of 1 bar.If pressure exceeds 7 bar apressure limiting valve must befitted. An isolating valve shouldbe installed between the mainssupply and the system.
Concealed plumbingConnect inlet and vent pipesfrom the rear via 15mm capillaryelbows.
Exposed plumbingConnect inlet and vent pipesfrom below directly to 15mmcompression fittings
VentingThe vent must discharge to asafe and visible position using atundish.
ElectricalTo be wired to a double polefused spur, minimum breakcapacity of 13 amps.Installation must comply withcurrent IEE regulations.
CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip Inline filter.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Zip EconoboilThe low cost boiling water solution for locations where economy is of the essence
Product Code Capacity Delivery Recovery Rating DimensionsCase finish litres cups*at any cups* kW H x W x D
s/steel white one time per hour (@ 230V) (mm)
– HS503 3.0 18 100 1.5 431 x 289 x 180– HS505 5.0 30 140 2.4 465 x 318 x 198
*Standard cup size 167ml
Drinkingwater
43
Drinkingwater Zip Duo®
Boiling and chilled filtered waterOn-wall fixing or counter-mounted on stand provided
Delivery rateUp to 100 cups of boiling and 35glasses of chilled water at a time.
Recovery rateUp to 217 boiling cups/hour.90 chilled glasses/hour.
CaseStainless steel or corrosion-resistant, white enamelled steel.
TapsTwo way, classic style cateringtaps.
FiltrationIntegral submicron filtration.
Control panelFor programming sleep mode,timer and water temperature.
RefrigerantR134A.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
Temperature SettingsOn installation, to suit userneeds, the boiling watertemperature can be adjustedfrom 100˚ to 68˚C.
LocationThe unit should be positionedeither on a suitable load bearing
wall capable of supporting42kg - 5 litre, 64kg - 15 litre oron the counter mounting standsupplied. The unit must have aminimum 150mm clearance onthe left, 50mm on the right and150mm on top.
Minimum tap height, if wallmounted should be 200mmabove work surface. The ventmust discharge to a safe andvisible place.
PlumbingThe water supply must bepotable (drinkable).
If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted. An isolating valveshould be installed between thewater supply and the unit.
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps (3.5kW 15 amp).Installation must comply withcurrent IEE regulations.
HD215 & HD315 should beprovided with their owndedicated supply.
CautionIn some hard water areas wherescale is an issue we recommendthe fitting of the Zip FL3000scale management system(see page 31).
42 Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Energy ConservationA choice of two programmable energy saving modes –
• Integral 24 hour 7 day timer to enable the boiling and chilledunits to switch automatically off during known periods of inactivitye.g. overnight or weekends but return to full functionality ahead ofthe next expected demand.
• Inactivity sleep mode enables the boiling water unit to powerdown automatically following a period of 2 hours non-use. Thisallows the water temperature to gradually reduce to 65˚C, atwhich it is maintained. Upon further draw off boiling resumes.
Zip Duo
Product Code Delivery Recovery Weight Rating DimensionsCase finish at any one time Cups Glasses kg full kW @ H x W x D
S/Steel White Cups Glasses per hr per hr 230V (mm)
HD105 HD005 30 35 120 90 42 2.0 430 x 650 x 280HD115 HD015 100 35 140 90 64 2.3 580 x 700 x 350HD315 HD215 100 35 217 90 64 3.5 580 x 700 x 350
Standard cup 167ml. Standard glass 200ml.
Cup DispensersZE001 Stainless steelZE002 White plastic
Counter StandsZE004 For HS001ZE006 For HS003,ZE007 For HS005, HS105,
HP005, HP105ZE008 For HS007, HS107,
HP007, HP107
TundishZD100 Wall mounted chromed
tundishZD101 Sink mounted chromed
tundish
Universal Mounting BracketWhen a Zip Hydroboil replaces a HeatraeSadia, Calomax or Instanta product thisbracket may be used to secure the Hy-droboil using existingfixings.
ZP001 3 and 5 litreZP002 7.5 litre
Accessories
45
Zip AccessoriesBoiling water
Zip AccessoriesBoiling water
Accessories
44 Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Hydroboil Extra Tap Kits(tap extension pipework)ZC100 For 10, 15 and 25 litre
heaters, up to 2 taps(excludes taps)
SP90502 Tap for above
In-Line FiltersFL064 6” filter for taste and
odour removal with scalereduction. For use withHydroboil up to 7.5 litre.
FL104 10” filter for taste andodour removal with scalereduction. For use withHydroboil 10 litre andabove.
Mug RacksZE010 Stainless steel
(for Classic Tapmodels only)
ZE011 Stainless steel(for Hydroboil Plusmodels only)
Drip TraysZD001 Stainless steel (with drain)ZD002 Stainless steel (no drain)
Drip TrayDimensions
OverviewChilled, filtered water
Drinkingwater
Drinkingwater
Zip’s mains fed chillers are designed for work place and homeenvironments, where they provide fresh filtered drinking water.
Features and benefits
Provides drinking water at a fraction of the cost of bottled water
• No more bottled water to buy
• No more bottled water to store
• No more bottled water to handle
• No more environmental issues associated with bottled water
• No more running out of drinking water during periods of highdemand such as hot weather
• Features the most technically advanced submicron filtrationsystem for healthier, better tasting drinking water
• Reduces chlorine taste and odour
• Filters out contaminants down to 1 micron
• Reduces parasitic protozoan cysts such as Cryptosporidiumand Giardia
• Reduces dirt, rust and asbestos fibres
• Inhibits the accumulation of limescale deposits
46 47
Zip HydroTapZip ChilltapZip ChillmasterZip Chill FountainZip Wall FountainChilled water for the home NEW
Good hydrationWater is a vital nutrient for life.Everybody wants to be healthyboth at home and at work, wherea healthier workforce leads toimproved efficiency.
Even mild levels of dehydrationadversely affect both physicaland mental performance.
There is currently no agreementon how much water we shoulddrink each day but estimatesrange from 1.2 to 3 litres per day.
The need for consumption at thetop of these estimates wouldapply to those working in hot ordusty environments or wherethere is a need to wear protectiveclothing.
Access to drinking waterThe law requires that employersprovide an adequate supply ofwholesome drinking water for allpersons in the workplace. Thismust be readily available atsuitable places. Drinking watershould not be sited wherecontamination is likely such astoilet or washroom facilities.
In the home, saving the cost ofbottled water and the advantageof freeing up space in the fridgecan be a significant benefit.
More information is available fromthe Health and Safety Executiveby visiting: www.hse.gov.uk
Source: www.water.org.uk
Drinkingwater
Drinkingwater
48 49
Zip HydroTap®
Filtered chilled water systemC Series
Delivery rateUp to 18 glasses of chilled waterat a time.
Rating0.3 kW @ 230V AC.
Chilling systemFan-cooled condenser type.
RefrigerantR134A.
Tap headChrome plated, die cast tapbody with push and pull leversfor electronically controlled waterdelivery, integral LED indicators.
Disabled OptionOversize tap levers.
Under counter unitHouses chilled and filtrationsystems. Corrosion resistantwhite enamelled steel case, withfront access door.
Control panelLocated on under counter unit tocontrol timer and water delivery.
Filtration systemIntegral triple-action, submicron,encapsulated cartridge.
Safety featuresUndercounter safe tray with leakdetector.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
InstallationThe tap should be positionedeither on a suitable sink or on aZip Tap Font. If installing on asink, the tap should be mountedso that it will dispense into thesink.
The undersink unit should belocated if possible directlybeneath the tap and not morethan 1 metre away. It must beinstalled with clearances of50mm left and right and 65mmat rear.
PlumbingThe water supply must bepotable (drinkable).
If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted. An isolating valveshould be installed between thewater supply and the under-bench unit.
VentingThe cupboard containing thechilling unit must be amplyventilated: cupboard doors mustbe offset all round for ventilation,using buffers provided and thevent fitted (supplied).
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.
Energy ConservationProgrammable operation
• Integral 24 hour 7 day timer enables the chilled water unit to switchoff automatically during known periods of inactivity e.g. overnight orweekends, but return to full functionality ahead of the next expecteddemand.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
C125 – 125 0.2 306 x 457 x 334
Drinkingwater
50
Product Product DimensionsCode Type H x W x D
(mm)
CH103 Zip Chilltap, undersink 385 x 355 x 290
Drinkingwater
51
Zip Chilltap®
Under-sink chillerFiltered drinking water
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
sink
Features and benefits
Great tasting freshly filteredcool drinking water for fittingon a sink.
Filters out dirt, rust and otherparticles contaminatingdrinking water.
Reduces chlorine and otheroffensive water treatmentchemicals.
Delivers up to 140 glassesper hour.
Submicron filtration.
Storage capacityNominal 8 glasses.
Output capacityUp to 140 glasses per hourat
Drinkingwater
53Zip Service/Technical Support 0800 077 8302
Product Product DimensionsCode Type H x W x D
(mm)
CH101 Zip Chillmaster, floor standing 915 x 350 x 350
CH102 Zip Chillmaster, wall mounted 530 x 350 x 350
Features and benefits
Great tasting freshly filtered cooldrinking water for high usage andpublic access areas.
Heavy duty, easy-to-cleanstainless steel bowl and stainlesssteel case.
Filter change reminder lightsignals when filter cartridgereplacement is due.
Filter cartridges are quick andsimple to change.
Submicron filtration.
Storage capacityNominal 8 glasses.
Output capacity140 glasses per hour at
Drinkingwater
55Zip Service/Technical Support 0800 077 8302
Drinkingwater
54 Customer Service 0845 602 4533
Zip Wall Fountain®Recessed chillerFiltered drinking water
Features and benefits
Recessed chiller ideal forproviding chilled filtered waterwhere space is at a premium.
Perfect for installing in busycorridors.
Submicron filtration.
Storage capacityNominal 8 glasses.
Output capacityRated at 140 glasses per hourat
Drinkingwater
57
Drinkingwater
56 Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
303mm
385mm
Double bowl width
Single bowl width
Product Product type DimensionsCode Single bowl H x W x D
(mm)
CH105 Zip Chill Fountain (adult) 1140 x 500 x 410
CH145 Zip Chill Fountain (child) 1140 x 500 x 410
CH115 Zip Chill Fountain (wheelchair) 1140 x 500 x 490
Product Product type DimensionsCode Double bowl H x W x D
(mm)
CH155 Zip Chill Fountain (adult/adult) 1140 x 1005 x 410
CH165 Zip Chill Fountain (child/child) 1140 x 1005 x 410
CH135 Zip Chill Fountain (wheelchair/wheelchair) 1140 x 1005 x 490
CH125 Zip Chill Fountain (adult/child) 1140 x 1005 x 410
CH175 Zip Chill Fountain (adult/wheelchair) 1140 x 1005 x 490
CH185 Zip Chill Fountain (child/wheelchair) 1140 x 1005 x 490
Zip Chill Fountain®Wall mounted chillerFiltered drinking water
Features and benefits
The perfect heavy dutysolution for public areas whereconfigurations for adults, childrenor wheelchair access may benecessary.
Bump action electronic controlsfor wheelchair usage andlockable front panels.
Heavy duty, easy-to-cleanstainless steel bowls andstainless steel case.
Can be configured for adult, childor wheelchair usage.
Submicron filtration.
Storage capacityNominal 8 glasses.
Output capacityRated at 140 glasses per hourat
Drinkingwater
59
Drinkingwater
58 Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Delivery rateUp to 18 glasses of chilled waterat a time.
Rating0.3 kW @ 230V AC.
Chilling systemFan-cooled condenser type.
RefrigerantR134A.
Tap headChrome plated, die cast tapbody with push and pull leversfor electronically controlled waterdelivery, integral LED indicators.
Disabled 0ptionOversize lever taps.
Under counter unitHouses chilled and filtrationsystems. Corrosion resistantwhite enamelled steel case, withfront access door.
Control panelLocated on under counter unit tocontrol timer and water delivery.
Filtration systemIntegral triple-action, submicron,encapsulated cartridge.
Safety featuresUndercounter safe tray with leakdetector.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
InstallationThe tap should be positionedeither on a suitable sink or on aZip Tap Font. If installing on asink, the tap should be mountedso that it will dispense into thesink.
The undersink unit should belocated if possible directlybeneath the tap and not morethan 1 metre away. It must beinstalled with clearances of50mm left and right and 65mmat rear.
PlumbingThe water supply must bepotable (drinkable).
If static pressure exceeds 7 bar,a pressure reducing valve mustbe fitted. An isolating valveshould be installed between thewater supply and the under-bench unit.
If water pressure is above 7 bar apressure reducing valve (AQ3)should be used (see page 82).
VentingThe cupboard containing thechilling unit must be amplyventilated: cupboard doors mustbe offset all round for ventilation,using buffers provided and thevent fitted (supplied).
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.
Energy ConservationProgrammable operation
• Integral 24 hour 7 day timer enables the chilled water unit to switchoff automatically during known periods of inactivity e.g. overnight orweekends but return to full functionality ahead of the next expecteddemand.
Zip HydroTapChilled water for the Home
Product Maximum Maximum Power DimensionsCode Boiling Chilled Rating W x D x H
cups/hour glasses/hour kW @ 230V (mm)
DOMC1 – 125 0.3 305 x 455 x 340
Tap mounted on sinkAllow 35mm hole for tapfixing to surface or sink
Tap mounted on fontAllow 35mm hole for tapfixing and 108mm for font
(template supplied)
Drinkingwater
60Drinkingwater
61Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Chilled WaterFor the Home
Features and benefits
• Fingertip control for filling glasses
• Hands-free filling for large jugs and bottles
• Superior sub-micron water filter
• Filter change every 12 months
Zip Chilltap Extra NEW
• Chilled filtered water, instantly
• Plus filtered cold (ambient)water
Zip Chilltap NEW
• Chilled filtered water, instantly
Zip Filter Tap NEW
• Filtered cold (ambient) water
Zip Font and Drain
• Allows sighting away from thesink
• For connection to waste
Product Zip Chilled Cold Chilled Total Under-sinkCode Model Water Water Glasses/ Rating Dimensions
Hour kW H x W x D(mm)
DOMCT1 Chilltap ✔ ✔ 60 0.245 377 x 353 x 253ExtraDOMCT2 Chilltap ✔ – 60 0.245 377 x 353 x 253DOMFT1 Filter Tap – ✔ – – –ZT004 Optional font and drain for all above
Drinkingwater
62Drinkingwater
63
Chilled waterAccessories
Chilled waterAccessories
ZE001
Stainless steel dispenserfor disposable cups
ZI001
Optional drinking bubbler
ZD003
Waste water dish for installationwhere drainage is not available
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
BREEAM(BRE EnvironmentalAssessment Method)sets the standard for bestpractice in sustainabledesign and has becomethe de facto measureused to describe abuilding’s environmentalperformance.
The BREEAM Health andWell Being credit HEA16(drinking water) requireschillers to be installed incompliance with industrystandard.
ZG500 (right) enablesthe Zip Chillmaster to fullycomply with theserequirements (see page53).
Zip Water Block
HE45004Recommended to befitted in the water supplyline to all Zip chilledproducts (exceptHydroTap) to minimisethe potential damage inthe event of leakage.
Hotwater
Hotwater
Zip offers one of the widest and most sophisticatedranges available in the UK
Instantaneous
• No standing heat loss, only heats water as required.
• Unlimited supply of hot water - subject to conditions and demand.
• Electronic temperature control automatically compensates forfluctuations in incoming water temperature and pressure
Choose from:
ES; 3.1, 4.8 & 6.0kW (see pages 68-69)
ILX; 7.2, 9.6 & 13.5kW (see pages 72-73)
CEX; 6.6-8.8, selected at time of installation (see pages 74-75)
DEX & DBX 18, 21, 24 & 27kW (see pages 76-77)
Unvented
• Fed directly from cold water mains
• Quicker to install with no need for cold water storage cistern
• Balanced hot and cold water supplies
• High performance showering and faster filling baths
• No special taps needed
Choose from:
Aquapoint, 5 to 100 litres (see pages 80-81 & 86-87)
Varipoint, 10 to 100 litres (see pages 82-83 & 88-89)
AquaFlo, 90 to 300 litres (see pages 90-93)
Open Vented
• Easy to install
• Single point of use
• Overbasin and underbasin variants
• Overbasin includes spout and valve
• Underbasin requires vented taps
Choose from:
Tudor, 5 & 10 litres (see pages 94-95)
Contract, 5 & 10 litres (see pages 96-97)
Cistern Fed Storage
• For installations where main fed systems are not an option
• Can serve multiple outlets
• Can be installed in ceiling voids
• Reliable, ‘fit and forget’ solution
Choose from:
RCH, 25 to 100 litres (see pages 98-99)64 65
OverviewEnergy-efficient water heaters
Hotwater
Hotwater
Why Zip InLine instantaneouswater heating?Zip InLine instantaneous waterheaters are the most energyefficient way of directly heatingwater electrically.
Using the very latest Germantechnology, Zip InLine offers ahost of Specifier, Installer andEnd User benefits:
• Unrivalled energy efficiency–No standing heat loss
• Sophisticated electroniccontrol
• Unlimited hot water supply
• Easy to install
• Compatible with standardtapware
• Neat compact design
• Tangible water savings
Energy efficiencyZip Inline saves energy by:
• Heating only the waterdrawn off
• Avoiding stored waterheat losses
When comparing the energyused over 24 hrs to deliver 75litres of water at 38°C (assuming12°C supply) typical savings of23% can be achieved.
N.B. Percentage savings may beless with increased demand butmore during periods without drawoff.
66 67
Zip InLineinstantaneous water heatingThe inside story
Product Energy Usage
15 litre storagewater heater 3.0kWh
Zip InLine 2.3kWh
Traditional system Litres savedpipe run per draw off
10 metres 3.2
* Subject to sufficient power being available to achieve the requiredtemperature and outlet flow under local conditions.
Customer Service 0845 602 4533 Zip Service/Technical Support 0800 077 8302
Bare wire technologyThe Zip ES, ILX012, DEX andDBX models feature bare wireheating technology usingstainless steel elements directlyimmersed in the water flowpath.This system achievesmaximum efficiency by means ofdirect contact with the water flowplus the fastest possible heat uptimes, typically less than 2seconds.
Unlimited supply of hot water *Zip InLine will deliver a continuoussupply at the selected temperature.
Easy installationZip InLine products simply connectto standard closed outlet tapswithout the need for unventedwater controls.
Smart designThe unit’s compact size enablesit to fit neatly and unobtrusively inany location.
Water conservationZip InLine is designed forinstallation close to the point ofuse, avoiding the need for waterto be run off before achievingtemperature.
Savings per draw off comparedto centralised systems with longpipe runs are as follows:
Product Product Rating *38˚C Max DimensionsCode kW @ 240V Flow Rate H x W x D
ltrs/min (mm)
Instantaneous
ES3 Zip Inline 3.1 1.7 132 x 187 x 80
ES4 Zip Inline 4.8 2.6 132 x 187 x 80
ES6 Zip Inline 6.0 3.3 132 x 187 x 80
*Maximum flow rate based upon incoming water temperature of 12°C.
Hotwater
69Zip Service/Technical Support 0800 077 8302
Zip Inline ES®Electronic instantaneouswater heaterSingle outlet for hand washing
Hotwater
68 Customer Service 0845 602 4533
Features and benefits
Compact electronically controlledinstantaneous water heater forhand washing.
Bare-wire for fast heat up.
Innovatively designed appliancethat heats the water automaticallyas it flows through.
No standing heat losses.
Heating power automaticallyadjusted to compensate forvariable inlet pressure andtemperature. Supplied with700mm of pre-wired cable.
Intended for use with taps havingremovable M22/M24 nozzles.
Easy to install with clip-onmounting bracket.
OperationHeating power is switched onautomatically once the minimumflow rate is exceeded.
RatingES3 3.1kW @ 240V.ES4 4.8kW @ 240V.ES6 6.0kW @ 240V.
Heating systemBare-wire heating system for fastresponse.
Safety featureWater temperature electronicallycontrolled to maintain factorysetting of 38°C.
IP ratingIP 24.
Product SelectionInstantaneous water heating is themost efficient available, however,delivered water temperature isdependent on local incomingwater temperature and supplyvoltage. Quoted performanceassumes 12°C incoming watertemperature and 240V supply.
CaseImpact resistant plastic.
ApprovalsWRAS, VDE, CE endorsed.
Temperature settingTemperature and flow adjustableat time of installation.
Taps - ImportantFor correct operation it isessential that the special tapnozzle supplied is fitted tothe tap spout.
Nozzles supplied to suitM22/24 taps should be used.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
LocationThe appliance must be installedin a frost free environment.
PlumbingThe appliance is intended forconnection to the mains watersupply. It should be installed bya suitably qualified person. Theappliance may be used as anunvented or vented installation.
N.B. Not recommended for usewith thermostatic mixing valvesor taps.
ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough suitable isolation havinga contact separation of at least3mm in all poles. Installationmust comply with current IEEregulations.
Technical Data
Maximum temperature increase@ 240V and a flow rate of: ES3 ES4 ES6
2.0 litres/min 22°C 34°C 43°C
2.5 litres/min 18°C 27°C 34°C
3.0 litres/min 15°C 23°C 29°C
3.5 litres/min 13°C 20°C 24°C
4.0 litres/min 11°C 17°C 21°C
Switch on flow rate (litres/min) 1.2 1.5 1.5
Switch off flow rate (litres/min) 1.0 1.3 1.3
71Zip Service/Technical Support 0800 077 830270 Customer Service 0845 602 4533Hotwater
Hotwater Zip InLine ES®
Instantaneous hand wash packs –complete with heater, tap & fittings
Isolatingvalve
Flow rateadjuster Non
returnvalve
NC Pack (non-concussive tap)
MT Pack (mixer tap)
These new packs provide the installer with the ESheater, compatible tap and a comprehensiveplumbing kit including flexible hoses and fittings toensure quick and easy system installation.
The packs are offered in a choice of 3 power ratingswith non-concussive or mixer tap.
Non-concussive (NC) pack:
• ES instantaneous water heater
• Non-concussive single outlet tap
• 50cm flexible hose for connectionto heater
• 50cm flexible hose for connectionto tap
(Isolating valve NOT supplied)
Mixer Tap (MT) pack:
• ES instantaneous water heater
• Single lever mixer tap completewith braided hoses
• 50cm braided hose for connectionto heater
• Flow rate adjuster for cold supply
• Non-return valve for hot supply to tap
• Tee piece connector
(Isolating valve NOT supplied)
ApprovalsWRAS, VDE, CE endorsed
Product Tap Type Rating *38˚C Max Flow RateCode kW @ 240V ltrs/min
ES3/NC Non-concussive 3.1 1.7
ES4/NC Non-concussive 4.8 2.6
ES6/NC Non-concussive 6.0 3.3
ES3/MT Single lever mixer 3.1 1.7
ES4/MT Single lever mixer 4.8 2.6
ES6/MT Single lever mixer 6.0 3.3
ZL018 Matching non-concussive cold tap
Matchingcold tap
Isolatingvalve
Hotwater
73Zip Service/Technical Support 0800 077 8302
Hotwater
72 Customer Service 0845 602 4533
Zip Inline® ILXElectronic instantaneouswater heaterSingle outlet
Product Product Rating *45˚C Max *38˚C Max DimensionsCode kW Flow Rate Flow Rate H x W x D
ltrs/min ltrs/min (mm)
instantaneous
ILX006 Zip Inline 7.2 @ 240V 3.0 4.0 330 x 210 x 110
ILX009 Zip Inline 9.6 @ 240V 4.0 5.2 330 x 210 x 110
ILX012 Zip Inline 13.5 @ 400V 5.7 7.4 330 x 210 x 110
*Maximum flow rate based upon incoming water temperature of 12°C.
Features and benefits
Provides instant hot waterwithout need for storage.
Gives a constant supply ofhot water at the set temperature.
Single Phase and Three Phaseoptions.
OperationHeating power is switched onautomatically once the minimumflow rate is exceeded.
‘Heater on’ indication.
RatingsILX 006 7.2kW @ 240V.ILX 009 9.6kW @ 240V.ILX 012 13.5kW @ 400V.
Heating systemTubular element (7.2 & 9.6kW).Bare-wire system (13.5kW).
Safety featureAutomatic power reduction toavoid excessive temperatureswith visual indication.
FilterIntegral. Easy to clean, combinedfine filter and strainer with flowrate adjustment valve.
IP ratingIP 25. May be used in zone 1.
Flow rate Ifheating power is insufficient toachieve the selected flow rate avisual indication encouragesusers to readjust.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
Temperature settingEasily adjustable for requiredtemperature and electronicallycontrolled.
LocationThe appliance must be installedin a frost free environment.
To avoid distribution losses, thedistance between the heater andthe outlet should be as short aspossible (less than 2m).
For optimum flowcharacteristics use with Ziptap spray nozzles or hand sets.
Plumbing1⁄2” BSP connections.
Minimum flow requirements:2 litres/min.
Should be installed by a suitablyqualified person.
N.B. Not recommended for usewith thermostatic mixing valvesor taps.
ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough suitable isolation havinga contact separation of at least3mm in all poles. Installationmust comply with current IEEregulations.
The cross sectional area of theconnection cable must be inaccordance with the power ratingof the appliance.
ILX012 requires three phaseelectrical supply.
Technical Data
Maximum temperature increase@ 240V and a flow rate of: ILX006 ILX009 ILX012
3.0 litres/min 34°C 46°C 55°C
4.0 litres/min 26°C 34°C 48°C
5.0 litres/min 21°C 27°C 38°C
6.0 litres/min 17°C 23°C 32°C
Factory set flow rate (litres/min) 3.5 4.5 5.0
Switch on flow rate (litres/min) 2.0 2.0 2.0
Switch off flow rate (litres/min) 1.8 1.8 1.8
Hotwater
75Zip Service/Technical Support 0800 077 8302
Hotwater
74 Customer Service 0845 602 4533
Product 25˚C Max Temperature Power DimensionsCode Flow Rate setting range Rating H x W x D
ltrs/min (°C) (kW @ 230V) (mm)
CEX 3.8 20-55 6.6/8.8* 330 x 210 x 110
* Selected at time of installation
Zip Inline®CEX NEWOver and Undersink ElectronicInstantaneous Water Heaters forSingle or Multiple Outlets
Features and benefits
• The most energy efficient wayof directly producing hotwater electrically.
• Highly efficient bare wireheating system.
• Zero standing heat loss as nostored water.
• Instant hot water.
• Provides a constant supply ofhot water at exactly thetemperature selected.
• Heating power adjustedelectronically to compensatesfor variable inlet pressures andtemperatures.
• Required temperature can beset using two touch sensitivekeys within the range 20°C to55°C with digital display.
• Maintains precise temperaturecontrol despite fluctuations involtage and water pressure.
• Suitable for use withpreheated water from solarsystems.
• Power rating can be selectedat time of installation.
• Optional wireless control(ZL016).
• CEX-O for oversink CEX-Ufor undersink installation.
Ratings6.6kW—8.8kW. Selected atinstallation.
Heating SystemBare-wire system.
IP RatingOversink P25 Undersink IP24Suitable for Zone 1.
ApprovalsWRAS, VDE & CE endorsed.
Warranty1 year on site parts and labour.For full details visit:www.zipheaters.co.uk/warranty
LocationThe appliance must be installedin a frost free environment.
In order to minimise thermallosses the distance between theappliance and the outlet fittingshould be as short as possible.
PlumbingThe appliance is intended forconnection to a mains potablewater supply. The specific waterresistance of the supply must notfall below the minimum specifiedon the rating plate.
Minimum flow rate 2 litres/min.
Should be installed by a suitablequalified installer of electricinstantaneous water heaters.
ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough an isolation switchhaving a contact separation of atleast 3mm on all poles andprotected by a suitably ratedcircuit breaker.
The cross sectional area of theconnection cable must be inaccordance with the poser ratingof the appliance.
The installation must be inaccordance with current IEEregulations.
Hotwater
77Zip Service/Technical Support 0800 077 8302
Hotwater
76 Customer Service 0845 602 4533
Product Power Max@ Max@ Max DimensionsCode Rating ∆t=28k ∆t=38k Flow Rate H x W x D
(kW @ 3/PE (ltrs/min) (mm)380-415V)
18 9.2(2) 6.8 8.0(3) 380 x 210 x 110
DEX21 10.7(2) 7.9 8.0(3) 380 x 210 x 11024 12.3(2) 9.0(2) 8.0(3) 380 x 210 x 11027(1) 13.8(2) 10.2(2) 8.0(3) 380 x 210 x 110
DBX 18 18 9.2(2) 6.8 7.0(3) 380 x 210 x 110
DBX 21 21 10.7(2) 7.9 8.0(3) 380 x 210 x 110
DBX 24 24 12.3(2) 9.0(2) 8.0(3) 380 x 210 x 110
DBX 27 27(1) 13.8(2) 10.2(2) 9.0(3) 380 x 210 x 110
ZL017 Optional remote control for DEX
(1) Maximum 400V for DEX and DBX at 27kW.(2) Mixed with cold water at the outlet.(3) Flow rate limited to achieve optimum temperature rise.
Zip InLine® DEX & DBX NEWElectronic InstantaneousWater Heaters for Single orMultiple OutletsFeatures and benefitsAll models
• The most energy efficient wayof directly heating waterelectrically.
• Highly efficient bare wireheating system.
• Zero standing heat loss as nostored water.
• Instant hot water.
• Provides a constant supply ofhot water at exactly thetemperature selected.
• Heating power adjustedelectronically to compensatefor variable inlet pressures andtemperatures.
• Maintains precise temperaturecontrol despite fluctuations involtage and water pressure.
• Optional remote controltemperature selection(using ZL017)
DBX:Outlet temperature set to 50°Cadjustable inside the appliancefrom 30°C to 60°C.
DEX:• If required, two temperaturesettings can be set using the
touch sensitive keys within therange 20°C to 60°C withdigital display.
• Suitable for use with preheatedwater from solar systems.
• Power rating can be selectedat time of installation.
RatingsDEX 18-27kW (adjustable)DBX 18kW,21kW, 24kW & 27kW.
Heating SystemBare-wire system.
IP Rating IP25 – Suitable for Zone 1.
ApprovalsWRAS, VDE & CE endorsed.
Warranty1 year on site parts and labour.For full details visit:www.zipheaters.co.uk/warranty
LocationThe appliance must be installedin a frost free environment.
In order to minimise distributionlosses the distance between theappliance and the outlet fittingshould be as short as possible(less than 2m).
PlumbingThe appliance is intended forconnection to a mains potablewater supply. The specific waterresistance of the supply must notfall below the minimum specifiedon the rating plate.
Minimum flow requirements:2 litres/min.
Should be installed by a suitablyqualified person.
N.B. Not recommended for usewith thermostatic mixing valvesor taps.
ElectricalThe appliance must be earthedand connected to the supply bymeans of permanent wiringthrough an isolation switchhaving a contact separation of atleast 3mm on all poles andprotected by a suitably ratedcircuit breaker.
The cross sectional area of theconnection cable must be inaccordance with the power ratingof the appliance.
The installation must be inaccordance with current IEEregulations.
Hotwater
79Zip Service/Technical Support 0800 077 8302
Zip InLineinstantaneous water heatingInstantaneous flow andtemperature rise chart
Hotwater
78 Customer Service 0845 602 4533
Zip InLineAccessoriesOptimum performance
For the best results from the Zip InLine products the following tapspray nozzles, handsets and remote control should be used.
110
126
65
60
55
50
45
40
35
30
4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.0 14.0Flow Rate (l/min) mixed with cold water at the outlet
Delivered
Temp(˚C)w
ith12˚Cam
bient
Touch-free taps for use with Zip InLine
Tap spray nozzleCode Type Flow rates fromZL002 22mm female thread 2.0 litres/min
ZL003 24mm male thread 2.0 litres/min
Tap aerator nozzleCode Type Flow rates fromZL008 15mm insert 3.5 litres/min
ZL004 22mm female thread 3.5 litres/min
ZL005 24mm male thread 3.5 litres/min
Shower hand setCode Type Flow rates fromZL006 Fixed pattern 4.0 litres/min
Shower hand setCode Type Flow rates fromZL007 4 mode adjustable 4.0 litres/min
60
55
50
45
40
35
30
250.0 1.0 2.0 3.0 4.0 5.0 6.0
Flow Rate (l/min)
Delivered
Temp(˚C)w
ith12˚Cam
bient
ES3ES4ES6ILX006ILX009
Single Phase
Three Phase
ILX012DEX/DBX (18kW)DEX/DBX (21kW)DEX/DBX (24kW)DEX/DBX (27kW)
Standard reachbasin/sink tap
TF003—Mains poweredTF004—Battery powered
130
145 Long reachbasin/sink tapTF001—Mains poweredTF002—Battery powered
Hotwater
Hotwater
80 81
Product Product Capacity Thermal Loss DimensionsCode litres kWh/day H x W x D
(mm)
Oversink
AP3/05/OB Zip Aquapoint III 5 0.35 376 x 256 x 260
AP3/10/OB Zip Aquapoint III 10 0.48 480 x 350 x 265
AP3/15/OB Zip Aquapoint III 15 0.62 480 x 350 x 310
Undersink
AP3/05 Zip Aquapoint III 5 0.35 376 x 256 x 260
AP3/10 Zip Aquapoint III 10 0.48 480 x 350 x 265
AP3/15 Zip Aquapoint III 15 0.62 480 x 350 x 310
Zip Aquapoint III®Unvented water heaterSingle or multiple outlets5, 10, 15 litreUndersink and Oversink
Safety featuresManually resettable overtemperature safety cutout.
Expansion relief valve (supplied)set at 6 bar.
Sacrificial anode for addedprotection for element and tankin aggressive water conditions,requiring regular inspection andreplacement when necessary.
InstallationSeparate models available foroversink and undersinkinstallation.
All models can be wall mounted.
Undersink units can be installedunsupported on the floor ifrequired.
All models can supply one outletor multiple outlets, subject tocapacity, without the need forspecial taps.
PlumbingWater connections 1⁄2” BSPExpansion relief valve (supplied)set at 6 bar. Should be installedonly by a suitably experiencedinstaller of unvented electricstorage water heaters.
Oversink and undersink modelsnot interchangeable.
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.
Supplied with 1 metre ofpre-wired cable.
Features and benefits
Glass lined steel inner containertested to 12 bar.
Sacrificial anode for protectionagainst corrosion.
Element ‘ON’ neon indicator.
External temperature controlwith frost protection.
Oversink and Undersinkversions available.5, 10 & 15 litre.
Capacities5 litre, 10 litre, 15 litre.
Rating2.0 kW @ 230V.
Heating elementEmbedded rod type.
ThermostatCapillary type adjustable from7ºC to 75ºC.
Water tank1.8 mm glass enamelled steeltested to 12 bar.
CaseHigh impact resistant white plastic.
InsulationHigh density, CFC-freepolyurethane foam.
IP rating24.
ApprovalsWRAS, CE endorsed.
WarrantyOne-year on site parts andlabour. For full details of theZip Warranty Scheme visit:www.zipheaters.co.uk/warranty
Zip Service/Technical Support 0800 077 8302Customer Service 0845 602 4533
Hotwater
Hotwater
82 83
Zip Varipoint II®Unvented water heaterSingle or multiple outlets10, 15 litreUndersink & oversink
Safety featuresManually resettable overtemperature safety cut-out.
Pressure and temperature reliefvalve supplied.
Expansion relief valve supplied,set at 6 bar.
Frost protection setting.
InstallationSeparate models available foroversink and undersinkinstallation.
All models can supply one ormore outlets.
No special taps required.
Undersink is floor standing or wallhung on bracket (supplied).
Oversink is wall hung, on bracket(supplied).
PlumbingWater connections 1⁄2” BSP.
Pressure and temperature reliefvalve (supplied) should be fittedto heater.
Pressure relief valve (supplied)to be fitted in cold water supply.
Should be installed only by asuitably experienced installer ofunvented electric storage waterheaters.
Oversink and undersink modelsnot interchangeable.
ElectricalTo be wired to a double poleswitched fused spur with aminimum break capacity of 13amps. Installation must complywith current IEE regulations.
Supplied with 1 metre ofpre-wired cable.
Features and benefits
Heavy gauge copper innercontainer tested to 16 bar.
Five year warranty on innercontainer, two years on controls.
Does not require an anode orregular inspection.
Supplied with temperature andpressure relief valve.
Oversink and undersinkversions available.10 litre or 15 litre.
External temperature control withfrost protection setting.
Element ‘ON’ neon indicator.
Supplied complete with wallmounting bracket.
Capacities10 litre, 15 litre.
Rating2.2 kW @ 230V.
Heating elementEmbedded rod type.
ThermostatCapillary type adjustable upto 75ºC.
Water tankHeavy gauge copper, pressuretested to 16 bar.
CaseHigh impact resistant white plastic.
InsulationHigh density, CFC-freepolyurethane foam.
IP rating24.
ApprovalsWRAS, CE endorsed.
WarrantyFive year on site parts and labourwarranty on inner container, twoyears on controls. For full detailsof the Zip Warranty Scheme visit:www.zipheaters.co.uk/warranty
Product Product Capacity Thermal Loss DimensionsCode litres kWh/day H x W x D
(mm)
Oversink
VP103 Zip Varipoint II 10 0.36 452 x 300 x 285
VP153 Zip Varipoint II 15 0.50 452 x 300 x 285
Undersink
VP103UB Zip Varipoint II 10 0.41 452 x 300 x 285
VP153UB Zip Varipoint II 15 0.58 452 x 300 x 285
Zip Service/Technical Support 0800 077 8302Customer Service 0845 602 4533
HotWater
85
Zip AccessoriesUnvented water heating5, 10 & 15 litre capacity
Minimum length of pipe–Length ‘X’
Capacity 15mm pipe 22mm pipe5 litres 1.37m 0.6m10 litres 2.7m 1.2m15 litres 4.2m 1.8m
Diagram BInlet pressure less than 4 bar but expanded hot water cannot be ac-commodated in the pipe work. (Install AQ2 expansion vessel and checkvalve).
Diagram CInlet pressure greater than 4 bar. (Install AQ2 expansion vessel and checkvalve with AQ3 pressure reducer).
Diagram DTemperature and pressure relief valve AQ1.
Aquapointor Vari-point
Aquapointor Vari-point
Aquapointor Vari-point
Aquapoint Varipoint
Diagram AInlet pressure less than 4 bar and expanded hot water can be accommodatedin the pipe work.
Zip Service/Technical Support 0800 077 8302
AQ2
Expansionvessel andcheck valve(3.5 bar)
AQ3
Combined pres-sure reducer (setat 3.5 bar) andline strainer
AQ1
Pressure and temperature relief valve (7 bar/90ºC).
Provides additional levels of safety when fitted to waterheater as shown in Diagram D.
Note: Varipoint supplied complete with AQ1.
Order AQ1 separately for use with Aquapoint.
AQ4 TMV2
Thermostatic blending valve complete with 2 check valves.(Set temp range 30º to 65ºC).
AQ4S TMV3
NHS Approved Thermostatic Blending Valve complete with2 check valves. (Set temp range 30º to 50ºC).
These blending valves provide over temperature protectionand are also ideal for extending system capacity.
HotWater Zip Accessories
Unvented water heating5, 10 & 15 litre capacity
Varipoint & AquapointUnvented Accessory Selection
Additional Accessories
84
YESNO
NO
NO
NO
Will the pipework accommodate expanded water without hot water entering any supplypipe connected to a cold water draw-off? (See diagram A opposite and note minimumpipe lengths). If expansion in the cold water main is restricted, e.g. by a valve or meter,
an expansion vessel and other relevant accessories MUST be fitted.
Is reverse flow prevented, e.g. by a valve or meter?
Is the mains pressure 4.0 bar or less?
NOT REQUIREDFit AQ2 + AQ3
Is the mains pressure 4.0 bar or less?
Fit AQ2Fit AQ2 + AQ3
Customer Service 0845 602 4533
AQ4
AQ1
YES
YES YES
Hotwater
86Hotwater
87Customer Service 0845 602 4533
Zip Aquapoint III®Unvented water heaterMultiple outlet 30, 50, 80 & 100 litre
ApprovalsWRAS, CE endorsed.
Safety featuresManually resettable safety cutout.
Heater protected against freezingwhile power switched on.
Factory fitted pressure andtemperature relief valve designedto operate at 7 bar and 90ºC.
Expansion relief valve set tooperate at 6 bar.
InstallationWall mounted. Ensure wall isstrong enough to support waterheater when full.
Must be installed by a qualifiedinstaller in accordance with LocalRegulations. England and Wales –Building Regulations G3.Scotland – Technical Standards P3.N. Ireland – Building Regulations P5.
PlumbingWater connections 1⁄2” BSP.
Minimum recommended waterpressure 1 bar.
Unit supplied with full installationkit comprising: expansion vessel,pressure reducing valve, balancedtake off valve, expansion reliefvalve (6 bar), line strainer, tundishand wall brackets.
Factory fitted P&T and expansionrelief valves require plumbing towaste in accordance with waterauthority bylaws.
Sacrificial anode for addedprotection for element and innercontainer in aggressive w
Recommended