View
212
Download
0
Category
Preview:
Citation preview
Technical leaflet8413.1/11--10 BOAX
Centred disc butterfly valvewith AMRINGelastomer liner
for H.V.A.C. applications
PS 16 and 10 barManual and electric
actuation
Sizes 20 to 400 mm(3/4 to 14”)
Applications Heating, ventilation, air conditioning. Fuel, gas, compressed air.Working conditions Temperature range: the working temperature depends on
the media and the nature of the elastomer used:-- from --10° C up to + 130° C: E.P.D.M.--XV,-- from --10° C up to + 90° C: High content nitrile -- K.
Allowable pressure (PS):-- 16 bar: sizes 20 to 200 mm at ambient temperature,-- 10 bar: sizes 250 to 400 mm at ambient temperature.
Differential pressure: identical to ps. Vacuum service down to 0,2 absolute bar. Maximum fluid velocity under PS: 4 m/s.Design Median rib body (Type 2) with aligment holes allowing
downstream pipe dismantling under PS or dead--end service. Extended neck allowing insulation. Thermal isolating device facilitating the clamping of the
insulating jacket around the plate skirt. E.P.D.M. liner: an extra volume of rubber, located at the shaft
passage areas, provides by compression between the valvebody and the disc edge a perfect leak--tightness at the shaftpassages.
Spherical machined disc ensures perfect upstream/downstream sealing: zero leakage visible to the naked eye.
Face--to--face dimensions in accordance with:-- ISO 5752 series 20, EN 558--1series 20.
Mounting plate meeting the following standards:-- ISO 5211.
Flange connection standard: PN 6, 10 and 16.For sizes 20 to 300 mm, one body allows 3 connections.For sizes 350 and 400 mm, connection drillings are made tocustomer’s requirement.
97/23/EC (PED)
Marking in accordance with EN 19. Design in accordance with EN 593. This valve cannot be dismantled. The valves meet the safety requirements of the pressure
Equipments Directive 97/23/EC (PED) appendix 1 for fluidsof the groups 1 and 2.
External coating Polyurethane paint, 80 ← thickness, colour orange ref.
RAL 2002.Materials Body: JS 1030 ductile iron. Shaft: 13 % chromium stainless steel. Disc: JS 1030 ductile iron nickel coated. AMRING liner: -- E.P.D.M--XV,
-- High content nitrile -- K.
For the other parts, please refer to the parts list.Actuator selection Operation by ¼ padlockable handle (LP), in aluminium alloy,
locking in 13 intermediate positions; sizes 20 to 250 mm. Operation by manual gear reducer; sizes 20 to 400 mm. Operation by ¼ turn electric actuator fitted directly onto the
ISO mounting plate; sizes 20 to 400 mm.Data to be supplied when ordering BOAX series valve in accordance with leaflet 8413.1/11--10 Size. Working conditions:
-- nature of fluid,-- pressure,-- temperature.
Actuation.
BOAX
2
Construction
Sizes 20 to 200 mm
Sizes 20 and 25 Sizes 32 to 80 Sizes 100 to 150 Size 200
213
152
412
100
970
413
550
213
152
412
100
970
413
550
210
213
152
412
100
970
413
550
210
213
152
412
100
970
413
550
210
310.1
310.3
310.2
Item Designation Size Materials
100 Body 20 to 200 JS 1030 ductile iron
152 Thermal isolating device 20 to 200 Polyamid fiber glass filled
210 Shaft 32 to 200 13 % chromium stainless steel
213 Driving shaft 20 to 200 13 % chromium stainless steel
310.1 Plain bearing 200 PTFE filled on steel casing
310.2 Plain bearing 200 PTFE filled on steel casing
310.3 Plain bearing 200 PTFE filled on steel casing
412 O--ring 20 to 200 E.P.D.M.
413 Liner 20 to 200 E.P.D.M.--XV or high content nitrile--K
550 Disc 20 to 200 JS 1030 ductile iron nickel coated550 Disc 20 to 200 JS 1030 ductile iron nickel coated
970 Identification plate 20 to 200 Adhesive polyester coated
BOAX
3
Construction
Sizes 250 to 400 mm
412
100
152
900.1
310.2
213
550
310.3
310.1
210
413
900.2
916
970
152
100
412
900.1
310.2
213
550
310.3
310.4
310.1
413
210
900.2
916
970
412
100
152
900.1
310.2
213
550
310.3
310.1
210
413
900.2
916
970
Size 250 Size 300 Sizes 350 and 400
Item Designation Size Materials100 Body 250 to 400 JS 1030 ductile iron152 Thermal isolating device 250 to 400 Polyamid fiber glass steel210 Shaft 250 to 400 13 % chromium stainless steel213 Driving shaft 250 to 400 13 % chromium stainless steel310.1 Plain bearing 250 to 400 PTFE filled on steel casing310.2 Plain bearing 250 to 400 PTFE filled on steel casing310.3 Plain bearing 250 to 400 PTFE filled on steel casing310.4 Plain bearing 350 and 400 PTFE filled on steel casing412 O--ring 250 to 400 E.P.D.M.413 Liner 250 to 400 E.P.D.M.--XV or high content nitrile--K
550 Disc 250 to 400 JS 1030 ductile iron nickel coated550 Disc 250 to 400 JS 1030 ductile iron nickel coated900.1 Screw 250 to 400 Stainless steel900.2 Screw 250 to 400 Stainless steel916 Plug 250 to 400 Polyamid970 Identification plate 250 to 400 Adhesive polyester coated
BOAX
4
Valve without actuator
Overall dimensions (mm) and weights (kg)
d1d1 d1 d1
d1 d1 d1
h3
e2
e1
h4
l1
h1
h2
Sizes 20 to 65 Size 80 Size 100 Sizes 125 and 150
Size 200 Size 250 Size 300 Sizes 350 and 400
d1
ø d4
Flat end s machinedin Øz or s
SizeFace
toMounting
plate Flat shaft endSquare Disc WeightSize to
faceplate
ISO 5211Flat shaft end
q
shaft endDisc
clearance Weight
mm l1 d1 d4 h1 h2 N° h4 s øz h3 s h3 e1 e2 kg
20 27 76 101 38 9 12 14 -- -- 0,5
25 27 84 104 42 9 12 14 15 2 0,6
32 27 101 108 51 9 12 14 31 5 0,9
40 33 108 60 126 54 F04 29 9 12 18 32 4 1,2
50 43 118 131 60 9 12 18 33 4 1,5
65 46 132 157 67 9 12 24 55 11 2,2
80 46 138 163 89 9 12 24 71 17 2,8
100 52 15070
191 99F05 38
11 14 24 90 23 4,4
125 56 23470
205 112F05 38
11 14 24 119 35 5,6
150 56 26095
224 130F07 42
17 22 25 144 46 7,8
200 60 32295
252 161F07 42
17 22 25 196 69 11,9
250 68 394 133 275 197 F10 38 19 25 249 92 17,8
300 78 462 158 289,5 231 F12 28,5 22 29 297 111 32
350 78 538 183 338 269 F12 29 25 40 326 127 60
400 102 604 183 383 302 F14 29 36 50 370 140 80
BOAX
5
Valve with manual actuation
Overall dimensions (mm) and weight (kg)
ø d4
l2
h5
LP ¼ turn handle operation -- sizes 20 to 250 mm
h5
ø d2
ø d4
Manual gear reducer operation -- sizes 20 to 250 mm
A B D C
h5
Manual gear reducer operation -- sizes 300 to 400 mm
Ø E
Size LP ¼ turn handle operation
mm l2 h5 d4 Weight*20 153 1,025 156 1,132 160 1,440 165 178 60 1,750 183 2,065 209 2,780 215 3,3
100230
25370
5,1125 230 266 70 6,1150
330298
958,8
200 330 326 95 12,9250 460 374 133 20,0
* The indicated weights are those of the valve + the handle.
Size Manual gear reducer operation
mm Type d2 h5 d4 Weight*20 195 60 2,025 198 60 2,132 202 60 2,440 220 60 2,750 MA 12 140 225 60 3,065 251 60 3,780 257 60 4,3
100 285 70 5,9125 299 70 7,1150 355 95 10,8200 MA 25 225 383 95 14,9250
MA 25 225406 133 20,8
* The indicated weights are those of the valve + the actuator.
Size Manual gear reducer operation
mm Type A B C D Ø E h5 Weight*
300 MN 40 70 225 60 60 225 350 35,4
350MN 80 90 245 70 75 225
416 64,6
400MN 80 90 245 70 75 225
461 84,6
* The indicated weights are those of the valve + the actuator.
BOAX
6
Valve with electric actuation
Actuator selection
Single phase A. C. 230 V, 50 Hz
SizeACTELEC
Standard
mmACTELEC
operating time
20
25
32Z3 11 s
40Z3 11 s
50
65
80OA6 6 s
100OA6 6 s
125 OA8 6 s *
150 OA15 15 s *
200AS25 10 s *
250AS25 10 s *
300AS50 30 s *
350AS50 30 s *
400 BS100 60 s *
* For other operating time, please consult us.
3--phase A. C. 400 V, 50 Hz
SizeACTELEC
Standard
mmACTELEC
operating time
20
25
32
40OA6 6 s
50OA6 6 s
65
80
100
125 OA8 6 s *
150 OA15 15 s *
200AS25 10 s *
250AS25 10 s *
300AS50 30 s *
350AS50 30 s *
400 BS100 60 s *
* For other operating time, please consult us.
BOAX
7
Valve with electric actuation
Main electrical equipments
ACTELEC Z3 OA6 OA8 OA15 AS25 AS50 BS100
Opening and closinglimit switches Standard
Adjustable extremeposition mechanical stops Standard
Opening and closingtorque limit switches Standard
Heating resistance 6 W Standard
Electrical characteristics
ACTELECSingle phase A. C. 230 V, 50 Hz
ACTELECZ3 OA6 OA8 OA15 AS25 AS50 BS100
Nominal intensity (A) 0,7 0,6 1,2 0,6 1,8 1,2 1,2
Starting intensity (A) 0,9 0,9 1,7 0,9 2,5 1,7 1,7
Power (W) 27 30 60 30 100 60 60
ACTELEC3--phase A. C. 400 V, 50 Hz
ACTELECOA6 OA8 OA15 AS25 AS50 BS100
Nominal intensity (A) 0,3 0,6 0,3 0,8 0,3 0,6
Starting intensity (A) 0,5 1,1 0,5 1,6 0,8 1,1
Power (W) 30 100 30 150 60 100
Rated current:-- single phase A. C. 230 V, 50 Hz: all types,-- 3--phase A. C. 400 V, 50 Hz: all types except Z3.
Intermittent duty:-- S4--20 % for Z3,-- S4--30 % for OA6, OA8, OA15, AS25, AS50 and
BS100.
Protection: IP 67.
Manual emergency control by handwheel.
Motor protection by thermoswitch.
Working temperature: from --20° C to + 70° C.
On request:-- OA8, AS25, AS50 and BS100 for regulating service,-- potentiometer,-- extra adjustable limit switches,-- position transmitter.
Please consult us.
BOAX
8
Valve with eletric actuation
Overall dimensions (mm) and weight (kg)
d2
b1b2
h2
l3 l2
2 PE 16
d3
2 PE 16
b2
d2
b1
d3
l3 l2
h2
l3 l2
2 PE 16
l1
b1b2
d3
h2
h1
Z3
OA6, OA8 and OA15
AS25, AS50 and BS100
BOAX
9
Valve with electric actuation
Overall dimensions (mm) and weight (kg)
Si Weight*Sizemm
ACTELECWeight*
mml1 h1 h2 b1 b2 d2 d3 l2 l3 kg
20 27 101 346 5,525 27 104 349 5,632
Z327 108 353
59 134 60 90 935,9
40Z3
33 126 37159 134 -- 60 90 93
6,250 43 131 376 6,565 46 157 402 7,720 27 101 317 6,225 27 104 320 6,332 27 108 324 6,640
OA633 126 342
200 90 106 60 145 656,9
50OA6
43 131 347200 90 106 60 145 65
7,265 46 157 373 7,980 46 163 379 8,5
100 52 191 389 10,1125 OA8 56 205 420 200 90 106 60 145 65 12,4
150 OA15 56 224 439 260 112 106 100 145 65 15,3
200AS25
60 252 429312 187 139 165 226 89
29,9250
AS2568 275 452
312 187 139 165 226 8935,8
300AS50
78 289,5 467340 187 139 250 226 89
50,0350
AS5078 338 515
340 187 139 250 226 8978,0
400 BS100 102 383 550 392 187 139 250 284 134 100,0
* The indicated weights are those of the valve + the actuator.
BOAX
10
Valve with electric actuation
Low differential pressure application
Selection chart
SizeACTELEC
Operating
mmACTELEC
time
20 to 125 B 15 80 s
150 and 200 B 35 180 s
Main characteristics
-- Single phase A. C.: 230 V 50 Hz.-- Power:
-- ACTELEC B 15 : 8 W,-- ACTELEC B 35 : 10 W.
-- Protection: IP 54,-- Working temperature range: from --20° C to + 50° C,-- Connection by cable (length: 0,90 m).
On request
-- Limits switches.
h1
h2
l3
l1
l2b1b2
Overall dimensions (mm) and weight (kg)
Si W i ht*Sizemm
ACTELEC Weight*kgmm
l1 h1 h2 b1 b2 l2 l3kg
20 27 101 196 2,125 27 104 199 2,232 27 108 203 2,540 33 126 221 2,850 B 15 43 131 226 166 30 62 62 3,165 46 157 252 3,880 46 163 258 4,4
100 52 191 291 6,0125 56 205 305 7,2150
B 3556 224 339
184 30 62 629,8
200B 35
60 252 367184 30 62 62
13,9
* The indicated weights are those of the valve + the actuator.
BOAX
11
Hydraulic characteristics
Size
mm
Flow cœfficientin full open position
m3/h/bar1/2
Pressure dropcœfficient
Zeta
Size
mm
Flow cœfficientin full open position
m3/h/bar1/2
Pressure dropcœfficient
Zeta20 8 4 150 2200 0,1725 30 0,7 200 4475 0,1332 35 1,4 250 9900 0,0640 40 2,55 300 11000 0,1150 90 1,23 350 15900 0,0965 200 0,71 400 20000 0,1080 390 0,43
100 590 0,46125 1390 0,20
Assembly
The BOAX valve is fitted between pipe flanges by tie--rods, without gasket.It is bi--directional and can be mounted in all positions.
Downstream pipe dismantling End of line
Use as end of line and downstream dismantling at ambient temperature of standard range of valves:
NB: A valve fitted at the end of apipe with a blind flange downstreamis not to be considered as an end ofpipe service.
Gas or liquids* LiquidsHazardous Non hazardous Hazardous Non hazardous
All sizes: not authorized
Sizes 200:αPS = 10 bar max.
Sizes 250 to 400 mm:αPS = 7 bar max.
Sizes 200:αPS = 10 bar max.
Sizes 250 to 400 mm:αPS = 7 bar max.
Sizes 200:αPS = 12 bar max.
Sizes 250 to 400 mm:αPS = 7 bar max.
αPS: Differential pressure*Liquids whose vapour pressure at the maximum allowable temperature is greater than 0,5 bar above normal atmospheric pressure(1013 mbar).
Heat insulation
The extended neck and the thermal isolating device allowfor easy clamping of an insulating jacket.
Pipe isolating jacket Jacket two parts
Thermal isolatingdevice
Clampings rings
BOAX
KSB -- AMRIZ.I. de Gagnaire FonsècheF--24490 La Roche Chalais
Phone: +33 5 53 92 44 00T/ Fax: +33 5 53 92 44 01www.ksb--valves.com
Butterfly valves,actuators and systems
28.0
1.02
Thi
sle
afle
tis
notc
ontra
ctua
lan
dm
aybe
amen
ded
with
outn
otic
e.84
13.1
/11-
-10
Recommended