View
218
Download
1
Category
Preview:
Citation preview
Representing integers
We typically think in terms of decimal (base 10) numbers.Why?A decimal (or base 10) number consists of a
sequence of decimal digits (0,1,…,9).192010 = 1x103 + 9x102 + 2x101 + 0x100
Least significant digit
Most significant digit
Representing integers
All numbers within the computer are stored as binary numbers.Why?A binary (or base 2) number consists of a
sequence of bits (0,1).1100112 =1x25+1x24+0x23+0x22+1x21+1x20
Where does the word “bit” come from?
Least significant bitMost significant bit
Representing integers
Typical integer sizes:unsigned char is 8 bitsunsigned short is 16 bitsunsigned int is 32 bits
1100112
• is 001100112 when stored in an unsigned char• is 00000000001100112 when stored in an unsigned short• is 000000000000000000000000001100112 when stored in
an unsigned int
• We know that 192010 is the same as 0192010 or 00000000192010.
Bitwise operators (on integers)
& bitwise and| bitwise or~ bitwise not (1’s complement)^ bitwise xor (exclusive or)- negation (2’s complement)
Let’s substitute 1 for T and 0 for F.
Bitwise operators (on integers)
& bitwise and
110011 (really 00110011 in an 8-bit byte)
& 001111 (really 00001111)
------------
000011 (really 00000011)
Bitwise operators (on integers)
| bitwise or
110011 (really 00110011 in an 8-bit byte)
| 001111 (really 00001111)
------------
111111 (really 00111111)
Bitwise operators (on integers)
~ bitwise not (1’s complement)
If x is 110011 (really 00110011 in an 8-bit byte)
then ~x is 11001100.
Bitwise operators (on integers)
- negation (2’s complement)algorithm:
1. Perform 1’s complement (~).
2. Add 1.
If x is 110011 (really 00110011 in an 8-bit byte)
then
~x is 11001100
-x is 11001101(after add 1 to previous)
Bitwise operators (on integers)
^ bitwise xor
110011 (really 00110011 in an 8-bit byte)
^ 001111 (really 00001111)
------------
111100 (really 00111100)
Other bitwise operators
<< shift bits to the left1 shift to the left is the same as multiplying by
2.Examples
10 << 1 is 207 << 1 is 147 << 3 is 56 (same as multiplying by 23)
Other bitwise operators
>> shift bits to the right1 shift to the right is the same as integer
division by 2.Examples
10 >> 1 is 527 >> 3 is 3
Bits as binary flags.
An int is 32 bits so we can number each student in the class from 0..31. If the bit for a particular student is 1, then that indicates that they took a quiz.
First, let’s define the students.#define S0 (1<<0)#define S1 (1<<1)#define S2 (1<<2)#define S3 (1<<3)#define S4 (1<<4) . . .#define S31 (1<<31)
Bits as binary flags.
Now let’s define a quiz.unsigned int quiz1 = 0;
How can we indicate that students 0, 5, and 9 took quiz 1?
Bits as binary flags.
Now let’s define a quiz.unsigned int quiz1 = 0;
How can we indicate that students 0, 5, and 9 took quiz 1?
quiz1 = (s0 | s5 | s9);
Bits as binary flags.
Now here comes student 12. He takes the quiz on a subsequent day because he was ill.
How do we update quiz1 to indicate that student 12 also took the quiz?
Bits as binary flags.
Now here comes student 12. He takes the quiz on a subsequent day because he was ill.
How do we update quiz1 to indicate that student 12 also took the quiz?
quiz1 |= s12;
Bits as binary flags.
I’d like to write a message that indicates whether or not student 25 took the exam?
How can I do that?
Bits as binary flags.
I’d like to write a message that indicates whether or not student 25 took the exam?
How can I do that?
if ((quiz1&s25)!=0) puts(“taken”);else puts(“skipped”);
if ((quiz1&s25)==s25) puts(“taken”);else puts(“skipped”);
if (quiz1&s25) puts(“taken”);else puts(“skipped”);
Bits as binary flags.
Did both students 22 and 25 take the exam?
if ((quiz1&(s22|s25)) == (s22|s25) )puts(“taken”);
elseputs(“skipped”);
if ((quiz1&s22)!=0 && (quiz1&s25)!=0) …
Bits as binary flags.
Did everyone except for student 25 take the exam?
if ( (quiz1&(~s25)) == (~s25) ) puts(“yes”);
else puts(“no”);
Bits as binary flags.
I thought student 25 took the exam but I was mistaken. How can I rectify my mistake?
Bits as binary flags.
I thought student 25 took the exam but I was mistaken. How can I rectify my mistake?
quiz1 = quiz1 & (~s25);
quiz1 &= ~s25;
Bits as binary flags.
Finally, I’d like to print out a list of all of the students that took exam 1.
Bits as binary flags.
Finally, I’d like to print out a list of all of the students that took exam 1.
int which = 1;for (int i=0; i<32; i++) {
?which <<= 1;
}
Bits as binary flags.
I’d like to print out a list of all of the students that took exam 1.
int which = 1;for (int i=0; i<32; i++) {
if (quiz1&which)printf( “student %d took the quiz. \n”, i );
which <<= 1;}
Bits as binary flags.
Say I also have quiz1 and quiz2. I’d like a list of all of the students that took quiz1 or quiz2 but not both.
Recommended