Becemm Guide

1. Install .NET Framework 2.0

2. Install Becemm_GA514P1 (1.Select Language)

2. Install Becemm_GA514P1 (2)

2. Install Becemm_GA514P1 (3.Next)

2. Install Becemm_GA514P1 (4.Install)

2. Install Becemm_GA514P1 (5)

2. Install Becemm_GA514P1 (6-Plugin Card)

2. Install Becemm_GA514P1 (7.Card Found Detect)

2. Install Becemm_GA514P1 (8.Continue Anyway)

2. Install Becemm_GA514P1 (9.Finish)

2. Install Becemm_GA514P1 (Basic View)

3.Configuration (AdvanceInput Code=admin2)

admin2

4.Profile Setting (1-PKM=PKMv2_EAP)

4.Profile Setting (2-Inner EAP Method=CHAP)

4.Profile Setting (3-Scan SettingBandwidth=10MHZ,fr=all fr)

4.Profile Setting (4-User ID, User PW, Outer Identitysave setting)

5.Tools Setting (1-Config Edit)

5.Tools Setting (2-FileOpen)

5.Tools Setting (3-Select macxvi.cfg)

5.Tools Setting (4-Parameter Setting-Radio Parameter=22 for 2.3GHz)

5.Tools Setting (5-Save)

5.Tools Setting (6-OK)

6.Scan (1-Scan Base Station)

5.Scan (2-Refresh)

5.Scan (3-Choose fr, double click on selected fr)

5.Scan (4-NE Success)

6.Device View

7.Network View

8.Statistic View

9.Using Kannon to View