Ball Mill Presentation

Ball Mill

LOGO

Group No. 3

Contents

Introduction

Types and Process

Principle of workPrinciple of work

Description of Ball mill

Design and Cost

Introduction

�It is a device used for size reduction, It can reduce sizes up to a tenth of a micron.

�Cylindrical in shape.�Rotates on a horizontal axis.

Ball MillGroup No.3

�Rotates on a horizontal axis.�Partially filled with the material to be ground and the grinding medium.

Types and Process

Types and process

Ball MillGroup No.3

There are two Processes

1. Wet Process2. Dry Process

There are two Types

1. Continuous2. Batch

Principle of ball mill

�The rpm of mill

�The difference in speed between balls

Ball MillGroup No.3

BB

AAInlet

Drive

Description

Ball MillGroup No.3

DD

CC

Drive

Outlet

Mill Internals

A. Inlet

�INLET TUBE

mostly for wet mills

� INLET CHUTE � INLET CHUTE

with fresh air flap for mill

ventilation

�INLET SCREW

for problematic feed materials

Ball MillGroup No.3

Types of inlet

1- TUBE 2- CHUTE B.3- SCREW

Ball MillGroup No.3

B. Drivers

1- CENTRAL 2- GEAR RIM/PINION

Ball MillGroup No.3

Types of drives

�CENTRAL DRIVE

�GEAR RIM / PINION�GEAR RIM / PINION

with one pinion or double pinion

Ball MillGroup No.3

C. Outlet

�OVERFLOW MILLS WITH/WITHOUT

SCREEN CAGE

for wet mills

�DISCHARGE DIAPHRAGM

for wet and dry mill

�CENTRAL DISCHARGE

for dry mills

Ball MillGroup No.3

Types of Outlet

1- OVERFLOW 2- DISCHARGE DIAP. 3- CENTRAL

Ball MillGroup No.3

D. Mill Internals

�STEEL LINING

for wet and dry mills

� RUBBER LINING� RUBBER LINING

for wet mills

� CERAMIC LINING

for iron-free grinding

Ball MillGroup No.3

Types of Mill Internals

STEEL RUBBER CERAMIC

Ball MillGroup No.3

Fastening systems

Bolted version

Ball MillGroup No.3

Bolted version

Semi-bolted version

Boltless version

ERECTION of COMPACT LINING

Design

IMPORTANT DATA TO DESIGN A Ball IMPORTANT DATA TO DESIGN A Ball IMPORTANT DATA TO DESIGN A Ball IMPORTANT DATA TO DESIGN A Ball

MILLMILLMILLMILL

Feed materialFeed materialFeed materialFeed material:Temperature [°C]:

Grain size [80% < x µm]:

EnvironmentEnvironmentEnvironmentEnvironment:

Altitude [m a.s.l.]Ambient temperature [°C]

Ball MillGroup No.3

Grain size [80% < x µm]:Work Index acc. Bond [kWh/t]:

Feed quantity [kg/h]:

Ambient temperature [°C]

ProductProductProductProduct:

max. temperature [°C]:Grain size [80% < x µm]:

ProcessProcessProcessProcess:

Dry / wet grindingOpen / closed circuitGrinding media

Calculation

� Feed capacity → Mill dimensions

� Filling ratio (30-45%), Mill dimensions → Bulk volume of the balls

� ball size : D2 = k * Dp

(where k ranges from 0.9 to 1.4)(where k ranges from 0.9 to 1.4)

� Speed of the shell

Ncritical = (30*f)/√(R-r), where f =0.65-0.75

� Mass of balls = Bulk volume * Bulk density

Ball MillGroup No.3

Cost

Cost Ball mills, Ball charge are $315 S/ton

Ball MillGroup No.3

Cost Ball mills dry grinding

Ball MillGroup No.3

Cost Ball mills for wet grinding

Ball MillGroup No.3

To get the price of the ball mill for 2007

�Cost 2007

=(Cost 1990)*(Cost index 2007)/(cost index 1990)

Cost index 2007=533.1Cost index 2007=533.1

Cost index 1990=357.6

Ball MillGroup No.3

LOGO