BALL & TUBE HAND RAILING

TRA

FFIC

& P

AR

KIN

G

www.pws.com.au14

• Meets Australian standard AS1657 when installed correctly • Recommended maximum stanchion spacing of 2.0m for this style • Galvanised for maximum corrosion protection • System is available with a large variety of components• Custom made gates for pedestrians and vehicles available • Ask about our installation service

Code Prefabricated RailsBTR1/B 1m rail, bolt downBTR2/B 2m rail, bolt downBTR3/B 3m rail, bolt downBTR4/B 4m rail, bolt downBTR1/I 1m rail, core in-groundBTR2/I 2m rail, core in-groundBTR3/I 3m rail, core in-groundBTR4/I 4m rail, core in-ground

Part No. StyleCode DescriptionBTIP/B Bolt down, mid postBTEP/B Bolt down, end postBTCP/B Bolt down, corner postBTIP/I Core in-ground mid postBTEP/I Core in-ground end postBTCP/I Core in-ground, corner postBTTR Top rail 32mm NBx6.5m railBTMR Mid rail 25mm NBx6.5m railBTHCB Horizontal closure bend

SpecificationsMaterial Mild steelFinish Galvanised SteelTube Wall 3.2mm thicknessSpacing Max 2m post centresBase Plate 75 x 145 x 6mm

BALL AND TUBE HANDRAILBALL & TUBE HAND RAILING

BTIP/BBolt down

middle post

BTEP/BBolt down end post

BTIP/IIn-ground

middle post

BTEP/IIn-ground end post

BTCP/IIn-ground

corner post

BTHCBEnd

terminatorAvailable plain galvanised or galvanised and powdercoated in bolt down or In-ground styles.

Send your sketches and we will design & quote for you

sales@pws.com.au

Book 1.indb 14 21/09/2017 12:23:09 PM