Azimuth Adjustment Tool

Azimuth Adjustment Tool 738 440

936.

1533

/d

S

ubje

ct t

o al

tera

tion.

Elevationcompensation

Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth adjustment tool.

Instruction:

– Use a map to work out the angle between the designed antenna azimuth and target (church, building, mountain peak).

– Set this angle on the scale of the adjustment tool.

– Place the adjustment tool onto the antenna and tighten the clamping device.

– Use the telescope to aim at the target object, if necessary, use elevation compensation.

– Then rotate the antenna until the target object appears in the telescope.

* Observe the position of the stopper when fitting the azimuth adjustment tool.

Target object

Clamping device

Scale

Panel

Move the stopper to central position*

Target object

This tool is suitable to all types of Eurocell Panels

• Panels• A-Panels• C-Panels• F-Panels• X-Pol F-Panels

F-Panel

A-Panel

F-Panel

X-Pol-F-Panel X-Pol-F-Panel

F-Panel

equivalent for

F-Panel 33°

A-Panel

F-Panel

F-Panel

262

199

155

equivalent for

page 1 of 1 738 440

KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany . Telephone +49 8031 1 84-0 . Fax +49 8031 1 84-9 73

Internet: http://www.kathrein.de