Automatic Prism/Polygon measurement system · 2019-04-10 · Results set up screen Ultra...

The Taylor Hobson prism checker measures a range of optical prisms, polygons, wedges and

angle gauges from as little as 2 mm2 in size

High stability angle measurement and testing of optical prisms, polygons, wedges and angle gauges.

Results set up screen Clear, icon driven programming softwareUltra autocollimator screen

In order to be used successfully in most applications, prisms must be manufactured with very strict tolerances and accuracies. Most high precision prisms tend to be made in small batches, each batch varying in shape, size, and number of surfaces.

The Taylor Hobson automatic prism/polygon measurement system offers high stability angle measurement and testing of optical prisms, polygons, wedges and angle gauges. The reliability and accuracy of this measurement system is down to three key components:

1. The Taylor Hobson digital Ultra Autocollimator is respected throughout industry for its high accuracy and stability, using the latest digital technology to produce a 2 axis, high accuracy (0.2 sec) stable instrument over a wide range (1800 seconds).

2. The Aerotech rotary stage gives precision positioning and movement to less than 1 second.

3. Dedicated software allows programmes to be written, saved and recalled using a simple, step-by-step process and the results produced in a detailed report format, giving all angular X and Y results, ready for visual analysis or export in .csv format for further calculations.

The accuracy of the setup is further improved by using an error separation technique on the table.

• The uncertainty of reading on any measured face in the X axis is a maximum of ±0.5 arc sec.

• The uncertainty of reading on any measured face in the Y axis is a maximum of ±1 arc sec (pyramid error).

www.taylor-hobson.com

Automatic Prism/Polygon measurement system

Checking a polygonPolygons used for checking indexing tables and heads are typically 8, 9 or 12 sided although they can be supplied with as many as 72 faces. Since polygons are not perfectly regular a calibration chart is supplied to detail the deviations.

The Taylor Hobson system offers automatic polygon measurement.

The first polygon face (zero face) is aligned to the autocollimator and set to zero along with the rotary table. The table is then rotated until its readout matches the nominal angle of the polygon (30° increments for a 12 sided polygon). Each face should align with the autocollimator and if perfect the autocollimator reading should read zero.

This application note demonstrates just one of the applications for the Taylor Hobson electro-optical metrology range.

Contact Spectrum Metrology to discuss your own measurement requirements.

Spectrum Metrology Ltd. Unit 8 Ireton Avenue, Leicester, LE4 9EU

Tel: +44 (0)116 276 6262

Email: sales@spectrum-metrology.co.uk

Web: www.spectrum-metrology.co.uk

Taylor Hobson’s AutocollimatorOur digital autocollimator range is also ideal for setting and checking optical manufacturing machines:

• Squareness of diamond turning machines

• High accuracy straightness of wafer machines

• Indexing heads

Taylor Hobson UK Tel: +44 (0)116 276 3771taylor-hobson.sales@ametek.com

Taylor Hobson FranceTel: +33 130 68 89 30taylor-hobson.france@ametek.com

Taylor Hobson Germany

Tel: +49 6150 543 0taylor-hobson.germany@ametek.com

Taylor Hobson ItalyTel: +39 02 946 93401 taylor-hobson.italy@ametek.com

Taylor Hobson IndiaTel: +91 80 6782 3346taylor-hobson.india@ametek.com

Taylor Hobson China taylor-hobson-china.sales@ametek.com

Shanghai Office Tel: +86 21 5868 5111-110

Beijing Office Tel: +86 10 8526 2111

Chengdu Office Tel: +86 28 8675 8111

Guangzhou Office Tel: +86 20 8363 4768

Taylor Hobson Japan

Tel: +81 34400 2400taylor-hobson.japan@ametek.com

Taylor Hobson Korea

Tel: +82 31 888 5255 taylor-hobson.korea@ametek.com

Taylor Hobson Singapore

Tel: +65 6484 2388 Ext 120taylor-hobson.singapore@ametek.com

Taylor Hobson Thailand

Tel: +66 2 0127500 Ext 505taylor-hobson.thailand@ametek.com

Taylor Hobson Taiwan

Tel: +886 3 575 0099 Ext 301taylor-hobson.taiwan@ametek.com

Taylor Hobson MexicoTel: +52 442 426 4480 taylor-hobson.mexico@ametek.com

Taylor Hobson USA

Tel: +1 630 621 3099 taylor-hobson.usa@ametek.com

Automatic Prism/Polygon measurement system · 2019-04-10 · Results set up screen Ultra...

Documents

Evaluation of a CCD-based high resolution autocollimator ...isaacro/research/Lee_Teng_presentation.pdf · Evaluation of a CCD-based high resolution autocollimator for use as a slope

WARM UP!!! polygon not a polygon A polygon is a plane figure. A polygon is a closed region. A polygon is formed by three or more line segments as its

PROCEEDINGS OF SPIE - opt-e.com...autocollimator. Another step further from the NOM is the Nano-surface profiling (NSP) 3 instrument, that also uses the Elcomat autocollimator. The

sneakers in space · polygon into screen space, then mapped the transformed and projected vertices to the nearest screen coordinates and filled the polygon. Armed with code that imple-

Polygon Constructions

Autocollimator · Autocollimator Reflections When "perfect" collimation is "close at hand", 4 center-spot reflections can be seen in the INFINITYTM autocollimator and are the result

Autocollimators & Accessories teleszkopok, Autocollimator... · Axis Autocollimator is a highly versatile instrument offering high accuracy and stability over a range of applications

Computer Graphics Prof. Sukhendu Das Dept. of Computer ... · polygon as the concept is calledLet us see . a simple example of a polygon on a raster frame buffer or on a screen and

Lab6 Autocollimator Procedure

Thursday, November 4, 2010 - GIS Courses · 2015. 6. 22. · Attributes of BlobUnion Shape ' Blob-I Blob2 O Polygon I Polygon 2 Polygon 3 Polygon 4 Polygon 5 Polygon S Polygon Record:

Tutorials - TradeIndiaimg.tradeindia.com/fm/148350/tutorials.pdfTutorials 1. Autocollimator General An autocollimator is a Precise Optical Instrument for measurement of small angle

Nikon Measuring Instruments User Case Study – 6 · angular measurement The dark viewfield Autocollimator 6D— sister machine to the Autocollimator 6B Measuring the radius of curvature

6.1 What is a Polygon? Regular Polygon- · PDF file6.1 What is a Polygon? Regular Polygon-Polygon Formulas: ... Two pairs of consecutive congruent sides that are not congruent to each

Electronic Autocollimators for Precise Angle Measurement · Autocollimator The TriAngle ® electronic autocollimator is the standard and most universal instrument of the TriAngle

3.3 Polygon filling - faculty.jacobs-university.de · Polygon filling • Polygon filling treats the drawing of polygonal faces after being projected to the screen space. • The

Evaluation of a CCD-based high resolution autocollimator ... fileEvaluation of a CCD-based high resolution autocollimator for use as a slope sensor Rohan&Isaac& & Acknowledgements:&

with a Fellow of SPIE and Optical Society of America. He is Program/student_papers/Anchal_Agarwal...autocollimator. Fig.1 shows the principle of an autocollimator. The target resolution

Polygon drawing

Polygon Clipping - cse.iitd.ernet.inpkalra/csl781/polygon-clipping-filling.pdf · Clipping Polygon : Area primitive Polygon Clipping Simple Polygon: Planar set of ordered points No

Polygon Notes