View
1
Download
0
Category
Preview:
Citation preview
ATG PRESENTATION 2014 www.atg.cz
www.atgtesting.com
Created by Zbynek Zavadil
September 16, 2014
2
MOTTO: „ATG GOAL IS TO SOLVE CHALLENGES OF OUR CUSTOMERS IN SPECIAL
PROCESSES NDT, WELDING, COMPOSITES, SURFACE TREATMENT“ Vision To be a financially strong, technology company on the international scale in the area of industrial inspections, ensuring the quality of Customer’s products by implementing a complete solution of advanced technologies, products and services, based on the latest technical trends and development. Introduction, ATG activities, Basic Information
ATG IS ISO 9000:2008 CERTIFIED
ATG IS ISO 17043 ACCREDITED
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
INTRODUCTION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG (Advanced Technology Group) Ltd. is an engineering company active in special processes as NDT, welding, plant inspection, inspection, material and corrosion analysis
ATG Ltd. is a company with closed chain of products as follows:
Personnel qualification
Services in special processes (providing, consultancy, expertising ...)
Production for NDT
Independent inspection (Second and Third party inspection)
It means the company offers the complete technical solution for special processes as NDT, welding …
3
ATG MAIN ACTIVITIES
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 4
ATG activities are concentrated in the following areas in more details:
o NDT process – nondestructive testing
o Welding process
o Plant inspection – corrosion and material engineering
o Independent inspection (TPI - The third party inspection, second party inspection) + ASME Code, PED, ISO 3834, ISO 15607, etc.,
o Technical Personnel certification acc. to ISO 17024 (ATG CERT)
o Proficiency approval of NDT processes according to ISO 17043
o Design , production and system integration for NDT process
o Research and development in NDT, in material and corrosion analysis
BASIC INFORMATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 5
Company type Ltd.
Established 1992
Number of permanent employees 95
Number of university graduated 60
Number of Ph.D. 7
Number of NDT Level III qualified 28
Number of NDT Level III qualifications 83
Number of subsidiaries 9
ATG branches in Czech Republic Pilsen – western Bohemia Ostrava – northern Moravia
* These data are valid to February 15th 2014
ATG PERSONNEL GROWTH
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 6
Consolidated number of employees of the main ATG companies (ATG Prague, LA composite, ATG Slovakia) is 220 persons in 2014
ATG TURNOVER GROWTH
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 7
Turnover structure (approximately 10 milion USD)
o NDT HW production – 50% (long term projects cause a fluctuation)
o Independent inspection and NDT services – 25%
o Personnel qualification and certification – 25%
ATG INTERNAL STRUCTURE
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 8
Affilations ATG CEO Zbynek Zavadil Tomas Netusil
Daughters
SECRETARY ECONOMY
QUALITY ASSURANCE Josef Leger
SALES Ondrej Doubek
NDT SERVICES Vaclav Jandura
INSPECTION Jan Svub
PRODUCTION Zdenek Zdimera
RESEARCH & DEVELOPMENT
ATG CERT
Martin Ruzicka
NDT INSPECTION Petr Tichy
INSPECTION PLANT, TPI
DESIGN Jakub Horejsi
NDT TRAINING Vladimira Kohoutkova
INSPECTION TRAINING Michaela Markova
TECHNOLOGY Tereza Uhlova
PROFICIENCY APPROVAL (ISO 17043) Vaclav Jandura
AWS training Andrey Mlich
API training Josef Prokop
REALIZATION ASSEMBLY Vladislav Zak
EASA PART 145 process D1 Vaclav Jandura
SERVICE Tomas Toms
ATG EXTERNAL STRUCTURE / SUBSIDIARIES , AFFILATIONS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 9
ATG PRAGUE – SUBSIDIARY COMPANIES
CZECH REP
LA COMPOSITE PK-Q ATG – INSPEKTA
SLOVAK REPUBLIC ATG SLOVAKIA
RUSSIA ATG AFFILIATION MOSCOW ATG ACADEMY
UKRAINE ATG – ONIKO
TURKEY ATG TECHNOLOGIC
UAE ATG TCS
10
TECHNICAL PERSONNEL TRAINING
WITH ATG
Qualification training coverage,
Standard NDT methods, Specialized methods
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
11
ATG covers qualifications in these areas:
NDT - nondestructive testing
Welding coordination personnel and welders
Third Party Inspectors
Plant Inspectors
o API 510 – Pressure vessel
o API 570 – Process piping
o 653 – Storage tanks inspector
o Corrosion technologist/engineer/inspector
o Crane inspector ..
PERSONNEL TRAINING ~ OVERVIEW
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
All training/courses can be realized/performed in both ways:
o independent central certification acc. to ISO EN 17024 and by ATG CERT or authorized Certification Bodies
o or employer certification acc. to SNT-TC-1A too
All training/courses and exams can be performed in the customer facility or in ATG training centers
Schedule/Program of courses - in the employer certification system are scheduled acc. to …employer requirements
The implementation of these qualifications can be supported by Service Level III department activity - creation and implementation of employer legislative (procedures, instructions, audits, ..... etc.)
Support Level III for customer or independent audits
12
Qualification training covers all basic NDT methods in qualification levels 1,2 and 3
PERSONNEL TRAINING – NDT METHODS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
RT
UT
PT
MT ET
VT
LT
ATG offers more specialized methods or testing systems as follows
IRT – Infrared Thermography ST - Shearography TCS - Testing of Composite and Bonded
structures (Mechanical Impedance Method, Pitch-Catch, Resonance Method, Transmission UT, Tapping, IRT - Infrared Thermography, ...etc)
UTM - Ultrasonic Thickness Measurement
UT TOFD – Time of flight diffraction technique
UT PA – Phased array technique LT – Leakage testing RTI - Interpretation of Radiographs LA – Lubrication Analysis
13
CZECH REPUBLIC o PRAGUE
o PILSEN
o OSTRAVA
SLOVAK REPUBLIC o TRENCIN
o ZIAR NAD HRONOM
o KOSICE
RUSSIA o MOSCOW S7
o MOSCOW - NIKIMT
o SANKT PETERSBURG – NDT ACADEMY
o NOVOSIBIRSK S7
UKRAINE o KIEV – ATG ONIKO
ATG TRAINING CENTERS STRUCTURE
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
TURKEY o ISTANBUL – ATG TEKNOLOGIC
IRAQ o BAGHDAD – PERTC
UAE o ABU DHABI – ATG TCS
LATVIA o RIGA – INSPECTA LATVIJA
SERBIA o BEOGRAD - METALINSPEKT
ALGERIA o ALGER - YIT
In all countries is possible to organize qualification training and examinations at plants of the Customer
14
ATG CERTIFICATION
Independent Central Certification (TUV Nord, Reaktortest, Inspecta L, AWS, IIW CWS ANB),
Employer Certification, ATG CERT
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
PERSONNEL CERTIFICATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG can offer both qualification schemes together with contractual partners and partner Certification Bodies. The final decision of the Customer is dependent on its request:
Independent Central Certification (ISO 17024 and equivalent)
NDT process
ISO 9712 – ATG is an authorized training and examination center (authorized by TÜV Nord , Reaktortest, INSPECTA L)
ISO 11484 - authorized training and examination center (authorized by Reaktortest)
ATG CERT – ATG has own certification body acc. to ISO 17024 for NDT, welding, TPI and Plant Inspection personnel
ASME ANDE-01 is expected to be the basic certification scheme
15
PERSONNEL CERTIFICATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 16
WELDING process
AWS (American Welding Society) – CWI (Certified Welding Inspector) and CRI (Certified Radiograph Interpreter) contractual agent agency of AWS
CWS ANB –
o IWI (International Welding Inspectors) qualification
o IWE/T (International Welding Engineers, Technologists, Specialists) in cooperation of Czech Technical University
o Welders according to EN 287/ISO 9606 in cooperation of DOM 13
Welders according to ASME BPVC IX
Welders accrding to AWS D.17
PERSONNEL CERTIFICATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 17
Employer Certification
NDT process SNT-TC-1A – ATG provides qualification in the most common Employer systems especially for
pressure equipment production
EN 4179/NAS410 (aerospace) - ATG is approved as Outside Agency by National Aerospace NDT Board and can qualify companies working according to EASA Part 145 (MRO) and/or EASA Part 21
ISO 11484, EN 10 256 – ATG provides qualification system for steel products and tubes
Welding process Welders according to ASME BPVC IX
Welders accrding to AWS D.17
18
ATG CERT covers personnel certification in following processes:
NDT - nondestructive testing
Welding process - coordination personnel and welders
Third Party Inspection
Plant Inspection including
o Corrosion inspectors (API 510, 570, 653)
o Crane inspectors etc.
ATG CERT ~ PERSONNEL CERTIFICATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG Cert basic information:
from March 2011
independent central personnel certification acc. to ISO EN 17024 for NDT, welding, third party inspection and plant inspection
non accredited certification
own examination center
possibility to use previous qualification
system of approved exam centers from outside certification systems
Czech, Russian, English versions of examination questions
Czech, Russian, English, Arabic speaking examiners
ATG COMPLETE SERVICES FOR NDT
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG can support you for all methods in following directions:
o Analysis of technical problem
o Proposal for solution of this problem
o Verification/confirmation of proposed solution by own equipment and personnel
o Coverage of starting period of routine testing by ATG operators
o On the job training of customer operators
o Qualification and certification of the customer operators according to the customer request (SNT-TC-1A, ISO 9712, NAS 410 ……)
o Technical support for NDT equipment deliveries by Level 3
o Complete Level 3 services for the customer
19
NDT INSPECTION MAIN ACTIVITIES
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
METHOD EQUIPMENTS/ TECHNIQUES STAFF (contact person)
RT Radiographic Testing
radiography (from 20 kV up to 400 kV) gamagraphy (Ir, Se, Co) radiometry , Digital radiography, cabinets
Pavel Maranek, RT Level III
UT Ultrasonic Testing
through transmission, immersion + squirter system thickness measurement reflection
Jan Matousek, UT Level III
PT Liquid Penetrant Testing
dye penetrant fluorescent penetrant
Pavel Maranek, PT Level III
FPI Fluorescent Penetrant Inspection
fluorescent penetrant lines UT cleaning
Zbyněk Zavadil, PT Level III
MT Magnetic Particle Testing
hand yokes (AC/DC, 230V, 42V) mobile generators (AC/DC up to 4000A) stationary MT benches (ASTM 1444)
Josef Krejča, MT Level III
ET Eddy Current Testing
structuroscopes single-frequency ET apparatus multi-frequency ET apparatus with all probes
Petr Tichý, ET Level III
VT Visual Testing
direct VT of welds and castings indirect VT (boroscopy, endoscopy)
Vaclav Jandura, VT Level III
LT Leak Testing
integral methods (pressure) differential methods (bubble technique, penetrant,
He spectrometer)
Václav Jandura , LT Level III
20
21
ATG PRODUCTION FOR NDT
Products designed and produced by ATG,
Imported products, ATG production types
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
22
„ATG DOES NOT OFFER ONLY EQUIPMENT, BUT IT
OFFERS COMPLEX SOLUTION FOR YOU AS WELL“
Analysis of problem/task - proposal of solution - design –
realization/production - delivery - personnel qualification
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
23
PRODUCTION FOR NDT
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
Complex systems for all NDT methods: UT, ET, MT, RT Manipulators Transport system for testing
systems benches and stands UT, ET, MT, PT/FPI testing lines Handy equipment for NDT as: Electromagnetic yokes Viewers Densitometers Test and calibration blocks: Test pieces Etc.
Products designed and produced by ATG
PRODUCTION FOR NDT/ ATG COMPLETE SERVICES FOR NDT
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG OFFERS A COMPLETE SOLUTION FOR NDT:
o TECHNICAL PROBLEM ANYLYSIS
o TECHNICAL PROPOSAL OF POSSIBLE SOLUTIONS
o DELIVERY OF HW/EQUIPMENT
o DELIVERY OF NDT PERSONNEL QUALIFICATION ACCORDING TO THE REQUESTED QUALIFICATION AND CERTIFICATION SCHEME
o SUPPORT FOR IMPLEMENTATION OF NDT PROCESS BY COOPERATION FOR INTERNAL CUSTOMER QA SYSTÉM AN DLEGISLATIVE
o AUTHORIZED SERVICE
24
25
FPI LINES
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
26
MT SYTEMS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
27
UT MANIPULATORS / SCANNERS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
28
ET MANIPULATOR - WHEELTESTER
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
29
ATG FOR OIL & GAS AND POWER
INDUSTRY
Regions of activities/interest, Out-source services,
NDT equipment, Training of technical personnel, Others
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG FOR OIL & AND POWER INDUSTRY
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 30
Regions of ATG activities/interest:
Out-source services (Outside Agency) for:
oil refineries LPG projects
lube oil plants tank farms
oil and product pipelines hydrocrack plants
water and steam power plants nuclear power plants
NDT services-routine testing in all methods RT,UT,MT,PT, T,VT by Level II acc. to ISO 9712 or SNT-TC-1A
NDT supervision by Level III operators
NDT Level III service - implementation of company NDT system, NDT personnel training for PED too, support for creation of written procedures etc., support for ASME Code + NDT Services - Providing of NDT (RT, UT, MT, PT/FPI, ET, VT, LT) by EN and SNT-TC-1A qualified NDT operators/staff
Welding inspection - service of IWI and EWI, support for EN ISO 15614 Part 1:2004 (WPS a WPAR) and ISO 3834
Plant Inspection/Corrosion inspection and material selection
ATG FOR OIL & AND POWER INDUSTRY
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 31
NDT (Non Destructive Testing) equipment for:
crack and surface/subsurface defects detection of ferromagnetic materials MT - magnetic particle equipment, magnetizing units - own production
crack and surface defects detection of non-ferromagnetic materials PT/FPI
crack and surface/subsurface defects detection of conductive materials ET - lines (ROHMAN)
internal defects of castings RT - systems incl. shielding cabinets, roentgen tubes, manipulators, image processing
internal defects of cast, forged and machined parts UT - ultrasonic testing equipment
internal defects of castings RT - radiographic and radioscopic systems - real time imaging systems
ATG FOR OIL & AND POWER INDUSTRY
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 32
Training of technical personnel for:
:
Others: Risk and Failure Analysis
Design and Material Selection
Residual Life Assessment
NDT - according to SNT-TC-1A and ISO 9712 as approved training body of ATG Cert or alternatively by Reaktortest and TUV Nord which are accredited, training for PED (Pressure Equipment Directive) purposes
Welding - welding inspectors and coordinated personnel (ISO 14731) as ATG approved training body of CWS-ANB (Czech Welding Society - Authorized National Body) approved by IAB/IIW, EWF and EOTC
Plant Inspection/Corrosion - technicians and technologists
Third Party Inspection
33
PARTNERS & ATG AS A DISTRIBUTOR
ATG contractual partners, ATG collaborating inspection
and supervision companies, ATG as an (authorized) distributor
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG CONTRACTUAL PARTNERS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 34
HARTFORD STEAM BOILER INTERNATIONAL Ltd, Germany
support for ASME Code, PED (97/23/EU European Directive) as Notified Body
CANSPECT, Toronto, Canada independent third party inspection personnel qualification
METAMAK, Istanbul, Turkey personnel qualification and certification SVUOM s.r.o., Prague, Czech Republic (former National Research Institute for Material Surface Protection)
training center for corrosion personnel painting inspection
BV Inc., Prague, Czech Republic RLA - Residuum Life Assessment of Power Systems, Petrochemical Systems
TÜV Nord Czech (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)
ATG as approved training and examination center for NDT personnel qualification and certification according to ISO 9712
INSPECTA LATVIJA (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)
ATG as approved training and examination center for NDT personnel qualification and certification according to ISO 9712,
ATG CONTRACTUAL PARTNERS
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 35
REAKTORTEST s.r.o., Trnava, Slovak Republic (nuclear power plants inspection, accredited certification body for technical personnel)
ATG as approved training and/or exam centre for NDT according to EN 9712, EN 4179, corrosion personnel, welding inspectors
TÜV Nord, Essen, Germany (accredited certification body for NDT personnel + Recognized Third Party Organization acc. to 97/23/EU)
ATG as approved training and examination center for NDT according to ISO 9712
CWS ANB (Czech Welding Society Authorized National Body) - accredited certification body for welding personnel, approved by EWF, EOTC
ATG as approved training centre for EWI - European Welding Inspectors
API (American Petroleum Institute), USA Approved training body according to TPCP for RT, PT, Plant Inspectors and Welding Inspectors, now is transformed to API-U system
AWS (American Welding Society), USA Contractual agent organization for CWI and CRI qualification
36
Inspekta, Milano, Italy
T.EX.IN.srl, Dalmine, Italy
2R Due Erre Engineering, Ravenna, Italy
CANSPECT, Canada
S&Qmart, Turkey
Banford Associates, Iverurie, UK
Bureau Veritas, Prague, Czech Republic
3P Quality Services, Bavel, The Netherlands
Trest Belpromnaladka, Minsk, Belorussia
YAMANI INSTITUTE OF TECHNOLOGY, Algeria
ATG COLLABORATING INSPECTION AND SUPERVISION
COMPANIES
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
Marisand Impex, Bucharest, Romania
Al-Rook Company for Engineering Services, Baghdad, Iraq
Tecnic Company, Banjas, Syria
Omic, Tokyo, Japan
Baxcounsel Inspection Bureau, Bombay, India
INCOK, Seoul, Korea
QA Management, Perth, Australia
SQA Services, San Diego, USA
JIC, Tokyo, Japan
ATG AS AN (AUTHORIZED) DISTRIBUTOR
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 37
ARDROX/ CHEMETALL (BRD)
PT + MT + AEROSPACE REPAIR - chemicals, penetrants, cleaners etc
MR CHEMIE (GERMANY) PT + MT - UV lamps
SONATEST (GB) UT - handy defectoscopes, thickness meters, UT probes
SOCOMATE (RF) UT - multichanel systems
TECNITEST (SPAIN) UT - testing of spot welds for automotive industry
ROHMANN (GERMANY) ET - detection of surface defects in nuclear and aerospace industry, measurement of conductivity ET - detection of surface defects in automotive industry, multi-frequence sorting of materials - STRUCTUROSCOPY
ATC (USA) LT – leak testing systém for automotive industry especially
BALTEAU NDT (BELGIUM) RT - industrial mobile and stationary X-ray machines
KODAK (USA) RT - industrial radiographic films
OLYMPUS INDUSTRIAL /KEYMED (JAP/GB) VT- fibro-scopes, bore-scopes, video-scopes
38
LIST OF MAIN REFERENCES
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
39
ISO 9712 ENEL CZECH POWER PLANTS RWE TUV NORD TUV SUD SGS INSPEKTA SKODA MOO OF IRAQI REPUBLIC
IWI RWE TUV SUD SKODA VITKOVICE Level 3 Services SKODA WORKS and 50 companies
LIST OF REFERENCES - PERSONNEL QUALIFICATION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
EN4179/NAS410
AEROFLOT
CZECH AIRLINES
TRAVEL SERVICE
S7
ROSSYA AIRLINES
SATURN RYBINSK
VASO VORONEZH
UT AIR
IRAQI AIRWAYS
PRI NADCAP support
AERO VODOCHODY
LLV LATECAURE
JIHLAVAN
JIHOSTROJ
PBS VELKA BITES
40
MT (Magnetic Particle Testing) – benches and systems
o HUTA CELSA (PO) – for MAN
o VW (SK)
o GE AIRCRAFT ENGINES (CZ)
o CEZ – CZECH POWER PLANTS (CZ)
o KINEX (SK) – for Honneywell
o VIAM (RF)
o CZECH AIRLINES
o ………….
PT (Penetrant Testing) – FPI lines
o ELBIT (RO) – for RR
o WSK (PO) – for P&W
o AEROFLOT (RF)
o IAZ IRKUTSK (RF) – for IAZ, AIRBUS
o STROJMETAL (CZ) – for AUDI
o FAGOR (ESP) – for BMW
o HIDRIA – for VW
o UMPO UFA – for P&W
o HONEYWELL (CZ)
o …….
REFERENCE LIST - NDT HW
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
UT (Ultrasonic Testing) – UT tanks and automated manipulators/lines o PCC (CZ) – for RR, SNECMA, GE
o KINEX – for HONNEYWELL
o ALCAN/CONSTELIUM (CZ)
o …………….
ET (Eddy Current Testing) –manipulators, automated lines o TPA (GER) - wheeltester
o S7 - wheeltester
o VTS VNUKOVO – wheel tester
o UT AIR – wheeltester
o ………………
RT (Radiographic Testing) – radiographic, shielded workshops, manipulators o PBS BRNO (CZ)
o ARAKO (CZ)
o ………………….
LT (Leak Testing) – automated systems for AUTOMOTIVE industry o HELLA (SK)
o REA (SK)
o AISIN (CZ)
o …………..
41
Inspection work on petrochemical, power and other plants, which our experts were involved in (covering both shop and site inspections): Salahuddin Refineries I, II - Technoexport - SEORGI Baiji Lube Oil Plant - SCOP Tuba Tank Farm, Basrah - MHI - SCOP Third Pay Zone Development Project, Basrah - MHI -
SCOP Dry Gas Pipeline Project - SCOP Basrah Refinery I,II - Technoexport - SEORGI Strategic Pipeline - SCOP North Refinery Project, Baiji - Chyioda - SCOP Lube Oil Storage Tanks, Baiji - Technoexport - SCOP Sfaya Oil Field Project - SCOP Khabaz Oil Field - SCOP Daura Refinery - Technoexport – SEORGI Najibyiyah Power Plant, Basrah - Technopromexport
- MOI Daura Power Plant - Kraftwerk Union - SOE Al Shemal Power Station - GIE - SOE Haditha Hydraulic Plant - Litostroj - SOE
LIST OF REFERENCES - INSPECTION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
SF 6 Switchgears - 6 sites - SOE Water Treatment Plants - UN Projects - MOI Paper Mill, Basrah - Sulzer - MOI Paper Mill, Amara - Sulzer - MOI Cement Factory, Falluja - Polish Supplier - MOI Cement Factory, Kirkuk - MOI Sponge Iron Plant, Basrah - Cressot Loire - MOI East Factory, Amara - MOI Loading of Sulphur, Um Quasr, State
Organization for Minerals, MOIM
Inspection Engineers working at: Inspection Department of BPC, Basrah Inspection Department of NPC, Kirkuk
Two of our electrical inspectors worked as so called International Observers in Iraq on energy projects employed by the United Nations on the basis of the Security Council Resolution No.986 (Oil for Foodstuffs).
42
Snohvid Project - Nexans, Norway
Castor, Constor Projects - German Geselschaft fuer Nuclear Sicherheit, Germany
Remanent Life Assessment of Butadien Unit - Kaucuk Refinery, Kralupy, Czech Republic
Sulphur Production Projects - Ceska Rafinerska Refinery, Kralupy/Litvínov, Czech Republic
Risk Based Inspections of MTBE Production - Ceska Rafinerska Refinery, Litvínov, Czech Republic
Kandla – Bhatinda Pipeline Project, India
JGC Petrochemical Project - Dubai, UAE
Thessaloniki PVC Plant – Greece
Water Treatment and Distribution Plants, Syria
Banias GCG Power Plant - Banias GCG, Syria
Oersted Power Plant, Denmark
Nuevitas Power Plant, Cuba
Las Camariocas Aluminum Plant, Cuba
Shen – Tou Power Plant, China
Aircraft Engineering NDT Inspections - various clients
NDT performance and consulting - Skoda Auto, Czech Republic
Czech Power Plants (CEZ) - longterm periodical inspections of boiler drums in service in all power plants
LIST OF REFERENCES - INSPECTION
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
remnant life assesment, Czech Republic
Czech Power Plants (CEZ) - FCB Boiler K 8, Czech Republic
Heat Station Dvur Kralove - Boiler K 3, Steam Piping, Czech Republic
FBC (Fluidized Bed Cooler) for Boiler K 11, Energetika Trinec, Czech Republic
Teplarny Brno – Bus Steam Piping 10 MPa, Czech Republic
Teplarny Brno – Remnant Life Assessment of the Pressure System in service, Czech Republic
Eastman Sokolov, Power Division – Boilers K13, K14, Czech Republic
Hexion Sokolov, Power Division – Feeding Water Heat Conditioning, Czech Republic
Slavia Capital – Palma Bratislava – Biodiesel Production – Technical Due Diligence, Slovakia
Daiho, Impress, Eaton, Koito, Zexel Valeo, Candy/Conta – Technical Assistance during plant erections, Czech Republic
Raiffeisen Leasing – Technical Due Diligence at Paper Mill Plant Loučovice, Czech Republic
and others
43
ATG CONTACT LIST
Sales, Inspection/supervision, Personnel
training/qualification, ATG cert/personnel certification,
NDT services and Outside Agency, Production, Projection and design
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
ATG CONTACT LIST
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic
SALES Ondrej Doubek tel: +420 273 073 612 fax: +420 273 073 600
e-mail: doubek@atg.cz mobil:+420 731471889
Jan Vondra tel: +420 731 471 898 e-mail: sales@atg.cz
INSPECTION/SUPERVISION Jan Svub tel: +420 731125025
Fax: +420 273 073 650 e-mail: svub@atg.cz
Josef Prokop tel: +420 739634658 Fax: +420 273 073 650 e-mail: prokop@atg.cz
44
ATG CONTACT LIST
ATG – Advanced Technology Group – www.atg.cz
Beranovych 65, Praha 9, 190 00, Czech Republic 45
PERSONNEL TRAINING / QUALIFICATION
Vladimíra Kohoutková tel: +420 273 073 630 fax: +420 273 073 600
e-mail: kohoutkova@atg.cz mobil: +420 731125024
ATG CERT / PERSONNEL CERTIFICATION
Martin Ruzicka tel: +420 273 073 607 fax: +420 273 073 600
e-mail: ruzicka@atg.cz mobil: +420 731125024
NDT SERVICES & OUTSIDE AGENCY
Vaclav Jandura tel: +420 273 073 620 fax: +420 273 073 600
e-mail: jandura@atg.cz mobil: +420 604985302
PRODUCTION Zdenek Zdimera tel: +420 273 073 640
fax: +420 273 073 600
e-mail: zdimera@atg.cz mobil: +420 732950889
PROJECTION AND DESIGN Jakub Horejsi tel: +420 603181263
fax: +420 273 073 660
e-mail: horejsi@atg.cz
Recommended