View
250
Download
0
Category
Preview:
Citation preview
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
ASTM InternationalCommittee F02
Flexible Barrier Packaging
Michael L. TroedelCardinal Health, Inc.
March 10, 2011Cincinnati, OH
Agenda
F02 Scope
Officers
Sub-Committee Organization and Chairs
Sub-Committee Activities
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02 Scope
The development of terminology, test methods, practices, and specifications for flexible barrier packaging, and the promotion of research in this field. Standards under the jurisdiction of other Committees shall be used when
applicable.The area of interest of the committee is flexible barrier packaging including
the component barrier materials, their properties, and package design, development and production.
Flexible barrier packaging for the purpose of this Committee includes any package with at least one flexible component that can be bent or folded
back upon itself. Typical flexible barrier materials are paper, nonwovens, plastic films, and
metal foils used alone, treated or in various combinations.
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
Officers
Chairman: Hal Miller, Pace Solutions LLCVice-Chairman: John J. Spitzley, Spartan Design Group
Recording Secretary: Diona R. Sommario, Boston Scientific Inc.Membership Secretary: Gerald J. Montgomery, Medtronic Inc.
Past Chairman: Michael L. Troedel, Cardinal Health, Inc.Member-at-Large: Curtis L. Larsen, Spartan Design Group
Member-at-Large: Edward J. Emerson, Mocon Inc. Member-at-Large: Patrick J. Nolan, DDL Inc.
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
Sub-Committee Organization and Chairs
F02.10 Permeation - Michael TroedelF02.15 Chemical/ Safety Properties - Marilyn Baker
F02.20 Physical Properties - Marie TkacikF02.40 Package Integrity - Nick Winters
F02.50 Package Design and Development - Dhuanne Dodrill F02.90 Executive – Committee Officers
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.10 Permeation
D1434-82(2009) Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D3079-94(2009) Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
D3985-05(2010) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
E398-03(2009) Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement (WK20329)
F119-82(2008) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.10 Permeation
F1115-95(2008) Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1249-06 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
(WK29258)F1307-02(2007) Standard Test Method for Oxygen Transmission Rate
Through Dry Packages Using a Coulometric SensorF1927-07 Standard Test Method for Determination of Oxygen Gas
Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.10 Permeation
F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared
Detector
F2622-08 Standard Test Method for Oxygen Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
WK9915 Guide to Oxygen Permeability Test Methods
WK30771 New Test Method for Impermeability of Flexible Barrier Materials to the Passage of Air
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.15 Chemical/Safety Properties
F34-02(2007) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F874-98(2008) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
F1308-98(2008) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1317-98(2007) Standard Test Method for Calibration of Microwave OvensF1349-08 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing
Extractables from Microwave Susceptors
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.15 Chemical/Safety Properties
F1416-96(2008) Standard Guide for Selection of Time-Temperature Indicators
F1500-98(2008) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as
Food SimulantsF1519-98(2008) Standard Test Method for Qualitative Analysis of Volatile
Extractables in Microwave Susceptors Used to Heat Food ProductsF1608-00(2009) Standard Test Method for Microbial Ranking of Porous
Packaging Materials (Exposure Chamber Method)
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.15 Chemical/Safety PropertiesF1884-04 Standard Test Method for Determining Residual Solvents in
Packaging MaterialsF2013-10 Standard Test Method for Determination of Residual Acetaldehyde
in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization
Detector (WK 27778)F2475-05 Standard Guide for Biocompatibility Evaluation of Medical Device
Packaging Materials (WK 28510) F2638-07 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.20 Physical Properties
F88-09 Standard Test Method for Seal Strength of Flexible Barrier MaterialsF392-93(2004) Standard Test Method for Flex Durability of Flexible Barrier
Material (WK30963)F904-98(2008) Standard Test Method for Comparison of Bond Strength or
Ply Adhesion of Similar Laminates Made from Flexible MaterialsF1140-07 Standard Test Methods for Internal Pressurization Failure
Resistance of Unrestrained Packages
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.20 Physical Properties
F1306-90(2008) Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1921-98(2004) Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of
Flexible WebsSee WK21807 proposed revision
F2029-08 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
F2054-07 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.20 Physical Properties
F2203-02(2007) Standard Test Method for Linear Measurement Using Precision Steel Rule
F2217-02(2007) Standard Practice for Coating/Adhesive Weight Determination
F2250-03(2008) Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2251-03(2008) Standard Test Method for Thickness Measurement of Flexible Packaging Material
F2252-03(2008) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.20 Physical Properties
F2824-10 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
WK23455 Abrasion Resistance of Flexible Packaging Films
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.40 Package Integrity
D3078-02(2008) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
F1886-98(2009) Standard Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
F1929-98(2004) Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
See also WK23814 proposed revisionF2095-07 Standard Test Methods for Pressure Decay Leak Test for Nonporous Flexible Packages With and Without Restraining Plates
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.40 Package Integrity
F2096-04 Standard Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test) (WK28919)
F2227-02(2007) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer
Gas MethodF2228-02(2007) Standard Test Method for Non-Destructive Detection of
Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
F2338-09 Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
F2391-05 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.40 Package Integrity
F2714-08 Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
WK23964 Oxygen Analysis of Packages Using Headspace Sampling
WK25128 Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.50 Package Design and Development
E171-94(2007) Standard Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
F17-08 Standard Terminology Relating to Flexible Barrier Materials
F99-07 Standard Practice for Writing a Specification for Flexible Barrier Rollstock Materials
F1278-96(2008) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.50 Package Design and Development
F1980-07 Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
F2097-10 Standard Guide for Design and Evaluation of Primary Packaging for Medical Products
F2559-06 (2010) Standard Guide for Writing a Specification for Sterilizable Peel Pouches
F2825-10 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
(WK 25328)
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
F02.50 Package Design and Development
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
Next F-2 Meetings
April 13 – 14, 2011Anaheim, CA
November 2 – 3, 2011Tampa, FL
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
March 8 – 10, 2011Hyatt RegencyCincinnati, OH
Thank you
Questions?
E-mail: michael.troedel@cardinalhealth.com
Recommended