View
221
Download
0
Category
Preview:
Citation preview
7/30/2019 Artificial Light Tracking System
1/13
4/20/2013
SUBMITTED TO:
SIR SALMAN IJAZSUBMITTED BY:
MUHAMMAD MUZAMMIL MUKHTAR(10-ME-117)
QAZI SAMIE SAEED(10-ME-120)
MALIK AHMED NADIR(10-ME-132)
LAB
PROJECTCONTROLLENGGLAB
7/30/2019 Artificial Light Tracking System
2/13
10-ME-117,120,132 Page 1
ARTIFICIAL LIGHT TRACKING SYSTEM:
PHYSICS OF THE SYSTEM:
When equal light intensities are detected by the two photodiodes, the electrical bridge is
balanced, and zero voltage is applied to the drive motor. When one photodiodes receives more
light then the other, the bridge is unbalanced, and a nonzero voltage is amplified and applied to
the drive motor, which then moves the photodiodes toward the equal-light intensity position.
Similar systems are used for precision machine tool alignment, where the light is reflected from
calibrated scale or transmitted through a tiny hole in the tool or the work. Variations of this
system are used to track the sun or another star in navigation systems, to follow aircraft in
collision avoidance systems, and to track the recording path on optical videodisks as shown
below
.
ARTIFICIAL LIGHT TRACKING SYSTEM
BLOCK DIAGRAM:
Summing junction Photodiode circuit Dc motor and gears Position velocityAnd amplifier relation
L(s) + motor R(s)
voltage
_
K 0.1
s+2
1
S
7/30/2019 Artificial Light Tracking System
3/13
10-ME-117,120,132 Page 2
TRANSFER FUNCTION:
It is denoted by T.F
As we know
T.F= OUTPUT = R(s)
INPUT L(s)
REDUCED BLOCK DIAGRAM:
L(s) R(s)
So our transfer function will be
T.F = 0.1
S^2+2S+0.1K
Characteristics equation will be For checking the stability of the system we will apply the ROUTHS HURWITZ TECHNIQUE
1 0.1k 2 0
0
The system transfer function is ,in terms of the gain constant K,
which is stable for all K>0
k>0
Here we can see that there is no sign change in the system during R.H.T. This means system is stable.
We will take the values of K>0
0.1K
S^2+2s 0.1k
7/30/2019 Artificial Light Tracking System
4/13
10-ME-117,120,132 Page 3
MATLAB CODING:
%lab project Artificial Light Tracking Systema=[0.1]b=[1 2 0.1]t=tf(a,b)step(t)stepinfo(t)a =
0.1000
b =
1.0000 2.0000 0.1000
Transfer function:
0.1
---------------
s^2 + 2 s + 0.1
SYSTEMS PARAMETRES:
RiseTime: 42.8218
SettlingTime: 76.7539
SettlingMin: 0.9015
SettlingMax: 0.9983
Overshoot: 0
Undershoot: 0
Peak: 0.9983
Peak Time: 124.5266
RESPONSE OF THE SYSTEM:
7/30/2019 Artificial Light Tracking System
5/13
10-ME-117,120,132 Page 4
Hence this system having maximum setting time so it is not suitable for our system.
RESPONSE OF THE SYSTEM AT DIFFERENT VALUES OF K:
MATLAB CODING:
%lab project Artificial Light Tracking Systemk=500a=[0.1*k]b=[1 2 0.1*k]t=tf(a,b)step(t)stepinfo(t)
7/30/2019 Artificial Light Tracking System
6/13
10-ME-117,120,132 Page 5
SYSTEMS PARAMETERS:
Rise Time: 0.1650
Settling Time: 3.7008
Settling Min: 0.5933
Settling Max: 1.6381
Overshoot: 63.8069
Undershoot: 0
Peak: 1.6381
Peak Time: 0.4443
This value of K having overshoot >20% hence it is not suitable.
MATLAB CODING AT K=20:
%lab project Artificial Light Tracking Systemk=20a=[0.1*k]b=[1 2 0.1*k]t=tf(a,b)step(t)
7/30/2019 Artificial Light Tracking System
7/13
10-ME-117,120,132 Page 6
stepinfo(t)
SYSTEMS PARAMETER AT K=20:
Rise Time: 1.5225
Settling Time: 4.2166
Settling Min: 0.9089
Settling Max: 1.0432
Overshoot: 4.3155
Undershoot: 0
Peak: 1.0432
Peak Time: 3.1790
Hence this system having the overshoot and its settling time is relatively long so it is not suitable.
MATLAB CODING AT K=5:
%lab project Artificial Light Tracking Systemk=5a=[0.1*k]b=[1 2 0.1*k]t=tf(a,b)step(t)stepinfo(t)
7/30/2019 Artificial Light Tracking System
8/13
10-ME-117,120,132 Page 7
SYSTEMS PARAMETERS AT K=5:
Rise Time: 7.7014
Settling Time: 14.0032
Settling Min: 0.9051
Settling Max: 1.0000
Overshoot: 0
Undershoot: 0
Peak: 1.0000
Peak Time: 35.8174
By checking the different responses of values of K we see that it give the settling time relatively long in
consequence of the small degree of relative stability.
BY THE ADDITION OF TACHOMETER (sensor or velocity feed back):
The performance of this system can be improved substantially by the addition of velocity feedback as
well as the position feedback. A tachometer coupled to the drive motor shaft will produce a voltage
nearly proportional to the motor speed, which in turn is proportional to the photodiode velocity. Adding afraction of this voltage to the bridge voltage (which is amplified to drive the motor) results in the block
diagram of fig as shown below.
7/30/2019 Artificial Light Tracking System
9/13
10-ME-117,120,132 Page 8
Light position
L(s)
P(s)
- -
Using the Masons gain rule on the systems signal flow graph in fig below, we can write
L(s) 1
1 P(s)
(-4K)
(-1)
By theMasons rule
the following equation we can write as shown below
()
() ()(())()
By solving the above equation we will get,
() ()
Now from the above equation the characteristics equation will be ( ())
(s+2)^2= = ()Is achieved with K=250, K=0.08
With these values of K and K, the system response is critically damped and has a relative stability of 5units. This step response is shown below.
Amplifier
K
Dc motor and
gears
Velocity-position
relation
Tachometer
and gears 4
Gain
Adjustment
K
7/30/2019 Artificial Light Tracking System
10/13
10-ME-117,120,132 Page 9
MATLAB CODING AT M-FILE:
%lab project Artificial Light Tracking System By the addition of tachometerk=250c=0.08a=[0.1*k]b=[1 2+0.4*k*c 0.1*k]t=tf(a,b)step(t)stepinfo(t)
ANS
>> k=250c=0.08
a=[0.1*k]b=[1 2+0.4*k*c 0.1*k]t=tf(a,b)step(t)stepinfo(t)
k =
250
c =
0.0800
a =
25
b =
1 10 25
Transfer function:
25---------------
s^2 + 10 s + 25
RESPONSE OF THE SYSTEM:
7/30/2019 Artificial Light Tracking System
11/13
10-ME-117,120,132 Page 10
Hence system response at K=250 AND K=0.08 is critically damped.
SYSTEMS PARAMETERS:
Rise Time: 0.6718
Settling Time: 1.1668
Settling Min: 0.9024
Settling Max: 1.0000
Overshoot: 0
Undershoot: 0
Peak: 1.0000
Peak Time: 2.7339
Hence now this system is acquired at our desired value where,
1. Settling time
7/30/2019 Artificial Light Tracking System
12/13
10-ME-117,120,132 Page 11
7/30/2019 Artificial Light Tracking System
13/13
10-ME-117,120,132 Page 12
Recommended