View
133
Download
5
Category
Preview:
Citation preview
Error: Reference source not found
AP Shell Test ScriptApril 11, 2002
Items to Test: Invoice Entry Vendor Entry Payment processing Period Close What happens when an recruit becomes an employee, will we be able to keep track of all of the checks sent to one individual
or will that information get lost during change of vendor types Will we be able to create a dummy posting for 1099 vendor types year to date so they do not show up on the GL Can we enter customer number at the site level or the invoice level, can we enter tax registration at the site level Confirm invoice aging report is acceptable What happens if more than ten invoices are tied to a single payment What happens if we enable the VAT (AP-5, 6) later Test running the "Invoices Transfer to GL&FA" to confirm that we won't get errors because we don't have fixed assets How can we segregate Electronic funds transfer from a check run, do we need separate pay groups Will we have to enter a project number and client number for every invoice? Clean up table Run the invoices transfer to GL and FA request set and confirm that there are no problems even though we don't have fa
installed.
Entering Employees confirm that we can enter employee business groups Entering T&E expense reports Applying Advances to T&E Reports Check invoice hold and approval reasons
Janice, please complete the following stepsLog onto http://oracleprod.prtm.com:8002/OA_HTML/US/ICXINDEX.htmUser name: KateyAs Expectedword: CunninghamI assume that you have logged onto Oracle before, if not you will need to download JInitiator software, which will take about five minutes.
Select the PRTM_AP_Manager responsibility
As you go through the following steps, please keep track of the following: How does Oracle compare to Peachtree in terms of ease of entry or time required to complete the transaction? Do you receive any error messages or does anything not work right? Is there any customization that would make your life easier?
Error: Reference source not found
Notes: The accounting period which Kunal set up is January of 99. If you try to enter any invoices is a period other than January of 99,
Oracle will give you an error. When you do enter invoices in Jan 99, it will also give you an error asking if you know that was over a year ago. Just say ok.
When you try and generate payments you are going to get some errors because we haven’t set up the check printer yet.
Error: Reference source not found
Business Scenarios Test SequencesTest Status: Draft, Review, Success, and Defective
RD 070 Cross Ref
Tests Business Scenarios Test Name Tester1 Tester2 Tester3 Date Notes
10 Open AP Accounting Period - Able to go to the last period and future periods.
Emanuel 29-Mar-10 Pass
20 Enter and Maintain Supplier Records.
Emanuel 29-Mar-10 Pass
30 Enter an invoice Emanuel 29-Mar-10 Pass29-Mar-10 Pass
50 Process and pay rent (Recurring Invoices)
Emanuel 29-Mar-10 Fail
60 Run AutoApproval from the Navigator.
Emanuel 29-Mar-10 Pass
70 Cancel Unpaid Invoices. Emanuel 29-Mar-10 Fail
90 Invoice Distribution Correction. Emanuel 29-Mar-10 Pass100 Test unable to enter duplicate
vendor invoicesEmanuel 29-Mar-10 Pass
110 Hold Payments to selected suppliers, invoice
Emanuel 29-Mar-10 Pass
120 Run Invoice on Hold Report Emanuel 29-Mar-10 Pass130 Enter Manual Check/Quick Check.
Able to switch to different bank account numbers.
Emanuel 29-Mar-10 Pass
140 Select Invoices for payment and print checks. Able to run a check preview.
Emanuel 30-Mar-10 Pass
150 Payable Inquiry. Search by Inv#, Check#, Vendor name & or #.
Emanuel 30-Mar-10 Pass
160 Void Check. Emanuel 30-Mar-10 Pass170 Post to General Ledger Emanuel 30-Mar-10 Pass180 Run reports. Emanuel 30-Mar-10 Pass190 Payables Month-End Processing. Emanuel 30-Mar-10 Pass200 Payables Close Period. Emanuel 30-Mar-10 Fail
Error: Reference source not found
10 Test Specification – Open AP Accounting Period
RD.070 Reference Number
Step Actionor Path Expected Results
Notes
10.1 Open Current AP PeriodSetupàCalendaràAccountingàAP Accounting PeriodFind the period you’d like opened. Change the Status field of that period from Never Opened to Open.
As Expected Opened the Nov-09 period – The status is changed from Never Opened to Open without any error
10.2 Save your work. The period status field will show ‘Open’. Payables transactions entry and posting should be allowed to the open accounting period; not allowed for a future (unopened) period. Record should save without error.
Error: Reference source not found
20 Test Specification – Enter and Maintain Supplier Records
RD.070 Reference Number
Step Actionor Path Expected Results
Notes
20.1 Add several new suppliers. Including at least one of your PO suppliers, rent supplier, utility supplier and an employee. Add a couple with more than one site.SuppliersàEntryEnter the types of suppliers mentioned above.Enter Name at the header.
Enter type information on the Classification tab. (Type for PO, rent and utility supplier should be SUPPLIER, type for Employee should be EMPLOYEE. Also include employee name. Employee name should default from HR tables (assuming Employees have already been entered as part of the PO implementation.
Enter Paygroup (Note: if necessary PayGroup can be entered at the site level.) Paygroup will be used to group payments together. For example, you may want to have a Supplier paygroup and an Employee paygroup.
SuppliersàEntry (B) SitesProvide address information. Check site Uses that apply. Save your work.Click on Accounting tab. Is default information correct?
For one supplier site, change the default liability account.Save your work
Verify additional information defaults are correct. Employee will automatically generate.As Expected
As Expected
As Expected
As Expected
Record should save without errorDefault information should be what was entered in Financial Options in AP.Record should save without error
Entered supplier as -Test Employee (Database), Test PO Supplier, Test Rent Supplier, Test Utility Supplier & Test Multiple Site
Entered the Classification Type as Employee, Office Supplies, Rent, Administrative & Office Services for the above suppliers respectively
Pay group for Employee is changed to “EMPLOYEE” and for others it is defaulted as” Wire”
The Accounting Information for the segment Account is defaulting as code=211053 (Imprest Payable- Employees)even for the new suppliers other than employees which is Incorrect
Tested the “Test Rent Supplier” Liability account from Imprest Payable to Vendor Payable successfully
20.2 Update a supplier recordSuppliersàEntry (Query supplier name)Update the Supplier Address for the rent supplier.Save your work.Query the changes.
Record should save without error
As Expected
Changes should display.
Changed the Test Rent Supplier Address
Error: Reference source not found
30 Test Specification – Enter an Invoice not Matched to a Purchase Order and Run Batch Approval
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
30.1 Enter an invoice InvoicesàEntryàInvoice Batches <if Batching is on>Enter Batch information
InvoicesàEntryàInvoices<if Batching is not on>Use one of the suppliers entered in the last step.
On the Invoice form, enter all fields highlighted in yellow. Save your work.
InvoicesàEntryàInvoices (B) DistributionsEnter full amount of the invoice to a valid distribution. Save your work.
As Expected
You should be able to pick your supplier and see the site you entered.As Expected
Invoice header information should save without error. Distribution total = 0.00As Expected
You should be able to enter accounting distribution manually. Record should save without error and the Invoice Total Distribution Total numbers at the upper right should be equal.
As Expected
Entered the Invoice No- “Test Inv1” for supplier “Test Utility Supplier”
Entered the Distribution as 11.81.954.604010.0000.0000 for the above Invoice
30.2 Enter two invoices for the same vendor site. Save your work.
Record should save without error
As Expected
Entered “Test Inv2” for the Vendor “Test Utility Supplier” for the same site
30.3 Create two at least two distribution lines for one invoice (enter client number and project number at the promptSave your work.
Record should save without errorAs Expected
Entered Invoice no’” Test Inv3” for the supplier “Test Rent Supplier” with 2 Distribution Lines as
11.81.954.604010.0000.000011.81.954.621010.0000.0000
30.4 Make one invoice a Pay Alone invoice.This is done by checking the Pay Alone box on the Invoice form. (Tab several times. Field is on the far right.)Save your work.
Record should save without error
As Expected
Entered the Invoice no.” Test Inv4” for the supplier “Test Multiple Site” by checking the Pay Alone check box
30.5 Enter a capital asset invoice.Be sure to code the expense distribution to the asset clearing accout. Save your work.
Record should save without errorFAIL
Asset Clearing Account code not available in LOV of the Invoice Distribution
Error: Reference source not found
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
30.6 Run AutoApproval in batch mode to approve the invoices you’ve entered for payment.From the menu bar:View>Requests>Submist a New RequestSingle RequestName: Payables ApprovalParametersOption: AllPaygroup: select if applicable (i.e.: “Supplier”)
Monitor the request.
As Expected
AutoApproval should complete without error.
Ran the “Invoice Validation” process refer Request ID= 645393 which completed normally
30.7 Query the Invoices you just approved. InvoicesàEntryàInvoices (Ctrl + F11)
AutoApproval should not result in any matching holds. The holds on each of the invoice selected for AutoApproval should be 0 and the Status for thevoice should show as Approved.As Expected
The Entered Invoices are approved and validated
30.8 Enter and approve a few more invoices using different suppliers. As Expected Entered Invoices for supplier “A D Handy Co, Inc” and “A-1 Copier Tec. Inc.” and validated the same manually
Error: Reference source not found
50 Test Specification – Create Recurring Invoices and Approve
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
50.1 Create Recurring Invoices (MUST setup special calendar first—this should have been done prior to the testing phase)Invoices àEntryàRecurring InvoicesFirst, you will create a Recurring Invoice template:Enter the rent Supplier, special calendar, Number of periods to be used in creating invoices, and the Starting Period.Click on the Template Definition Tab. Give the template a name, number and distribution set or PO.Click on the Amounts tab. Enter the amount of monthly rent. Leave Change % at 0. Leave the Special Invoices amount fields and associated period fields blank.Save your work.
Fail
Should be able to save Template without errors.
Error during Creating Recurring Invoices – Refer File attached AP step 50.1 for screen shot of the error
Periods not opened and Calendar not created for recurring Invoices
50.2 Second, you will generate Recurring invoices:Invoices àEntryàRecurring Invoices (B) Create Recurring InvoicesIn the Create Invoices window, choose Create. The new invoices are now regular invoices and must be approved before they can be posted or paid. Save your work.
Invoices should be generated without errors.Fail
Subsequent activity to the above step
Error: Reference source not found
60 Test Specification – Run Approval from the Navigator
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
60.1 Submit AutoApproval in batch mode. OtheràRequestsàView Select Single RequestSelect ‘Payable Approval’ in the ‘Name’ fieldParametersOption: AllPaygroup: select if applicable (i.e.: “Supplier”)
Monitor the request.
AutoApproval should complete successfully and print a summary of holds placed (if any apply).
As Expected
Ran the “Invoice Validation” request in Batch Mode refer Request ID= 645398 which completed successfully without any holds
Error: Reference source not found
70 Test Specification – Cancel Unpaid Invoice
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
70.1 Cancel unpaid invoices. Click on one of invoices entered above in test 30.InvoicesàEntryàInvoices Query one of invoices entered. Select ‘Actions’ and ‘Cancel’ and ‘OK’. If you re-query, the Invoice shows a status of ‘Cancelled’.
Invoice should have status of ‘Cancelled’.
Fail
Tried canceling the Invoice No- “Test Inv1” for supplier “Test Utility Supplier” which failed due to GL period not opened Error code-APP-SQLAP-10706- Refer the file attached for screen shot of the error
Error: Reference source not found
90 Test Specification – Modify Invoice Distributions
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
90.1 Modify invoice distribution for one of the invoices you have created -- adjust to different expense account, reverse existing distribution line, create a new distribution line.InvoicesàEntryàInvoicesQuery an invoice you have already created.InvoicesàEntryàInvoices (B) DistributionsClick on the distribution line you’d like to reverse.Click on the Reverse Button.Say Yes.
Enter the correct distribution.Save your work.
Validate the corrections – view invoice in the invoice inquiry screen & run Invoice Register Report
As Expected
A new line will be create with a negative amount equal to the amount in the line reversed.
A new distribution will be saved.
As Expected
Reversed the Invoice Distribution for the “Test Inv2” for the Supplier “Test Utility Supplier” From 11.81.954.604010.0000.0000To 11.81.954.604080.0000.0000
Ran the Invoice Register- refer the Request ID= 645402 which shows the reversed distribution in the output of the report
90.2 Try to reverse a distribution for an invoice that has been posted in an earlier period.
Validate the corrections – view invoice in the invoice inquiry screen & run Invoice Register Report
As Expected Revered the distribution for the supplier “Boise Cascade” Invoice no. 311661 which was posted in period of Jun 09
Ran the Invoice Register refer Request ID= 645405 for the supplier “Boise Cascade” and verified the report for the reversed Distribution Invoice
Error: Reference source not found
100 Test Specification – Duplicate Invoice Number for One Supplier
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
100.1
Check Duplicate Invoice Number entry. Try to enter same invoice number for supplier.InvoicesàEntryàInvoice Batches
Should not be allowed to do this.
As Expected
Tried entering the Same Invoice number with the same supplier and the system throws a Error message –“APP-SQLAP-10024” This value already exists.
Error: Reference source not found
110 Test Specification – Hold Payment to Supplier
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
110.1
Hold Payment to SupplierSuppliersàEntry Query Supplier go to tab ‘Control’ and click on check box ‘Hold All Payments’Save your work.
This will not allow Supplier to be paid. Try to enter payment to Supplier.
User should be able to update Supplier record.
As Expected
User should not be able to issue Payments
As Expected
Modified the “Test Rent Suplier” at site level by checking the Hold All Payments’ field at the Supplier form
System hold the payments only if Hold is placed at site level only
Tried making payment to the above supplier after modifications and system throws error APP-SQLAP-10047
Error: Reference source not found
120 Test Specification – Check Invoices on Hold
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
120.1
Run Invoice on Hold ReportOtheràRequestàView, select ‘Invoice on Hold’
Review holds; resolve any accounting holds
As Expected
Ran the request “Invoice on Hold Report” refer request ID= 645410 which shows the output for Hold Invoices
Error: Reference source not found
130 Test Specification – Enter Manual Check
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
130.1
Enter Manual Check. PaymentsàEntryàPaymentsEnter payment information like bank account and document type.Click Enter/Adjust Invoices.Select the invoice to be paid.Save your work.
Should be able to select and pay invoice for supplier.
As Expected
Refer the Document Num 1571 for payment to supplier “Test Multiple Site” and manual Check/Document no 41109 for supplier “A-1 Copier Tec. Inc”.
130.2
Print Check.Click on the Actions button on the Payments window.PaymentsàEntryàPaymentsàActionsàActions: Check Format and Print Now.Click OK.
A check image should be created> Check concurrent request for Format Payments.
As Expected
Refer the Concurrent ID= 645413 and 645414 for Payment Process Manager and Format Payments (Standard Oracle) for payment made to supplier “Test Utility Supplier” and Document no-1572
Error: Reference source not found
140 Test Specification – Execute a Check Run
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
140.1
Submit AutoSelect, the process that automatically selects all invoices ready / eligible for payment. (Don’t format payments or print payment register)PaymentsàEntryàPayment BatchesEnter required Payment Batch information. Enter the pay through date as the last day of the period. Leave PayGroup blank.Save your work.PaymentsàEntryàPayment Batches (B) Actions à Select Invoices Build Payments, and Print Preliminary Payment RegisterClick OK.
You should be able to create a Payment Batch. As Expected
Three concurrent jobs should be kicked off. One for the AutoSelect, one for the Build and one for the Preliminary Payment Register.
As Expected
Refer concurrent Payment Process Manager (645417), AutoSelect (645418), Build Payments(645419) and Preliminary Payment Register (645420) completed successfully
140.2
Submit Preliminary Payment RegisterFrom the Menu bar: View> Requests> FindClick on the line for the Preliminary Payment Register.Click on the View Output Button.
All 3 jobs should complete with a status of Normal
As Expected
You should be able to view the invoices that have been selected for payment.
As Expected
The request Preliminary Payment Register output shows the Payment Batch shows the Invoice nos and payment amounts for the Invocies
140.3
Pull and Invoice out of the payment batch.PaymentsàEntryàPayment Batches Re-query your batch - F11, Enter your Batch name, Ctrl + F11Click on Actions.Deselect Format Payments.Select Modify Payment Batch.Click OK.You will be taken to Modify Payment Batch window.Set the Pay flag on an invoice in the batch to ‘No.’Click Build.
As Expected
Concurrent process to rebuild should launch.
As Expected
Refer concurrent ID= 645424 for Build Payments after modification in the payment batch
Error: Reference source not found
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
140.4
Short pay in invoice in the payment batch:At the Payment Batches form, requery your batch again. (F11, Enter your Batch name, Ctrl + F11)Click on Actions.Deselect Format Payments.Select Modify Payment Batch.Click OK.Decrease the amount of the Payment (Change the amount in the Maximum field)
As Expected
Payment amount should be decreased.
As Expected
Modified the Batch Payments successfully by decreasing the amount of one of the invoices
140.5
Run the Preliminary Payment Register to see your changes:At the Payment Batches form, requery your batch again. (F11, Enter your Batch name, Ctrl + F11)Click on Actions.Deselect Format Payments.Select Print Preliminary Payment Register.Click OK.From the Menu bar: View>Requests: Preliminary Payment RegisterView Output.
As Expected
Changes made in 14.3 and 14.4 should be reflected in the report.
The concurrent ID= 645429 For Preliminary Payment Register is run which shows the decrease n the amount of the selected batch
140.6
Format the Batch:At the Payment Batches form, requery your batch again. (F11, Enter your Batch name, Ctrl + F11)Click on Actions.Accept Format Payments selection.Click OK.From the Menu bar: View>Requests: Format PaymentsView Output.
As Expected
Formatted check images should be for expected amounts (i.e.: should include changes made above)
The concurrent ID= 645528 for Format Payments (Standard Oracle, Form Feed) in submitted
140.7
Confirm a portion of the Checks (Simulating a Printer Jam)At the Payment Batches form, requery your batch again. (F11, Enter your Batch name, Ctrl + F11)The Batch Status should now show as FormattedClick on Actions.Accept Confirm Payment Batch selection.Click OKYou should be taken to the Confirm Batches form.Record the first 2 check in the batch as ‘Printed.’Click Restart Batch button.Enter the document number to use (should be the next one after the 2 printed checks).Build and Format Checks again and confirm the rest of the batch completely.
As Expected
In the end all payments (checks) in the batch should have a status of Printed.
The concurrent ID= 645533 for Format Payments (Standard Oracle, Form Feed) in submitted
Error: Reference source not found
150 Test Specification – View Supplier Payment History
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
150.1
View Supplier Payment History by Supplier TypePaymentsàInquiry
See both pre-payment and final invoice payments recorded on vendor history.
As Expected
150.2
View Paid Invoice History & DetailsInvoicesàInquiry
See payment method (check) and number detailed under invoice payments
As Expected
Error: Reference source not found
160 Test Specification – Void a Check
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
160.1
Void check from Payment BatchPaymentsàEntryàPayments Select ‘Actions’ click ‘Void’.
Void check should be on report ‘Void Payment Register’. Invoice should be able to be paid again.As Expected
Voided the Document 41113 paid on 30-Nov-09 for the Supplier “Accountemps” Invoice No 30045570
160.2
Query Invoice to see Paid amount =0InvoicesàInquiry
Paid amount =0
As Expected
The above Invoice is Open for Payment now
Error: Reference source not found
170 Test Specification – Post All Previous Transactions from Payables to the GL
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
170 Post to GL.OtheràRequestsàView, select ‘Payables Transfer to GL’
Should post all approved entries in AP to GL
As Expected
Selected the Create Accounting Tab in the Invoices Batch and the “Payables Accounting Process” ID= 645550 is submitted
Submitted the Request “Payables Transfer to General Ledger” Concurrent ID= 645549
The entrees are Posted to Gl refer the Journal Import Execution Report request ID= 645553
Error: Reference source not found
180 Test Specification – Run Payables Reports
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
180.1
OtheràRequestsàViewRun Invoice Register ReportRun Vendor Payment History ReportRun Key Indicators ReportsRun AP Trial Balance ReportRun Vendor Listing ReportRun Expense Distribution Report
Verify all reports complete and data is accurate.
As Expected
Invoice Register Request ID= 645568Supplier Paid Invoice History=Request ID= 645555Key Indicators Report=Request ID= 645556Accounts Payable Trial Balance=Request ID= 645557Suppliers Report=Request ID= 645558Expense Distribution Report Not Available
Error: Reference source not found
190 Test Specification – Run Month End Reports
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
190.1
Payables Month-End Processing.OtheràRequestsàView
Run Posting Holds ReportRun Expense Distribution Detail ReportRun Payables Transfer to GLSubmit Month-end reports
List of invoices not posting to GL period due to posting holds; resolve; re-run if necessary until report is clear.Review distributions before posting. Make corrections if necessary.
Create journal entries in GL
Review all reports in report set. Particularly, Posted Invoices Register Posted Payments Register Accounts Payable Trial Balance
As Expected
Invoice on Hold Report=Request ID= 645569Expense Distribution Report Not AvailablePayables Transfer to General Ledger=Request ID= 645549Posted Invoice Register =Request ID= 645562 Posted Payment Register=Request ID= 645563Accounts Payable Trial Balance=Request ID= 645557Unaccounted Transactions Report=Request ID= 645560
Error: Reference source not found
200 Test Specification – Close the AP Period
RD.070 Reference Number
Step Actionor Path
Expected Results Notes
200.1
Close Current Period. DO NOT PERMANENTLY CLOSE. SetupàCalendaràAccountingàAP Accounting PeriodsChange the Status from Open to Closed.Save your work.
Period update should be made without error.
Failed
The period for Nov-09 did not got closed although the Period Close Exceptions Report and Unaccounted Transactions does not show any struck entries
Refer screen shot attached200.2
Attempt entry of an invoice to closed period. Use closed period for GL Date.InvoicesàEntryàInvoice Batches
Period will not be available for further invoice entry in AP. Oracle will reject the GL Date for the closed period.
As Expected
Depending on above point
200.3
Re-Open the just close period, add an invoice for a vendor and approve it.SetupàCalendaràAccountingàAP Accounting Periods InvoicesàEntryàInvoice Batches
You should be able to enter an invoice into the previously closed (now open) period.As Expected
Refer the Invoice n. Test Inv 10 entered in Sep-09 period
200.4
Run the Unposted Invoice Sweep OtheràRequestsàViewChoosing to move unposted distributions to the next accounting period.
Verify results of the Sweep.Failed
Not allowed to close the period the Unaccounted Transactions Report for sweep does not show any records
200.5
Close the current period again in AP Open next period.SetupàCalendaràAccountingàAP Accounting Periods
Next period should show Open status and last period should be Closed.
Failed
Depending on above point
Recommended