An Approach to Predict Blank Shape for Auto-Position in Multistage Sheet Metal Forming

An approach to predict blank shape for auto-position in multistage sheet metal forming

Jiang Chen, Wenliang Chen, and Guokang Du

Citation: AIP Conference Proceedings 1567, 1028 (2013); doi: 10.1063/1.4850146

View online: http://dx.doi.org/10.1063/1.4850146

View Table of Contents: http://scitation.aip.org/content/aip/proceeding/aipcp/1567?ver=pdfcov

Published by the AIP Publishing

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitation.aip.org/termsconditions. Downloaded to IP:

128.184.184.37 On: Wed, 15 Jan 2014 06:53:58

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitation.aip.org/termsconditions. Downloaded to IP:

128.184.184.37 On: Wed, 15 Jan 2014 06:53:58

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitation.aip.org/termsconditions. Downloaded to IP:

128.184.184.37 On: Wed, 15 Jan 2014 06:53:58

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitation.aip.org/termsconditions. Downloaded to IP:

128.184.184.37 On: Wed, 15 Jan 2014 06:53:58

This article is copyrighted as indicated in the article. Reuse of AIP content is subject to the terms at: http://scitation.aip.org/termsconditions. Downloaded to IP:

128.184.184.37 On: Wed, 15 Jan 2014 06:53:58