View
95
Download
0
Category
Preview:
Citation preview
ADVANCED WARNINGSYSTEMS
XP95 MANUAL CALL POINT 55100-905AMPA FireFinder™ compatible product PDS213-0050
Product Data Sheet
Features: Resettable manual call point
No glass to replace after operation
Test is by actual operation
Fast and easy installation with new ‘plug and play’ terminals
S ingle key to reset the device imple maintenance using a sand remove the fron
The XP95 Manual Call Point
t cover
Anti-tamper facility
Modern aesthetically pleasing design
The XP95 Addressable Manual Call Point (MCP) is a ‘type A’ single action, red call point. It is supplied with a standard back box for surface mount installation and is suitable for indoor use only. For flush mounting, a suitable single-gang mounting box (min 20mm depth) is required.
Description
The device is put into alarm by pressing the resettable element. A fluorescent yellow marking appears indicating that the MCP is in alarm. The alarm is transmitted via the Apollo loop to the FireFinder™ Fire Alarm Control Panel. An LED on the front illuminates when the FireFinder™ receives this alarm signal.
The XP95 MCP can be tested periodically by actual operation and reset using a test key supplied with each device. The same key is used to remove the front cover.
With the use of the resettable element there is no frangible glass to replace and resetting the device can be quickly achieved. The user must set the address for each device to ensure correct operation. No two devices can share the same address setting on the same Apollo loop. This address setting must match the configuration that has been programmed into the FireFinder™ FACP. Terminations for the XP95 MCP are clearly marked for asy installation. e
When activated, the XP95 Manual Call Point not only interrupts the polling cycle to indicate to the FACP that it has been operated, but also reports its address. Thus an alarm and its location can be reported in less than 0.2 seconds.
Loop in / loop out terminations at the XP95 Manual Call Point, make installation easy. Field wiring may be terminated to a removal plug. Links supplied with the device allows for pre-commissioning without having to install the MCP.
Item Number Description
213-0050 Manual Call Point
213-0064 Hinged cover
L+ L+ L- L-FunctionalEarth
Insert as Shown toRemove Front Cover
ContinuityLinks
GreenYellow
O N
1 2 3 4 5 6 7
0
1
ExampleAddress Setto 78
DO NOT REMOVE LABEL
Manual Call Point
Item Number: 213-0050Part No: 55100-905 AMP051104 / 2CEN54-11 (Type A)
For indoor use onlyRefer to Installation Guide MAN15110832-CPD-XXXXManufactured for Ampac by Apollo Fire Detectors Ltd
0832 010n/02
N1236
+ + - -Functional Earth / Screen
ADDRESS
01 1 2 4 8 16 32 64
LPCB
Technical
Specifications
Power supply Loop powered 17 to 28 VDC Surge Current 750 μA @ 24 VDC (2sec typical) Quiescent Current 1mA @ 24 VDC Alarm Current 4mA @ 24 VDC Compatibility FireFinder™ Apollo Loop protocol Cabling 2 core - max. size 2.5mm2
Address setting 126 Size Call Point 89H x 88W x 26.5D mm
Back box 87H x 87W x 32D mm Colour RED Approvals EN54-11
Item Numbers
PDS213-0050-2 XP95 MCP.doc Page 1
WORLD LEADER OF INNOVATIVE SOLUTIONS IN FIRE DETECTION AND ALARM SYSTEMS
Recommended