View
5
Download
0
Category
Preview:
Citation preview
Copyright
The entire contents of this instruction manual, including any future contents
updates, revisions, and specification modifications, shall remain the property of Alltek Marine Electronics Corp. (hereinafter called AMEC) at all times. Unauthorized copies or reproduces of this manual, either in part or as a whole, is prohibited. The
contents herein can only be used for the purpose subjects to this manual.
Disclaimer
The contents of this manual are well prepared by AMEC. As we are constantly
improving our products, AMEC shall incur no liability based on the contents, updates or modification of the contents, or the lack of contents in this manual.
Contact us at:
Technical Support:
Sales & Marketing:
ALLTEK MARINE ELECTRONICS CORP. V1.3.3
5F, NO.37, Ji-Hu Road., Neihu District, Taipei, 11492, Taiwan
TEL: +886 2 2627 1599
FAX: +886 2 2627 1600
www.alltekmarine.com
(Your Local Dealer/Agent Warranty Stamp)
Table of Contents
1 INTRODUCTION OF AMEC NAVIPRO ECS ........................................... 1
1.1 ECDIS ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM ........................... 1 1.2 S-57/S-63 ENC ELECTRONIC NAVIGATIONAL CHARTS INTRODUCTION .................... 1
2 NAVIPRO ECS INSTALLATION ............................................................. 2
2.1 SYSTEM REQUIREMENT .................................................................................. 2 2.2 INSTALLATION .............................................................................................. 2
3 NAVIPRO ECS USER INTERFACE ......................................................... 4
3.1 THE USER INTERFACE IN DETAIL ....................................................................... 4 3.2 MULTIFUNCTION BAR .................................................................................... 5
3.2.1 Tool Bar ...................................................................................... 5 3.2.2 Status Bar ................................................................................... 7
3.3 ALARM FUNCTION BAR .................................................................................. 7 3.4 INFORMATION BAR ....................................................................................... 8 3.5 CHART VIEW ................................................................................................ 8
3.5.1 Chart Boundary Line .................................................................. 9 3.5.2 Compass and Chart Scale Ruler .................................................. 9 3.5.3 Context Menu .......................................................................... 10 3.5.4 Inquiry Information .................................................................. 11 3.5.5 Chart Scale and Ring Circle Menu ............................................ 11 3.5.6 Information Panel .................................................................... 13
3.6 MAIN MENU ............................................................................................. 14 3.7 FUNCTION PANEL ....................................................................................... 15
3.7.1 Information Panel .................................................................... 15 3.7.2 Manager List ............................................................................ 16
4 SETTING ......................................................................................... 17
4.1 VIEW SETTING ........................................................................................... 17 4.1.1 Interface Setting ....................................................................... 17
5 CHART CONTROL PANEL ................................................................. 18
5.1 INTERFACE FUNCTIONAL OVERVIEW ............................................................... 18 5.2 CHART INSTALLATION MENU ......................................................................... 19
5.2.1 Install Permit ............................................................................ 19
5.2.2 S-57/S-63 Exchange Set Chart Installation................................ 19 5.2.3 Install the S-57 ENC Chart ........................................................ 20
5.3 CHART LIST................................................................................................ 21 5.3.1 License List ............................................................................... 21 5.3.2 S-63 Charts List ......................................................................... 22 5.3.3 System Chart List ...................................................................... 22
5.4 OTHER FEATURES ........................................................................................ 23 5.4.1 Exporting the Chart List ............................................................ 23 5.4.2 Install the Certificate ................................................................ 23
6 CHART ............................................................................................ 24
6.1 CHART SETTING .......................................................................................... 24 6.1.1 Chart More Setting ................................................................... 29
6.2 DEPTH SETTING .......................................................................................... 30 6.3 DANGER OBJECT SETTING ............................................................................ 31
6.3.1 Danger Object More Setting .................................................... 31
7 CONNECTION AND LOG .................................................................. 32
7.1 CONNECTION SETTINGS ............................................................................... 32 7.2 MESSAGES ................................................................................................ 33
7.2.1 Message Devices ...................................................................... 33 7.2.2 Log ........................................................................................... 34 7.2.3 Enable Playback Controls ......................................................... 34 7.2.4 Message Log ............................................................................ 35
8 MONITORING ................................................................................. 36
8.1 NAVIGATION TOOLS .................................................................................... 36 8.1.1 Auto-scrolling ........................................................................... 36
8.2 SECURITY TOOLS ......................................................................................... 37 8.2.1 Guard Zone .............................................................................. 38
8.3 ANCHOR WATCH ........................................................................................ 39
9 TOOLS ............................................................................................ 40
9.1 MEASUREMENT TOOLS ................................................................................ 40 9.1.1 Measuring ................................................................................ 40
9.2 EBL / VRM............................................................................................... 41 9.3 DISTANCE RINGS ......................................................................................... 41
10 OPTIONS ........................................................................................ 42
10.1 SYSTEM .................................................................................................... 42 10.2 UNIT ........................................................................................................ 43 10.3 VESSEL PROPERTIES..................................................................................... 43 10.4 TARGET PROPERTIES
(A) ................................................................................ 43 10.5 ROUTE...................................................................................................... 44 10.6 LOG PROPERTIES ........................................................................................ 44 10.7 ALARM ..................................................................................................... 45 10.8 AUDIO ...................................................................................................... 45
11 MARKER ......................................................................................... 46
11.1 MARKER MANAGEMENT .............................................................................. 47 11.1.1 Marker List ............................................................................... 47 11.1.2 Marker Information .................................................................. 47
11.2 MARKER SETTING ....................................................................................... 48 11.2.1 Marker Operations ................................................................... 48 11.2.2 Marker Function....................................................................... 48
12 ROUTE ............................................................................................ 49
12.1 ROUTE MANAGEMENT ................................................................................ 49 12.1.1 Route List ................................................................................. 49 12.1.2 Route Information .................................................................... 50 12.1.3 Route Detail ............................................................................. 50
12.2 ROUTE PLANNING ....................................................................................... 52 12.2.1 Route Operations ..................................................................... 52 12.2.2 Route Control ........................................................................... 53 12.2.3 Route Function ......................................................................... 56
13 TRACK ............................................................................................ 57
13.1 TRACK MANAGEMENT ................................................................................. 57 13.1.1 Track List .................................................................................. 57 13.1.2 Track Information ..................................................................... 57 13.1.3 Timeline ................................................................................... 58
13.2 TRACK SETTING .......................................................................................... 58 13.2.1 Track Display Setting ................................................................ 58
14 ALARM ........................................................................................... 59
14.1 ALARM CLASSIFICATION ............................................................................... 60 14.2 ALARM INFORMATION ................................................................................. 61
14.2.1 Active Alarms ........................................................................... 61 14.2.2 Alarm Detail ............................................................................. 62
15 TARGET(A)
........................................................................................ 63
15.1 TARGET SYMBOL DESCRIPTION ...................................................................... 63 15.2 TARGET INFORMATION ................................................................................. 63
15.2.1 Target List ................................................................................. 64 15.2.2 Target Search (select binoculars) .............................................. 64 15.2.3 Target Information ................................................................... 65 15.2.4 Target Chart Quick Glance Feature ........................................... 65
APPENDIX............................................................................................. 66
A.1 S-57 / S-52 ABBREVIATIONS AND ILLUSTRATIONS ............................................. 66 A.2 ABBREVIATION ........................................................................................... 70
1
1 Introduction of AMEC NaviPro ECS
AMEC NaviPro is an ECS (Electronic Chart System) navigation software which follows
the international standard ECDIS (Electronic Chart Display and Information System) supporting the chart format S-57 for hydrographic exchange or transport of digital data as well as conforming the chart display standard S-52 for displaying screen
elements, graphics, and color presentation.
NaviPro ECS supports English, Japanese, and Chinese language user-interfaces.
Throughout this manual, chapters start with (A) are only supported in NaviPro Advanced version.
1.1 ECDIS Electronic Chart Display and Information System
ECDIS is the international standard for electronic chart displaying system. The ECDIS
standard has various test requirements to validate the hardware and software qualifications of a navigational device. In summary, ECDIS defines the graphical user interface (GUI) that is displayed on an aid navigation system.
The ECDIS standards are defined and developed by IHO in collaboration with IMO (International Maritime Organization). These standards define nautical information
exchange format S-57/S-63 (Hydrographic data) and S-52 (Graphic data) specifications for chart elements, symbols, colors, and etc.
1.2 S-57/S-63 ENC Electronic Navigational Charts introduction
S-57/S-63 ENC (Electronic Navigational Chart) is the vector chart based on S-57/S-63 object categories and attributions. S-57/S-63’s spatial objects hold vector
spatial data including symbol descriptions. All these information is encapsulated in S-57/S-63 ENC.
The S-57/S-63 vector data is based on paper and raster charts with the approved nautical survey data released by the authorities. The goal is to provide the most accurate nautical information for navigation.
S-57/S-63 ENC is a collection of information exchange sets. Through AMEC NaviPro ECS, S-57/S-63 chart data is displayed and converted internally for the NaviPro’s drawing engine to achieve faster processing.
2
2 NaviPro ECS Installation
2.1 System Requirement
Before installing AMEC NaviPro ECS, please ensure PC meets the following minimum system requirements:
• Operating system: Microsoft® Windows 2000, Windows XP, Windows Vista,
Windows 7 or Windows 8/8.1 • CPU: 500 MHz or above • RAM: 128 MB or above
• Hard drive space: 100 MB or above • Resolution: 1024x768 or above • CD-ROM drive
• One available USB port
2.2 Installation
Please insert AMEC NaviPro ECS installation CD into the CD-ROM drive then double click Setup.exe to run. The installation screen appears as follows:
Figure 1 Installation (1)
Once entered installation wizard, please follow the given installation instruction.
Click “Next” to start software installation. When finished, the installation procedure will prompt to continue with the WibuKey installation wizard. The wizard will install WibuKey Runtime Kit software, as shown in the screenshot beneath.
3
Figure 2 Installation (2)
Please follow the wizard to finish all installation procedure. When installation completes, it creates AMEC NaviPro ECS program shortcut. The following screen
shows the installation is successfully completed.
Figure 3 Installation (3)
To start running the software, the AMEC NaviPro ECS USB dongle needs to be plugged in first. Find an available USB port and firmly plug in the dongle. The
system will automatically detect the USB driver to authorize the software. Wait a
4
short moment until the driver is engaged. Then you may continue to click “Finish” to start AMEC NaviPro ECS. Please refer to the user manual for further operation
instructions.
The dongle is required to be plugged-in to unlock AMEC NaviPro ECS.
3 NaviPro ECS User Interface
3.1 The User Interface in detail
AMEC NaviPro ECS interface has six main sections:
Figure 4 Interface Functional Overview
Multifunction Bar
The Multifunction Bar has two functions; it displays
the Status Bar and the Toolbar. Usually the Multifunction Bar only displays the Status Bar, which is composed of latitude, longitude, COG, SOG and
HDG. The Toolbar on the other hand is hidden and can only be un-hidden when the cursor is over the Status Bar. The Toolbar will slide out when
mouse-over the Status Bar. In the Toolbar, you will find common functions such as magnifying glass, divider, color scheme modes, etc.
A
B
D
E
F
C
A
5
Alarm Function Bar With the function enabled, it shows alarm warnings.
Alarm warnings are displayed in Red.
Information Bar Provides current system time, the mouse cursor’s latitude and longitude on the chart.
Chart View Chart displays detailed information and enables quick
object searching.
Main Menu Dropdown menu provides NaviPro settings and functions.
Function Panel System preference settings enable user to perform
functions and operations.
3.2 Multifunction Bar
The Multifunction Bar has two functions; it displays the Status Bar and the Toolbar.
3.2.1 Tool Bar
The toolbar provides commonly used shortcuts to functions and tools. See screenshot below:
Figure 5 Toolbar
Icon/Name Description
Zoom In/Out
Provide user a comfortable chart viewing scale
Divider
Measure distance and bearing between two points.
EBL/VRM
Measure distance and bearing, provide azimuth information, from own ship point of view.
Add Marker
Quickly create a marker on the chart.
B
C
D
E
F
6
Create Route
Quickly establish new route on the chart.
Chart
Orientation Modes
Provide different chart view orientations. There are three modes available to choose. Click the icon allows rotating through all
modes or simply use the dropdown list to select directly.
True North up Course up Head up
Auto-Scroll Mode
Enable chart auto-scrolling as ship sails. Three auto-scroll modes
are available providing different level navigation alertness. Click the icon allows rotating through all modes or simply use the dropdown list to select directly.
Look Ahead Auto Vessel Centered Scroll Off
Show
Distance Rings
Enable on/off option to view ship distance contour lines. When enabled, value on the current ring distance shows on Chart
Scale/Ring Circle Menu.
Color Scheme
Switching color schemes for different weather or sunlight conditions for best viewing experiences. There are 5 color schemes
for comfortable viewing experiences. Click the icon allows rotating through all modes or simply use the dropdown list to select directly.
Day (Bright)
Day (White)
Day (Black)
Dusk Night
7
Display
Category
User may select one of viewing modes to view chart. Each mode displays objects differently. There are 3 viewing modes to view
chart details. Click the icon to rotate through all modes or simply use the dropdown list to select the display style.
Base Display Standard Display Other
ENC Text Enable
Button
Enable text description for places, lighthouses, etc.
3.2.2 Status Bar
The status bar provides a quick overview of your vessel navigation status, such as
position (latitude and longitude), COG, SOG and HDG information.
Figure 6 Status Bar
3.3 Alarm Function Bar
Alarm warning is categorized into seven different categories. With the alarm
function enabled, alarm warnings are shown on the “Alarm Function Bar” with an acknowledge button on the right for user to click-on and thus acknowledging the existence of the alarm.
For more details, please refer to the chapter "Alarm".
8
3.4 Information Bar
The Information Bar displays the current system information, including the mouse
cursor’s current latitude and longitude information, scale, and system time.
Figure 7 Information Bar
System Time Machine system time.
Mouse Cursor’s Latitude and Longitude Cursor’s corresponding latitude and longitude in chart.
Scale
It provided map scale ratio.
3.5 Chart View
Display chart content and its information, including S63 chart’s expiration date
(indicated by the border color), scale basic information, north arrow, context menu (mouse’s right click), and search function to find information on chart.
Mouse Cursor’s Latitude and Longitude
System Time
Scale
9
3.5.1 Chart Boundary Line
The chart boundary line uses different border colors to indicate expiration date
status on the enclosed map data. Charts that are within the valid period have boundary borders indicated in blue color. If charts are expired but still within a 30 day-period, the boundary lines are indicated in orange. Lastly, if charts are expired
more 30 days, the boundary lines are shown in red.
Figure 8 Chart Boundary Line
Chart Lifespan Chart Boundary Line Color
Valid within the time limit Blue
Within 30 days after the expiration Orange
Expired Red
3.5.2 Compass and Chart Scale Ruler
The Compass arrow is displayed on the chart’s upper right corner; it displays the orientation of the chart in reference of the top of the screen. Chart scale symbol is
shown at the chart’s left lower corner. The value underneath this symbol indicates the scale being used.
Figure 9 North Symbol and Chart Scale
10
3.5.3 Context Menu
Right mouse click brings up the context menu. In addition to query additional
function, the context menu provides different functions depending on the type of object.
Figure 10 Context Menu
Inquiry Function All object types can be searched and returned results include information
on this position, including chart, object, etc.
Route Function The route context menu provides route, waypoint quick management
functions, such as deletion, moving, and more. The route information function provides a quick access to the route management options.
Marker Functions
The marker context menu provides marker deletion and moving functions. The marker information function provides a quick access to the marker management options.
3
2
1
2
1
2
1
3
11
3.5.4 Inquiry Information
The inquiry information displays the selected object’s attributes. The information is
grouped by object and chart attributes.
Figure 11 Inquiry Information
Object Information Shows ENC object information. Select any chart object to see information about this particular object.
Chart Information Shows ENC chart information. Select any chart object to see information about this particular object.
3.5.5 Chart Scale and Ring Circle Menu
It shows Chart Scale and vessel ring circle. The status bar provides quick scale
selection and information on current scale in nautical miles.
It provides a quick selection
The menu provides a fast scale switching for the Chart Scale and Ring Circle
function between Chart Scale unit distance from the circle and the proportion of the ship, and displays information about the current proportion chart screen; able directly through the pull-down menu to select the picture you want to display
charts proportion to switch units of knots
12
Figure 12 Inquiry Information
13
3.5.6 Information Panel
Information panel display information and provide simple setups.
Properties Shows marker and route options and properties. As when this option is activated, any click on a selected marker or route brings up information
panel on the function panel.
The information panel contains the object’s related information and also provides quick setting functions. Results from functions can be viewed directly.
Figure 13 Information Panel
AIS Properties When this option is enabled you can simply click the vessel on the chart.
The vessel details will be display on the side. As shown below:
Figure 14 AIS Details
14
3.6 Main Menu
The main menu provides chart management and setting.
Figure 15 Main Menu View
ENC Setting Provides ENC chart display settings.
View Setting
Provides chart and interface display options. The following tools can be enabled or disabled, Toolbar, Information Bar, and latitude/longitude lines.
Monitoring Tools
Provide monitoring navigational functions (e.g.: auto-scroll, warning area, anchor position detection).
Generals Tools
Provide measurement tools and aids (e.g.: measurement, EBL / VRM, distance ring)
Language
Different languages are available for user preference. (Different language are available to choose from)
Chart Control Panel
The chart management interface supports information exchange on standard S-57 and S-63 file formats. The Chart Control Panel provides quick chart installation onto AMEC NaviPro ECS software. Basic charts information
can be found here.
Connection and Log To connect external units and run Log.
Options System related settings: display size, display format ENC text font / size changes as well as latitude and longitude.
About Display AMEC NaviPro ECS copyright information.
15
Help Open and access to the user manual.
3.7 Function Panel
Tools / function / management settings are all in one panel for easy and quick
operation.
3.7.1 Information Panel
The Information Panel offers quick access too many key functions to easily perform and operate such functions. Click on the to hide or unhide the Function Panel
Figure 16 Functional Panel
Target List(A) Display all target vessels in a list format and their respective details.
Marker Marker management and planning settings.
Route
Route management and planning.
Track Custom track management and planning.
Function Panel Quick Access Button
16
3.7.2 Manager List
Marker, Route and Track management configuration settings are grouped into three
sections under Manager List.
Figure 17 Manager List
List Title
Display list name and on the top right shows total number of listed items.
Function List functions: delete/ import / export.
List Content List items are listed by rows. Click on the first column to hide / show List items. By definition, Markers do not have navigation properties.
Icon
Name Enable item Disable item Show navigation setting
Hide navigation setting
Figure 18 Icon Explanation
Function Column
List Content
List Title
17
4 Setting
4.1 View Setting
View Settings feature is accessible from the main menu. When accessed, the view setting is displayed on Function Panel, providing additional chart display and interface adjustment options:
Figure 19 View Setting
4.1.1 Interface Setting
Theme The four color themes are available to select from: Colorful, White Tone,
Blue Tone, and Yellow Tone.
Show Information Bar Hide /show Information Bar.
Display GPS Satellite Signal Display GPS Satellite Signal function provides received GPS signal statuses.
Figure 20 Display GPS Satelite Signal
18
5 Chart Control Panel
Chart management support S-57 information exchange standard file management
for installation and removal. This interface enables chart quick installation to NaviPro ECS system. Chart map data information, and number of charts installed
can be found under this panel. Interface Functional Overview
Chart configuration management interface is divided into three main parts:
Figure 21 Interface Functional Overview
Chart Installation Menu Provide the installation on S-57/S-63 charts.
Chart List
Shows charts map data / chart license information. The columns provide current chart and statistical information. Chart delete function and information mode change function are both available above this list.
Information It display installed Chart statistic data
Other Features
Provide information and tools to install charts. The certificate installation enables changing certificate information (default IHO.CRT); display registration information and obtain the required USER PERMIT information to purchase charts; export chart list file in HTML format for easier viewing.
D
C
A B
A
B
C
D
19
5.2 Chart Installation Menu
5.2.1 Install Permit
Use menu S-57/S-63Exchange Set License Installation for this menu. The license
file (e.g. PERMIT.TXT) is installed to the system after the installation is complete. To view the licensing status, please refer to the “permission list” chapter.
5.2.2 S-57/S-63 Exchange Set Chart Installation
Use the menu S-57/S-63Exchange Set Chart Installation for this menu. Install S-57/S-63Exchange Set to the system. Please note that the license file and the certificate must be correctly installed in system before chart installation. If installed
incorrectly, a warning or error message like one below will appear.
Figure 22 S-57/S-63 Exchange Set Chart Installation (1)
When install S-57/S-63Exchange Set, choose direct file path to disc or folder S-57/S-63 Exchange Set. Commonly, it is the folder containing ENC_ROOT. Once
accessed successfully, the installation process continues.
Figure 23 S-57/S-63 Exchange Set Chart Installation (2)
During chart installation, the screen switches to installation progress page followed by map data conversion process. S63 Chart installation and map data conversion
success and failure result are shown in “More Information” after the process is complete.
20
5.2.3 Install the S-57 ENC Chart
Select menu S-57 ENC Chart Installation to install S-57 map data to the system.
This feature supports S-57 information exchange standard file installation and provides two types of importing methods. One method is through S-57 ENC Catalog installation and the other method is direct S-57 ENC map data installation. During
chart installation, the screen switches to installation progress page followed by map data conversion procedures. Installation result is shown after it completes.
Figure 24 Install the S-57 ENC Chart
21
5.3 Chart List
The dropdown list provides three types of information, Cell Permit List, S-63 Chart
List, and SENC List.
5.3.1 License List
Shows the current license information in the system. There are mainly three license
statuses, legal, expire within 30 days, and expired; expired license file will be listed in red. License can be removed through the delete button. Statuses are reflected through map border indicator. See Chapter 3.5.1 Chart Boundary Line.
Figure 25 License List
22
5.3.2 S-63 Charts List
Displays all installed S-63Exchange Set charts.
Figure 26 S-63 Chart List
5.3.3 System Chart List
Show installed charts in system. Charts can be deleted through the delete function.
Figure 27 System Chart List
23
5.4 Other Features
5.4.1 Exporting the Chart List
Use this feature to export current chart list in HTML file format.
5.4.2 Install the Certificate
Use this feature to install certificate from purchased chart into system. If the certificate is not IHO signed, a warning appears.
Figure 28 Install the Certificate (1)
Information on the successfully installed certificates can be viewed.
Figure 29 Install the Certificate (2)
24
6 Chart
Through the Functional Panelopen ENC Setting then Chart. When selected, the
setting page will be seen on the function panel, providing detailed chart setting option.
Figure 30 Chart
6.1 Chart Setting
Display Category
Base: displays land area, depth area, and shoreline.
Standards: In addition to the basic display, the important navigation objects are
shown: Buoys, aids to navigation, restricted zones.
Other: Display all chart items (excluding lighting symbols) like submarine communication cables, land roads.
25
Color Scheme
Day (Bright): suitable to use under strong daylight.
Day (White): suitable to use under normal daylight.
Day (Black): suitable to use under cloudy daylight.
Dusk: suitable for use in the dusk low light.
Night: suitable for use at night hours.
Symbol Style
Electronic Chart Symbols: S52 standardized electronic chart symbols are relatively
simpler than average paper chart symbols. They are fast and easier to distinguish objects.
Paper Chart Symbols: S52 standard paper chart symbols, generally same as paper
chart symbols.
Figure 31 Symbol Chart
Line Style
Simple lines: S52 specification simple lines to represent the region.
Symbol lines: S52 specification symbol lines to represent the region.
Figure 32 Line Style
26
Scale Table
IHO: according to IHO standards, defined scales are used to display map data.
Custom: provide custom display scale to display map data.
Figure 33 Scale Table
Chart Display Mode:
True North up: chart will display True North Up mode.
Head Up: chart will display Head Up mode.
Course Up: chart will display Course Up mode.
Filter Mode (there are four different type of filters mode):
1. Non-Filter applied
2. Filter out symbols
3. Filter out descriptions
4. Filter out symbols and descriptions
Use SCAMIN
S-57 ENC charts object properties to automatically determine the natural scale in
the display.
Figure 34 Use SCAMIN
27
Show Contour Labels
Turn on / off the display, isobaths value function.
Figure 35 Show Contour Labels
Show Lights
Turn on / off the light symbols.
Figure 36 Show Lights
Show Light Sectors
Turn On/Off Show Light Sectors function. Dotted line represents the actual distance (of the emittance of the light). As shown below in figure 35.
28
Figure 37 Light Casting
Show ENC Text Turn on / off display ENC text function. Click configuration for more detailed
ENC text display settings.
Figure 38 Show ENC Text
Text Language English / regional language / regional language by country ENC text. For
"regional language by country" option, only the selected country would show the ENC’s default regional language text.
Country
Available when selection is regional language by country, this feature displays the country’s ENC regional language.
Auto-Select Country
Available when selection is regional language by country, the system automatically selects a language based on most installed charts.
29
6.1.1 Chart More Setting
Clicking for more setting options.
Figure 39 Chart More Setting
Isolated Danger Display
Symbol Size: provides symbol resizing functions for isolated danger objects, large/ medium/ small.
OBSTRN: enable/disable OBSTRN (obstruction) function. Turning symbols on/off.
UWTROC: enable/disable Underwater, Awash rock symbols. Turning symbols on/off.
WRECKS: enable/disable Wreck symbols. Turning symbols on/off.
Meta Object Display
M_NSYS: When Other is selected for Display Category, it provides option to
enable/disable Navigational system of marks. Turns symbols on/off.
M_QUAL: When Other is selected for Display Category, it provides option to enable/disable Quality of Data. Turns symbols on/off.
Other
DIAMOND1: enable/disable depth symbols that are unsafe for navigation, and option to display chart boundary lines. Turns symbols on/off.
Reset All Setting
Restored to the original preset settings.
30
6.2 Depth Setting
Water Depth Color
Two depth scheme settings are available for accuracy, Two Color and Four Color modes. Each depth display scheme shows details differently.
Figure 40 Depth Setting
Two Color: three regions are lined by depth, dry line, and shoreline.
Four Color: five regions are lined by deep contour, safety contour, shallow contour, and drying line.
Contour Depth
By user preference, the safety depths can be defined. Click on Configuration to enter preference depth values.
Figure 41 Contour Depth
The depth settings for, Shallow Depth, Safety Depth, and Deep Depth, can
define five depth regions, deep depth, depth, medium depth, shallow, very shallow, and seashore. The first two are safe for navigation.
Safety Contour
The setting slider allows tuning the thickness of the safety line.
31
6.3 Danger Object Setting
Settings for Guard Zone monitoring range and route’s XTE Alarm Width range for
danger objects.
Detection Level
The chart provides a variety of object types, degree of risk is divided into high /
medium / low monitoring levels. The higher the level, the more danger objects are listed.
Low: detects only basic types of danger objects, Depth, Land Area, Underwater
rock/ awash rock. Since this level only monitor and detects basic danger object types, it is recommended choosing medium or above for safe navigation.
Medium: in additional to basic danger objects, most common danger objects are
included, such as beacon, buoy, and obstruction.
High: detects all types of danger objects. Any object that is dangerous to navigation is considered.
Color Style Three danger categories are classified by colors: depth, height, and collision.
6.3.1 Danger Object More Setting
Click on icon for further settings.
Figure 42 Danger Object More Setting
Symbol Size Symbols resize option for danger objects. Available sizes are large / medium / small.
Line Width Line Width provides options to adjust line thickness on line type symbols. Options are, very fine / fine / medium / coarse / very coarse, five types of
width options.
Reset All Setting Return to original factory preset
32
7 Connection and Log
This window is used to setup, Log and Play recorded messages for devices that is
connected to NaviPro ECS.
7.1 Connection Settings
Figure 43 Connection
Connection List
Add connection to new devices and also provide a list of connected devices.
Settings Three types of connection are provided, Serial Port, TCP and UDP. Serial port
must be set in the device name, port and baud rate; TCP and UDP shall be provided with the device name, IP address and port. Click OK after setting is completed, it will automatically check for the device name. The system will
check for errors, if no error occurs, the link will be added to the list of device on the Connection List.
Note: only one GPS input can be set as the primary GPS source.
33
7.2 Messages
Device Information page. Provides On / Off "Auto Refresh" option; when
auto-refresh function is enable, it will simultaneously displayed information relating to external devices.
7.2.1 Message Devices
AIS connection can be configured either manually or automatically. Manual setting function allows custom configuration on port and baud rate. The automatic function provides auto-configuration on external AIS device.
Figure 44 Message Devices
34
7.2.2 Log
Log recording function. Used it to store sailing records and use the playback panel,
to play back your sailing history records.
Figure 45 Message Log
7.2.3 Enable Playback Controls
Enable/disable playback control functions. The playback control appears at the
lower right of the chart. In the playback control, the folder allows replaying pre-recorded log. While playing, they are ten playing speeds (1~10) are available for selection. During
playback, pause, stop, replay functions are accessible at anytime. Loop button allows continuous repeating playback. See screenshot below:
Figure 46 Enable Playback Controls
Log Folder Playback Speed
Loop
Close
35
7.2.4 Message Log
Replay the recorded Message Log.
Figure 47 Replay Message
36
8 Monitoring
Select Functional PanelMenu then "Monitoring". Monitoring settings will show
on top of the function panel and provide monitoring tools during navigation. See screenshot below:
Figure 48 Monitoring
8.1 Navigation Tools
Chart auto-scroll settings are for system to stay and lock on vessel movement.
8.1.1 Auto-scrolling
When auto-scroll function is turned on, chart will automatically scrolls in sync with
the ship. When the ship sails passes the auto-scroll frame, chart scrolls accordingly to stay locked. This feature eases monitoring vessel’s surroundings.
37
Figure 49 Auto-scrolling
Mode Two modes, Look Ahead/ Vessel Centered, are available for auto-scrolling
preferences.
Show Frame Show / Hide the frame boundaries for auto-scroll.
Frame Size Use the setting slider to adjust the size of auto-scroll frame.
View Range
This option is only available when auto-scroll mode is Look Ahead. The slider is used to adjust the viewable navigation region ahead.
8.2 Security Tools
Available security tools are Guard Zone and Anchor Watch tools.
Boundary
38
8.2.1 Guard Zone
With this feature is turn on, NaviPro automatically detects guard zone for safety
navigation. As danger objects are detected, alarm would be triggered for notification.
Figure 50 Guard Zone
Guard Zone
Provide show / hide Guard Zone.
Sensing Range Provide small/medium/large three customer preset for fast configuration.
Sensing Ahead Time Sensing Ahead Time is the time-based furthest traveling distance of the Guard Zone that system monitors.
Sensing Ahead Width Set the width of Guard Zone area that system monitors.
Sensing Near Width
Extended Guard Zone width near the vessel.
Sensing Ahead Time
Sensing Near Width
Danger object highlighted
Sensing Ahead Width
39
8.3 Anchor Watch
During anchor monitoring, the vessel is the monitored mode. If the vessel drifts
away from the defined anchor perimeter, Anchor Watch alarm is triggered with the anchoring ring flashing.
Figure 51 Anchor Watch
Max Drift Adjust monitoring perimeter size to allow maximum drifting distance.
Color Style
Custom color selection for the monitoring circle.
40
9 Tools
Select through functional panel"Tools". The settings will be show on function
panel providing navigation assistance.
Figure 52 Tools
9.1 Measurement Tools
Available measuring tools to measure two points on chart and supports vessel’s EBL / VRM.
9.1.1 Measuring
The Divider distance measuring tool is accessible through Measure menu or can be
access through Tool Bar’s icon. When this tool is started, left click on chart to initiated the start point and then move mouse to any location to measure the distance between. To end divider, click again on the Divider icon or right click
anywhere on chart.
Figure 53 Measuring
41
9.2 EBL / VRM
EBL / VRM Set option turns on this feature. When EBL/VRM is on, it uses the vessel
as the starting point for measuring. Moving mouse to any location shows the distance and bearing from the vessel.
Figure 54 EBL / VRM
Active EBL
Enable/disable EBL display function.
Active VRM Enable/disable VRM display function.
9.3 Distance Rings
With vessel centered in the distance rings, each ring indicates distance from the
vessel. All rings have equal distance from one another. With these rings, it is easier to determine the distances of objects from the vessel.
Figure 55 Distance Ring
Show Distance Ring
Enable/ disable Distance rings. The shortcut button Show Distance Rings is directly accessible from Tool Bar.
Color Style (Click Select Box)
Color setting for Distance Ring.
42
10 Options
Access NaviPro system settings.
Figure 56 System
Menu Settings for NaviPro ECS. Click on the Menu for more
detail settings
Details Settings Further settings are provided here.
10.1 System
Monitor Size Set the actual size of the viewing screen. The system will automatically adjust the objects on the chart to the right size. A variety of viewing sizes
are to select. The default monitor size is 17". If there is no matching size, a custom size can be defined by user preference.
ENC Font Size
Text size adjustment settings for text on chart. A custom font and size can be selected.
Position Format
Provide longitude and latitude displaying format. Different formats are available to choose from.
A
B
A
B
43
Time Zone Change time zone.
Default File Path Setting Change default system file path.
10.2 Unit
Settings for preferred speed and distance units.
Speed
Knots / Kilometers per Hour / Miles per Hour
Distance Nautical Miles / Kilometers / Meters / Statutory Miles / Feet
Height Meters / Feet
Depth
Meters / Feet / Fathoms
10.3 Vessel Properties
Advanced settings for vessel properties.
Vessel Setting Settings for vessel name, size, call sign, vessel dimensions, and draught
value. Setting vessel depth auto-syncs with chart safety depth value.
Symbol Style Additional settings for vessel symbol, including Show Outline, Show Course
Line, Show Vector Stabilization, and Show Time markers.
10.4 Target Properties (A)
Settings for Target
Target Display
Settings to turn On or Off the display functions of: Show Class A, Show Class B, Show AtoN, Show SART, Show Base Station and Show SAR
AIS Symbol Style
To enable / disable AIS boat icon
Time Out Set AIS signal lost time tracking and delete the AIS target after lost target
time frame is reach. SART target are not deleted
Active Range It enables or disables the Active Range feature. When this feature is enable,
the approximating vessels are highlighted when it enter the predetermine range of own vessel.
44
Active Target To enable or disable target details when it enter own vessel Active Range.
The details that an user can enable or disable are: Course Line, Heading Line and All Targets Active.
10.5 Route
Settings for route properties.
Plan Speed The expected plan speed.
XTE Alarm Width
XTE warning alarm setting.
Arrival Circle
It provides Arrival Circle adjustments. Arrival Circle is an imaginary circle
that provided the user a visual cue that the boat have arrived at or passes a waypoint.
Range: adjust the size of the arrival circle in nautical miles.
Delay Notification: the time delay when arrival circle move to the next waypoint.
10.6 Log Properties
Provides log recording condition options and record settings.
Log Recording Enable/disable recording function. The function automatically started as when system detects input information.
Record Incoming GPS Log Record received GPS information in the log.
Record Incoming AIS Log Record received AIS information in the log.
Record Incoming Other Log
Record input information from other devices into the log.
File Maximum Record Time Sets log maximum time limit a log can hold. During recording, the system
creates a new log whenever a log reaches its limit.
File Maximum Keeping Period Provides the maximum period that logs are kept on system before
removing.
45
10.7 Alarm
NaviPro alarm settings.
Safety Alert Alerts can be enabled/ disabled through this setting.
Enable Depth Alarm: base on water depth defined value; the function detects water depth area that are too shallow for navigation.
Enable Height Alarm: base on vessel height, the function detects objects that lower
than the defined height value. Such objects are bridges, power lines, cables, etc.
Enable Collision Alarm: detect and alert all possible collidable objects or areas. Such objects or areas could be buoys, rocks, etc.
Enable AIS Alarm(A): Enable / disable AIS alarm also provide CPA and TCPA timeout setting.
Device Alarm settings
External alarms can be enabled /disabled through this setting.
Enable Device Failed Alarm: given device connected to enable or disable alarm warning for any connected device that have failed.
Enable Low GPS Signal Alarm: if device setting for signal await time. Given GPS device connected, alarm activates as system is unable to obtain a fixed GPS location within the time period.
Enable Checksum Error Alarm: given device connected, if information check sum error is detected, alarm activates.
Monitoring Alert
Provides navigation route XTE enabling/disabling function.
Alert Setting Settings for alert duration. This duration time defines how long an alert
would stay in active once it is triggered.
10.8 Audio
Settings for sound related configurations.
Alarm Sound
Enabling / disabling of alarm sound.
46
11 Marker
Select functional panel to access this menu. The menu settings are shown
on function panel providing marker management and planning functions.
Figure 57 Marker
47
11.1 Marker Management
The marker management function page is divided into two sections, the Marker List
and Marker Information.
11.1.1 Marker List
Marker List shows all current markers in NaviPro. Use toolbar to
remove/import/export selected markers. Click the icon in first column to hide or unhide marker. Detailed descriptions refer to chapter "Interface Manager List".
11.1.2 Marker Information
Marker Information shows the details of a selected marker in Marker List.
The icon by the Marker Information provides proper settings, such as naming and icon changing.
Figure 58 Marker Information
Show Name Provide enable / disable function the marker name on chart screen.
Name
Set custom the marker name.
Icon Set a custom marker icon.
Description Leave a description for this marker.
48
11.2 Marker Setting
Marker setting page is group into two sections, Marker Operations and Maker
Function. To cancel activated marker function, right mouse click or click directly Cancel on the chart status bar.
11.2.1 Marker Operations
Common marker operations are listed here. As shown below, available functions are Add, Remove, and Move.
Figure 59 Marker Options
Add
Create a new Marker on chart. The other easy way of adding marker is through Toolbar’s Add Marker icon . As follows by either solution, click
a position on chart to add the new marker.
Delete To remove a marker, select it with mouse and then hit Delete.
Move Relocate marker to different position on chart.
11.2.2 Marker Function
Provides marker import / export functions.
Figure 60 Marker Function
Import To import a marker, select file path and choose the marker file that is with
extension .amk. If the marker is already existed in NaviPro, the system will prompt for deletion before importing.
Export
To export a marker, select a file path and assign a name for the marker file. Marker files have .amk file extension.
49
12 Route
Select functional panel Menu to access this menu. The menu settings are
shown on function panel providing route management and planning settings.
Figure 61 Route
12.1 Route Management
Route management function page is divided into three parts, Route List, Route Information, and Route Detail.
12.1.1 Route List
Route List displays all routes in system. Use the function column to select routes for deletion/ import / export operations. Use first column to enable /disable route
status. For more information, refer to chapter "Interface Manager List".
Under route planning and navigation the route delete and hide feature is turn off.
50
12.1.2 Route Information
Route Information shows details on the current selected route in Route List. Use the
Route Information icon to view Route Properties and attributes settings.
Figure 62 Route Information
Name Custom route naming
ETD ETD (Estimated Time of Departure) estimates ETA( Estimated Time of Arrival) using configured Plan Speed.
Description Enter descriptions and remarks for this route for references.
12.1.3 Route Detail
Route Detail shows route and waypoints details on a selected route on Route List. Information includes waypoint locations, route distances, bearing, speed, and time.
51
Figure 63 Route Detail (1)
Each waypoint / route attribute properties can be modified. Click on Route Detail
Icon for Waypoint Properties settings / Legline Properties settings.
Figure 64 Route Detail (2)
Waypoint Properties
Show Name: Hide /show waypoint names.
Name: Custom waypoint naming.
Description: Enter waypoint description /remarks for user references.
Legline Properties
Plan Speed: Set planned sailing speed. This value is used with ETD to estimate ETA time.
XTE Alarm Width: Set route XTE alarm distance used on route navigation.
Waypoint: Pos. (Location)
Route:
D/B (range / azimuth) S/T (speed / time)
52
12.2 Route Planning
Route planning function page has three sections: Route Operations, Route Control,
and Route Function. Right mouse click or click Cancel on the chart status bar allows canceling the route planning functionality.
12.2.1 Route Operations
Provides route common operations, such as route creation/deletion, waypoint moving, inserting, and, deletion function.
Figure 65 Route Operations
Create Route
This function establishes a new route. Same operation can be done on
toolbar’s Icon for quick setting. To start new route, move mouse to new waypoint location, left click mouse to add a new waypoint. Repeat the
procedure to create new waypoints. To end, right click on mouse or click Cancel on the chart status bar.
Delete Route
Delete a selected route on chart.
Move Waypoint Move a selected waypoint to any other place on chart.
Insert Waypoint Insert waypoint into the current selected route.
Delete Waypoint
Delete a selected waypoint in a route. The route will automatically link the waypoints.
Add to End
Add a new waypoint to the end of a selected route and repeat adding waypoints if necessary. To end, right click on mouse or click Cancel on the chart status bar.
53
Add to Start Add a new waypoint to the start of a selected route and repeat adding
waypoints if necessary. To end, right click on mouse or click Cancel on the chart status bar.
12.2.2 Route Control
Route Control provides common control settings. Settings include route checking on dangerous objects and waypoints.
Figure 66 Route Control
Route Planning
The select function is applied to waypoints for planning. In route selection, system determines route automatically with a selected waypoint. As route encounters intersection, user needs to select the next waypoint for the
route to continue. This process stops when there are no more waypoints to route.
Figure 67 Select
Active Waypoint
Intersection
Select Next waypoint
Select Initial waypoint
54
Deactivated Use Deactivated function to cancel activated route.
Check Route Use Check function to detect objects that may endanger navigation. Dangerous objects are highlighted.
Figure 68 Check Route
Dangerous Object Check Route function results dangerous objects highlighted. Information on these objects are divided into three sections.
Danger Legline List: All route segments. Route segments or entire route can be selected.
Danger Object List: Displays the list of all dangerous objects on route.
Danger Object Information: Details on the selected dangerous object on list.
Dangerous objects highlighted
55
Figure 69 Dangerous Object
Active Waypoint As a navigation tool during navigation, the active waypoint shows the
closest waypoint on the activated route to the boat. System automatically switches next active waypoint during navigation.
Figure 70 Active Waypoint
Deactivate
Use Deactivate function to cancel navigation on selected route.
Active Waypoint
Guideline
Navigation information
56
12.2.3 Route Function
Route import / export functions.
Figure 71 Route Function
Import To import a route, select file path and choose the route file that is with extension .art. If the route is already existed in NaviPro, the system will
prompt for deletion before importing.
Export To export a route, select a file path and assign a name for the route file.
Marker files have .art file extension.
57
13 Track
Select functional panelMenu for this menu. This menu is shown on
function panel providing track management and tools.
Figure 72 Track
13.1 Track Management
Track Management feature page is divided into three parts, Track List, Track
information, and Timeline.
13.1.1 Track List
Track List displays all current track entries in the system. Track List allows deleting,
importing, exporting on tracks. Use the first column to display/ hide tracks. Please refer to chapter "Interface Manager List".
13.1.2 Track Information
Information on the selected track in Track List is displayed for reference. Click the
Icon right by the track information for track properties.
Figure 73 Track Information
Name Custom Track naming.
58
13.1.3 Timeline
The slide button allows accessing track recording. Dragging the slide control or
clicking +/- buttons to see a specific time in the recording. Use the position button
to locate and view the position on the chart.
Figure 74 Timeline
13.2 Track Setting
Track setting function page contains Track Display Settings.
13.2.1 Track Display Setting
Provides track displaying options.
Figure 75 Track Display Setting
Show Time Markers
Show / Hide function of time marked on Track.
Track Width Use the slide control to set track line thickness.
Corresponding date / time
Ship information Function column
Track start time Track end time
Slide control
59
14 Alarm
Under a good GPS fix, NaviPro automatically monitors navigation safety. When
navigation safety warnings are detected, the alert board on chart’s left upper corner displays warnings counts by the warning types and warnings are shown the warning marquee. If a warning presents a high degree of risk, the warning
continues flashing on the warning board and the warning status bar prompts to remind user on the risk to take necessary action.
Figure 76 Alarm
Alert Information
Alarm Function Bar
Enable/disable Warning Detection
Confirmation Button
60
14.1 Alarm Classification
Warnings types are classified by different colors on the chart. The colors are red
(device risk), orange (safety risk), and yellow (monitoring risk). By the degree of the risks, there are three warning alarms with different sound pitches: long, normal, short. The warnings that require user immediate attention will continually sound till
user’s acknowledgement.
Information on warning types is listed below:
Alert Category Description Alarm Pitch
Confirm Required
Lost GPS
Sensor Alarm
Device type GPS connection failed. Long
pitch Yes
Low Gps Sgnal Alarm
Device type
GPS was connected, but cannot
obtain of GPS fix for a period of
tiem.
Long
pitch Yes
Checksum Error
Alarm
Device type
When connected with devices,
alert prompts when check code
error occurs in messages.
Short
pitch No
Depth Alarm
Safety type
NaviPro alerts when guard zone
detects an area with water depth
is less than the configured boat
safety depth value.
Normal
pitch No
Height Alarm
Safety type
NaviPro alerts when guard zone
detects an object (bridge, power
line, etc) with a height that is
lower than the configured boat
safety height value.
Short
pitch Yes
Collision Alarm
Safety type
NaviPro alerts when guard zone
detects an object (rock, buoy)
that is possible in a collision
course.
Short
pitch Yes
CPA/TCPA
Alarm Safety Type CPA and TCPA alarm warning
XTE Alarm Monitoring
type
NaviPro alerts as vessel is sailing
away beyond the defined time
the XTE alarm distance of the
route (XTE Alarm Width).
Normal
pitch No
Anchor
Watch Alarm
Monitoring
type
With Anchor Watch enabled,
NaviPro alerts as boat drifting
away from the maximum drift
distance (Max Drift).
Short
pitch Yes
61
14.2 Alarm Information
Click on Alarm Function Bar to access warning information and details. The
information is divided into Active Alarms and Alarm Detail. A highlighted alarm in Active Alarms is shown in Alarm Detail.
Figure 77 Alarm Information
14.2.1 Active Alarms
Displays the current activated alarms. Alarms such as depth alarm, height alarm, collision warning are displayed in tree structures. Click the + sign to expand the list.
Figure 78 Active Alarms
Alert list
Expand list
62
14.2.2 Alarm Detail
Alarm Detail displays the information of highlighted alarm in Active Alarms.
Information includes alarm type, date and time, and the subject’s latitude and longitude position.
Figure 79 Alarm Detail (1)
When alarm types are Depth Alarm/ Height Alarm/ Collision Alarm, the details of the hazardous object causing alert such as object type, name, latitude and longitude position, chart displaying scale, and risk reason.
Figure 80 Alarm Detail (2)
63
15 Target(A)
15.1 Target Symbol Description
Symbol for each target displayed on the NaviPro is described below:
AIS Target
AIS Dangerous Target. (Dotted Line signify the Course Line and Solid Line signify the Heading Line)
AtoN (Real)
AtoN (Virtual)
Base Station
SART/MOB
SAR
ARPA Target
ARPA Dangerous Target (Dotted Line signify the Course Line)
ARPA Query Target
Lost Target
Selected Target
15.2 Target Information
Select functional panelMenu "Target" to access this menu. The menu settings are shown on function panel providing Target information and search function.
64
15.2.1 Target List
The Target List panel will display all targets within the receiving range of the vessel.
The list can be sorted by ID or name by clicking ID or name menu sorting arrow.
Moreover, left clicking will select that target, and by double clicking the same target, it will bring that target up and place it in the center of the chart. If there are signals
of the ship, the ship's information will be displayed at the information window. Target that is in danger of collision will be displayed in red. Shown below:
Figure 81 Target Window
15.2.2 Target Search (select binoculars)
Select binocular icon to turn on the search function. Type-in the name or ID into the search field to start searching. Partial string search capability is also supported; simply type-in the first initial letter of the name or ID number to commence
searching. Moreover, you can use the Up/Down arrow to select the previous or the next in line as shown below:
Figure 82 Target List Search Bar
65
15.2.3 Target Information
Target information can be display by selecting each Targets found in the Chart or
from the target list panel. More target details information can be display simply by checking the “Details” check box found in Target Information menu bar as shown below:
Figure 83 Information Window
15.2.4 Target Chart Quick Glance Feature
By selecting active target present on the chart it will display the selected target vessel name (or MMSI) and speed. If a “L” is present in front of the vessel name, it
means this target has a length greater than 160 meters; if there is a "F" word present in front of the speed, it signify this target has a speed of 20Kn or greater as shown below:
Figure 84 Quick Glance
66
Appendix
A.1 S-57 / S-52 Abbreviations and Illustrations
ENC text information
Acronym stands for significance
bn = Beacon (INT1)
by = Buoy
clr = Overhead clearance
clr cl = clearance closed
clr op = clearance open
sfclr = safe clearance
No = Number (INT1)
Plt = Pilot
Prod = offshore production (INT1)
LtV =light vessel
Varn = magnetic variation
ch = Communication channel
NMT = not more than "CLEARING BEARING"
NLT = not less than "CLEARING BEARING"
Natural and man-made features
Icon Description Icon Description
Temple Church, chapel
Mosque Single building
Chimney
Hill or mountain top
Dome Tower
Water tower Flare stack
Monument Windmill
Wind motor Mast
Radar scanner Radio, television tower
Dish aerial Tank
67
Yacht harbor, marina Fortified structure
Mine, quarry Flagstaff, Flagpole
Tank farm Refinery
Wind generator farm Quarry
Obstruction
Icon Description Icon Description
Wreck showing any portion of
hull or superstructure at level of
chart datum
Non-dangerous wreck, depth
unknown
Dangerous wreck, depth
unknown land as a point at small scale
Offshore platform
Installation buoy, paper-chart
Weed, kelp Sand waves
Fish stakes Flare stack
Fish farm
Fish haven
Fishing ground Underwater hazard with depth
greater than 20 meters
Square or rectangular daymark,
simplified Underwater hazard which covers
and uncovers
Obstruction, depth not stated Obstruction in the intertidal
area
Obstruction which covers and
uncovers
Arrowhead for own ship vector
for course and speed over the
ground
Dangerous underwater rock of
uncertain depth Area of wrecks or obstructions
68
Traffic Routes
Icon Description Icon Description
One-way deep water
route centerline, not
based on fixed marks
Two-way deep water
route centerline, not
based on fixed marks
Deep water route
centerline, direction not
defined in the data
One-way deep water
route centerline, based
on fixed-marks
Two-way deep water
route centerline, based
on fixed marks
Regulated recommended
route centerline, details
not defined
Regulated one-way
recommended route
centerline, based on
fixed marks
Regulated two-way
recommended route
centerline, based on
fixed-marks
Ferry route
Regulated one-way
recommended route
centerline, not based
on fixed marks
Regulated two-way
recommended route
centerline, not based
on fixed marks
Fairway with one-way
traffic in direction
indicated
Recommended traffic
direction between parts
of a traffic separation
scheme, or for ships not
needing a deep water
route
Recommended route
between parts of a traffic
separation scheme, or
for ships not needing a
deep water route, with
the direction not
specified in the data
One way lane of a traffic
separation scheme, with
the direction not
defined in the data
Reciprocal traffic
directions in a two-way
route of a traffic
separation scheme
Two-way route of a
traffic separation
scheme, with the
direction not defined in
the data
Radio calling-in point for
traffic in one direction
only
69
Radio calling-in point for
traffic in both directions
Radio calling-in point
whose direction is not
known
Point symbol for traffic
precautionary area
Traffic separation scheme
Inshore traffic zone
Precautionary area
Archipelagic sea lane Seabed area
Deep water route part
Two-way route part
Ferry route
Fairway
Anchorage area as a
point at small scale, or
anchor points of mooring
trot at large scale
designated anchor berth
for a single vessel
Floating hazard to
navigation
Anchorage area
Restricted area,
anchoring, prohibited
Restricted area, fishing
prohibited
Restricted, entry
prohibited
ESSA (environmentally
sensitive sea area) area
PSSA (particularly
sensitive sea area) area
Caution area, caution
area, a specific caution
note applies
Military practice area Administration area
Cargo transshipment
area, area with minor
restrictions or
information notices
70
A.2 Abbreviation
AIS Automatic Identification System
BRG Bearing
COG Course Over Ground
CPA The Closest Point of Approach
ECDIS Electronic Chart Display and Information System
ECS Electronic Chart System
ENC Electronic Navigational Chart
ETA Estimated Time of Arrival
ETD Estimated Time of Departure
GPS Global Positioning System
IMO International Maritime Organization
IHO International Hydrographic Organization
RNG Range
SENC System Electronic Navigational Chart
SOG Speed Over Ground
TCPA The Time to Closest Point of Approach
XTE Cross Track Error
Recommended