View
219
Download
1
Category
Preview:
Citation preview
No-Slack® minor repair KIT-RPR-6000LFor SLTPLUNT/SLTPL6000/SLTPL7000/SLTPL7000CC top plates (left release)
KIT-RPR-6000RFor SRTPLUNT/ SRTPL6000/ SRTPL7000 top plates(right release)
No-Slack® major repair KIT-RX-67NTLFor SLTPLUNT/SLTPL6000/SLTPL7000/SLTPL7000CC top plates (left release)
Air cylinder identification for air actuated top platesSee page 3
Air cylinder identification for air slide bracketsSee page 3
CYL-
COM
P
CYL-
XAW
X
CYL-
5AW
S-2
CYL-
610-
3
CYL-
LWO-
LWI
KIT-
AA-5
092L
or R
KIT-
AA-6
000L
or R
800-874-9780 • www.fifthwheel.com2
Top plate rebuild kitsContents
Special toolsNo-Slack® major rebuild kit for No-Slack® NT/6000/ 7000/7000CC top plates
KIT-RX-67NTL
(left release only)
For kit information on obsolete products go to www. fifthwheel.com
Choose Support at top menu and choose Obsolete products
Fontaine offers special tools for your fifth wheel to help your repairs go fast and easy.
Special tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2Top plate rebuild kits . . . . . . . . . . . . . . . . . . . . . . . Page 2Air cylinders for slide brackets . . . . . . . . . . . . . . . Page 3Air cylinders for air actuated top plates . . . . . . . . Page 3Fifth wheel repair kits . . . . . . . . . . . . . . . . . . . . . . Page 3No-Slack® NT 6000/7000/7000CC top plate kits . Page 4H5092/X5092 series top plate kits . . . . . . . . . . . . Page 5CD 700 series top plate kits. . . . . . . . . . . . . . . . . . Page 6Choose the right fifth wheel . . . . . . . . . . . . . . . .Page 7-8Brackets and mounts . . . . . . . . . . . . . . . . . . . .Page 9-17No-Slack® preventive maintenance . . . . . . . . . . Page 18No-Slack® jaw and wedge adjustment . . . . . . . . Page 19Frequently asked questions . . . . . . . . . . . . .Pages 20-23 Troubleshooting flow charts . . . . . . . . . . . . . . . . . . . . .24
Buy genuine Fontaine® fifth wheel parts
No-Slack minor rebuild kits for No-Slack® NT/6000/7000/ 7000CC top platesKIT-RPR-6000L (left release)KIT-RPR-6000R (right release)
No-Slack® test kingpinKIT-NOSLACK-KP
5092 seriesspring installation
tool MSC-710
Your only source for No-Slack® technology
800-874-9780 • www.fifthwheel.com
Item No. Description Part Number Quan.
Flat Washer, 1/2” I.D. 1-3/8” O.D., Plain
Hex Head Bolt, 1/2” -13 x 1-1/2 BLT-302-13 1 Grade 5
Pull Handle PUL-6000L 1
Secondary Lock LAT-6000L 1
Hex Head Bolt, 1/2” -13 x 1-3/4”, BLT-302-14 1 Grade 5
Bumper BPR-6000* 1
Operating Handle OPR-6000 1
Timer TMR-6000L 1
Hair Pin Cotter PIN-336-1 1
Hex Head Bolt, 1/2" - 13 x 2-1/4", BLT-302-67 1 Grade 5
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33 33
34 34
18
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33 33
34 34
18
NO-SLACK®II ASSEMBLY
Before rebuilding the assembly, check to make sure that there are no cracks in the cross members or other components. Also check bracket pin holes to ensure they are not worn oversize (pins should fit snugly). Under no circumstances should a fifth wheel be repaired or used if any component (cross member, saddle bearing, etc.) is cracked.
Step 3: Unbolt and remove the bumper from the operating handle.
Step 3: Insert the operating handle (Item Number 23) and bolt to the pivot mount. Use the provided bolt, lock nut, 2 washers, hairpin cotter and the bushing supplied in the kit (Item Numbers 26, 25, 17, 13, 9). Note the orientation of the bolt. The bushing used in this step is the largest of the three bushings in the bag.
Step 2: Unbolt and remove the secondary lock from the operating handle.
Step 2: Insert the timer (Item Number 24) and the timer spring (Item Number 11).
Step 1: Remove the sec-ondary lock spring and the bumper spring. Remove the pull handle cotter pin and washer then, slide out the pull handle.
Step 1: Always assemble the parts around a 2” kingpin or a 2” diameter shaft. Insert the jaw first and then the wedge below it (Item Number 12). Grease the jaw and wedge on the top and bottom.
Step 4: Unbolt the operating handle from the pivot mount and remove.
Step 4: Install the bumper (Item Number 22) and bolt to the operating handle. Use the bolt, 2 washers, lock nut and the bushing supplied in the kit (Item Numbers 21, 17, 10, 9). Note the orientation of the bolt. The bushing used in this step is the smallest of the three bushings in the bag. After installing the bumper, check to make sure that it can pivot freely.
Step 7: Pull out the cotter pin and then unscrew the rod from the wedge stop nut. Remove the wedge stop rod.
Step 7: Install the wedge stop rod (Item Number 4). Use the wedge stop rod nut and spring, as well as the 2 washers and a cotter pin (Item Numbers 1, 2, 3, 5). Note that the spring is placed between the 2 washers and the cotter pin is inserted through the rod behind the first washer. The rod is then screwed into the nut. Close the fifth wheel several times with a standard 2” kingpin tool. With the lock closed, adjust the wedge stop rod so that the end is 1/4 inch from the wedge.
Step 5: Remove the timer spring and the timer.
Step 5: Install the secondary lock (Item Number 20) and bolt to the operating handle. Use the bolt, 2 washers, lock nut and bushing supplied in the repair kit (Item Numbers 18, 17, 13, 9). Note the orientation of the bolt. The bushing used in this step is the medium sized bushing of the three in the bag.
Step 6: Remove the jaw and wedge.
Step 6: Install the pull handle (Item Number 19). Use the washer and cotter pin supplied in the repair kit (Item Numbers 17, 5). Attach the handle spring (Item Number 7) to the secondary lock and the bumper spring (Item Number 6) to the bumper. These springs are supplied in the repair kit. Now open and close the wheel to ensure that it works properly. Ensure the fifth wheel is properly lubricated before opening and closing the wheel.
NO-SLACK®II DISASSEMBLY
All parts are to be discarded after disassembly. Degrease fifth wheel before installing new For 6000, 7000, & Ultra NT Series fifth wheels (procedures are the same). Refer to exploded view of assembly to identify item numbers and parts. Caution: Always wear safety glasses and do not stand directly over parts while disassembling or assembling wheel.
Tools Required: 1-1/16 inch wrench (wedge stop rod) 3/4 wrench and socket (bolts) Pliers (cotter pins)
Item No. Description Part Number Quan.
Wedge Stop Rod Nut NUT-319 12 1
Flat Washer, 5/8", Plain WSH-304-5 2
Wedge Stop Rod Spring SPR-317 1
Wedge Stop Rod ** ROD-1108 1
Cotter Pin, 3/16” x 1” PIN-165 2
Bumper Spring SPR-374 1
Handle Spring SPR-338 1
Bushing, 5/16” BSH-629 1
Hex Lock Nut, 1/2” - 13, Grade “C” NUT-303-9 3
Bushing BSH-1225 1
Timer Spring CD-SPR-236 1
Step Jaw and Wedge Set WED-6000L 1
Bushing, 7/16” BSH-115 1
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33 33
34 34
18
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33 33
34 34
18
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
24 24
25 25
26 26
27 27
28 28
29 29
30 30
31 31
32 32
33 33
34 34
18
NO-SLACK®II PARTS LIST
Scan on your smart-phone or tablet to view
rebuild video!
LT-103 rebuild 9X25.indd 1 4/10/13 1:06 PM
QR code links to instructional video – have questions answered
and repair with confidence
Seven kits combined in one to save you time and money. Complete instructions for disassembly and reassembly – don’t waste time wondering what to do. Parts are arranged in the sequence you need them – the part you need is within reach.
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 3
7000 and 6000 fifth wheel kitsMinor rebuild kit road side release .....KIT-RPR-6000LMajor rebuild kit road side release .......KIT-RX-67NTLRebuild kit curb side release ............. KIT-RPR-6000RWedge-stop rod .................................. KIT-ROD-1108Bracket pin (one-piece bushing) ............KIT-PIN-191Bracket pin (two-piece bushing) .............KIT-PIN-LLBSecondary lock ........................... KIT-LAT-6000L or RSpring kit .................................................KIT-SPRINGBumper kit ..................................KIT-BPR-6000L or RTimer .........................................KIT-TMR-6000L or ROperating handle ................................ KIT-OPR-6000Pull handle ..................................KIT-PUL-6000L or RAir actuated ..................................KIT-AA-6000L or R
7000CC fifth wheel kitsMinor rebuild kit road side release .....KIT-RPR-6000LMajor rebuild kit road side release .......KIT-RX-67NTLWedge-stop rod .................................. KIT-ROD-1108Bracket pin (one-piece bushing) .............KIT-PIN-191Bracket pin (two piece bushing) ..............KIT-PIN-LLBSecondary lock ...................................KIT-LAT-6000LSpring kit .................................................KIT-SPRINGBumper kit .........................................KIT-BPR-6000LTimer ................................................ KIT-TMR-6000LOperating handle ................................ KIT-OPR-6000Pull handle ......................................... KIT-PUL-6000LAir actuated .........................................KIT-AA-6000LClean Connect plates .....................CCR-Plates-L or R
Air cylinders for air slide brackets
Air cylinders for air actuated top plates
Air line kits
CYL-COMP
CYL-XAWX
CYL-5AWS-2
CYL-610-3
CYL-LWS
CYL-LWO-LWI
7/8" diameter holes
1/2" diameter holes
7/8" diameter holes
9/16" diameter hole
.98" diameter hole
.41" diameter hole
1/2" diameter holes
1/2" diameter holes
Kit to complete the in-dash installation.
Kit to connect the air actuated fifth wheel or fifth wheel air sliders to the air system.
12-1/4"
12-1/4"
24-3/8"
24-3/8"
23-7/8"
21.30"
17-3/8"
15"KIT-AA-5092L or R
KIT-AA-6000L or R
Fifth wheel repair kits
Buy genuine Fontaine® fifth wheel parts
Your only source for No-Slack® technology
No-Slack® NT fifth wheel kitsMinor rebuild kit road side release .... KIT-RPR-6000LMajor rebuild kit road side release ...... KIT-RX-67NTLWedge-stop rod ..................................KIT-ROD-1108Bracket pin ............................................KIT-PIN-UNTSecondary lock .................................. KIT-LAT-6000LSpring kit ................................................ KIT-SPRINGBumper kit ........................................ KIT-BPR-6000LTimer ................................................KIT-TMR-6000L Operating handle ................................KIT-OPR-6000Pull handle .........................................KIT-PUL-6000LAir actuated ........................................ KIT-AA-6000L
800-874-9780 • www.fifthwheel.com
H5092 and X5092 fifth wheel kitsRebuild kit road side release ..............KIT-RPR-5092LRebuild kit curb side release ............. KIT-RPR-5092RWedge-stop rod .................................. KIT-ROD-1108Bracket pin (H5092 models) ....................KIT-PIN-191Bracket pin (X5092 models) ................... KIT-PIN-XHDPull handle ...........................................KIT-PUL-5092Timer ...........................................KIT-TMR-134L or RBumper kit (H5092 models) ........KIT-BPR-5092L or RBumper kit (X5092 models) ..........KIT-BPR-131L or ROperating handle ........................OPR-5000-SL or SR
KIT-AIR-DASH
KIT-AIR-COIL
800-874-9780 • www.fifthwheel.com4
32
34
37
39
38
4142
1
11
19
23
4746
48
49
23
24
5
8
9
76
10
12
13 14
1516
172021
2220
18 24
25
26
3130
29
27
28
33
3335
36
40
43
4244
45
Clean Connect plates can only be used with the 7000CC fifth wheel top plate.
No-Slack® NT plates only use the following bracket pin kit
7 per side
Rebuild kit (KIT-RPR-6000L or R)Item Description Quantity 10 Bumper spring 1 11 Handle spring 1 37 Timer spring 1 38 Step jaw 1 39 Wedge 1 21 Bushing, 7/16" 1 34 Bushing, 5/16" 1 43 Bushing, 1 1/4" 1 23 32 41 Hex lock nut, 1/2" - 13 3
Spring kit (KIT-SPRING)Item Description Quantity 10 Bumper spring 1 11 Handle spring 1 37 Timer spring 1
Air actuated kit (KIT-AA-6000L or R)This kit includes the parts mounted to the fifth wheel. If you are upgrading from manual to air actuated you will also need KIT-AIR-DASH which includes the parts required to complete the in-dash installation.Item Description Quantity 12 Hex head bolt 1 13 Hex lock nut 1 14 Air cylinder 1 15 Mini-matic jumbo exhaust valve 1 16 Hex lock nut 1 17 Flat washer 1 18 Shoulder bolt 1
KIT-AIR-DASH
KIT-AIR-COIL
Clean Connect plate kitsThese kits can only be used with the 7000CC Clean Connect fifth wheel top plate.Item Description Quantity(CCR-PLATES-R) 46 Right CC plate 1 48 Flat washer 7 49 Hex lock nut 7(CCR-PLATES-L) 47 Left CC plate 1 48 Flat washer 7 49 Hex lock nut 7
Pull handle kit (KIT-PUL-6000L or R) 24 Pull handle 1 25 Flat washer, 1/2" I.D. 1 26 Cotter pin, 3/16" x 1" 1
Wedge-stop rod kit (KIT-ROD-1108) 1 Wedge-stop rod nut 1 2 Flat washer, 5/8" I.D. 2 3 Wedge-stop rod spring 1 4 Wedge-stop rod 1 5 Cotter pin, 3/16" x 1" 1
Bumper kit (KIT-BPR-6000L or R) 32 Hex lock nut, 1/2" - 13 1 33 Flat washer, 1/2" I.D. 2 34 Bushing 1 35 Hex head bolt, 1/2" - 13 1 36 Bumper 1 10 Bumper spring 1
Timer kit (KIT-TMR-6000L or R) 37 Timer spring 1 40 Timer 1 41 Hex lock nut, 1/2" - 13 1 Hair pin cotter (not pictured) 1
Operating handle kit (KIT-OPR-6000) 21 Bushing, 7/16" 1 34 Bushing, 5/16" 1 43 Bushing, 1 1/4" 123 32 41 Hex lock nut, 1/2" - 13 3 42 Flat washer, 1/2" I.D. 2 44 Hex head bolt, 1/2" - 13 1 45 Operating handle 1 Hair pin cotter (not pictured) 1
Bracket pin kit (KIT-PIN-191) 6 1-piece bushing 2 7 Bracket pin 2 8 Bracket retainer pin 2 9 Cotter pin 2
Bracket pin kit (KIT-PIN-LLB) 27 2-piece bushing 2 Pairs 28 Bracket pin 2 29 Bracket retainer pin 2 30 Cotter pin 2 31 Bracket liner 2
Secondary lock kit (KIT-LAT-6000L or R) 11 Handle spring 1 19 Hex head bolt, 1/2" - 13 1 20 Flat washer, 1/2" I.D. 2 21 Bushing, 7/16" 1 22 Secondary lock 1 23 Hex lock nut, 1/2" - 13 1 26 Cotter pin, 3/16" x 1" 1
No-Slack® NT/6000/7000/7000CC series top plate kits
5351
54
52
50
Bracket pin kit (KIT-PIN-UNT) 50 1-piece bushing 2 51 Bracket pin 2 52 Bracket retainer pin 2 53 Cotter pin 2 54 Bracket Liner 2
KIT-PIN-191(pair)
KIT-PIN-LLB(pair)
Use if on LWB, ATB, MTB, BSM, PMA mount
Use if mounted to LWB, MTB, BSM, ATB, PMA
Use if on a AWB, MWS, AWX, PSA, XAWX mount
Use if mounted to AWB, MWS, AWX, PSA, XAWX
Parts required to connect the air actuated fifth wheel or fifth wheel air sliders to the air system.
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 5
Rebuild kit (KIT-RPR-5092L or R)Item Description Quantity 12 Step jaw 1 13 Wedge 1 14 Jaw and wedge spring 2 15 Cotter pin, 1/4" x 3" 2 19 Bumper spring 1 22 Bushing, 5/16" 1 28 Bushing, 7/16" 1 24 Hex lock nut, 1/2" - 13 1 26 Hex lock nut, 1/2" - 13 1
Pull handle kit (KIT-PUL-5092)Item Description Quantity 10 Leaf spring 1 11 Self tapping screw 1 17 Pull handle 1 18 Cotter pin, 3/16" x 1" 1 21 Flat washer, 1/2" I.D. 1
Wedge-stop rod kit (KIT-ROD-1108)Item Description Quantity 1 Wedge-stop rod nut 1 2 Flat washer, 5/8" I.D. 2 3 Wedge-stop rod spring 1 4 Wedge-stop rod 1 5 Cotter pin, 3/16" x 1" 1
Bumper kit (KIT-BPR-5092L or R)Item Description Quantity 25 Bumper 1 19 Bumper spring 2 22 Bushing 5/16" 1 24 Hex lock nut, 1/2" - 13 1 30 Hex head bolt, 1/2" - 13 1 29 Flat washer, 1/2" I.D. 1 28 Bushing 7/16" 1 26 Hex lock nut, 1/2" - 13 1
Timer kit (KIT-TMR-134L or R)Item Description Quantity 16 Timer 1 22 Bushing 5/16" 1 24 Hex lock nut, 1/2" - 13 1 28 Bushing 7/16" 1 26 Hex lock nut, 1/2" - 13 1
Operating handle kit (KIT-OPR-5000-SL OR SR)Item Description Quantity 27 Operating handle 1 20 Hex head bolt, 1/2" - 13 1 22 Bushing 5/16" 1 23 Flat washer, 1/2" I.D. 1 24 Hex lock nut, 1/2" - 13 1 30 Hex head bolt, 1/2" - 13 1 29 Flat washer, 1/2" I.D. 1 28 Bushing 7/16" 1 26 Hex lock nut, 1/2" - 13 1
Bracket pin kit (KIT-PIN-191)Item Description Quantity 6 1-piece bushing 2 7 Bracket pin 2 8 Bracket retainer pin 2 9 Cotter pin 2
Bracket pin kit (KIT-PIN-XHD)Item Description Quantity 6 1-piece bushing 2 7 Bracket pin 2 8 Bracket retainer pin 2 9 Cotter pin 2
1
10
19
23
23
2
4
5
8
8
9
9
7
7
6
6
11
14
14
15
15
12
13
16
17
2021
22
18
24
25
26
30
29
27
28
H5092/X5092 series No-Slack® top plate kits
Use on AWB, PSA, FMA mounts
Use on XAWX, XPSA mounts
Note: For Xtra® heavy duty models choose KIT-BPR-131L or R
800-874-9780 • www.fifthwheel.com6
Rebuild kit (KIT-RPR-S500)Item Description Quantity 4 Jaw spring 1 7 Cotter pin, 3/16" x 1" 3 9 Pull handle spring set 1 15 Bushing, 7/16" 1 16 Hex head flanged bolt, nut 1 17 Flat head socket, 5/8"-11 x 3-1/2", grade 5 1 18 Jaw and wedge set 1 19 Bushing 1 21 Flat washer, 5/8", plain 1 22 Hex lock nut, 5/8" -11, grade "B" 1 23 Cotter pin, 5/32" x 1" 1 24 Flat washer 3/4", plain 1 25 Clevis pin, 3/4" x 3" 1 28 Wedge-stop rod guide 1
Lock pin kit for 700 (KIT-CD7-LOCKPIN)Lock pin kit for 600 (KIT-CD6-LOCKPIN)Item Description Quantity 10 Lock pin 1 11 Hair pin cotter 1 12 Chain 1
Wedge-stop rod kit (KIT-CD-ROD)Item Description Quantity 1 Wedge-stop rod 1 2 Wedge-stop rod nut 1 3 Wedge-stop rod spring 1
Wedge-stop rod guide kit (KIT-CD-STOP)Item Description Quantity 26 Hex lock nut, 3/8" -16, grade 5 2 27 Wedge-stop rod guide 1 28 Hex head bolt, 3/8" -16 x 1", grade 2 2
Handle kit for 700 (KIT-CD-7HDL)Handle kit for 600 (KIT-CD-6HDL)Item Description Quantity 7 Cotter pin, 3/16" x 1" 3 10 Lock pin 1 11 Hair pin cotter 1 12 Chain 1 13 Handle grip 1 14 Pull handle 1 15 Bushing, 7/16" 1 16 Hex head flanged bolt, nut 1 17 Flat head socket, 5/8"-11 x 3-1/2", grade 5 1 19 Bushing 1 20 Operating handle 1 21 Flat washer, 5/8", plain 1 22 Hex lock nut, 5/8" -11, grade "B" 1 23 Cotter pin, 5/32" x 1" 1
Bracket pin kit (KIT-CD-PIN-224)Item Description Quantity 5 Bracket pin 2 6 Bracket bushing 2 7 Cotter pin, 3/16" x 1" 2 8 Bracket retainer pin 2
1
11
10
21
20
25
23
4 5
58
89
7
7
7
6
6
13
12
16
17
1415
18
19
22
2324
16
27
26
28
CD 700/600 series custom duty top plate kits
Custom Duty Assemblies Custom Duty Service PartsSLCD7FM5750* . . .CD700 with bracket for stationary mountingSLCD7PA6125* . . . .CD700 with a 6.125" plate mountCD7AWB675024 . . .CD700 with a 6.75" air slide bracket and 24" slide rail*Some welding required.
SLTPLCD700 . . . . . CD700 replacement fifth wheel top plateBKTCDPLT. . . . . . . Bracket and plate for the SLCDPA6125BKTCD . . . . . . . . . Bracket for the SLCD7FM5750CDBKTAWB6PT . . . CD air slide bracket 6.75" heightCDASYAWB624 . . . 6.75" CD AWB bracket with a 24" CD slide railCDSLR24B . . . . . . 24" CD side railCYL-COMP . . . . . . AWB air cylinderKIT-AWB-WEDGE . Locking wedge (pair)
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 7
No-Slack® 6000 series (Driver side; SLTPL6000 • Passenger side; SRTPL6000 • Air Actuated; AATPL6000)
50,000 pounds vertical load. 150,000 pounds drawbar pull.The innovative 6000 series fifth wheel is designed for standard and moderate duty appli cations. It features the patented self-adjusting No-Slack® locking mechanism with a positive secondary lock that can only be released by pulling the handle. A safety trigger eliminates the possibility of false couplings to prevent dangerous high hitching.
No-Slack® NT (Driver side; SLTPLUNT • Air Actuated; AATPLUNT)
50,000 pounds vertical load. 150,000 pounds drawbar pull.The new No-Slack® NT is designed for 100% on-highway standard duty applications. The stamped steel fifth wheel features the patented self-adjusting No-Slack® locking mechanism with a positive secondary lock that can only be released by pulling the handle. A safety trigger eliminates the possibility of false couplings to prevent dangerous high hitching. The pull force required to open the lock is only 65 lbs. The No-Slack® NT also features savings of up to 50 lbs or more over competitive products–helps fleets offset heavy 2010 emission system components. Optional air actuation with in-cab air release (operates only when parking brake is engaged). Rated for on-highway use only, including tankers. Only weighs about 228 lbs. Only use on LWO, LWI, ASB, APB or SMB mounts.
No-Slack® 7000 series (Driver side; SLTPL7000 • Passenger side; SRTPL7000 • Air Actuated; AATPL7000)
55,000 pounds vertical load. 150,000 pounds drawbar pull.The 7000 series offers all the benefits of our 6000 series, but in a cast design rather than pressed steel. It features the patented self-adjusting No-Slack® locking mechanism with a positive secondary lock that can only be released by pulling the handle. A safety trigger eliminates the possibility of false couplings to prevent dangerous high hitching. 7000 series is also available as a blocked fifth wheel in a variety of sizes to cover more frameless dump applications.
No-Slack® 7000CC series Clean-Connect (Driver side; SLTPL7000CC • Air Actuated; AATPL7000CC)55,000 pounds vertical load. 150,000 pounds drawbar pull.The 7000CC series Clean-Connect™ offers all the benefits of our 7000 series fifth wheels plus the added benefit of a grease free top plate surface. With Clean-Connect™ technology the fifth wheel no longer requires grease to lubricate between the top plate surface and the trailer coupling plate. This eliminates the labor costs, materials and downtime associated with greasing the top plate surface.
Choosing the right fifth wheel – top plate styles
No-Slack® X5092 Series (Driver side; SLTPLX5092 • Passenger side; SRTPLX5092)
75,000 pounds vertical load. 200,000 pounds drawbar pull.The X5092 Series fifth wheel is designed for severe service applications. It offers the same great features as the H5092 Series, plus additional steel reinforcement for even greater capacity.
No-Slack® H5092 Series (Driver side; SLTPLH5092 • Passenger side; SRTPLH5092 • Air Actuated; AATPLH5092) 62,500 pounds vertical load. 150,000 pounds drawbar pull.The H5092 Series fifth wheel is designed for applications such as logging, chip hauling and end dump trailers. This rugged fifth wheel uses a patented self-adjusting No-Slack® locking mechanism. Special steel cross members reinforce this wheel to reduce damaging fifth wheel flex under heavy loads.
800-874-9780 • www.fifthwheel.com8
Duty class restrictionsStandard duty Weight: Less than 95,000 lbs (43,000 kgs) gross combination weight (GCW)
Road type: 100% on-highway application on maintained concrete or asphalt roads.
Travel type: More than 30 miles between each stop.
Axle limitation: Maximum number of towed axles equals 2.
Moderate duty (on-highway) Weight: Less than 115,000 lbs (52,000 kgs) gross combination weight (GCW)
Road type: 100% on-highway application on maintained concrete or asphalt roads.
Travel type: No minimum mileage between stops.
Axle limitation: Maximum number of towed axles equals 4.
Moderate duty (off-highway) Weight: Less than 115,000 lbs (52,000 kgs) gross combination weight (GCW)
Road type: Less than 10% off-highway application on maintained concrete, asphalt, gravel or crushed rock roads.
Travel type: No minimum mileage between stops.
Axle limitation: Maximum number of towed axles equals 4.
Severe duty (on-highway) Weight: More than 115,000 lbs (52,000 kgs) gross combination weight (GCW)
Road type: Less than 10% Off-Highway application on maintained concrete, asphalt, gravel or crushed rock roads.
Travel type: No minimum mileage between stops.
Axle limitation: No axle limitations
Severe duty (off-highway) Weight: More than 115,000 lbs (52,000 kgs) gross combination weight (GCW)
Road type: Any off-highway application on all road types including non-maintained roads.
Travel type: No minimum mileage between stops.
Axle Limitation: No axle limitation.
Special All logging, mining and oil field applications applications: fall into this category regardless of anticipated weight, road type or number of axles.
With the Fontaine Fifth Wheel complete product line you can easily select the perfect fifth wheel for your application. We offer top plates and mounting options in a wide variety of sizes to handle even the most demanding applications.
To specify the right fifth wheel for your application two factors must be considered: load capacity and service conditions.
“Weight” refers to the amount of weight that a fifth wheel can handle. “Road type” refers to the operating environment and the type of equipment used in an application. “Travel type” refers to mileage between stops.
You don’t choose a top plate based on “weight” only. Consider service conditions because a heavy load pulled on a paved road places less stress on a fifth wheel than a lighter load pulled in severe off-highway conditions.
For more information on top plate selection please refer to LT-076: Application guide available at fifthwheel.com. Choose “Support and then choose “Choosing the Right Fifth Wheel.” If you need further assistance contact Fontaine Parts Connection at 800-874-9780.
Choosing the right fifth wheel
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 9
LWB Parts Item Description Quantity 1 Rear slide stop 2 2 Lower bracket bushing (pr.) 2 3 Upper bracket bushing (pr.) 2 4 Bracket liners 2 5 Slide bracket (see slide bracket chart at right) 1 6 Slide rail (see slide rail chart) 1 7 Flat head bolt, 1/2"-13 x 1-3/4" 4 8 Spacer bushing 4 9 Flat washer, 1/2" I.D., 1-3/8" O.D., plain 4 10 Hex nut, lock 1/2"-13, low profile 4 11 Linkage, LWB 2 12 Locking wedge, left 1 13 Locking wedge, right 1 14 Hex head bolt, 3/8” 16 x 1-1/4”, grade 5 2 15 Bushing 2 16 Flat washer, 3/8" I.D.,1" O.D., plain 2 17 Hex nut lock, 3/8-16 2 18 Hex head bolt, 1/2"-13x1-1/4”, grade 5 2 19 Air cylinder CYL-COMP 1 20 Spring 2 21 Flat washer, 3/8”, fender 2 22 Flat washer, 1/2” I.D., 1" O.D., plain 2
LWB light weight air slide bracket
Air slide bracket Mounted Item Part Number Height2 to 5 and 7 to 21 BKTLWB6PT 6-3/4" 2 to 5 and 7 to 21 BKTLWB7PT 7-1/4" 2 to 5 and 7 to 21 BKTLWB8PT 8-1/4" 2 to 5 and 7 to 21 BKTLWB9PT 9-1/4" 2 to 5 and 7 to 21 BKTLWB10PT 10-1/4"
Rebuild kit (KIT-LWB)Item Description Quantity 2 BSH-109 2 3 BSH-172 2 4 LNR-107 2 7 BLT-101-4 4 8 BSH-115 4 9 WSH-104-4 4 10 NUT-103-6 4 11 LOC-388 2 12 LOC-347-1 1 13 LOC-347-2 1 14 BLT-102-77 2 15 BSH-316 2 16 WSH-104-2 2 17 NUT-103-17 2 18 BLT-102-11 2 19 CYL-COMP 1 20 SPR-327 2 21 WSH-104-21 2 22 WSH-104-3 2
Slide rails Slide Mounted Items Part Number Travel Length1 to 6 SLRLWB12 12" 32" 1 to 6 SLRLWB16 16" 38" 1 to 6 SLRLWB24 24" 44" 1 to 6 SLRLWB36 36" 55" 1 to 6 SLRLWB48 48" 67"
15
15
7
7
11
11
12
1314
7
14
8
8
10
1010
10
9
8
8
9
9
9
16
16
17
17
18
18
19
20
20
22
21
22
7
1
1
2
2
3
3
4
4
5
6
Other kits for LWBRebuild kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-LWBLocking wedge kit for LWB . . . . . . . . . . . . . . . . . . . . . . . . KIT-LWB-WEDGEAir cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-COMPAir cylinder connection kit . . . . . . . . . . . . . . . . . . . . . . . . . KIT-AIR-COILAir installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-AIRBushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSH-LLBMounting bolt kit (up to 24" slide travel) . . . . . . . . . . . . . . KIT-SLD-1824Slide limit blocking kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-SLS-LWB
Bracket pin kit (KIT-PIN-LLB) 2 3 2-piece bushing 2 Pairs Bracket pin 2 Bracket retainer pin 2 Cotter pin 2 4 Bracket liner 2
800-874-9780 • www.fifthwheel.com10
LWO light weight outboard slide
LWO Parts Item Description Quantity 1 Slide rail 1 2 Rear slide stop 2 3 Slide bracket (see slide bracket chart ) 1 4 Bracket Bushing 2 5 Air Cylinder 1 6 Locking Wedge 2 7 Hex Bolt, 3/8-16 x 1.25" 2 8 Spacer Bushing 2 9 Lock Nut, 3/8-16 2 10 Flat Washer, 1/2" 2 11 Hex Head Bolt, 1/2-13 x 1.00 2
Other kits for LWO
Air cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-LWO-LWIAir cylinder connection kit . . . . . . . . . . . . . . . . . . . . . . . . . KIT-AIR-COILAir installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-AIRLocking wedge kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-LOC-LWOBushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSH-3000Mounting bolt kit (up to 24" slide travel) . . . . . . . . . . . . . . KIT-SLD-1824
1
2
2
4
5
6
7
8
9
9
10
11
8
7
6
4
Air slide bracket Mounted Item Part Number Height3 , 4 and 5 to 11 BKTLWO6PT 6-3/4"3 , 4 and 5 to 11 BKTLWO7PT 7-3/4"3 , 4 and 5 to 11 BKTLWO8PT 8-3/4"
Slide rails Slide Items Part Number Travel Length2 & 3 SLRLWO12 12" 31"2 & 3 SLRLWO16 16" 35"2 & 3 SLRLWO24 24" 43"2 & 3 SLRLWO36 36" 55"2 & 3 SLRLWO48 48" 67"
Mounting bolt kit (KIT-SLD-1824)Description QuantityBLT-302-25 2BLT-302-27 16 NUT-303-3 18WSH-304-7 36
Bracket pin and bushing kit (KIT-PIN-UNT)Description Quantity 4 KIT-PIN-UNT (No-Slack® NT) 2
3
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 11
Air slide bracket Mounted Item Part Number Height2 to 5 and 7 to 21 BKTATB6PT 6-3/4"2 to 5 and 7 to 21 BKTATB7PT 7-3/4"2 to 5 and 7 to 21 BKTATB8PT 8-3/4"2 to 5 and 7 to 21 BKTATB9PT 9-3/4"2 to 5 and 7 to 21 BKTATB10PT 10-3/4"
Rebuild kit (KIT-ATB)Item Description Quantity 7 BLT-301-5 2 8 BLT-301-2 1 9 BLT-301-3 1 10 BLT-302-12 1 11 LOC-287 2 12 LOC-683 1 13 LOC-664 1 14 LEV-686 1 15 SPR-632 2 16 CYL-COMP 1 17 BSH-629 5 18 NUT-303-9 4 19 NUT-303-6 3 10 WSH-304-4 6
Slide rails Slide Items Part Number Travel Length1 and 6 SLRTB12 12" 39.63"1 and 6 SLRTB16 16" 45.38"1 and 6 SLRTB24 24" 51.63"1 and 6 SLRTB36 36" 63.63"1 and 6 SLRTB48 48" 75.63"
Mounting bolt kit (KIT-SLD-1824)Description QuantityBLT-302-25 2BLT-302-27 16 NUT-303-3 18WSH-304-7 36
19
21
21
21 2121
21
21
21
7
7
889
10
10
11
1112
1314
15
16
17
17 17
17 17
18
18
19
19
19
19
1920
ATB air slide bracket and rails
1
6
1
2
2
3
3
4
4
5
Other kits for ATBSlide limit blocking kit . . . . . . . . . . . . . . . . . . . . . . . . . . . .KIT-SLS-ATBAir cylinder (CYL-5AWB-1 is superseded to CYL-COMP) . .CYL-COMPAir cylinder connection kit . . . . . . . . . . . . . . . . . . . . . . . . .KIT-AIR-COILAir installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KIT-AIRBushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .BSH-LLB
The ATB and AWB are not interchangeable. The ATB can be identified by the 2" slide increments and forked locking wedge.
Mounting angles 3/8" 3"x 4" (up to 24" slide travel) . ANGP55B175
ATB Parts Item Description Quantity 1 Rear slide stop 2 2 Lower bracket bushing (pr.) 1 3 Upper bracket bushing (pr.) 1 4 Bracket liners 2 5 Slide bracket (see slide brackets at right) 1 6 Slide rail (see slide rails at right) 1 7 Flat head socket, 1/2" -13 x 2", grade 5 2 8 Flat head socket, 1/2" -13 x 1", grade 5 2 9 Flat head socket, 1/2" -13 x 1-1/2", grade 5 1 10 Hex head bolt, 1/2" -13 x 1", grade 5 2 11 Locking wedge (pr.) 1 12 Locking wedge release bar 1 13 Locking wedge release bar 1 14 Latching lever 1 15 Locking member spring 2 16 Air cylinder 1 17 Bushing, 5/16" 5 18 Bushing, 7/16" 2 19 Hex lock nut, 1/2" -13, grade "C" 4 20 Hex jam nut, 1/2" -13, grade "B" 3 21 Flat washer, 1/2" I.D., 1-3/8" O.D., plain 8
ASYATB824 (3-3/4" height, 24" travel shown)
Bracket pin kit (KIT-PIN-LLB) 2 3 2-piece bushing 2 Pairs Bracket pin 2 Bracket retainer pin 2 Cotter pin 2 4 Bracket liner 2
800-874-9780 • www.fifthwheel.com12
Other kits for AWBAir cylinder (CYL-5AWB is superseded to CYL-COMP) CYL-COMPBushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSH-150Pins and bushings . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-PIN-191Air cylinder connection kit . . . . . . . . . . . . . . . . . . . . . KIT-AIR-COIL
Air installation kit . . . . . . . . . . . . . . KIT-AIRMounting angles 3/8" 3"x 4" (up to 24" slide travel) . ANGP55B175
Air slide bracket Mounted Item Part Number Height2 3 and 5 to 18 BKTAWB6PT 6-3/4"2 3 and 5 to 18 BKTAWB7PT 7-3/4"2 3 and 5 to 18 BKTAWB8PT 8-3/4"2 3 and 5 to 18 BKTAWB9PT 9-3/4"2 3 and 5 to 18 BKTAWB10PT 10-3/4"
Rebuild kit (KIT-AWB)Item Description Quantity 5 BLT-301-5 2 6 KIT-AWB-WEDGE 1 7 NUT-303-9 2 8 CYL-COMP 1 10 BLT-301-2 2 11 BLT-301-12 1 12 NUT-303-6 3 13 BSH-629 5 14 SPR-632 2 15 LOC-664 1 16 WSH-304-4 6 17 LOC-683 1 18 LEV-686 1
Slide rails Slide Mounted Items Part Number Travel Height1 to 4 & 7 SLR12B 12" 42"1 to 4 & 7 SLR16B 16" 46"1 to 4 & 7 SLR24B 24" 54"1 to 4 & 7 SLR36B 36" 66"1 to 4 & 7 SLR48B 48" 78"
Mounting bolt kit (KIT-SLD-1824)Description QuantityBLT-302-25 2BLT-302-27 16 NUT-303-3 18WSH-304-7 36
AWB air slide bracket and rails
AWB Parts Item Description Quantity 1 Rear slide stop 2 2 Bracket bushing (pr.) 1 3 Slide bracket (See slide brackets at right) 1 4 Slide rail (See slide rail at right) 1 5 Flat head socket, 1/2" -13 x 2", grade 5 2 6 Locking wedge (pr.) 1 7 Hex lock nut, 1/2" -13, grade "C" 4 8 Air cylinder 1 9 Bushing, 7/16" 2 10 Flat head socket, 1/2" -13 x 1", grade 5 2 11 Hex head bolt, 1/2" -13 x 1", grade 5 2 12 Hex jam nut, 1/2" -13, grade "B" 3 13 Bushing, 5/16" 5 14 Locking member spring 2 15 Locking wedge release bar 1 15 Flat washer, 1/2" I.D., 1-3/8" O.D., plain 8 16 Locking wedge release bar 1 17 Latching Lever 1 18 Flat head socket, 1/2"-13 x 1-1/2", grade 5 1
KIT-AWB-WEDGE
ASYAWB824 (8-3/4" height 24" travel shown)
Note: The AWB has been replaced by the ATB. The ATB and AWB are not interchangeable. The AWB can be identified by the 4" slide increments and single locking wedge. 3000 series top plates do not fit on AWB brackets.
1
1
5
5
1110
10
11
6
9
6
2
2
3
4
7
14
1417
18
7
7
7
719
712
8916
16
16
1616
1613
1313
13
13
16
1615
Bracket pin kit (KIT-PIN-191) 2 1-piece bushing 2 Bracket pin 2 Bracket retainer pin 2 Cotter pin 2
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 13
Mounting angles 3/8" 3"x 4" (up to 24" slide travel) . ANGP55B175
Note: The MWS has been replaced by the MTB. The MTB and MWS are not interchangeable. The MWS can be identified by the 4" slide increments and single locking wedge. 3000 series top plates do not fit on MWS brackets.
Slide bracket Mounted Item Part Number Height2 3 and 5 to 19 BKTMWS7PT 7-3/4"2 3 and 5 to 19 BKTMWS8PT 8-3/4"2 3 and 5 to 19 BKTMWS9PT 9-3/4"2 3 and 5 to 19 BKTMWS10PT 10-3/4"
Slide rails Slide Mounted Items Part Number Travel Height1 to 4 SLR12B 12" 42"1 to 4 SLR16B 16" 46"1 to 4 SLR24B 24" 54"1 to 4 SLR36B 36" 66"1 to 4 SLR48B 48" 78"
Mounting bolt kit (KIT-SLD-1824)Description QuantityBLT-302-25 2BLT-302-27 16 NUT-303-3 18WSH-304-7 36
MWS manual slide bracket and rails
MWS Parts Item Description Quantity 1 Rear slide stop 2 2 Bracket bushing (pr.) 1 3 Slide bracket (Slide bracket above) 1 4 Slide Rail (See slide rail above) 1 5 Flat head socket, 1/2" -13 x 2", grade 5 2 6 Locking wedge (pr.) 1 7 Hex lock nut, 1/2" -13, grade "C" 3 8 Pull handle 1 9 Flat head socket, 1/2" -13 x 1-1/2", grade 5 1 10 Flat head socket, 1/2" -13 x 1", grade 5 2 11 Hex head bolt, 1/2" -13 x 1", grade 5 1 12 Hex jam nut, 1/2" -13, grade "B" 3 13 Bushing, 5/16" 6 14 Locking member spring 2 15 Locking wedge release bar 1 16 Flat washer, 1/2" I.D., 1-3/8" O.D., plain 6 17 Locking wedge release bar 1 18 Latching lever spring 1 19 Latching lever 1
ASYMWS824 (8-3/4" height, 24" slide travel shown)
5
56
6
11
101013
1313
13
13
13
17 19
8
716
167
7
7
77
9 16 15
18 14
14
16
16
7
3
1
4
1
2
2
Bracket pin kit (KIT-PIN-191) 2 1-piece bushing 2 Bracket pin 2 Bracket retainer pin 2 Cotter pin 2
800-874-9780 • www.fifthwheel.com14
Other kits for AWX
Slide bracket Mounted Item Part Number Height5 6 and 8 to 22 BKTAWX9PT 9-1/2"5 6 and 8 to 22 BKTAWX10PT 10-1/2"5 6 and 8 to 22 BKTAWX11PT 11-1/2"
Slide rails Slide Mounted Items Part Number Travel Height1 to 4 & 7 SLR12X 12" 54"1 to 4 & 7 SLR24X 24" 66"1 to 4 & 7 SLR36X 36" 78"1 to 4 & 7 SLR48X 48" 90"
Mounting bolt kit (KIT-XLD-2224)Description QuantityBLT-302-36 2BLT-302-38 20NUT-303-7 22WSH-304-10 44
AWX air slide bracket and rails
MWS Parts Item Description Quantity 1 Flat head socket, 5/8" -11 x 1-3/4", grade 5 2 2 Slide stop 2 3 Flat washer, 5/8", plain 2 4 Lock nut, 5/8" -11, grade "B" 2 5 Bracket bushing (pr.) 1 6 Slide bracket (See slide bracket above) 1 7 Slide rail (See slide rail above) 1 8 Flat head socket, 1/2" -13 x 2", grade 5 4 9 Locking wedge (pr.) 2 10 Hex lock nut, 1/2" -13, grade "C" 12 11 Air cylinder 1 8 Bushing , 7/16" 1 9 Flat head socket, 1/2" -13 x 1", grade 5 6 10 Hex head bolt, 1/2" -13 x 1", grade 5 4 11 Hex jam nut, 1/2" -13, grade "B" 3 12 Bushing, 5/16" 14 13 Locking member spring 4 14 Locking wedge release bar 4 15 Flat washer, 1/2" I.D., 1-3/8" O.D., plain 15 16 Latching lever 2 17 Locking wedge connector bar 2 18 Hex head bolt, 1/2" -13 x 1-1/2", grade 5 1
ASYAWX924 (9-1/2" height, 24" slide travel shown)
1
7
5
5
6
8
9
88
9
16
16
1314 14
17
1616
19
1918
16 9
218
1519
2216
16
1019
1920
1816
13
1314
10 17 1019
179
16
19
21
11
19
18
10
1010
10
17
1
2
2
3
3
4
4
Air cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CYL-XAWXBushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSH-150Mounting bolt kit (up to 24" slide travel) . . . . . . . . . . . . . . KIT-XLD-2224Air installation kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . KIT-AIR
Note: The XAWX is not interchangeable with the ATB, AWB or ASB. The XAWX can be identified by the 4" slide increments and four separate locking wedges.
Bracket pin kit (KIT-PIN-XHD) 5 1-piece bushing 2 Bracket pin 2 Bracket retainer pin 2 Cotter pin 2
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 15
A36 plate mount fixed for 6000, 7000, 7000CC series top plates
FMA plate mount fixed for 6000, 7000, 7000CC series top plates
FMA-D3 plate mount fixed for 6000, 7000, 7000CC series top plates
Repair kits for A36Bushings . . . . . . . . . . . BSH-150Pins and bushings . . . . KIT-PIN-191
Repair kits for FMABushings . . . . . . . . . . . BSH-150Pins and bushings . . . . KIT-PIN-191
Repair kits for FMABushings . . . . . . . . . . . BSH-150Pins and bushings . . . . KIT-PIN-191
A36 mounts (34" frame width)Part Number Mounted heightBKTA365750E . . . . 5-3/4"BKTA366250E . . . . 6-1/4"BKTA367250E . . . . 7-1/4"BKTA368250E . . . . 8-1/4"BKTA369250E . . . . 9-1/4"BKTA3610250E . . 10-1/4"
FMA mounts Part Number . Mounted heightBKT6FMA6375* . . . 6-3/8BKT6FMA7375* . . . 7-3/8BKTFMA6375 . . . . . 6-3/8BKTFMA7375 . . . . . 7-3/8BKTFMA8375 . . . . . 8-3/8BKTFMA9375 . . . . . 9-3/8BKTFMA10375 . . . . 10-3/8
FMA mounts Part Number . Mounted heightBKT6FMA6375-D3* . .6-3/8BKT6FMA7375-D3* . .7-3/8BKTFMA8375-D3 . . . .8-3/8BKTFMA9375-D3 . . . .9-3/8BKTFMA10375-D3 . . 10-3/8
A36 mounts (33-1/2" frame width)Part Number Mounted heightBKTA365750L . . . . 5-3/4"BKTA366250L . . . . 6-1/4"BKTA367250L . . . . 7-1/4"BKTA368250L . . . . 8-1/4"BKTA369250L . . . . 9-1/4"BKTA3610250L . . 10-1/4"
Note: The A36 will not fit the SLTPL3000 or SLTPLUNT top plate.
Note: The FMA will not fit the SLTPL3000 or SLTPLUNT top plate.
Note: The FMA-D3 will not fit the SLTPL3000 or SLTPLUNT top plate.
FMA-D3 models can be identified by the 4 bolt pattern.
* BKT6FMA and BKT6PLT brackets are used with 6000, 7000 & 7000CC top plates only and include front rocker limit blocks (example BKT6FMA6375). BKTFMA and BKTPLT brackets (example BKTFMA6375) do not have front rocker limit blocks.
* BKT6FMA-D3 and BKT6PLT brackets are used with 6000, 7000 & 7000CC top plates only and include front rocker limit blocks (example BKT6FMA6375). BKTFMA and BKTPLT brackets (example BKTFMA6375) do not have front rocker limit blocks.
SL 7 LWB 6750 12Release Top plate model Mounting bracket model Mounting height Slide travel
1. Top plate 2. Mounting bracket 3. Slide rail
Fontaine Fifth Wheel complete assembly part numbers. Example: SL7LWB675012
SL = Side Left SR = Side RightAA = Air ActuatedBL = Blocked Left
6 = No-Slack® II 60007 = No-Slack® II 70000C = No-Slack® II 7000CC (left release only)
NT = No-Slack® II NT (left release only)
H = 5092 No-Slack®
X = X5092 No-Slack®
Actual height from truck frame to top of fifth wheel.Examples: 7125 = 7-1/8" 7250 = 7-1/4" 8375 = 8-3/8" 9750 = 9-3/4"
For sliding fifth wheels only. Example: 12 = 12" slide 24 = 24" slide 36 = 36" slide 48 = 48" slide
LWB = Light weight bracketATB = Air slide bracketMTB = Manual slide bracketPMA = Plate mount adjustablePSA = Short plate mountFMA = Frame mountFMA-D3 = Frame mountBSM = Bracket stationary mountAWX = Xtra® heavy duty air wedge slide
Stationary Brackets
800-874-9780 • www.fifthwheel.com16
PMA plate mount adjustable for 6000, 7000, 7000CC series top plates
APB plate mount adjustable for No-Slack® NT series top plates
PSTP* plate mount fixed for 6000, 7000, 7000CC, H5092, X5092 series top plates
BSM stationary bracket mount for 6000, 7000, 7000CC series top plates
Repair kits for PMAPins, bushings and bracket liners . . . . . . . . . . . . . . . . . .KIT-PIN-LLBMounting bolt kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KIT-PMA
Repair kits for BSMPins, bushings and bracket liners . . . . . . . . . . . . . . . . . .KIT-PIN-LLB
Repair Kits for APBPins and bushings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KIT-PIN-3000Mounting bolt kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .KIT-PMA
Repair kits for PSABushings . . . . . . . . . . . BSH-150Pins and bushings . . . . KIT-PIN-191
PMA mountsPart Number Mounted heightASYPMA6250 . . . . . 6-1/4"ASYPMA7250 . . . . . 7-1/4"ASYPMA8250 . . . . . 8-1/4"ASYPMA9250 . . . . . 9-1/4"ASYPMA10250 . . . 10-1/4"
APB mountsPart number Mounted heightASYAPB6250 . . . . . 6-1/4"ASYAPB7250 . . . . . 7-1/4"ASYAPB8250 . . . . . 8-1/4"
Mounting bracketsPart number Mounted heightBKTPLT7125 . . . . . . 7-1/4"BKTPLT8125 . . . . . . 8-1/4"BKTPLT9125 . . . . . . 9-1/4"BKTPLT10125 . . . . 10-1/4"BKTPLT11125 . . . . 11-1/4"
Mounting platesPart numberPLTPS5PLTPL5
BSM mountsPart number Mounted heightBKTWLD5375 . . . . . 5-3/8"BKTWLD5875 . . . . . 5-7/8"BKTWLD6875 . . . . . 6-7/8"BKTWLD7875 . . . . . 7-7/8"BKTWLD8875 . . . . . 8-7/8"BKTWLD9875 . . . . . 9-7/8"
Note: The PMA will not fit the SLTPL3000 or SLTPLUNT top plate.
Note: The APB will only fit the SLTPL3000 or SLTPLUNT top plate.
Note: To order, specify a mounting plate and mounting brackets. Both are required.
Note: Some welding required.
Stationary Brackets
Mount Description Width x length Holes per sideHole
spacing across frame
First hole measured from rear, then spacing between holes
PS5 Plate short 40.00" x 23.75" 5 (for 5/8" hardware) 38" 1.88", 6.00" - 4.00" - 4.00" - 6.00"PS4 Plate short 40.00" x 23.75" 4 (for 3/4" hardware) 38" 1.88", 6.00" - 8.00" - 6.00" (Navistar Prefered)
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 17
BLHAWB blocked air slide fifth wheels
BLHMWS blocked manual slide fifth wheels
BLHPSA blocked plate mount fifth wheels
Kits and parts for blocked fifth wheels
BLHAWB
BLHMWS
BLHPSA
KIT-BLK-SLD
BAR-396-BK
Blocked H5092
Blocked H5092
Blocked H5092
Blocked fifth wheels
Blocking Kit (For AWB and MWS Brackets)Blocking kit for H5092 top plate and BLHAWB bracket. . . . . . . . . . . . . . . . . . . . . . . KIT-BLK-SLD
Note: The bracket height must be 8 3/4". Kit must be installed by a certified welder. See TB-030 for installation instructions.
Replacement Bar (For AWB, MWS and PSA Brackets)Replacement bar for Blocked H5092 top plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . BAR-396-BK(For BLHAWB, BLHMWS and BLHPSA brackets)
Part Number Mounted Height DescriptionBLHAWB8PT* . . . . . 8-3/4" . . . . . . Blocked H5092 top plate with BLHAWB bracketBLHAWB9PT* . . . . . 9-3/4" . . . . . . Blocked H5092 top plate with BLHAWB bracketBLHAWB10PT* . . . 10-3/4" . . . . . Blocked H5092 top plate with BLHAWB bracket
*Does not include slide rail. See AWB slide rails on page 12.
*Does not include slide rail. See MWS slide rails on page 13.
Part Number Mounted Height DescriptionBLHMWS8PT* . . . . . 8-3/4" . . . . . . .Blocked H5092 top plate with BLHMWS bracketBLHMWS9PT* . . . . . 9-3/4" . . . . . . .Blocked H5092 top plate with BLHMWS bracketBLHMWS10PT* . . . 10-3/4" . . . . . .Blocked H5092 top plate with BLHMWS bracket
Part Number Mounted Height DescriptionBLHPSA8375 . . . . . 8-3/8" . . . . . . Blocked H5092 top plate with BLHPSA bracketBLHPSA9375 . . . . . 9-3/8" . . . . . . Blocked H5092 top plate with BLHPSA bracketBLHPSA10375 . . . 10-3/8" . . . . . . Blocked H5092 top plate with BLHPSA bracket
800-874-9780 • www.fifthwheel.com18
1. Inspect the top plate and degrease if necessary. Lubricate the top surface of the fifth wheel with thin layer of grease. Leave area around the jaw and wedge free of grease.
2. Grease the mount brackets (4 zerks). Lift the top plate up with a pry bar to ensure grease gets to the top of the brackets.
Hint: If the zerks will not take grease, remove top plate and clear the grease channels.
3. Trip the locking mechanism with a pry bar by pushing the bumper off its seat. Keep your hands and arms out of the fifth wheel throat.
Note: For cold weather maintenance, please see page 20 or visit our website at www.fifthwheel.com.
4. Separate the jaw and wedge with a screwdriver and press a moly based lubricant between the serrated surfaces (Mobil grease moly 50 or equivalent). Also press the lubricant in the kingpin contact area on both the stationary jaw and the moveable jaw. Work the action of the pull handle back and forth to spread the lube over all the surfaces.
Grease channels
JawJaw
WedgeWedgeWedge
BumperBumperBumper
No-Slack® preventive maintenance
Place nozzle of grease gun into all zerks (both sides).
Place nozzle of grease gun into all zerks (both sides).
Place nozzle of grease gun into all zerks (both sides).
Place nozzle of grease gun into all zerks (both sides).
Place nozzle of grease gun into all zerks (both sides).
Place nozzle of grease gun into all zerks (both sides).
Pry up top plate for best results.
Pry up top plate for best results.
Pry up top plate for best results.
Pry up top plate for best results.
Pry up top plate for best results.
Pry up top plate for best results.
Kingpin contact areaKingpin contact areaKingpin contact area
Note: For hard to open or excessive slack on 6000/7000/7000CC top plates:• Firstcheckthepullhandleforstraightness• Ifbent,replaceimmediately
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 19
2. Insert a dimensionally correct test kingpin tool into the throat of the fifth wheel. Carefully push the kingpin in until the locking mechanism is activated. Keep your hands out of the fifth wheel throat.
4. Check the travel of the wedge stop rod by pushing in on it. It should move in 1/4" with hand pressure and then spring back out. To obtain a proper setting, turn the wedge stop rod clockwise to reduce the gap and counter-clockwise to increase it. Adjust until the free travel is 1/4".
Hint: If necessary, tap the wedge-stop rod with a hammer to release a tight wedge.
3. Verify that the pull handle is in the fully locked position (within 1" of the fifth wheel skirt). Check the pull handle for straightness. If bent, replace immediately with KIT-PUL-6000L or R.
1. Wedge stop rod adjustment is not required as part of the pre-service procedure. It is set during the final assembly inspection at our manufacturing facility. At the first recommended P.M. (90 days or 30,000 miles whichever comes first) and every 90 days or 30,000 miles there after, the wedge stop rod should be adjusted per technical Bulletin TB-012. Note P.M. intervals are recommended based on standard duty applications. Applications more severe than standard duty may require different P.M. intervals to ensure peak performance.
No-Slack® jaw and wedge adjustment
Within 1"Within 1"1/4" Wedge
StopRod
WedgeStopRod
WedgeStopRod
WedgeStopRod
WedgeStopRod
WedgeStopRod
WedgeStopRod
Wedge
Note: For cold weather maintenance see the Fontaine Technical Bulletin (TB-008). See our video and support section at fifthwheel.com for a complete library of recommended maintenance practices for Fontaine Fifth Wheel products.
No-Slack® test kingpinKIT-NOSLACK-KP
Skirt
Pull handle
800-874-9780 • www.fifthwheel.com20
X
What about cold weather?
A
The installed height of all Fontaine models is measured from the top of the truck frame to the top of the fifth wheel. For standard models dimension “A” is a part of the model number. For example, if dimension “A” in this diagram is 7.75 inches, it would appear in the model number as 7750 (Example: SL7ATB775024).
To determine the length of travel on a sliding fifth wheel, measure the slide rail and deduct 30 inches from the “X” dimension (for Xtra® heavy duty models deduct 42 inches). For example, if dimension “X” above measures 54 inches, deduct 30 inches, leaving 24 inches of actual slide travel. For standard models this dimension is a part of the model number: SL7ATB775024).
Separate jaw and wedge with screw driver and grease full length.
Clean, oil and grease all moving parts (see arrows).
Wedge
Jaw
No-Slack® (6000/7000/7000CC)
Jaw and wedge
Grease fittings
When the temperature drops below freezing, Fontaine recommends a thorough cleaning of the latching mechanism using a suitable cleaner or degreaser. Lubricate the fifth wheel prior to opening and closing. Refer to figures below. Open and close the fifth wheel several times to distribute the grease. Fontaine suggests the use of a moly-based lubricant such as Mobil grease moly 50 or equivalent. Areas or regions that experience extreme and/or prolonged freezing temperatures should consider using a less viscous substance such as: 90-weight oil, diesel fuel, kerosene, motor oil, etc. Fontaine recommends contacting your specific lubricant manufacturer for guidelines on mixing compatibility of any lubricant.
How do I find my serial number?
New style serial number (after 11/27/00). Serial number engraved directly into the right side of fifth wheel skirt. Note: position 5 and 6 of the serial number indicates the year built.
XXXXXXXXX
No-Slack® right side view
Serial number engraved directly into the left side of fifth wheel skirt. Note: position 5 and 6 of the serial number indicates the year built.
XXXXXXXXX
3000 left side view
Old style serial number (before 11/27/00). Serial number located on small rectangular tag on front of top plate. Note: position 3 and 4 of the serial number indicates the year built.
XXXXXXXXX
No-Slack® front view
Which fifth wheel is best for my application?
Can worn bracket bushings be replaced under warranty?
Fontaine has an application guide (LT-076) that be obtained on our website or by calling Fontaine Parts Connection.
No. Bracket bushings are a wear item and therefore not warrantable. The bushings are not a structural component. They help reduce negative load stresses that can be harmful to the fifth wheel assembly and keep the bracket pins from making unnecessary noise from vibrations.
Frequently asked questions
How do I measure a fifth wheel?
Kingpin contact areaKingpin contact areaKingpin contact area
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 21
What is allowed vertical movement between fifth wheel plate and mounting plate?
What is allowed vertical movement between slide rail and slide bracket?
What is allowed horizontal (side to side) movement between fifth wheel plate and mounting base?
Up to 1/2" vertical movement is possible. This movement helps to reduce negative load stresses that can be harmful not only to the fifth wheel assembly, but to the truck frame also. This feature can only be found on Fontaine products.
Up to 3/16" vertical movement is possible. Any movement beyond the specified dimension may be due to wear or other problem. Steps should be taken to determine the cause. This dimension is to be used as a reference for service criteria only. For DOT out of service criteria, please consult the following website www.cvsa.org
Up to 1/4" horizontal (side to side) movement is possible. Any movement beyond the specified dimension may be due to wear or other problem. Steps should be taken to determine the cause. This dimension is to be used as a reference for service criteria only. For DOT out of service criteria, please consult the following website www.cvsa.org
Up to 1/2" vertical movement
Side view
Up to 3/16" verticalMovement between slider bracket and rail
3/16"
Front view of bracket and rail
Up to 1/4"horizontal
movementbetween
fifth wheeland bracket
stand
Rear view of fifth wheel assembly
What is allowed horizontal (side to side) movement between slide rail and slide bracket?
Up to 5/16" horizontal (side to side) movement is possible between the slide rail and slide bracket. Any movement beyond the specified dimension may be due to wear or other problem. Steps should be taken to determine the cause. This dimension is to be used as a reference for service criteria only. For DOT out of service criteria, please consult the following website www.cvsa.org
Up to 5/16" horizontalmovement between slider bracket and rail
Front view of bracket and rail
5/16"
Frequently asked questions
800-874-9780 • www.fifthwheel.com22
How can I tell if 6000/7000/7000CC wheel is locked?
If the wheel is a No-Slack® 6000/ 7000/7000CC series the locking jaw and wedge must be across the throat of the wheel. In addition, the pull handle must be within 1" of the skirt of the wheel. The pull handle should be used as a positive lock indicator.
Closed NOTE: Gap between pull handle and skirt of wheel less than 1”
Pull handle
6000 seriesshown
Fifth wheel skirt
Not closed NOTE: Gap of 1" or more between wheel skirt and pull handle
Pull handle
Fifth wheel skirt
How can I tell if 5000/5092 wheel is locked?
If the wheel is a No-Slack® 5000 or 5092 series the locking jaw and wedge should be across the throat of the wheel. In addition, the bottom section of the two-piece pull handle should be in and down behind the triangular piece located just inside the fifth wheel skirt.
Closed
Not closed
NOTE: The two-piece pull handle dropping in behind the triangular piece
NOTE: The two-piece pull handle not dropping in behind the triangular piece
Pull handle
Pull handle
Fifth wheel skirt
Fifth wheel skirt
Triangle piece
Triangle piece
Pull handle
Pull handle
Side view
Side view
Note: Bar is visible
How much stationary jaw wear is allowed until rebuilding the fifth wheel will not eliminate slack/movement between the trailer kingpin and locking mechanism?
Frequently asked questions
After determining the fifth wheel is in need of rebuilding, install the appropriate genuine rebuild kit (see page 2). Using the following steps, test the fifth wheel:
1. Insert a 2" test kingpin or plug.
2. With the fifth wheel in the fully closed position, use the illustration below to determine if the unit is within usable specifications.
If gap is less than 5/16" at any point along indicated area, then fifth wheel must be replaced
800-874-9780 • www.fifthwheel.com800-874-9780 • www.fifthwheel.com 23
What is the warranty coverage?
Fontaine’s warranty is for five years covering parts for material and workmanship. There are a few exceptions. See our existing warranty standard or call us at for more information.
What is the recommended maintenance procedure?
For No-Slack and 3000 models, recommended maintenance is at least every 90 days or 30,000 miles. All recommended practices are located in the Fifth Wheel Handbook supplied with every unit shipped or may be obtained by ordering from Fontaine. For 3000 models, lubrication is recommended every 6 weeks or 15,000 miles.
What is the difference between wedge-stop rod and knock-out rod
The wedge-stop rod serves as a slack adjustment and a knock-out rod. A knock-out rod serves only as a emergency release in case the wheel should ever bind up. Both type protrude through the side of the wheel opposite the side of the pull handle. The adjustable type requires a 1/4" gap between the tip of the locking wedge and the tip of the wedge-stop rod when coupled to a 2" diameter pin. Proper adjusting can be achieved by turning the hex head bolt counter clock wise to increase the gap or clockwise to decrease the amount of gap. The 1/4" will allow the lock to automatically compensate for reasonable variances in kingpin wear. The non-adjustable type will resemble a rivet head or carriage bolt type head. This type is self adjusting and will stay in constant contact with the tip of the locking wedge when the wheel is in the closed position. Both of these are spring loaded and may be struck with a hammer in the event the unit will not release when trying to uncouple from a trailer.
How do the primary and secondary locks work on the type of wheel I have?
The No-Slack® 5000/5092 and 6000/7000/7000CC model wheels carry the same primary locks. The primary lock is the jaw and wedge itself. Between the mating surfaces of the two are small serrations. The geometry of the serrations keeps the wheel from being able to come open when the wheel is in the fully closed position.
5000/5092 models carry a two-piece pull handle in which the bottom section when fully closed will drop in and down behind a small triangular piece located just inside the skirt of the wheel. This serves as a secondary lock.
6000/7000/7000CC models have a slightly different feature to serve as a secondary lock. A rotating latch located on the front on the operating handle serves as a positive stop which will only release when activated by the pull handle. The use of the pull handle allows the latch to rotate enough to bypass its stop and open the wheel. If the pull handle is against the skirt of the wheel after coupling the secondary latch should be engaged. ALWAYS BE SURE TO CHECK THE PRIMARY AND SECONDARY LOCKS AFTER COUPLING.
Frequently asked questions
Can I change the height of my fifth wheel?
Changing fifth wheel height can be as simple as changing the brackets. It all depends on the type of application, style of fifth wheel and the type of existing base. These factors will determine just how high or low you can go.
How much wear is allowed for a kingpin?
According to SAE J2228 - Kingpin Wear Limits, if the upper shoulder which is 2.875" new or the smaller 2" diameter is worn more than .125 (1/8)" the kingpin should be replaced.
What if my fifth wheel is hard to open?
Make sure a pre-service lubrication has completed before unit is out in service. Make sure the driver is backing tight against the trailer after setting the trailer brakes. This will reduce any tension or pressure on the locking jaw and wedge. DO NOT dump chassis air bags before uncoupling from trailer. Make sure the wedge-stop rod is properly set to the recommended gap. Make sure the truck and trailer are not in a bind or twist (No daylight between top plate and trailer plate). Check for any lower mount obstructions or interference underneath the wheel. Check for damage to the fifth wheel. See troubleshooting chart on back cover.
How much wear is allowed on the bracket pins?
Any visible wear that allows the fifth wheel to exceed the 1/2" maximum vertical movement between the wheel and base stand or any apparent deformation or material separation requires the pins to be replaced.
Fontaine Parts Connection • 7574 Commerce Circle • Trussville, AL 35173 • 800.874.9780 • Fax 205.661.4900www.fifthwheel.com
Hard to close 6000/7000/7000CC
Excessive slack6000/7000/7000CC
Hit the wedge-stop rod
Adjust the wedge-stop rod
Hard to open 6000/7000/7000CC
Are frontrocker limit blocks
installed?
Whencoupled is the gap
between the wedge-stop rod and the locking wedge 1/4"?
Will thepull handle move
more than 1 inch?
Have youhit the wedge-stop rod
to loosen it?
Are front rocker limit blocks
installed?
Engage trailer brakes and back up tractor to relieve pressure.
Make sure air suspension is not dumped before uncoupling.
Make sure bushings are not over-tightened.
Check for bent or damaged handle guide, pull handle, operating handle, cover plate.
Check serrations for proper fit, paint runs, or proper lubrication.
If wheel is air actuated, check for bent air cylinder shaft.
Check for obstruction hitting underneath.
Check for damage to wedge (burrs, bent from hitting kingpin, etc.)
Check for proper wedge-stop rod adjustment.
Check for installation of correct bracket pins.
Check for proper installationof bushings.
Check for damage to locking mechanism, operating handle, pull handle, handle guide, cover plate, etc.
Check for damage to locking mechanism, operating handle,
pull handle, handle guide, cover plate, etc.
Check for interference between top plate and
base mount.
Adjust wedge-stop rod.Adjust wedge stop rod.
Check for kingpin wear.
Check locking jaw and wedge serrations for wear.
Check stationary jaw for excessive wear or damage.
Check for bent operating handle and/or pull handle.
Check for bent handle guide and/or cover plate.
Check for bent or broken bumper guide.
Check for bent or damaged bumper and/or secondary
lock springs.
Check for missing pivot point bushings.
Check the tip of the bumper to make sure it isn't worn, broken or bent.
Check the bottom flange of kingpin to make sure it isn't worn, broken or bent.
Check to make sure the bumper spring and pull handle spring are not
missing or damaged.
Check the stationary jaw to make sure that it is positioned properly and that it
isn't worn, broken or bent.
Check the cover plate to make sure it is positioned properly and that it isn't
worn, broken or bent.
While coupling, does the
handle retract at all?
Is the fifth wheel lock
completely closed?
Check for damage to locking mechanism, operating handle,
pull handle, handle guide, cover plate, etc.
If wheel is air actuated, check for bent air cylinder shaft.
Check for damaged components such
as pull handle, operating handle,
handle guide. Install rocker limit blocks.
Finish or call Fontaine Parts Connection
Finish or call Fontaine Parts Connection
Finish or call Fontaine Parts Connection
Troubleshooting flow charts
YES NO
NO
NO
YES
YES
NO
YES
YES YESNO NO
YES
NO
©2014 Parts Connection • LT-135 • 2.5M • January 2014
Recommended