View
3
Download
0
Category
Preview:
Citation preview
We keep your Production
running!
AdoptSMT News 64E
❍ Spare Parts & Consumables❍ SMT Feeders❍ Pre-Owned Equipment❍ Service & Training
SMT NurembergStand 4A-151 and 4A-149
❍ Labels❍ Printing❍ Applying
❍ Hand Soldering❍ Repair Soldering❍ Solder Robot
AdoptSMT – your reliable partner since 1991 for
Soldering
SMT
Identification
News 64
www.AdoptSMT.com
AdoptSMT News 64 - Page 2 of 20 - www.AdoptSMT.com
We keep your Production
running!
ConsumablesSpare PartsServiceFeedersMachines
Dear Customer, dear Partner!It seems to be modern to only look ahead and never look back. Everything is seen in the future; even industrial revolutions are nowadays seen and numbered before these happen.Probably because of the pre-owned equipment business, which got us started and which is still an integral part of our services, we at AdoptSMT tend to see this differently.Being in business since 1991 we saw many trends go and come back again. For example the equipment shortage. This was the AdoptSMT News cover 8 years ago:
www.AdoptSMT.com
Europe’s No.1 Source for pre-owned SMT
AdoptSMT Group - The alternative to buying new
AOI, Test & X-Ray
FeederMaster®
Screen Printers
AdoptSMT News 51E
Visit us at
Pick & Place
Adopt SMT Premium Parts
Original Spare PartsConsumablesTools
Your reliable supplier for
Reflow Ovens Feeders
We want to buy YOUR
under utilized Equipment!
This has again become true. The large package of SIPLACE equipment we were able to buy one year ago made 2017 the best year of AdoptSMT Group – but now we need again good equipment manufactured 2010 or later for many registered customers.Not only trends are coming back, also names and terms. “The alternative to buying new” as a slogan had resulted from taking over “Alternative SMT”, formerly “Alternative Distribution” in UK, which we renamed to AdoptSMT UK Ltd. and integrated to the AdoptSMT Group in 2008.Besides our Premium Parts we are also very successful in supplying many original parts to our European customers; we source many of these through “alternative distribution channels”. A growing number of European customers are taking advantage of the savings we can forward this way especially for original Fuji NXT nozzles and filters for Fuji and Panasonic SMT machines.Thank you for your interest in our products and services, I hope to see you at the SMT show in Nuremberg and also want to invite you to see our operations at our headquarters in Grödig near Salzburg, Austria.
Register now online using our registration number 1812325061 at smthybridpackaging.com/tickets. You will receive your personal season ticket by the show organizers.
AdoptSMT at the SMT 2018Please visit us at
Hall 4A, Stand 4A-151 and 4A-149
Nuremberg June 5 to 7.2018
Erhard HofmannFounder and Managing DirectorAdoptSMT Group
AdoptSMT News 64 - Page 3 of 20 - www.AdoptSMT.com
AdoptSMT homepage, Catalogs, Price ListsBesides improvements and new products and services we can give in this 20 page AdoptSMT News only a rough overview of how we can help you. Please see the catalog section on our homepage for easy opening and downloading of our more detailed catalogs. Don’t hesitate to call or email us with any question or request. AdoptSMT isn’t a web shop; we are industry professionals interested in understanding you – our customer – and your needs and in finding the right product or service matching your needs and price expectation. We do not publish our price lists on the homepage, but are happy to send these to you once we understand your needs and can point out which of our product options will meet your requirements based on our experience.Please browse through our homepage, it’s easy and informative.
With the search tools on our homepage you can easily check if we have the part or machine you are looking for available or also if we have a “wanted” listing for a machine you might want to sell.
Search Machines
Search Spares, Consumables, Feeders and Tools
Search Overview
We keep your Production
running!
ConsumablesSpare PartsServiceFeedersMachines
AdoptSMT News 64 - Page 4 of 20 - www.AdoptSMT.com
We keep your Production
running!
Count On ToolsNozzles and Tools for the SMT process
Hover-Davis Feeders for SMT components, Labels and Dies
JBCSoldering Tools
NortecLabels and masking products
FUME EXTRACTION SYSTEMSPUREX Purex
Fume extraction
TechsprayCleaning products
ThermaltronicsSoldering Tools
Original, Premium, Renew AdoptSMT sales conditionsOn the following pages we will show you our products and services grouped by process – SMT Process page 6 to 13, Identification pages 14 to 16 and Soldering pages 17 to 19.Here we are giving an overview of our sales conditions:
Original NewAdoptSMT is an official distributor of the following companies or brands and is offering their machines and tools, spares and consumables in the respective sales territories:
In addition, AdoptSMT can offer price advantages on many original spare parts for machines as described under „Premium New“, which are sourced via package purchases or alternative distribution channels.
Premium NewAdoptSMT Premium Parts are tested and qualified. With the same or better quality they also offer price advantages compared to original parts.AdoptSMT is selling nozzles, feeders, filters, motors and other parts in Premium Quality compatible to machines of most brands in the SMT process, including:
In addition parts and tools useable for different brand equipment or with major improvements to original parts are marketed as AdoptSMT branded Premium Parts. This includes splicing articles and under stencil cleaning rolls.
ConsumablesSpare PartsServiceFeedersMachines
AdoptSMT News 64 - Page 5 of 20 - www.AdoptSMT.com
We want to buy YOUR
under utilized Equipment!
We keep your Production
running!
RenewAdoptSMT is offering many services enabling the reuse of equipment or parts. This is saving both money and resources.
Service and RepairAdoptSMT is servicing hundreds of customer owned feeders and stock feeders for resale every month. Take advantage of our experience, test our service with a few feeders.Many more parts than just feeders are worth getting repaired! AdoptSMT offers repair service for placement heads, large motors, tape cutters, nozzle magazines and more parts and of course for complete machines.
Part ExchangeCustomers usually can’t afford the down time to wait for a part sent out for repair and in many cases don’t want to invest into an extra part. No problem – with the AdoptSMT part exchange program you can fit an AdoptSMT overhauled part before you return your worn part.
OverhaulThere are many reasons for buying overhauled equipment, only two of these are: saving money and the environment. Often the equipment used in a factory isn’t available new anymore. Overhauled equipment can still be compatible.
Trade-InDo you need more feeder capacity while you have too much capacity of throughput? Do you have dual lane feeders which don’t fit into your setup management system and want to exchange these against single lane feeders? Or do you prefer dual lane feeders for cost saving reasons? Do you want to exchange equipment in order to get a more uniform manufacturing environment?There are many reasons to talk to us. AdoptSMT can balance the different needs of many different customers.
Remarketing of equipment put out of service
AdoptSMT is the partner you can trust for 25 years.
AdoptSMT reaches out to far more than 20,000 persons in the electronics industry.
AdoptSMT can also purchase right out or offer on single pieces of equipment.
ConsumablesSpare PartsServiceFeedersMachines
AdoptSMT News 64 - Page 6 of 20 - www.AdoptSMT.com
We keep your Production
running!
Pre-owned machinesAdoptSMT buys, overhauls, sells and rents pick and place machines and peripheral equipment as well as complete SMT lines of all makes, preferably:● Stencil printers DEK and EKRA● PCB assembly SIPLACE, MYDATA, FUJI, PANASONIC● Board Handling ASYS, NUTEK● Reflow Ovens, Wave Soldering and Selective Soldering Machines REHM, ERSA, SMT, SEHO, ASSCON
Please see these catalogs showing more detail of the services including parts supply and parts overhauling we can offer for this equipment:
● SIPLACE PICK AND PLACE (44 pages!)● FUJI PICK AND PLACE (16 pages)● BOARD HANDLING (including PCB racks,
8 pages)
Please check for the Catalogs at AdoptSMT.com/#SectionLibrary
or talk to your AdoptSMT sales contact and also request the price lists.
Ref. 35510 SIPLACE X4 year 2012, currently equipped with a special transport for PV modules and 4 pcs. Twin Head, software 6.05. Almost no running hours! AdoptSMT can retrofit this machine with a standard single lane or dual lane PCB transport and trollies for S feeders. A retrofit to 4 pcs. X feeder trollies is doable, but most likely too expensive. Heads can get exchanged against DLM 6-nozzle and DLM 12-nozzle heads.
Ref. 36944 SIPLACE 80 S27 HM year 2006, flexible dual lane transport L->R, 2x DLM2-12 collect
and place heads.
Catalog Board Handling E - 04/2018www.AdoptSMT.com
BOARD HANDLING CATALOG NOVEMBER 2017
PRE-OWNED BOARD HANDLING EQUIPMENT
RETROFIT SERVICE
PCB RACKS
ConsumablesSpare PartsServiceFeedersMachines
FUME EXTRACTION SYSTEMSPUREX
AdoptSMT News 64 - Page 7 of 20 - www.AdoptSMT.com
We keep your Production
running!
The ezLOAD series is a low cost and ESD safe board support system. The soft, flexible fingers enable maximum protection of critical components, even on double-sided boards. It is compatible to pick and place machines, stencil printers, dispensers, AOI etc.
ezLOAD Board Support System
Fume Extraction for Reflow Ovens, Wave Solder and Selective Solder Machines, Dispensers, Coating Machines and Lasers for marking and cutting.
User friendly operating system.Touch screen control.
NEW
iFumeThe Future of Fume
Extraction has arrived.
Ref. 37250 SMT QPL Plus VAC N2 Vacuum Reflow Oven, single lane pin chain transport 65 – 510mm. Still in production until end of May 2018 (since November 2015), available through AdoptSMT remarketing ex works user or after overhaul.
ConsumablesSpare PartsServiceFeedersMachines
New tools for assembly line equipment
SOLDSiplace SX2
AdoptSMT News 64 - Page 8 of 20 - www.AdoptSMT.com
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
AdoptSMT is buying, overhauling and selling feeders and offering feeder service for these brand feeders:● SIPLACE● Hover-Davis ● COT ● Mydata ● Fuji● Panasonic● Yamaha / Philips● Assembleon● Hitachi● Juki● Mimot● Essemtec● Europlacer● Universal Instruments
Wanted to buy: Fuji NXT, Assembleon ITF /TTF, Mydata
Agilis, SIPLACE feeders
Feeder Service and overhauled feeders
AdoptSMT News 64 - Page 9 of 20 - www.AdoptSMT.com
ConsumablesSpare PartsServiceFeedersMachines
We keep your SIPLACE machines
running!
Feeder partsTake advantage of our large purchasing volume resulting in lower purchasing prices! We are forwarding these cost savings to you. We have most wear parts of S feeders always available either as original parts or as AdoptSMT Premium Parts. Ask for our price list!
Example of original parts: Drive Motors for 3x8mm and 2x8mm S feeders
Example of AdoptSMT premium parts: Pick-up Windows for 3x8mm, 2x8mm, 12/16mm, 24/32mm S feeders
Count On ToolsLED Nozzles
By working closely with select LED component manufacturers, Count On Tools guarantees secure picking of all fragile components and accurate placement on circuit boards.Available for all major pick and place brands.
Special Nozzles and Standard Nozzles
AdoptSMT is your European partner for all COT SMT parts. COT produces cost effective high quality standard replacement nozzles and special nozzles for odd shaped components for many different placement platforms including Fuji, Juki, Mydata, Panasonic, SIPLACE and Yamaha.
Mydata Feeder Insert RepairDon’t buy a new insert because the tip of the plow broke! We repair your feeder by replacing the plow by one manufactured by COT.
broken tip Replacement springs also available!
NEW Replacement of side cover when handle is broken.
AdoptSMT News 64 - Page 10 of 20 - www.AdoptSMT.com
The only Wafer feeder available for different SMT placement systems and custom automation platforms. Single wafers are vertically loaded into the feeder, positioned automatically, then precisely located by a vision system. The DDf Innova may use either ink dot recognition or wafer mapping to ensure that only good die are extracted from the wafer frame.Using Direct Die Feeders from Hover-Davis lowers overall capital investment and reduces assembly costs. By utilizing DDf technology, customers may realize significant savings by:● Eliminating separate and dedicated production lines for SMT, bare die, and flip chip by
combining them into one.● Enabling total assembly solutions with much higher speed and flexibility, resulting in lower cost
per placement.● Eliminating costly, non-value added processes, such as intermediate die transfer into pocketed
tape, surf tape, or waffle packs prior to placement.
Feeders for Automation Projects
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
QF Series Tape FeederHover-Davis QF feeders were originally developed for older Fuji QP2/QP3 placement machines, but are since then widely used in customer specific placement / mounting cells and with programming systems.Features:● Tape widths available 8mm to 120mm,
standard pocket depth up to 22mm● Electronic pitch selection● Smooth tape index● Reverse index tape drive● Durable tape window design● Easily customized for special
applications
Many more advantages, ask for our brochure or a demo feeder!
SA Series Tape FeederAll the advantages of SSF feeders are now available with an easy protocol for your integration projects.● Lower profile than QF feeders● Reduced speed programmable● Full sets for easy integration available
Automatically feeds and peels media from liner and presents for pickupSee also Page 14
SA demo setup
AXIUM Media PresenterMore than just a label feeder
AdoptSMT News 64 - Page 11 of 20 - www.AdoptSMT.com
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Count On Tools StripFeeder.mod Manufactured to Jedec standards for most pick and place machines and Jedec tray feeders. Removable rails can easily be re-positioned on the base plate to fit different width component tapes.
Half the length of stripfeeder.mod enables you to place twice as many tape strips on the same area.
SSF SIPLACE compatible FeedersSSF SIPLACE compatible feedersHover-Davis SSF feeders offer many advantages including:● Smooth transport with stepper motor, designed to be shutterless● Complete range of components, including 0201 for 8mm feeders● Full compatibility, 8mm feeder available with standard pick-up
location and with SL pick-up location.
SSF06-08 3x8mm Feeder Upgrade Bonus
available!
Hover-Davis MP01-08 Dual Track 8mm Feeders compatible to Panasonic CM and NPM series machines deliver outstanding performance and value.Features:● Component feed range 01005 to 1210● Quick and easy tape loading with reverse
indexing. Shutterless top-load design simplifies cover tape handling.
● Reliable, motor tape drive and electronic pitch control
● Multiple Speed Modes for optimal component feeding stability
MP © compatible feedersPanasonic is a trademark of Panasonic Corporation
Many more advantages, ask for our brochure or a demo feeder!
We keep your SIPLACE running with compatible pick location
to Silver/Gold feeders
● Reduced speed programmable for poorly taped components● And many more. See our homepage or ask for a demonstration.
AdoptSMT News 64 - Page 12 of 20 - www.AdoptSMT.com
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
STENCIL PRINTING& SOLDER PREFORMS
CATALOG NOVEMBER 2017
- Catalog Stencil Printing & Solder Preforms E - 11/2017www.AdoptSMT.com
Solder Preforms
Stencil PrintingPlease check for our 16 page Catalog at AdoptSMT.com/#SectionLibrary or talk to your AdoptSMT sales contact and also request the pricelist.Test the AdoptSMT consumables for your stencil printing process:
REDUCED PRICE!AdoptSMT Material Type 5: 50g/m2, Structured Polypropylene, the honeycomb structure traps solder within its fibers.Comparable to DEK 800071, 800072, 800073
Cleaning fluids
NEW! AdoptSMT Premium Solder
Preforms launched successfully.
Save about 40% compared to other
suppliers!
Squeegees with drastically increased lifetime and better printing results
Under Stencil Cleaning Rolls
AdoptSMT News 64 - Page 13 of 20 - www.AdoptSMT.com
General Splice ProductsAdoptSMT supplies any splicing products, matching your feeders and your way of working. Some examples:
Multi SpliceJoin 20 tapes before you have to load the next Splice Clip Magazine!
The single splice clips of the AdoptSMT SPL-C/4000MST-A 20-fold Multi Splice Clip Magazine are joined by two small strips
which are cut during splicing and collected in a
waste basket.There is no risk of injury from scrap pieces of material sticking out of the splice tool.
Clip + Splice ESD Splice Sticker Splice Tapes for Fuji
Splice Tapes for Panasonic
Splice Clips Splice Stickers Splice Tapes on RollSplice Cutter
ConsumablesSpare PartsServiceFeedersMachines
Our splicing products keep your pick and
place machines running continuously!
Please look at our 12 page splicing catalog at AdoptSMT.com/#SectionLibrary to see many more splicing options.
AdoptSMT News 64 - Page 14 of 20 - www.AdoptSMT.com
Identification
Labels for Auto ApplyTo produce small size high temperature resistant labels for automatic application takes more than stamping paper labels to go on carton boxes. Nortec has been producing such high quality labels for many years and is now one of the most renowned producers of these labels. AdoptSMT is Nortecs distributor for most European markets. To use special applicators or label feeders increases efficiency and accuracy.Nortec labels are available preprinted or together with matching ribbons for thermal transfer print.If you have to mark your PCBs with labels, why not use your existing pick and place equipment and just add a Hover-Davis industry standard label feeder?
AXIUM Media Presenter More than just a label feeder
Reduce cost, improve quality and eliminate hand assembly. Pick and place labels, insulators, interconnect, shields, antennas and other adhesive backed media with the configurable AXIUM Media Presenter.
Available for these Pick and Place Brands:● Assembleon ● Panasonic● Essemtec ● Samsung● Fuji ● SIPLACE● Juki ● Universal● Mydata ● Yamaha.Easy to integrate to automation platforms.
Features:● Automatically feeds and peels media from liner and presents for
pickup ● Generic Media Platform is user configurable for most applications● Standard system presents 3x3mm up to 42x50mm media● Custom Module configurations available for < 3mm applications● Selectable speed modes assure optimal performance● Plug-and-Play models for most platforms and automation cells● Accepts legacy Label Feeder LMG modules for investment protection● Reliable, electronic motor drive and sensor positioning● Simple user interface with push-button controls● User serviceable modular design● Comprehensive 2-year warranty
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Please check for our 20 page Catalog at AdoptSMT.com/#SectionLibrary or talk to your
AdoptSMT sales contact and also request the pricelist.
AdoptSMT News 64 - Page 15 of 20 - www.AdoptSMT.com
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Identification
Labels and Thermal Transfer Label Printing
AdoptSMT is not only your reliable partner for all auto apply labels, but for all technical labels and the complete identification process including label printing and verification. Whenever you need durability against extreme temperatures or cleaning media and for outdoor use, Thermo Transfer Print is the first choice.Your easiest solution is to source ready printed labels from us. For this the information to be printed has to be available at the time of purchasing the labels. If the information is available only short term, you need to print at least this part of the information yourself.
LML Laser Marking High Temperature Labels
AdoptSMT supports your In-House Label Printing with:
Labels blank or pre-printed
Ribbon
Printing Software
Label Printer: selection of the right printer plus accessories, set up of the printing parameters
The LML takes the advantages of labels and laser marking and eliminates the limitations each of these separately have.Advantages:● Label protects the surface underneath from the laser.● Label can get applied automatically or manually before getting
printed.● Label can be placed on top of wrong or outdated laser mark.● Label is always the same material, no new laser adjustments
needed.● Based on Polyimide material, the label also withstands lead free
soldering after being laser marked.
AdoptSMT News 64 - Page 16 of 20 - www.AdoptSMT.com
Nortec high temperature masking labels are made out of polyimide like the Nortec high temperature Identification Labels, but are constructed with different adhesives which keep the labels on the PCB during wave soldering and reflow processes, but are still easily removable after these processes. These labels can be used for masking parts of the PCB during wave soldering or also as placement aid on top of SMT components.Masking labels are also available for automatic placement like identification labels!We have standard sizes available for manual apply and for auto apply, but can also produce special sizes and shapes to your needs.
Masking Labels and Masking Tapes
Polyimide Masking Tapes
Masking Labels
It is preferred to use masking labels in the right size to avoid the manual cutting process, but this isn’t always possible. We have therefore added polyimide masking tapes to our catalog and stock the common sizes, so we can help you fast with all your masking needs.
You have the choice, we can help you!
Placing odd form components automatically can be a challenge. Here are two examples, how we can help: with placement aids from Nortec or with special nozzles from Count On Tools.
as low as € 1.52 per roll!
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
FUME EXTRACTION SYSTEMSPUREX
AdoptSMT News 64 - Page 17 of 20 - www.AdoptSMT.com
Hand Soldering and Repair Soldering
Purex Fume Extraction Systems filter solder fumes and return the cleaned air into the room.● Protect employee health● No waste of energy to heat or cool the room● No pollution of the atmosphere, no problems with neighbors● No holes in the building requiredPurex Fume Extraction Systems are available in all sizes to suit the air filtration needs for any number of rework desks or soldering machines.
Desoldering BraidsFlux Removers
offers a full range of soldering tools including 10 different Premium Line models which can be get combined to form a station that covers all your personal requirements.
Cleaning Sprays and Wipes
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Replacement Solder Tips
AdoptSMT offers the full range of Plato replacement tips compatible to Weller©, Hakko©, Pace© and Ersa©
AdoptSMT News 64 - Page 18 of 20 - www.AdoptSMT.com
Solder Stations for free!
100% Scrapping Bonus Promotion prolonged.
Curie Heat Technology Principle: A powered on Soldering Cartridge gets heated by induction heating until an alloy in the Solder Tip reaches its Curie temperature. At this temperature it loses its magnetism which stops the heating. When the temperature of the Solder Tip drops below this Curie temperature, the material becomes magnetic again and the Tip gets heated again.
Hand Soldering and Repair Soldering
Solder Stations and Solder Tips working with the principle of Curie Heat Technology
No Overheating ◆ Fast Response Time ◆ No Calibration Necessary
TMT Soldering & Rework Stations
Available with 13.56 MHz and 470 kHz
NEW
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Complete Range of Hot Air Rework Tools
Tip cleaner with rotating brass brushes
Tip tinner
Thermaltronics soldering tools are distributed by AdoptSMT in many European countries. Please check the availability with us.
Prolong the lifetime of your tips and ensure the quality of your solder joints by correct nozzle care. These Thermaltronics products help you to do so:
Set including nozzles starting at EUR 169.70
Nozzles starting at EUR 5.40
Tip Care Products
AdoptSMT News 64 - Page 19 of 20 - www.AdoptSMT.com
Solder Robot
With the Thermaltronics R9800S we can now offer you a process safe and easy to program solder robot for an unbelievably affordable price.
Key Features:
- Offset correction by Vision System and Laser Height Measurement
- Curie Heat Technology provides precise temperature control
- High precision mechanics with servo motors and ball screws
- Separate Z axis for soldering head and solder wire feeder
- Advanced Software on MS Windows 7 professional
ConsumablesSpare PartsServiceFeedersMachines
We keep your Production
running!
Specifications
Camera View 290 x 200mmPCB Size Max. 200 x 200mmSoldering Region Max. 190 x 170mmZ1, Z2 Axis Range 70mmR Axis Range 360°X, Y, Z Axis Speed 0.1 – 300mm/secR Axis Speed 0.1 – 450°/secX, Y, Z Positioning Repeatability +/-0.01mmR Axis Positioning Repeatability +/-0.02°Solder Wire Diameter 0.3 – 1.6mmDimensions 620 (w) x 702 (d) x 800mm (h)Weight 125kg
See our demo unit at the AdoptSMT headquarters in Grödig near Salzburg or at our booth at SMT Nuremberg.
AdoptSMT News 64 - Page 20 of 20 - www.AdoptSMT.com
Phone +33-3 67 23 00 06Phone +43-6246-72440-174
Phone +48-58-340 60 04Phone +48-12-386 0326
Phone +36-20-390 4791Phone +43-6246-72440-166
Phone +43-664-80 72440-167
Phone +43-664-80 72440-167
Phone +43-6246-72440-192
Phone +43-6246-72440-148
Si vous parlez le français, contactezMichaela Heinke email MH2@AdoptSMT.comStefanie Heiß email SH@AdoptSMT.com
Kontakt w języku polskim:Tomasz Niedbała email TN@AdoptSMT.comoraz Claus Sternahl email CS2@AdoptSMT.com
Magyar nyelven. KapcsolatImre Benedekffy email IB@AdoptSMT.comEszter Mák email EM@AdoptSMT.com
Mluvíme česky. KontaktujtePetra Lieskovského email PL@AdoptSMT.com
Hovoríme po slovensky. KontaktujtePetra Lieskovského email PL@AdoptSMT.com
Мы говорим по-русски. КонтактируйтеViviana Lieskovska Тел. +43-6246-72440-186 эмаль VL@AdoptSMT.com
Per informazioni in italiano contattate:Giulio Politano email GP@AdoptSMT.com
Mi govorimo Bosanski, Hrvatski, Srpski. ContaktIvana Ilic email II@AdoptSMT.com
All
pric
es e
xclu
ding
VAT
. Tec
hnic
al a
ltera
tions
, erro
rs a
nd m
isprin
ts ex
cept
ed.
WE SPEAK YOUR LANGUAGE
Sprechen Sie auf Deutsch mit unseren Standorten in Österreich, Deutschland, Schweiz und Polen, siehe Firmendaten unten.
Speak to any of us in English, see the company data below.
AdoptSMT Europe GmbH Phone: +43-6246-72440-0 Fax: +43-6246-72550 Email: info@AdoptSMT.com Untersbergstr. 1 5082 Grödig near Salzburg, Austria
AdoptSMT Germany GmbH Phone: +49-5251-68939-0 Fax: +49-5251-68939-69 Email: Germany@AdoptSMT.com Halberstädter Str. 85a 33106 Paderborn, Germany
AdoptSMT Swiss AGPhone: +41-71-552 0151Fax: +41-71-552 0155Email: Swiss@AdoptSMT.comOberfeld 1 9464 Rüthi SG, Switzerland
AdoptSMT UK LtdPhone: +44-1293-827 880 Fax: +44-1293-774 632Email: Greatbritain@AdoptSMT.comUnit 30, Salbrook Road Industrial Estate Salfords Redhill RH1 5GJ UK
AdoptSMT France Sarl Phone: +33-3-672300 06 Fax: +33-3-672300 10Email: France@AdoptSMT.com 50 Avenue d'Alsace68025 Colmar Cedex, France
AdoptSMT Polska Sp. z o.o. Phone: +48-58-340 60 04 Fax: +48-58-340 60 05Email: Poland@AdoptSMT.com Sternicza 1580-523 Gdańsk, Poland
Please change your records to include the extra "-0" ! Without this "-0" our number is not reachable as phone providers switch to new protocols.
Recommended