View
1
Download
0
Category
Preview:
Citation preview
Features: Two independent SDH optical interfaces supporting STM-4/1 rates Add/drop featuring 21-E1s for PDH E1 and eight Fast Ethernet (FE) or one GE (Copper/Fiber) for Ethernet over SDH MSPP solutions in a compact 1U chassis facilitating better utilization of available rack space Low power consumption (20 watts) Tra�c aggregator Supports SDH frame structures in tributary path Each of the four STM-1s within the STM-4 can independently con�gured to accept AU3, TUG3s in AU4. Each TUG2 can independently con�gured to accept any one of the three tributary types (TU11, TU12, and TU3) Supports cross-connects among VC4-4c, VC4, VC3, VC12 level, FE to SFP, FE to FE, E1 to SFP, E1 to E1, SFP to SFP, and GE to SFP SEC compliant timing synchronization with ability to time from line, BITS, E1, or internal reference Web based secured control and status monitoring support Operating temperature 0° C to 70° C
Interfaces: Two STM-4/1 SFP interfaces with line protection via �ber optics One GE interface via SFP or RJ45 connector Eight FE (10/100) via RJ45 21 E1s via RJ45 connectors Two 2.5G ESSI Expansion ports via high speed SATA connectors Two (10/100/1000) RJ45 interfaces for LAN and console connections
ADM400 SDHAdd-Drop Multiplexer/MSPP
ADM400
w w w . p l e x s t a r . c o m
Product Overview:The Plexstar ADM400 is a highly integrated Add-drop Multiplexer (ADM)/Multiservice Provisioning Platform solution in a compact 1U chassis. There are two independent SDH optical interfaces supporting STM-4/1 rates. The add/drop features 21-E1s, eight Fast Ethernet (FE) ports or one Gigabit Ethernet (GE over Copper/Fiber) port for PDH E1 and Ethernet over SDH. It contains 2.5G non-blocking memory-based cross-connect with MAPS™ support for APS. It provides SDH mapping and de-mapping for Ethernet and E1. The ADM400 is con�gured and managed by web based feature rich GUI.
PWR
A
+12VDC /4A
-48VDC /1A
CLOCK
A B 1 2
27
28 26 24 22 20 18 16 14 12
11 9 7 5 3 1
2
FM-2
46810
25 23 21 19 17 15 13
ESSISERIALRX TXB
Monitoring & Maintenance: Local and network NMS (central or hosted) support for con�guration, alarm monitoring, reporting, and status display Remote software upgrade Built-in diagnostic tools are available to isolate errors in the network, such as, Error reporting, status display Loopback (In-loop/out-loop for all ports and all levels of cross-connect) Trace message generation and display Overhead bytes display and manipulation, etc. Full analyzer function is implemented in each optical interface including trace messages read/write, overhead bytes monitor/control, etc.
Timing & Synchronization: Supports timing synchronization options from the SDH line, a BITS E1 interface, any of the E1 recovered clocks, or an internal reference. A combination of a digital PLL and an analogue PLL are used to meet the system requirements for synchronization, holdover, and jitter Meets the ITU-T G.812 and G.813 timing requirements for STM-4 and STM-1. It also complies with the global timing requirements
Protection: 1+1 line protection and 1+1 power redundancy MSP between SFP1 and SFP2 Seven groups of SNCP between any VT1.5 (SFP1 and SFP2) and any two T1 ports Seven groups of SNCP between any one T1 and any two T1 ports
Power: Input power: 110/220VAC or -48VDC Power consumption: 20 watts Dual power input
Physical Dimension: Size: 19" x 11" x 1U Weight: 7.5 pounds
209 SH 121 Bypass, Suite-35, Lewisville, TX 75067, USATel: +1 (972) 318-2922, (972) 318-2900, Email: info@plexstar.com, Web: www.plexstar.com
XC1600/XC1610
Mobile 3G/4G Backhaul
ADM400/WDM109/DWDM116
Banks Banks / ATM
OTN6400/DWDM116
WDM109/DWDM116 ADM400
WDM109/DWDM116
BusinessE1 Data/InternetVideo ConferenceTelephone
HomeIPTVTelephone/InternetOnline GamingVideo ConferenceHNB GW100
HNB2000
MC1000
NFS 1000 NMS 1000
HNB0200HNB0020
HNB SGW10 HNB MS100
SMART PHONE
SMART PHONE
4G LTE
4G LTE
4G LTE
MPLS-TP MPLS-TP
MGW1000
Media Gateway
Cloud
Recommended