ADA Ramp - Deck and Leg Set Up Guide for 282A019 - 24” (61 ... 282A019 ADA Ramp Setup.pdf · LDB...

This guide shows assembled component placement only, see the Assembly Instructions for assembly procedures.

ADA Ramp - Deck and Leg Set Up Guidefor 282A019 - 24” (61 cm) Elevation Ramp

with Right Hand Switchback and Left Hand Landing

1Deck

2Deck

3LHRail

Wenger Corporation555 Park Drive, P.O. Box 448Owatonna, MN 55060 U.S.A.(800) 4WENGER (493-6437) 1-507-455-4100wengercorp.com

12-1/2”(32 cm)Deck

Elevation

24”(61 cm)Seam

Elevation

12-1/2”(32 cm)Deck

Elevation

24”(61 cm)Deck

Elevation

3Deck

6Deck

7Deck

5Deck

4Deck

1Deck

2Deck

3Deck

6Deck

7Deck

5Deck

4Deck

24”(61 cm)Deck

Elevation

Dow

n from S

witchback

Up from

Sw

itchback

©Wenger Corporation 2016 Printed in USA 06/16 Part #282A298-01

SBRail

SwitchbackBracket

4LHRail

2LHRail

2RHRail

5RHRail

5LHRail

1LHRail

1RHRail

6RHRail 6LH

Rail

LDBRail

LDARail

LDCRail

12-1/2”(32 cm)Seam

Elevation

12-1/2”(32 cm)Seam

Elevation

24”(61 cm)Seam

Elevation

20-1/2”(52 cm)Seam

Elevation

20-1/2”(52 cm)Seam

Elevation

4-1/2”(12 cm)Seam

Elevation

4-1/2”(12 cm)Seam

Elevation

Shown with optional Mid Rails

To Stage

SwitchbackDown BracketPre-attached

to Deck 3

Flat FootLeg

Flat FootLeg

RailPocket

RailPocket

RailPocket

RailPocket

SwivelFoot Leg

Leg heights may need to be adjusted to accommodate elevation changes and differences.

Up BracketPre-attached

to Deck 4

Two Leg DeckConnector

Down BracketPre-attached

to Deck 7

Rampto Deck

Connector

FlatFoot LegwithoutInsert

FlatFoot LegwithoutInsert

Flat FootLeg

Flat FootLeg

ADA Ramp - Rail Set Up Guide for 282A019 - 24” (61 cm) Elevation Ramp

with Right Hand Switchback and Left Hand Landing

Wenger Corporation555 Park Drive, P.O. Box 448Owatonna, MN 55060 U.S.A.(800) 4WENGER (493-6437) 1-507-455-4100wengercorp.com

©Wenger Corporation 2016 Printed in USA 06/16 Part #282A298-01

Shown without optional Mid Rails

3LH

SB

4LH

2LH

2RH

5RH

5LH

1LH

1RH

6RH

6LH

LDBLDA

LDC

Toe Kicks always toward inside

1RHApproachInside Rail

2RH8’ RH Inside

Switchback Down Rail

1LHApproach

Outside Rail

2LH8’ LH Outside

Switchback Down Rail

3LH 5’ LH Outside

Switchback LandingDown Rail

6RH42” RH Inside

Landing Up Rail5RH

8’ RH InsideSwitchback Up Rail

LDB 5’ RH Inside

Landing Down Rail

LDC RH No Turn

Top Landing Rail

SB8’ SwitchbackLanding Rail

6LH 42” LH OutsideLanding Up Rail5LH

8’ LH OutsideSwitchback Up Rail

4LH5’ LH Outside

Switchback LandingUp Rail

LDALH Turn

Top Landing Rail

This guide shows assembled component placement only,see the Assembly Instructions for assembly procedures.