View
215
Download
0
Category
Preview:
DESCRIPTION
All Constant Voltage Drivers UL Listed
Citation preview
LED DRIVERSCONSTANT VOLTAGE
CATALOG
www.aceleds.com
DimensionsLength 15.55"
Width 1.49"
Height 1.14"
Mounting Length 15.23"
Weight xx lbs.
Case Qty. xx pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
100W 110W0.98A @ 120V 0.42A @ 277V
>0.95 <10% 24V ±5%4200mA
±10%90° C -40° C 90% 0 to 10V
10 to 100%
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <90°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2.5 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 25 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
©2014Revised 04/20/2015
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
Constant Voltage LED Driver
Model Number ACA100VD24H4.1CInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
RoHSCOMPLIANTL E A D - F R E E
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
New Improved - Effective June 1, 2015
LLCDESIGN
DimensionsLength 9.5"
Width 2.4"
Height 1.6"
Mounting Length 8.9"
Weight 2.64 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power Max
Input Current
Input Power
Minimum PF
(full load)
Max. THD
(full load)
Output Voltage
Output Current
T case Maxi-mum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
150W1.48A @ 120V 0.62A @ 277V
163 >0.95 <20% 36V ±5%4200mA
±10%90° C -40° C 92% 0 to 10V
0 to 100%
IP66
150W1.48A @ 120V 0.62A @ 277V
163 >0.95 <20% 30V ±5%500mA
±5%90° C -40° C 92% 0 to 10V
0 to 100%
IP66
• UL Recognized• cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <90°C
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2.5 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Wiring Lead LengthsWhite 5.9" Red 5.9" Brown 5.9" Gray 5.9"
Black 5.9" Blue 5.9" Orange 5.9" Purple 5.9"
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
©2015Revised 04/20/2015
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
A division of AC Electronics
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A150VD36H4.2Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
New Improved - Effective June 1, 2015
LLCDESIGN
DimensionsLength 9.5"
Width 2.4"
Height 1.46"
Mounting Length 8.9"
Mounting Hole Distance 1.5"
Mounting Hole Diameter .20"
Weight 1.98 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
100W0.98A @ 120V 0.42A @ 277V
>0.95 <10% 24V ±5%0.41 to 4.1A
90° C -40° C 87% 0 to 10V10 to 100%
IP66
• UL US Class 2• cUL LVLE• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
©2015Revised 04/16/2015
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
Constant Voltage LED Driver
Model Number AC100VD24A4.1PGInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
RoHSCOMPLIANTL E A D - F R E E
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
E332747Class 2
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
OutputPower
Input Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
100W 110W0.98A @ 120V 0.42A @ 277V 0.95 10% 24V ±5%
4200mA±10%
90° C -40° C 90% IP67
• UL and cUL certified• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of 90°C;
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2.5 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 2.4"
Height 1.61"
Mounting Length 8.9"
Mounting Hole Distance 1.5"
Mounting Hole Diameter .20"
Weight 1.98 lbs.
Case Qty. 20 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 25 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Constant Voltage LED Driver
Model Number AC-A100V24I4.1Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
©2015Revised 04/20/2015
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Lead LengthsBlack 12" Blue 24"
White 12" Red 24" Green 12"
• Input SJTW Type 18AWG wires, pre-stripped: 1.125”; unwrapped: .125”• Output wires 24” pre-stripped: 1.125”; unwrapped: .125”
New Improved - Effective June 1, 2015
LLCDESIGN
DimensionsLength 9.5"
Width 2.4"
Height 1.6"
Mounting Length 8.9"
Weight 2.64 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power Max
Input Current
Input Power
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
IP Rating
150W1.48A @ 120V 0.62A @ 277V
163W >0.95 <20% 36V ±5%4200mA
±10%90° C -40° C 92% IP66
150W1.48A @ 120V 0.62A @ 277V
163W >0.95 <20% 30V ±5%500mA±10%
90° C -40° C 92% IP66
• UL Recognized• cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 25 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead Lengths - 1.5" StrippedWhite 5.9" Red 5.9" Brown 5.9"
Black 5.9" Blue 5.9" Orange 5.9"
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2015Revised 04/20/2015
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
A division of AC Electronics
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A150V36H4.21Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
New Improved - Effective June 1, 2015
LLCDESIGN
DimensionsLength 9.5"
Width 2.4"
Height 1.6"
Mounting Length 8.9"
Weight 2.64 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power Max
Input Current
Input Power
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
IP Rating
150W1.48A @ 120V 0.62A @ 277V
172W >0.95 <20% 36V ±5% 4.2A 90° C -40° C 89% IP66
150W1.48A @ 120V 0.62A @ 277V
172W >0.95 <20% 30V ±5% 5A 90° C -40° C 89% IP66
• UL Recognized• cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Wiring Lead LengthsWhite 5.9" Red 5.9" Brown 5.9"
Black 5.9" Blue 5.9" Orange 5.9"
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 04/07/14
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A150V36H4.2Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
DimensionsLength 9.5"
Width 2.4"
Height 1.46"
Mounting Length 8.9"
Mounting Hole Distance 1.5"
Mounting Hole Diameter .20"
Weight 1.98 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
100W0.98A @ 120V 0.42A @ 277V
>0.95 <10% 24V ±5%0.41 to 4.1A
90° C -40° C 87% 0 to 10V10 to 100%
IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
©2014Revised 01/21/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
P O W E R D E S I G N SLEDee s
TM
Constant Current LED Driver
Model Number AC-A100VD24H4.1Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
RoHSCOMPLIANTL E A D - F R E E
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
WIRING:
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
100W0.98A @ 120V 0.42A @ 277V
>0.98 <10% 24V ±5%0.41
to 4.1A90° C -40° C 88% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 2.4"
Height 1.46"
Mounting Length 8.9"
Mounting Hole Distance 1.5"
Mounting Hole Diameter .20"
Weight 1.98 lbs.
Case Qty. 20 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 02/17/14
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A100V24H4.1Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
WIRING:
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
60W0.6A @ 120V
0.26A @ 277V>0.95 <20% 24V ±5%
0.25 to 2.5A
90° C -40° C 87% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 02/17/14
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A60V24H2.5Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
60W0.61A @ 120V 0.27A @ 277V
>0.95 <10% 12V ±5%0.5
to 5A90° C -40° C 83.7% 0 - 10V 100% - 10% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
©2014Revised 02/01/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A60VD12H5.0Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
WIRING:
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
60W0.6A @ 120V
0.26A @ 277V>0.95 <20% 24V ±5%
0.25 to 2.5A
90° C -40° C 87% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 02/17/14
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A60V24H2.5Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
WIRING:
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
60W0.61A @ 120V 0.27A @ 277V
>0.95 <15% 12V ±5%0.5
to 5A90° C -40° C 87% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 02/17/14
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-A60V12H5.0Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
ELECTRICAL SPECIFICATIONS:
DimensionsLength 6.77"
Width 2.40"
Height 1.22"
Mounting Length 6.22"
Mounting Hole Distance 1.26"
Mounting Hole Diameter .28"
Weight 1.05 lbs.
Case Qty. 40 pcs.
WIRING: PHYSICAL:
•ULandcULRecognized•UL1310Class2•ULOutdoorType1•ClassAsoundrating•OverloadProtection
SAFETY:•Warranty:5yrsbasedonmaxcasetempof<75°C;3yrsbasedonmaxcasetempof90°C*•Input/OutputIsolation•FCCTitle47CFRPart15•SurgeProtection(2KV)
•Open/ShortCircuitProtection•LEDdriverhasalifeexpectancyof50,000hoursatTcaseof≤75°C•LEDdriverhasalifeexpectancyof100,000hoursatTcaseof≤65°C
INSTALLATION:•LEDdriversshallbeinstalledinsideelectricalenclosures •MaxRemoteinstallationdistanceis18ft•18AWG600V/105Ctinnedstrandcopperlead-wiresarerequiredforinstallation • LEDdrivercasesshouldbegrounded
OutputPower
InputCurrent
MinPF(fullload)
MaxTHD(fullload)
OutputVoltage
OutputCurrent
TcaseMax
Minimum StartingTemp
EfficiencyUpTo
IPRating
50W0.49A@120V0.21A@277V
>0.95 <10% 24V±5%0.21
to2.1A90° C -40°C 86.2% IP66
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
ConstantVoltageLEDDriver
Model Number AC-A50V24H2.1CInputVoltage:120-277VInputFrequency:50/60HzSideMount/Leads
©2014Revised02/17/14
*ACElectronics/ACLEDPowerDesignswarrantstothepurchaserthateachLEDDriverwillbefreefromdefectsinmaterialorworkmanshipforaperiodof5yearswhenoperatedatmaxcasetempofupto<75°C;3yearsfromdateofmanufacturewhenoperatedatamaxcasetempofupto90°Cwhenproperlyinstalledandundernormalconditionsofuse.Seeaceleds.comforcompletewarrantypolicy.
P O W E R D E S I G N SLEDee s
TM
RoHSCOMPLIANTL E A D - F R E E
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
25W0.26A @ 120V 0.12A @ 277V
>0.95 <10% 24V ±5%0.104
to 1.04A90° C -40° C 82% 0 to 10V
10 to 100%
IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
Dimming
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A25VD24H1.04Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
WIRING: PHYSICAL:
•ULandcULRecognized•UL1310Class2•ULOutdoorType1•ClassAsoundrating•OverloadProtection
ELECTRICAL SPECIFICATIONS:
SAFETY:•Warranty:5yrsbasedonmaxcasetempof<75°C;3yrsbasedonmaxcasetempof90°C*•Input/OutputIsolation•FCCTitle47CFRPart15•SurgeProtection(2KV)
•Open/ShortCircuitProtection•LEDdriverhasalifeexpectancyof50,000hoursatTcaseof≤75°C•LEDdriverhasalifeexpectancyof100,000hoursatTcaseof≤65°C
OutputPower
InputCurrent
MinimumPF
(fullload)
Max.THD(fullload)
OutputVoltage
OutputCurrent
TcaseMaximum
MinimumStartingTemp.
EfficiencyUpTo
DimmingProtocol
DimmingRange
IPRating
25W0.27A@120V0.12A@277V
>0.95 <10% 12V±5%0.21to2.08A
90°C -40°C 80% 0to10V 10to100% IP66
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
MountingLength 8.9"
MountingHoleDistance 1.0"
MountingHoleDiameter .20"
Weight 1.32lbs.
CaseQty. 30pcs.
INSTALLATION:•LEDdriversshallbeinstalledinsideelectricalenclosures •MaxRemoteinstallationdistanceis18ft•18AWG600V/105Ctinnedstrandcopperlead-wiresarerequiredforinstallation • LEDdrivercasesshouldbegrounded
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
©2014Revised01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
P O W E R D E S I G N SLEDee s
TM
ConstantVoltageLEDDriver
Model Number AC-A25VD12H2.08InputVoltage:120-277VInputFrequency:50/60HzSideMount/Leads
*ACElectronics/ACLEDPowerDesignswarrantstothepurchaserthateachLEDDriverwillbefreefromdefectsinmaterialorworkmanshipforaperiodof5yearswhenoperatedatmaxcasetempofupto<75°C;3yearsfromdateofmanufacturewhenoperatedatamaxcasetempofupto90°Cwhenproperlyinstalledandundernormalconditionsofuse.Seeaceleds.comforcompletewarrantypolicy.
RoHSCOMPLIANTL E A D - F R E E
DimensionsLength 4.9"
Width 2.5"
Height 1.14"
Mounting Length 4.48"
Mounting Hole Distance 1.57"
Mounting Hole Diameter .20"
Weight .61 lbs.
Case Qty. 40 pcs.
ELECTRICAL SPECIFICATIONS:
WIRING: PHYSICAL:
Output PowerInput
CurrentMin PF
(full load)Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
25W0.26A @ 120V 0.12A @ 277V
>0.95 <10% 24V ±5%0.104
to 1.04A90° C -40° C 80%
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A25V24H1.04CInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
WIRING: PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.22"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
25W0.26A @ 120V 0.12A @ 277V
>0.95 <15% 24V ±5%0.104
to 1.04A90° C -40° C 82% IP66
• UL and cUL Recognized• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
RoHSCOMPLIANTL E A D - F R E E
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A25V24H1.04Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Input Voltages
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
120V to 277V50/60Hz
0.27A @ 120V 0.12A @ 277V
0.95 15% 12V ±5%0.21
to 2.08A90° C -40° C 81.5% IP66
• UL and cUL certified• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 1.7"
Height 1.2"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A25V12H2.08Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
ELECTRICAL SPECIFICATIONS:
DimensionsLength 4.21"
Width 1.41"
Height 1.14"
Mounting Length 3.9"
Weight .44 lbs.
Case Qty. 100 pcs.
WIRING: PHYSICAL:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
20W0.2A @ 120V 0.09A @ 277V
>0.9 <20% 12V ±5%0.16
to 1.66A90° C -40° C 84% IP66
• UL and cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection• No PCBs
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A20V12H1.67MInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
ELECTRICAL SPECIFICATIONS:
DimensionsLength 4.21"
Width 1.41"
Height 1.14"
Mounting Length 3.9"
Weight .44 lbs.
Case Qty. 100 pcs.
WIRING: PHYSICAL:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
12W0.14A @ 120V 0.06A @ 277V
>0.9 <25% 36V ±5%0.03
to 0.33A90° C -40° C 78.6% IP66
• UL and cUL Recognized, Class 2• UL Outdoor Type 1• Class A sound rating• No PCBs• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A12V36H0.33MInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
ELECTRICAL SPECIFICATIONS:
DimensionsLength 4.21"
Width 1.41"
Height 1.14"
Mounting Length 3.9"
Weight .44 lbs.
Case Qty. 100 pcs.
WIRING: PHYSICAL:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
12W0.122A @ 120V 0.055A @ 277V
>0.90 <15% 24V ±5%0.05
to 0.5A90° C -40° C 78.6% IP66
• UL and cUL Recognized, Class 2• UL Outdoor Type 1• Class A sound rating• No PCBs• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 01/14/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A12V24H0.5MInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
ELECTRICAL SPECIFICATIONS:
DimensionsLength 6.22"
Width 1.73"
Height 1.22"
Mounting Length 5.87"
Mounting Hole Distance 1.02"
Mounting Hole Diameter .20"
Weight .75 lbs.
Case Qty. 50 pcs.
WIRING: PHYSICAL:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
12W0.14A @ 120V 0.06A @ 277V
0.95 15% 24V ±5%0.05
to 0.5A90° C -40° C 74% IP66
• UL and cUL certified• UL1310 Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation • LED driver cases should be grounded
Constant Voltage LED Driver
Model Number AC-A12V24H0.5Input Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
©2014Revised 07/22/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
RoHSCOMPLIANTL E A D - F R E E
ELECTRICAL SPECIFICATIONS:
DimensionsLength 4.21"
Width 1.41"
Height 1.14"
Mounting Length 3.9"
Weight .44 lbs.
Case Qty. 100 pcs.
WIRING: PHYSICAL:
Input Voltages
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
120V to 277V50/60Hz
0.124A @ 120V 0.06A @ 277V
>0.90 <20% 12V ±5% 0.1 - 1A 90° C -40° C 80% IP66
• UL and cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection• No PCBs
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
©2014Revised 02/07/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-A12V12H1.0MInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
DimensionsLength 9.5"
Width 2.4"
Height 1.6"
Mounting Length 8.9"
Weight 2.43 lbs.
Case Qty. 20 pcs.
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power Max
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
150W1.48A @ 120V 0.62A @ 277V
>0.95 <20% 36V ±5% 4.2A 90° C -40° C 89% 0 to 10V5 to 100%
IP66
• UL Recognized• cUL Recognized• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Wiring Lead LengthsWhite 5.9" Red 5.9" Gray 5.9"
Black 5.9" Blue 5.9" Purple 5.9"
©2014Revised 04/07/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Dimming
P O W E R D E S I G N SLEDee s
TM
Constant Voltage LED Driver
Model Number AC-150VD36AEBInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
WIRING: PHYSICAL:
•ULRecognized•cULRecognized•ULOutdoorType1•ClassAsoundrating•OverloadProtection
SAFETY:•Warranty:5yrsbasedonmaxcasetempof<75°C;3yrsbasedonmaxcasetempof90°C*•Input/OutputIsolation•FCCTitle47CFRPart15•SurgeProtection(2KV)
•Open/ShortCircuitProtection•LEDdriverhasalifeexpectancyof50,000hoursatTcaseof≤75°C•LEDdriverhasalifeexpectancyof100,000hoursatTcaseof≤65°C
DimensionsLength 9.5"
Width 2.4"
Height 1.6"
MountingLength 8.9"
Weight 2.43lbs.
CaseQty. 20pcs.
INSTALLATION:•LEDdriversshallbeinstalledinsideelectricalenclosures •MaxRemoteinstallationdistanceis18ft•18AWG600V/105Ctinnedstrandcopperlead-wiresarerequiredforinstallation • LEDdrivercasesshouldbegrounded
ELECTRICAL SPECIFICATIONS:
©2014Revised04/07/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
OutputPowerMax.
InputCurrent
InputPower
MinimumPF
(fullload)
Max.THD
(fullload)
OutputVoltage
OutputCurrent
TcaseMax.
MinimumStartingTemp.
EfficiencyUpTo
SurgeProtection
IPRating
150W1.48A@120V0.62A@277V
172W >0.95 <20% 36V±5% 4.2A 90°C -40°C 89% 2KV 66
Lead LengthsBlack 5.9" Blue 5.9"
White 5.9" Red 5.9"
P O W E R D E S I G N SLEDee s
TM
ConstantVoltageLEDDriver
Model Number AC-150V36AEAInputVoltage:120-277VInputFrequency:50/60HzSideMount/Leads
RoHSCOMPLIANTL E A D - F R E E
*ACElectronics/ACLEDPowerDesignswarrantstothepurchaserthateachLEDDriverwillbefreefromdefectsinmaterialorworkmanshipforaperiodof5yearswhenoperatedatmaxcasetempofupto<75°C;3yearsfromdateofmanufacturewhenoperatedatamaxcasetempofupto90°Cwhenproperlyinstalledandundernormalconditionsofuse.Seeaceleds.comforcompletewarrantypolicy.
WIRING: PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Weight xx lbs.
Case Qty. xx pcs.
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Input Power
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Min. Starting Temp
Efficiency Up To
Dimming Protocol
Dimming Range
60W0.2A @ 347V
71W >0.9 <20% 36V ±5%1.67 to
0.167A90° C -40° C 88% 0 to 10V
10 to 100%
• UL and cUL Recognized• Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• IP 66 Harsh Weatherproof• Max Remote installation distance is 18 ft• LED driver cases should be grounded
• LED drivers shall be installed inside electrical enclosures• 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 10/1/2014
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-60VD36B1.7LW Input Voltage: 347VInput Frequency: 50/60HzSide Mount/Leads
Dimming
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
WIRING: PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Minimum PF
(full load)
Max. THD(full load)
Output Voltage
Output Current
T case Maximum
Minimum Starting Temp.
Efficiency Up To
Dimming Protocol
Dimming Range
IP Rating
60W0.6A @ 120V
0.26A @ 277V>0.95 <10% 24V ±5%
0.25 to 2.5A
90° C -40° C 86.6% 0 to 10V10 to 100%
IP66
• UL and cUL Recognized, Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection• No Exterior Case
SAFETY:• Warranty: 3 yrs based on max case temp of <70°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 75,000 hours at Tcase of ≤70°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 38 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
Dimming
©2014Revised 04/04/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
Lead LengthsBlack 5.9" Purple 5.9"
White 5.9" Gray 5.9" Green 5.9"
DimensionsDiameter 6.36" Weight 1.32"
Height 1.32" Case Qty. 30 pcs.
Mounting Hole Distance 5.04"
Mounting Hole Diameter 0.141"
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 3 years when operated at max case temp of up to <70°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-60VD24H2.5DKInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
ELECTRICAL SPECIFICATIONS:
DimensionsLength 12.8"
Width 1.34"
Height 1.14"
Mounting Length 12.5"
Weight xx lbs.
Case Qty. xx pcs.
WIRING: PHYSICAL:
•ULandcULRecognized•UL1310Class2•ULOutdoorType1•ClassAsoundrating•OverloadProtection
SAFETY:•Warranty:5yrsbasedonmaxcasetempof<75°C;3yrsbasedonmaxcasetempof90°C*•Input/OutputIsolation•FCCTitle47CFRPart15•SurgeProtection(2KV)
•Open/ShortCircuitProtection•LEDdriverhasalifeexpectancyof50,000hoursatTcaseof≤75°C•LEDdriverhasalifeexpectancyof100,000hoursatTcaseof≤65°C
INSTALLATION:•LEDdriversshallbeinstalledinsideelectricalenclosures •MaxRemoteinstallationdistanceis18ft•18AWG600V/105Ctinnedstrandcopperlead-wiresarerequiredforinstallation • LEDdrivercasesshouldbegrounded
*ACElectronics/ACLEDPowerDesignswarrantstothepurchaserthateachLEDDriverwillbefreefromdefectsinmaterialorworkmanshipforaperiodof5yearswhenoperatedatmaxcasetempofupto<75°C;3yearsfromdateofmanufacturewhenoperatedatamaxcasetempofupto90°Cwhenproperlyinstalledandundernormalconditionsofuse.Seeaceleds.comforcompletewarrantypolicy.
OutputPower
InputCurrent
MinPF(fullload)
MaxTHD(fullload)
OutputVoltage
OutputCurrent
TcaseMax
MinimumStartingTemp
EfficiencyUpTo
IPRating
DimmingRange
DimmingProtocol
60W0.6A@120V0.26A@277V
>0.95 <10%24V±5%
0.25to2.5A
90°C -40°C 86.6% IP66 10-100% 0-10V
©2014Revised03/20/14
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
ConstantVoltageLEDDriver
Model Number AC-60VD24AERInputVoltage:120-277VInputFrequency:50/60HzSideMount/Leads
Lead LengthsBlack 5.9" Blue 5.9" Purple 5.9"
White 5.9" Red 5.9" Gray 5.9"
RoHSCOMPLIANTL E A D - F R E E
P O W E R D E S I G N SLEDee s
TM
Dimming
WIRING: PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Weight xx lbs.
Case Qty. xx pcs.
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Input Power
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Min. Starting Temp
Efficiency Up To
Dimming Protocol
Dimming Range
60W0.2A @ 347V
71W >0.9 <20% 12V ±5%0.5
to 5A90° C -40° C 88% 0 to 10V
10 to 100%
• UL and cUL Recognized• Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• IP 66 Harsh Weatherproof• Max Remote installation distance is 18 ft• LED driver cases should be grounded
• LED drivers shall be installed inside electrical enclosures• 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 10/1/2014
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-60VD12B5.0LU Input Voltage: 347VInput Frequency: 50/60HzSide Mount/Leads
Dimming
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
WIRING: PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Weight xx lbs.
Case Qty. xx pcs.
ELECTRICAL SPECIFICATIONS:
Output PowerRange
Input Current
Input Power
Min PF (full load)
Max THD (full load)
Output Voltage
Output CurrentT case Max
Min. Starting Temp
Efficiency Up To
Dimming Protocol
Dimming Range
6-60W0.6@120V
0.26@277V71W >0.95 <10% 48V ±5% 0.125 to 1.25A 90° C -40° C 88% 0 to 10V 10 to 100%
• UL and cUL Recognized• Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of <90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• IP 66 Harsh Weatherproof• Max Remote installation distance is 18 ft• LED driver cases should be grounded
• LED drivers shall be installed inside electrical enclosures• 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2014Revised 12/15/2014
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC60VD48A1.25NA Input Voltage: 120-277VacInput Frequency: 50/60HzSide Mount/Leads
preliminary spec
Dimming
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
WIRING: PHYSICAL:
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Weight xx lbs.
Case Qty. xx pcs.
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Input Power
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Min. Starting Temp
Efficiency Up To
Dimming Protocol
Dimming Range
60W0.2A @ 347V
71W >0.9 <20% 48V ±5%1.67 to
0.167A90° C -40° C 88% 0 to 10V
10 to 100%
• UL and cUL Recognized, Class 2• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
INSTALLATION:• IP 66 Harsh Waterproof• Max Remote installation distance is 18 ft• LED driver cases should be grounded
• LED drivers shall be installed inside electrical enclosures• 18 AWG 600V/105C tinned stranded copper lead-wires are required for installation
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2015Revised 01/26/2015
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-60VD48B1.2LX Input Voltage: 347VInput Frequency: 50/60HzSide Mount/Leads
Dimming
Lead LengthsBlack 5.9" Blue 5.9" Purple 9.8"
White 5.9" Red 5.9" Gray 9.8"
E328847Class 2
H
W
ML
WIRING:
Wiring Lead LengthsWhite 5.9"
Black 5.9"
Red 5.9"
Blue 5.9"
PHYSICAL:
ELECTRICAL SPECIFICATIONS:
Output Power
Input Current
Min PF (full load)
Max THD (full load)
Output Voltage
Output Current
T case Max
Minimum Starting Temp
Efficiency Up To
IPRating
60W0.6A @ 120V
0.26A @ 277V>0.95 <20% 24V ±5%
0.25 to 2.5A
90° C -40° C 87% IP66
• UL US Class 2• cUL LVLE• UL Outdoor Type 1• Class A sound rating• Overload Protection
SAFETY:• Warranty: 5 yrs based on max case temp of <75°C; 3 yrs based on max case temp of 90°C*
• Input/Output Isolation• FCC Title 47 CFR Part 15• Surge Protection (2 KV)
• Open/Short Circuit Protection• LED driver has a life expectancy of 50,000 hours at Tcase of ≤75°C
• LED driver has a life expectancy of 100,000 hours at Tcase of ≤65°C
DimensionsLength 9.5"
Width 1.7"
Height 1.14"
Mounting Length 8.9"
Mounting Hole Distance 1.0"
Mounting Hole Diameter .20"
Weight 1.32 lbs.
Case Qty. 30 pcs.
INSTALLATION:• LED drivers shall be installed inside electrical enclosures • Max Remote installation distance is 18 ft• 18 AWG 600V/105C tinned strand copper lead-wires are required for installation • LED driver cases should be grounded
3401 Avenue D, Arlington, TX 76011 • 800-375-6355 • www.aceleds.comData is based upon tests performed by AC Electronics in a controlled environment and representative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
©2015Revised 04/16/2015
*AC Electronics/AC LED Power Designs warrants to the purchaser that each LED Driver will be free from defects in material or workmanship for a period of 5 years when operated at max case temp of up to <75°C; 3 years from date of manufacture when operated at a max case temp of up to 90°C when properly installed and under normal conditions of use. See aceleds.com for complete warranty policy.
RoHSCOMPLIANTL E A D - F R E E
Constant Voltage LED Driver
Model Number AC-60V24A2.5PFInput Voltage: 120-277VInput Frequency: 50/60HzSide Mount/Leads
P O W E R D E S I G N SLEDee s
TM
A division of AC Electronics
E332747Class 2
Recommended