View
112
Download
6
Category
Tags:
Preview:
Citation preview
TOTAL COVERAGE FOR
In-Building Tunnels & Subways Urban Shadowed Areas Isolated Valleys Rural Areas
GSM CDMA TDMA PCS SMR
ubiquitous voice & data coverage solutions
www.shyamtelecom.com
Shyam Telecom GmbH
Mainaschaffer Str. 113, D-63741 Aschaffenburg, Germany
Tel. +49 6021 45 90 10, Fax: +49 6021 45 90 129
Shyam Telecom Inc.
6 Kilmer Road, Suite D, Edison, NJ 08817, USA
Tel: +1 732 985 1324, Fax: +1 732 907 1023
Shyam Telecom Ltd.
246 Udyog Vihar, Phase IV, Gurgaon, India
Tel: +91 124 4311600, Fax: +91 124 4018116
E-mail : contact@shyamtelecom.com
SHYAM is the oldest specialized Indian company for Antenna Electronic, R.F. Communication System. Together with its sister telecom operator companies employees more than 1000 people.
SHYAM is the unique company, which has 30 years of experience in designing, Reception & Distribution of RF signals, 8 Years experience as GSM operator, 7 Years experience as V-Sat operator & 6 Years experience as CDMA operator.
All our system components are technically harmonized to each other, so as to guarantee the best physically possible transmission quality.
Nevertheless, because of the size of our undertaking we are also highly flexible- which is just what the market in today’s rapidly changing times demands. The construction of systems consisting of hundreds of different components, which must all form a functional whole at give time and specific place demands a high degree of mobility and logistic skill
Our company philosophy is faithful to its chosen motto “Quality makes it’s way” what we think, what we do and what we make are all highly professional.
We tailor-made to the whishes and specifications of our customers Outdoor coverage solutions & In Building Systems. We guarantee the systems. Our products have been known and recognized by mobile telecom operators
we make
All Specifications are subject to change without prior noticewww.shyamtelecom.com All Specifications are subject to change without prior notice
TABL
E O
F C
ON
TEN
TS
1www.shyamtelecom.com
SPLITTER / COMBINERS2 Way Splitter [800 – 2500 MHz]3 Way Splitter [800 – 2500 MHz]4 Way Splitter [800 – 2500 Mhz]
345
MULTICASTING MATRIX2 way Multicasting Matrix2 way Multicasting Matrix [ 1700 – 2200 Mhz ]2 way Multicasting Matrix [ 800 – 2500 Mhz ]4 way Multicasting Matrix [ 800 – 2500 Mhz] 4 way Multicasting Matrix [ 800 – 960 Mhz ]4 way Multicasting Matrix [ 1700 – 2200 Mhz ]
[ 800 – 960 Mhz ] 67891011
DIRECTIONAL COUPLERSLow Loss Power Tappers, 800-2500 MHz, 5 dB CouplingLow Loss Power Tappers, 800-2500 MHz, 7 dB CouplingLow Loss Power Tappers, 800-2500 MHz, 10 dB CouplingLow Loss Power Tappers, 806-2500 MHz, 15 dB Coupling
12131415
DIRECTIONAL COUPLERS[For Optical & Frequency Converter Repeaters]Directional Coupler, 806-960 MHz – 20/30/40/50 dBDirectional Coupler, 1710-1990 MHz – 20/30/40/50 dBDirectional Coupler, 1920-2170 MHz – 20/30/40/50 dB
161718
FILTERSBand Pass Filter 890-960 Mhz ( FULL BAND )Band Pass Filter 2nd Operator GSM 896-915 MHzBand Pass Filter 890-915 Mhz
192021
DIPLEXERSDiplexer / Cross Band Coupler [824-960 & 1710-1990]Diplexer GSM+DCSDiplexer GSM+UMTS
222324
TRIPLEXERSTriplexer GSM+DCS and UMTSTriplexer 824-960,1710-1990,2400-2500 26
25
DUMMY LOADS50 Ohms Terminators, Rating 2 W 50 Ohms Terminators, Rating 10 W50 Ohms Terminators, Rating 25 W 50 Ohms Terminators, Rating 50 W50 Ohms Terminators, Rating 100 W
2930313233
PASSIVE MULTI OPERATOR COMBINERSDual Band Passive Multi Operator Combiner [2+2] [824-960,1710-1990]Dual Band Passive Multi Operator Combiner [4+4] [824-960,1710-1990]
2728
All Specifications are subject to change without prior notice
2 W
AY S
PLIT
TER
3
LOW-LOSS POWER SPLITTER (2 Way Splitter)
Product Descriptionhese Wideband Splitters are available for 2 way power splitting or providing two receiver outputs, terminated with N-Type Connectors. T
These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Specifications
Type No. 1173 0001 102Frequency Range 800 – 2500 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Insertion Loss < 3.5 dB
Termination N - Female
Total Input Power Rating 150 Watts
Dimension (mm) 203.6x50x35 mm/ 9”x2”x2”
Weight (Kgs) 0.230 kg
Size (mm/inch) 215x50x35mm / 9”x2”x2”o oOperating temperature( C/ F)
Operating Humidity 5 – 95%
Applications� Feeder Distribution� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Network
Material Housing : Aluminum
DC capability �DC transmission between all terminations (suitable for remote power supply systems).
Ø Low LossØ Isolated OutputsØ Low Power CombiningØ Wide Bandwidth
2 WAY SPLITTER
www.shyamtelecom.com
o o o o-35 C to 70 C / -31 F to 158 F
TABL
E O
F C
ON
TEN
TS
2 All Specifications are subject to change without prior noticewww.shyamtelecom.com
INDOOR ANTENNASMulti Band Omni Ceiling Antenna [800 – 2500 MHz]Patch Panel Directional Dual Band Antenna [800 – 2500 MHz]
3940
OUTDOOR ANTENNAS
Outdoor Directional Antenna [ 1710 – 2170 Mhz], 9 dBiOutdoor Dual Band Directional Antenna [ 824 – 2170 Mhz], 7/9 dBi
Outdoor Yagi Antenna [1710 –2170], 10 dBiOutdoor Yagi Antenna [806-960], 12 dBiOutdoor Yagi Dual Band [900-1800], 7/9 dBiQuad Band Yagi Antenna [800-2500], 8.5/ 11 dBiOutdoor Repeater Server Antenna [806-960], 16 dBi
Outdoor Directional Antenna [ 824 – 960 Mhz], 7 dBi 414243
4445464748
ANTENNA INSTALLATION 49-50
APPLICATIONS / ENGINEERING NOTESVSWR Conversion Chart 52
GLOSSARY 53
51PART NO. REFERENCE
ATTENUATOR Att nuator [ 3 dB ]Attenuator [ 6 dB ]Attenuator [ 10 dB ]Attenuator [ 20 dB ]Attenuator [ 30 dB ]
e 3435363738
All Specifications are subject to change without prior notice
4 W
AY S
PLIT
TER
3 W
AY S
PLIT
TER
4 All Specifications are subject to change without prior notice 5
LOW-LOSS POWER SPLITTER (4 Way Splitter)
Product Descriptionhese Wideband Splitters are available for 4 way power splitting or providing four receiver outputs, terminated with N-Type Connectors. T
These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Applications� Feeder Distribution� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Network
Material � : AluminumHousing
DC capability �DC transmission between all terminations (suitable for remote power supply systems).
Ø Low LossØ Isolated OutputsØ Low Power CombiningØ Wide Bandwidth
LOW-LOSS POWER SPLITTER (3 Way Splitter)
Product Descriptionhese Wideband Splitters are available for 3 way power splitting or providing three receiver outputs, terminated with N-Type Connectors. T
These splitters allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Applications� Feeder Distribution� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Network
Material � : AluminumHousing
DC capability �DC transmission between all terminations (suitable for remote power supply systems).
Ø Low LossØ Isolated OutputsØ Low Power CombiningØ Wide Bandwidth
Specifications
Type No. 1173 0001 104Frequency Range 800 – 2500 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Insertion Loss < 6.5 dB
Termination N - Female
Total Input Power Rating 150 Watts
Dimension (mm/inch) 203.6x62.3x43.4mm
Weight (Kgs/lbs) 0.27 kgs
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Specifications
Type No. 1173 0001 103Frequency Range 800 – 2500 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Insertion Loss < 5 dB
Termination N - Female
Total Input Power Rating 150 Watts
Dimension (mm/inch) 203.6x62.3x24.8 mm
Weight (Kgs/lbs) 0.250 kgs o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
3 WAY SPLITTER 4 WAY SPLITTER
www.shyamtelecom.comwww.shyamtelecom.com
All Specifications are subject to change without prior notice
2 W
AY M
ULT
ICA
STIN
G M
ATR
IX
7
2 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 2 input ports from a radio base station to 2 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
Tx/Rx
Specifications
Type No. 1164 0001 102Frequency Range 1700 – 2200 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 3.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 102.6x76.2x18.4 mm
Weight (Kgs/lbs) 0.270Kgs / 0.6 lbs Approx
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
2 WAY MULTICASTING MATRIX [1700-2200]
www.shyamtelecom.com
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
(1700 – 2200 Mhz)
IN IN
TRX2 TRX1
TRX1 + TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
TRX1 & TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
2 W
AY M
ULT
ICA
STIN
G M
ATR
IX
6 All Specifications are subject to change without prior notice
2 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 2 Tx input ports from a radio base station to 2 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
/Rx
Specifications
Type No. 1164 0000 102Frequency Range 800 – 960 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 3.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 102.6x76.2x18.4 mm
Weight (Kgs/lbs) 0.270Kgs
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
www.shyamtelecom.com
( 800-960 Mhz )
2 WAY MULTICASTING MATRIX [800-960]
806-960 Mhz
IN IN
TRX2 TRX1
TRX1 + TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
TRX1 & TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
All Specifications are subject to change without prior notice
4 W
AY M
ULT
ICA
STIN
G M
ATR
IX
9
4 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 4 input ports from a radio base station to 4 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
Tx/Rx
Specifications
Type No. 1164 0011 104Frequency Range 800 - 2500 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 6.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 150x60x25 mm / 6”x2”x1”
Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
4 WAY MULTICASTING MATRIX [800-2500]
www.shyamtelecom.com
(800 – 2500 Mhz)
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
800 800 –– 960 MHz960 MHz
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
800 –– 2500 MHz
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
2 W
AY M
ULT
ICA
STIN
G M
ATR
IX
8 All Specifications are subject to change without prior notice
2 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 2 Tx input ports from a radio base station to 2 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
/Rx
Specifications
Type No. 1164 0011 102Frequency Range 800 – 2500 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 3.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 102.6x76.2x18.4 mm
Weight (Kgs/lbs) 0.270Kgs
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
www.shyamtelecom.com
( 800-2500 Mhz )
2 WAY MULTICASTING MATRIX [800-960]
806-960 Mhz
IN IN
TRX2 TRX1
TRX1 + TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
TRX1 & TRX2
2 Way2 Way--2 Way Matrix2 Way Matrix
OUTOUT
–800 960 MHz
All Specifications are subject to change without prior notice
4 W
AY M
ULT
ICA
STIN
G M
ATR
IX
4 W
AY M
ULT
ICA
STIN
G M
ATR
IX
10 All Specifications are subject to change without prior notice 11
4 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 4 input ports from a radio base station to 4 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
Tx/Rx
4 WAY MULTICASTING MATRIX
Product Descriptionhe Unit combines up to 4 input ports from a radio base station to 4 output ports in a single distributed antenna system. T
The advantage of this is that minimum hardware needs to be installed and minimum of loss is retained.
Tx/Rx
Specifications
Type No. 1164 0000 104Frequency Range 800 – 960 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 6.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 150x60x25 mm / 6”x2”x1”
Weight (Kgs/lbs) 0.6 kgs/ 1.5 lbs Approx
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
Specifications
Type No. 1164 0001 104Frequency Range 1700 – 2200 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Coupling 6.2 + 0.5 dB
Termination N - Female
Total Power Rating
Isolation
100 Watts
> 20 dB
Dimension (mm/inch) 150x60x25 mm / 6”x2”x1”
Weight (Kgs/lbs) 0.6Kgs / 1.5 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Multiple Receiver Outputs� Antenna Arrays� Combining Systems
Material � : AluminumHousing
ØLow LossØWide BandwidthØIsolated Outputs ØEasy to Install
4 WAY MULTICASTING MATRIX [800-960] 4 WAY MULTICASTING MATRIX [1700-2200]
www.shyamtelecom.comwww.shyamtelecom.com
(800 – 960 Mhz) (1700 – 2200 Mhz)
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
––
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
800 800 –– 960 MHz960 MHz
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
4 Way x 4 Way Matrix4 Way x 4 Way Matrix
1700 –– 2200 MHz
TRX1TRX1 TRX2TRX2 TRX3TRX3 TRX4TRX4
TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4TRX1+2+3+4 TRX1+2+3+4TRX1+2+3+4
OUTOUT
ININ
LOW
-LO
SS P
OW
ER T
APP
ERS
12 All Specifications are subject to change without prior notice
LOW-LOSS POWER TAPPERS ( Directional Couplers)
Product Descriptionirectional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 5.0 dB.D
These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Applications�Radiating Cable Networks�Combiner Systems�Testing�Distributed Antenna Systems
Material � : Aluminum� Inner conductor : Brass
Housing
DC capability � DC transmission only between input and port O1� O2 is capacitive coupled.
Ø High DirectivityØ Good VSWRØ High PowerØ Broadband
Specifications
Type No. 1173 0001 105Frequency Range 800 – 2 00 5 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Tap Loss 1.5 dB4.8 dB + 0.5 dB
Termination N - Female
Total Input Power Rating 150 Watts
Dimension (mm/inch) 156x58x16.5mm
Weight (Kgs/lbs) 0.210 kgs
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
www.shyamtelecom.com
01 – 0201 – 03
LOW-LOSS POWER TAPPERS (Directional Couplers)
Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 7dB.A
These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Specifications
Type No. 1173 0001 107Frequency Range 800 – 2 00 5 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Tap Loss 01 – 02 0.9 dB
01 – 03 7.0 + 0.5 dB
Termination
Total Input Power Rating
N - Female
150 Watts
Dimension (mm/inch) 156x58x16.5mm
Weight (Kgs/lbs) 0.210Kgs
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Radiating Cable Networks� Combiner Systems� Testing� Distributed Antenna Systems
Material � : Aluminum� Inner conductor : Brass
Housing
ØHigh DirectivityØGood VSWRØHigh PowerØBroadband
DC capability �DC transmission only between input and port O1. �O2 is capacitive coupled. LOW LOSS POWER TAPPER - 7dB
7dB
13
LOW
-LO
SS P
OW
ER T
APP
ERS
LOW LOSS POWER TAPPER - 5dB
5 dB
LOW-LOSS POWER TAPPERS (Directional Couplers)
Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 15dB.A
These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
Specifications
Type No. 1173 0001 115Frequency Range 800 – 2 00 5 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Tap Loss 01 – 02 0.12 dB
01 – 03 15.0 - 0.5 dB
Termination
Total Input Power Rating
N - Female
150 Watts
Dimension (mm/inch) 156x58x16.5mm
Weight (Kgs/lbs) 0.210Kgs
Operating temperature o o( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Radiating Cable Networks� Combiner Systems� Testing� Distributed Antenna Systems
Material � : Aluminum� Inner conductor : Brass
Housing
ØHigh DirectivityØGood VSWRØHigh PowerØBroadband
DC capability DC transmission only between input and port O1. O2 is capacitive coupled. LOW LOSS POWER TAPPER - 15dB
15dB
All Specifications are subject to change without prior notice
LOW
-LO
SS P
OW
ER T
APP
ERS
14 All Specifications are subject to change without prior notice 15
LOW
-LO
SS P
OW
ER T
APP
ERS
www.shyamtelecom.comwww.shyamtelecom.com
Product Description wide range of Directional Couplers are available to couple Power/Frequency at a pre-set coupling level with a coupling range of 10 dB.A
These broadband couplers allow operation across the range from 800 MHz to 2.5 GHz making them Particularly suitable for use in the distribution of multiple mobile operators signal into buildings and tunnels.
LOW-LOSS POWER TAPPERS (Directional Couplers)
Specifications
Type No. 1173 0001 110Frequency Range 800 – 2 00 5 MHz
VSWR 1.3:1 Max
Impedance 50 Ohms
Tap Loss 01 – 02 0.4 dB
01 – 03 10.0+ 0.5 dB
Termination
Total Input Power Rating
N - Female
150 Watts
Dimension (mm/inch) 156x58x16.5 mm
Weight (Kgs/lbs) 0.210Kgs
Operating temperature o o( C/ F)
Operating Humidity 5 – 95%
Applications� Radiating Cable Networks� Combiner Systems� Testing� Distributed Antenna Systems
Material � : Aluminum� Inner conductor : Brass
Housing
ØHigh DirectivityØGood VSWRØHigh PowerØBroadband
DC capability DC transmission only between input and port O1. O2 is capacitive coupled. LOW LOSS POWER TAPPER - 10dB
10dB
o o o o-35 C to 70 C / -31 F to 158 F
All Specifications are subject to change without prior notice16 All Specifications are subject to change without prior notice 17
DIR
ECTI
ON
AL
CO
UPL
ER
www.shyamtelecom.comwww.shyamtelecom.com
Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB.T
These Broad band couplers allow operation across the range from 806 MHz – 960 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal.
DIRECTIONAL COUPLER
Specifications
Type No. 1903 0040 900Frequency Range 80 – 960 6 MHz
VSWR 1.2:1 Max
Impedance 50 Ohms
Insertion Loss < 0.1 dB
Termination [Port1–2] 7/16 (M) – 7/16 (F)
Termination [Coupled]
Power Rating
N - Female
200 Watts
Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5”
Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx
Operating temperature o o( C/ F)
Couplingo o o o-35 C to 70 C / -31 F to 158 F
20/30/40/50 dB
Operating Humidity 5 – 95%
Applications� Coupler for Fiber optic and Frequency Translating Repeater� In building wireless Networks
Material � : AluminumHousing
ØHigh DirectivityØGood VSWRØHigh PowerØBroad Bandwidth
DC capability DC Transmission only between input and outputPort 03 is capacitive coupled
(20/30/40/50 dB)(806 – 960 MHz)
DIRECTIONAL COUPLER(20/30/40/50 dB)
Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range 20 dB to 50 dB.T
These Broad band couplers allow operation across the range from 1710 MHz – 1990 MHz making them particularly suitable for use in the distribution of multiple mobile operators signal.
DIRECTIONAL COUPLER
Specifications
Type No. 1913 0040 900Frequency Range 1710 – 1990 MHz
VSWR 1.2:1 Max
Impedance 50 Ohms
Insertion Loss < 0.1 dB
Termination [Port1–2] 7/16 (M) – 7/16 (F)
Termination [Coupled]
Power Rating
N - Female
200 Watts
Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5”
Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx
Operating temperature o o( C/ F)
Couplingo o o o-35 C to 70 C / -31 F to 158 F
20/30/40/50 dB
Operating Humidity 5 – 95%
Applications� Coupler for Fiber optic and Frequency Translating Repeater� In building wireless Networks
Material � : AluminumHousing
ØHigh DirectivityØGood VSWRØHigh Power rating ØBroad Bandwidth
DC capability DC Transmission only between input and outputPort 03 is capacitive coupled
DIRECTIONAL COUPLER
(20/30/40/50 dB)
(1710 – 1990 Mhz)
(20/30/40/50 dB)
DIR
ECTI
ON
AL
CO
UPL
ER
All Specifications are subject to change without prior notice18 All Specifications are subject to change without prior notice 19
DIR
ECTI
ON
AL
CO
UPL
ER
www.shyamtelecom.comwww.shyamtelecom.com
Product Descriptionhe Unit are available to couple power/frequency at a pre-set coupling level with a coupling range20 dB to 50 dB.T
DIRECTIONAL COUPLER
Specifications
Type No. 1943 0030 900Frequency Range 1920 – 2170 MHz
VSWR 1.2:1 Max
Impedance 50 Ohms
Insertion Loss < 0.1 dB
Termination [Port1–2] 7/16 (M) – 7/16 (F)
Termination [Coupled]
Power Rating
N - Female
200 Watts
Dimension (mm/inch) 90x60x40 mm / 3.5”x2”x1.5”
Weight (Kgs/lbs) 0.4 kgs/ 1 lbs Approx
Operating temperature o o( C/ F)
Couplingo o o o-35 C to 70 C / -31 F to 158 F
20/30/40/50 dB
Operating Humidity 5 – 95%
Applications� Coupler for Fiber optic and Frequency Translating Repeater� In building wireless Networks
Material � : AluminumHousing
ØHigh DirectivityØGood VSWRØHigh Power ratingØBroad Bandwidth
DC capability DC Transmission only between input and outputPort 03 is capacitive coupled
(20/30/40/50 dB)
(1920 – 2170 Mhz)
DIRECTIONAL COUPLER(20/30/40/50 dB)
Product DescriptionThis Band – Pass Filter is designed to be used in the Tx & Rx path of GSM 900 MHz BTS.
It is used : sTo reject the strong CDMA signal from CDMA BTS and to pass only 890 – 960 MHz (GSM) signal. So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal.sTo improve the input selectivity of PGSM 900 BTS receivers sTo increase the isolation between CDMA 800 and PGSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.
Filter characteristics:Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles.
BAND PASS FILTER
SpecificationsType No. 1903 0921 060Pass Band 890 – 960 MHz
Insertion Loss < 3.5 dB
VSWR 1.2:1 Max
Stop Band CDMA BTS Attenuation
889.0 MHz < 30 dB890.0 MHz < 3.5 dB915.0 MHz < 0.6 dB960.0 MHz < 0.4 B
Impedance 50 Ohms
Total Power Rating 200 W
Termination 7/16 DIN Female
Dimension (mm/inch) 228x164x68 mm / 9”x7”x3”
Weight (Kgs/lbs) 3 Kgs / 7 lbs Approxo oOperating temperature( C/ F)
Operating Humidity 5 – 95%
Applications� Site Sharing� Interference Removal� Multi Operator Combining
Material � : Aluminum, Silver PlatedHousing
Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded.
o o o o-35 C to 70 C / -31 F to 158 F
BAND PASS FILTER (890 - 960 Mhz)
(890 - 960 Mhz)
BAN
D P
ASS
FIL
TER
All Specifications are subject to change without prior notice20 All Specifications are subject to change without prior notice 21
BAN
D P
ASS
FIL
TER
www.shyamtelecom.comwww.shyamtelecom.com
BAND PASS FILTER
Product DescriptionThis Band – Pass Filter is designed to be used for 2nd & 3rd Operator of GSM 900 MHz.
It is used : ? To reject the strong CDMA signal from CDMA BTS and to pass only 896 – 915 MHz (GSM Uplink signal). So that the Receivers of BTS is not saturated by the CDMA BTS Down Link signal.? To improve the input selectivity of GSM 900 BTS receivers ? To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.
Filter characteristics:Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles.
SpecificationsType No. 1903 0920 015Pass Band 896 – 915 MHz
Insertion Loss < 1.8 dB
VSWR 1.2:1 Max
Stop Band CDMA BTS Attenuation
890.0 MHz < 60 dB891.0 MHz < 40 dB896.0 MHz < 1.7 dB900.0 MHz < 0.8 dB915.0 MHz < 0.7 dB
Impedance 50 Ohms
Total Power Rating 50 W
Termination N Female
Dimension (mm/inch) 230x70x30 mm / 9”x3”x1”
Weight (Kgs/lbs) 1 Kgs / 2.2 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Site Sharing� Interference Removal� Multi Operator Combining
Material � : Aluminum, Silver PlatedHousing
Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded. BAND PASS FILTER 896-915 Mhz
(896 - 915 Mhz)Product DescriptionThis Band – Pass Filter is designed to be used for GSM 900 MHz.
It is used :?To reject the strong CDMA signal from CDMA BTS and to pass only 890 – 915 MHz (GSM Uplink signal). So that the Diversity Receiver of BTS is not saturated by the CDMA BTS Down Link signal.?To improve the input selectivity of GSM 900 BTS receivers ?To increase the isolation between CDMA 800 and GSM 900 antennas which are mounted closely on the same tower or which use the common antenna for CDMA 800 & GSM 900 MHz BTS co located.
Filter characteristics:Broad pass band range with low insertion loss, high CDMA stop band attenuation, steepened filter curve through additional stop poles.
BAND PASS FILTER
SpecificationsType No. 1903 0920 050 Pass Band 890 – 915 MHz
Insertion Loss < 4.5 dB
VSWR 1.2:1 Max
Stop Band CDMA BTS Attenuation
888.0 MHz < 60 dB889.0 MHz < 30 dB890.0 MHz < 4.5 dB891.0 MHz < 1.8 dB915.0 MHz < 0.4 dB
Impedance 50 Ohms
Total Power Rating 50 W
Termination N Female
Dimension (mm/inch) 320x115x83
Weight (Kgs/lbs) 2 Kgs / 4.4 lbs Approxo oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Operating Humidity 5 – 95%
Applications� Site Sharing� Interference Removal� Multi Operator Combining
Material � : Aluminum, Silver PlatedHousing
Mounting M5 Screws ProvidedAll Metal Parts are DC Grounded.
BAND PASS FILTER 890-915 MHZ
(890-915 Mhz)
BAN
D P
ASS
FIL
TER
All Specifications are subject to change without prior notice www.shyamtelecom.com22 23All Specifications are subject to change without prior notice
Product Descriptionhese Diplexers are compact solution to allow the Co-siting of two different frequency bands on to one common output. Designed using high performance filters, these units provide Texcellent inter band isolation, low insertion loss and good intermodulation performance.
By using this Diplexer, it is possible to reduce the feeder cable requirement by 50% hence reducing rigging and tower rental costs.
DIPLEXER / CROSS BAND COUPLER
Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems
Material � : Aluminium, Clear ChromatedHousing
Mounting � M5 Screws Provided� All Metal Parts are DC Grounded.
DIP
LEXE
R /
CRO
SS B
AN
D C
OU
PLER
SpecificationsType No. 1903 0909 200CDMA / GSM Band 824 – 960 MHz
DCS / PCS Band 1710 – 1990 MHz
Band Isolation > 80 dB
Insertion Loss < 0.5 dBVSWR 1.3:1 Max
Propagation Delay (µs) < 1
Input / Output Port 2 / 1
Total Power Rating 250 WattsImpedance 50 Ohms
Termination N-FemaleDimension (mm/inch) 243x95x92 mm / 10”x4”x4”
Weight (Kgs/lbs) 1.5 Kgs / 3 lbs Approx
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
ØHigh IsolationØLow Insertion Loss ØLow Intermodulation
DIPLEXER
www.shyamtelecom.com
DIP
LEXE
R
Product Descriptionhis GSM / DCS Diplexers are compact solution to allow the co-siting of two different frequency bands on to one common output (Antenna). Designed using high performance TBand Pass filters, this model provide excellent inter band isolation, low insertion loss and
good Inter-modulation performance. By using this Diplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.
DIPLEXER
Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems
Material � : Aluminium, Black, Clear ChromatedHousing
Mounting � M5 Screws Provided� All Metal Parts are DC Grounded.
SpecificationsType No. 1903 0909 000GSM Band 890 – 960 MHz
DCS Band 1710 – 1880 MHz
Band Isolation > 90 dB GSM / DCSInsertion Loss < 0.2 dBVSWR 1.3:1 Max
Propagation Delay (µs) < 1
Input / Output Port 2 / 1
Total Power Rating 150 Watts
Pass Band Ripple (dB) < 0.1
Impedance 50 Ohms
Termination N-FemaleDimension (mm) 155-L x 95-W x 38-H mm
Weight (Kgs) 1.16 Kgs
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
ØHigh IsolationØLow Insertion Loss ØLow Intermodulation
DIPLEXER
Product Descriptionhis GSM / DCS / UMTS Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high Tperformance Band Pass filters, this model provide excellent inter band isolation, low
insertion loss and good Inter-modulation performance.By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.
TRIPLEXER
Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems
Material � : Aluminium, Black, Clear ChromatedHousing
Mounting � M5 Screws Provided� All Metal Parts are DC Grounded.
SpecificationsType No. 1903 9100 000GSM Band 880 – 960 MHz
DCS Band 1710 – 1880 MHz
Band Isolation > 90 dB GSM / DCS> 60 dB UMTS / DCS
Insertion Loss < 0.4 dBVSWR 1.3:1 Max
UMTS Band 1920 – 2170 MHz
Propagation Delay (µs) < 1
Input / Output Port 3 / 1
Total Power Rating 150 Watts
Pass Band Ripple (dB) < 0.1
Impedance 50 Ohms
Termination N-Female/ SMA (Female)Dimension (mm) 233x58x61 mm
Weight (Kgs) 1.16 Kgs
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
ØHigh IsolationØLow Insertion Loss ØLow Intermodulation
TRIPLEXER
25All Specifications are subject to change without prior notice www.shyamtelecom.com24 All Specifications are subject to change without prior notice
DIP
LEXE
R
www.shyamtelecom.com
Product Descriptionhis GSM / UMTS Diplexers are compact solution to allow the co-siting of two different frequency bands on to one common output (Antenna). Designed using high performance TBand Pass filters, this model provide excellent inter band isolation, low insertion loss and
good Inter-modulation performance. By using this Diplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.
DIPLEXER
Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems
Material � : Aluminium, Black, Clear ChromatedHousing
Mounting � M5 Screws Provided� All Metal Parts are DC Grounded.
SpecificationsType No. 1903 0909 000GSM Band 890 – 960 MHz
Band Isolation > 90 dB GSM / UMTSInsertion Loss < 0.2dB
VSWR 1.3:1 Max
UMTS Band 1920 – 2170 MHz
Propagation Delay (µs) < 1
Input / Output Port 2 / 1
Total Power Rating 150 Watts
Pass Band Ripple (dB) < 0.1
Impedance 50 Ohms
Termination N-Female
Dimension (mm) 155-L x 95-W x 38-H mm
Weight (Kgs) 1.16 Kgs
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
ØHigh IsolationØLow Insertion Loss ØLow Intermodulation
DIPLEXER
TRIP
LEXE
R
24 All Specifications are subject to change without prior notice
TRIP
LEXE
R
www.shyamtelecom.com26
TRIPLEXER
Product Descriptionhis CDMA & GSM / DCS & PCS / ISM Triplexers are compact solution to allow the co-siting of three different frequency bands on to one common output (Antenna). Designed using high Tperformance Band Pass filters, this model provide excellent inter band isolation, low
insertion loss and good Inter-modulation performance.By using this Triplexer, it is possible to reduce feeder cable requirement by 66% hence reducing rigging and tower rental costs, where applicable.
Applications� Dual Band Cellular Networks� Common Antenna Sharing� In building Coverage Systems
Material � : Aluminum, Black, Clear ChromatedHousing
Mounting� M5 Screws Provided� All Metal Parts are DC Grounded.
SpecificationsType No. 1903 0990 000CDMA / GSM Band 824 – 960 MHz
DCS / PCS Band 1710 – 1990 MHz
Insertion Loss < 0.4 dB
ISM Band 2400 – 2500 MHz
VSWR 1.3:1 Max
Band Isolation > 90 dB CDMA&GSM / DCS&PCS> 60 dB ISM / DCS&PCS
Pass Band Ripple (dB) < 0.1
Propagation Delay (µs) < 1
Total Power Rating 150 Watts
Impedance 50 Ohms
Input / Output Port 3 / 1
Termination N-Female
Dimension (mm/inch) 227x122x97 mm / 9”x5”x4”
Dimension (mm/inch) 180x70x60mm / 7”x3”x3”
Weight (Kgs/lbs) 2.5 Kgs / 6 lbs Approx
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
ØHigh IsolationØLow Insertion Loss & Good Return LossØLow Intermodulation
TRIPLEXER
All Specifications are subject to change without prior notice 27
PASSIVE MULTI OPERATOR COMBINER[For Site Sharing & Distributed Antenna System]
PASS
IVE
MU
LTI
OPE
RA
TOR C
OM
BIN
ER
Product Descriptionhe Passive Multi Operator Combiner has been designed to allow 2 BTS inputs in 824-960 MHz & 2 BTS inputs in 1710-1990 MHz, while providing 2 combined output ports for Site TSharing and Distributed Antenna System.
The advantage of this is that minimum hardware needs to be installed and a minimum of loss is retained.
SpecificationsType No. 1227 0422 000Frequency Range 824-960 1710-1990
Technology Supported EGSM,GSM, DCS,PCSCell
Combined Output Ports 2
BTS Input Ports 2 2
VSWR 1.3:1 Max
Insertion Loss 4.0 + 0.5 dB
Impedance 50 Ohms
Termination N-FemaleTotal Power Rating 100 Watts
Isolation > 25 dB
Dimension (mm/inch) 350x275x125 mm / 14”x11”x 5”
Weight (Kgs/lbs) 5 kgs / 10 lbs Approx
Operating Humidity 5 – 100%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
www.shyamtelecom.com
(2 + 2)
PASSIVE MULTI OPERATOR COMBINER
BTS 1+2 [824BTS 1+2 [824--960 MHz]960 MHz]
BTS 3+4 [1710BTS 3+4 [1710--1990 MHz]1990 MHz]
Output Port 2Output Port 2
BTSBTS--11
BTSBTS--22
BTSBTS--33
BTSBTS--44
824 824 –– 960 MHz960 MHz
1710 1710 –– 1990 MHz1990 MHz
BTS 1+2 [824BTS 1+2 [824--960 MHz]960 MHz]
BTS 3+4 [1710BTS 3+4 [1710--1990 MHz]1990 MHz]
Output Port 1Output Port 1
++
++
Multiple Multiple -- BTSBTS
CombiningCombining
Unit [2+2]Unit [2+2]
All Specifications are subject to change without prior notice28 All Specifications are subject to change without prior notice 29
Product Descriptionhe Passive Multi Operator Combiner has been designed to allow 4 BTS inputs in 824-960 MHz & 4 BTS inputs in 1710-1990 MHz, while providing 2 combined output ports for Site TSharing and Distributed Antenna System.
The advantage of this is that minimum hardware needs to be installed and a minimum of loss is retained.
PASS
IVE
MU
LTI
OPE
RA
TOR C
OM
BIN
ER
DU
MM
Y L
OA
D
SpecificationsType No. 1227 0844 000Frequency Range 824-960 1710-1990
Technology Supported EGSM,GSM, DCS,PCSCell
Combined Output Ports 2
BTS Input Ports 4 4
VSWR 1.3:1 Max
Insertion Loss 7.0 + 0.5 dB
Impedance 50 Ohms
Termination N-FemaleTotal Power Rating 100 Watts
Isolation > 20 dB
Dimension (mm/inch) 450x 350x150 mm / 18”x14”x6”
Weight (Kgs/lbs) 7 Kgs / 16 lbs Approx
Operating Humidity 5 – 100%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
PASSIVE MULTI OPERATOR COMBINER[For Site Sharing & Distributed Antenna System]
www.shyamtelecom.comwww.shyamtelecom.com
(4 + 4)
PASSIVE MULTI OPERATOR COMBINER
BTS 1+2+3+4 [824BTS 1+2+3+4 [824--960 MHz]960 MHz]
BTS 5+6+7+8 [1710BTS 5+6+7+8 [1710--1990 MHz]1990 MHz]
Output Port 2Output Port 2
824 824 –– 960 MHz960 MHz
1710 1710 –– 1990 MHz1990 MHz
BTSBTS--11
BTSBTS--22
BTSBTS--33
BTSBTS--44
BTSBTS--55
BTSBTS--66
BTSBTS--77
BTSBTS--88
BTS 1+2+3+4 [824BTS 1+2+3+4 [824--960 MHz]960 MHz]
BTS 5+6+7+8 [1710BTS 5+6+7+8 [1710--1990 MHz]1990 MHz]
Output Port 1Output Port 1
++
++
Multiple Multiple -- BTSBTS
CombiningCombining
Unit [4+4]Unit [4+4]
Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations
Material � : Aluminium� Finish : Black
Housing
SpecificationsType No. 1156 0002 000Frequency Range 800 – 2500 MHz
Total Power Rating 2 Watts Termination N – Male
Impedance 50 OhmsVSWR 1.2:1 Max
Dimension (mm/inch) 70 x 30 mm / 3”x1.5”
Weight (Kgs/lbs) 0.2 Kgs / 0.5 lbs Approx
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o-35 C to 70 C / o o-31 F to 158 F
ØBroad BandwidthØGood VSWR ØUp to 10 W Power Rating
DUMMY LOAD 2 W)
Product Descriptionhese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black
finished aluminium for maximum thermal radiation with N-Type Connectors.
DUMMY LOAD (2 W )
3130
DU
MM
Y L
OA
D
www.shyamtelecom.comAll Specifications are subject to change without prior noticeAll Specifications are subject to change without prior noticewww.shyamtelecom.com
DU
MM
Y L
OA
D
hese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black
finished aluminium for maximum thermal radiation with N-Type Connectors.
Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations
Material � : Aluminium� Finish : Black
Housing
SpecificationsType No.Frequency Range
Total Power RatingTermination
ImpedanceVSWR
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
ØBroad BandwidthØGood VSWR ØUp to 10 W Power Rating
DUMMY LOAD 10 W)
1156 0011 000800 – 2500 MHz
10 Watts
N – Male
50 Ohms
1.2:1 Max
70 x 30 mm / 3”x2”
0.3 Kgs / 0.6 lbs Approx
5 – 95%
o o-35 C to 70 C / o o-31 F to 158 F
Product Description
DUMMY LOAD (10 W) DUMMY LOAD
Product Descriptionhese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black
finished aluminium for maximum thermal radiation with N-Type Connectors.
SpecificationsType No.Frequency Range
VSWR
Total Power Rating
Impedance
Termination
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
1156 0025 000800 – 2500 MHz
1.2:1 Max
25 Watts
50 Ohms
N – Male
70 x 101 mm
0.425 Kgs
5 – 95%
o o-35 C to 70 C / o o-31 F to 158 F
Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations
Material � : Aluminium� Finish : Black
Housing
ØBroad BandwidthØGood VSWR ØUp to 50 W Power Rating
(25 W)
DUMMY LOAD (25 W )
33
DU
MM
Y L
OA
D
www.shyamtelecom.comAll Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice
DU
MM
Y L
OA
D
www.shyamtelecom.com32
DUMMY LOAD
Product Descriptionhese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black
finished aluminium for maximum thermal radiation with N-Type Connectors.
SpecificationsType No.Frequency Range
VSWR
Total Power Rating
Impedance
Termination
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations
Material � : Aluminium� Finish : Black
Housing
ØBroad BandwidthØGood VSWR ØUp to 50 W Power Rating
(50 W)
1156 0051 000800 – 2500 MHz
1.2:1 Max
50 Watts
50 Ohms
N – Male
70 x 125 mm / 2.7”x4.9”
0.55 Kgs / 1.1 lbs Approx
5 – 95%
o o-35 C to 70 C / o o-31 F to 158 F
DUMMY LOAD (50 W)
DUMMY LOAD
Product Descriptionhese Dummy Loads or Terminating load resistors has been designed to give an economic solution to the growing need for compact, rugged and simple termination suitable for bench T& field use. The Co-axial loads utilize low noise chip resistor. The heat sinks are made of black
finished aluminium for maximum thermal radiation with N-Type Connectors.
SpecificationsType No.Frequency Range
VSWR
Total Power Rating
Impedance
Termination
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Applications� Transmitter/Combiner Output Termination� Co-axial Line Terminations� Circular Port Terminations
Material � : Aluminium� Finish : Black
Housing
ØBroad BandwidthØGood VSWR ØUp to 50 W Power Rating
(100 W)
1156 0100 000800 – 2500 MHz
1.2:1 Max
50 Watts
50 Ohms
N – Male
70 x 125 mm / 2.7”x4.9”
0.55 Kgs / 1.1 lbs Approx
5 – 95%
o o-35 C to 70 C / o o-31 F to 158 F
DUMMY LOAD (100 W)
34 All Specifications are subject to change without prior notice
ATT
ENU
ATO
R
www.shyamtelecom.com All Specifications are subject to change without prior notice 35
ATT
ENU
ATO
R
www.shyamtelecom.com
Product Description
Applications�Equipment Protection�Transmitter/combiner power level adjustment
These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation.The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.
Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating
Specifications
Type No.
ATTENUATOR (100 W)
(100 W)
Frequency Range
Attenuation
VSWR
Impedance
Termination
Total Power Rating
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Material � : Aluminium� Finish : Black
Housing
1157 0003 000
DC 2500 MHz
3 dB
1.2:1 Max
50 Ohms
N(M) – N(F)
100 Watts
70 x 160 mm / 2.7”x 6”
0.75 Kgs / 1.3 lbs Approx
5 – 95%
o o o o-35 C to 70 C / -31 F to 158 F
ATTENUATOR (3 dB) ATTENUATOR
Product Description
Applications�Equipment Protection�Transmitter/combiner power level adjustment
These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation.The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.
Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating
Specifications
Type No.
ATTENUATOR (100 W)
(100 W)
Frequency Range
Attenuation
VSWR
Impedance
Termination
Total Power Rating
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Material � : Aluminium� Finish : Black
Housing
1157 0006 000
DC 2500 MHz
6 dB
1.2:1 Max
50 Ohms
N(M) – N(F)
100 Watts
70 x 160 mm / 2.7”x 6”
0.75 Kgs / 1.3 lbs Approx
5 – 95%
o o o o-35 C to 70 C / -31 F to 158 F
(6 dB)
All Specifications are subject to change without prior notice 37
ATT
ENU
ATO
R
www.shyamtelecom.com36 All Specifications are subject to change without prior notice
ATT
ENU
ATO
R
www.shyamtelecom.com
ATTENUATOR
Product Description
Applications�Equipment Protection�Transmitter/combiner power level adjustment
These Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators use chip resistors for attenuation.The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.
Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating
Specifications
Type No.
(100 W)
Frequency Range
Attenuation
VSWR
Impedance
Termination
Total Power Rating
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
1157 0010 000
DC 2500 MHz
10 dB
1.2:1 Max
50 Ohms
N(M) – N(F)
100 Watts
70 x 160 mm / 2.7”x 6”
0.75 Kgs / 1.3 lbs Approx
5 – 95%
o o o o-35 C to 70 C / -31 F to 158 F
Material � : Aluminium� Finish : Black
Housing
(10 dB)
ATTENUATOR (100 W)
ATTENUATOR
Product Description
Applications�Equipment Protection�Transmitter/combiner power level adjustment
hese Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators Tuse chip resistors for attenuation.
The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.
Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating
Specifications
Type No.
(100 W)
Frequency Range
Attenuation
VSWR
Impedance
Termination
Total Power Rating
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Material � : Aluminium� Finish : Black
Housing
1157 0020 000
DC 2500 MHz
20 dB
1.2:1 Max
50 Ohms
N(M) – N(F)
100 Watts
70 x 160 mm / 2.7”x 6”
0.75 Kgs / 1.3 lbs Approx
5 – 95%
o o o o-35 C to 70 C / -31 F to 158 F
(20 dB)
ATTENUATOR (100 W)
All Specifications are subject to change without prior notice 39www.shyamtelecom.com30 All Specifications are subject to change without prior noticewww.shyamtelecom.com
ATT
ENU
ATO
R
38
ATTENUATOR
Product Description
Applications�Equipment Protection�Transmitter/combiner power level adjustment
hese Attenuators has been designed to give an economic solution to the growing need for compact, rugged and simple attenuation suitable for bench & field use. These attenuators Tuse chip resistors for attenuation.
The heat sinks are made of black finished aluminium for maximum thermal radiation with N-Typeconnectors.
Ø Broad BandwidthØ Good VSWRØ Up to 100 W Power Rating
Specifications
Type No.
(100 W)
Frequency Range
Attenuation
VSWR
Impedance
Termination
Total Power Rating
Dimension (mm/inch)
Weight (Kgs/lbs)
Operating Humidity
o oOperating temperature( C/ F)
Material � : Aluminium� Finish : Black
Housing
1157 0030 000
DC 2500 Mhz
30 dB
1.2:1 Max
50 Ohms
N(M) – N(F)
100 Watts
70 x 160 mm / 2.7”x 6”
0.75 Kgs / 1.3 lbs Approx
5 – 95%
o o o o-35 C to 70 C / -31 F to 158 F
(30 dB)
ATTENUATOR (100 W)
Material � Radiator : Low Loss Circuit Board� Base : Aluminium� Radome : ABS� Colour : White
Multi Band Omni Ceiling Antenna [ Cable ]
Mounting� Three holes in the base plate, enable mounting on the ceiling (Three screws are supplied).� For N- Connector 35mm dia hole in the ceiling is required.
SpecificationsType No. 1171 2000 000Frequency Range 800 – 960 / 1710 – 2500
2 dBi / 4 dBiGain
1710 – 2500 / 4 dBi
VSWR 806 – 2500 MHz : < 1.4Impedance 50 Ohms
Power Rating 100 Watts
Polarization Vertical
Termination 9 inch Cable (N-Female)
Horizontal Beamwidth o360
Vertical Beamwidth o90
Weight (Kgs / lbs) 0.210 Kgs
Dimension H x D (mm/inch) 166x146.2 mm / 4”x8”
ØWide Bandwidth OperationØOmni Directional Radiation Pattern ØEasy to Install
Ceiling mounted omni antennas for CDMA 800, GSM 900, DCS, PCS, UMTS and WiFi bands are now available especially for micro-cell and In-building applications. This antenna can be operated in all frequency ranges simultaneously & needs no additional ground plane.
MULTI BAND OMNI CEILING ANTENNA [Cable Type]
Product Description
MULTI BAND OMNI CEILING ANTENNA
Elevation Pattern
120
90
60
Phi = 90
30
00 10-10-20
[dBi]
30
Phi = 270
60
90
120
150
150
180
(800 – 2500 MHz)
For Installation Please Refer Page 49 - 50
Operating Humidity
Operating o otemperature( C/ F)
5 – 95%
o o-35 C to 70 C / o o-31 F to 158 F
MU
LTI
BAN
D O
MN
I C
EILI
NG
AN
TEN
NA
All Specifications are subject to change without prior notice 41www.shyamtelecom.comAll Specifications are subject to change without prior noticewww.shyamtelecom.com
PATC
H P
AN
EL D
IREC
TIO
NA
L A
NTE
NN
A
40
PATCH PANEL DIRECTIONAL ANTENNA
Material � Radiator : Aluminium� Radome : ABS� Colour : White
Mounting� Mounting Plate : Stainless Steel� Two holes of 6mm diameter in the mounting plate.
ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to InstallØAdditional Painting is Possible
Product DescriptionIndoor Directional Antenna
Specifications
Type No. 1171 0400 000Frequency Range (MHz) 800 – 960 & 1710 – 2500
8 dBi MaxGainVSWR 1.3 : 1 MaxImpedance 50 Ohms
Power Rating 100 Watts
Polarization Vertical
Termination N-Female 9 inch Cable
Horizontal Beamwidth o90Vertical Beamwidth o65
Weight (Kgs / lbs) 0.6 kgs / 1.5 lbs Approx
Packing Size (mm/inch) 310x180x65mm / 12”x7”x2”
Dimension (mm / inch) 220x160x50mm / 9”x6”x2”
for CDMA 800, GSM 900 and GSM 1800 / PCS / UMTS for micro-cell and in-building applications. This antenna can be operated in all frequency ranges simultaneously and needs no additional ground plane.
iDEN,
INDOOR DIRECTIONAL ANTENNA
(800 - 2500 MHz)
Azimuthal Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Elevation Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
OUTDOOR DIRECTIONAL ANTENNA
Product Description
Material � Radiator : Brass� Radome : ASA� Colour : Off White
irectional Antenna for GSM, CDMA bands are now available to use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the frequency range Dsimultaneously and needs no additional ground plane.
Mounting� Adjustable Wall Mounting & Tilting Kit� Material : ASA
Specifications
Type No. 1171 0500 900Frequency Range 824 – 960 MHz
7 dBi MaxGainVSWRImpedance 50 Ohms
Power Rating 50 Watts
Polarization Vertical
Termination SMA(F)
Horizontal Beamwidth o80Vertical Beamwidth o70
Weight (Kgs / lbs) 0.5 Kgs / 1 lbs Approx
Dimension (mm / inch) 176x142x41mm / 7”x5”x2”
ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to Install
OUTDOOR DIRECTIONAL ANTENNA
(824 - 960 MHz)
Front to Back Ratio Min 15 dB
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Elevation Pattern
Azimuthal Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
For Installation Please Refer Page 49 - 50
1.8
OU
TDO
OR D
IREC
TIO
NA
L A
NTE
NN
A
42 All Specifications are subject to change without prior noticewww.shyamtelecom.com All Specifications are subject to change without prior notice
OU
TDO
OR D
IREC
TIO
NA
L A
NTE
NN
A
www.shyamtelecom.com 43
OUTDOOR DIRECTIONAL ANTENNA
Product Description
Material � Radiator : Brass� Radome : ASA� Colour : Off White
irectional Antenna Outdoor and Indoor Antenna. This antenna can be operated through the frequency range Dsimultaneously and needs no additional ground plane.
for PCS, DCS & UMTS bands are now available to use as Repeater
Mounting� Adjustable Wall Mounting & Tilting Kit� Material : ASA
Specifications
Type No. 1171 0200 900Frequency Range 1710 – 2170 MHz
9 dBi MaxGainVSWR 1.5 : 1 MaxImpedance 50 Ohms
Power Rating 50 Watts
Polarization Vertical
Termination SMA(F)
Horizontal Beamwidth o65Vertical Beamwidth o60
Dimension (mm/inch) 104x139x29 mm / 4”x6”x1”
Weight (Kgs/lbs) 0.2 kgs / 0.5 lbs Approx
Front to Back Ratio Min 15 dB
ØWide Bandwidth OperationØDirectional Radiation Pattern ØEasy to Install
OUTDOOR DIRECTIONAL ANTENNA
( )1710 – 2170 MHz
Elevation Pattern
Azimuthal Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
For Installation Please Refer Page 49 - 50
OUTDOOR DUAL BAND DIRECTIONAL ANTENNA
Product Description
Material � Radiator : Low Loss Circuit Board� Radome : ASA� Colour : Off White
irectional Antenna use as Repeater Outdoor and Indoor Antenna. This antenna can be operated through the Dfrequency range simultaneously and needs no additional ground plane.
for GSM/CDMA bands & PCS, DCS, UMTS bands are now available to
Mounting�Adjustable Wall Mounting & Tilting Kit� Material : ASA
Specifications
Type No. 1171 2004 000Frequency Range 824 – 960 & 1710 – 2170 MHz
824 – 960 / 7 dBi Max.
1710 – 2170 / 9dBi Max
1710 – 2170 / 1.5:1 Max
Gain
VSWR 824 – 960 / 1.8:1 Max
Impedance 50 Ohms
Power Rating 50 Watts
Polarization Vertical
Termination SMA(F)
Horizontal Beamwidth o80Vertical Beamwidth o70
Weight (Kgs / lbs) 0.5 Kgs / 1 lbs Approx
Dimension (mm / inch) 176x142x41mm / 7”x5”x2”
ØDual Band OperationØDirectional Radiation Pattern ØEasy to Install
DUAL BAND DIRECTIONAL ANTENNA
( )824 – 960 & 1710 – 2170 MHz
Operating Humidity 5 – 95%
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
Elevation Pattern
Azimuthal Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
Elevation Pattern
Azimuthal Pattern
0
-6
-12
-18
-24
-30
-36
330
300
270
240
210
180
150
120
60
30
90
900 MHz 1800 MHz
For Installation Please Refer Page 49 - 50
DU
AL
BAN
D D
IREC
TIO
NA
L A
NTE
NN
A
All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com44 45
Product Description
Material � Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel
utdoor Yagi Antenna applications to use as Outdoor Donor Antenna.O for DCS / PCS in 1710 - 2200 are now available for in-building
Mounting�Fixtures for 20-40mm diameter pipe is provided.
Specifications
Type No. 1171 0003 000Frequency Range 1710 – 2170 MHz
10 dBi Max.GainVSWR 1.5 : 1 Max
Impedance 50 Ohms
Power Rating 100 Watts
Polarization Vertical
Termination 0.6 Mtr Cable with N(F) Connector
Dimension (mm/inch) 700x105x20mm / 27”x4”x1”
Weight (Kgs/lbs) 0.5 Kgs / 1 lbs Approx
ØNarrow BeamwidthØMinimum VSWR PerformanceØEasy to Install ØOutdoor Donor Applications
OUTDOOR YAGI ANTENNA
Horizontal Beamwidth o45
Vertical Beamwidth o40
Operating Humidity 5 – 95%
Wind Survival Rating 200 Km/H
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
OUTDOOR YAGI ANTENNA
(1800/10)
Elevation Pattern
Azimuthal Pattern
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
(1710 – 2170 MHz)
For Installation Please Refer Page 49 - 50
OU
TDO
OR Y
AG
I A
NTE
NN
A
OUTDOOR YAGI ANTENNA (900/12)
Product Description
Material � Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel
utdoor Yagi Antenna applications to use as Outdoor Donor Antenna.O for CDMA / GSM in 806 - 960 are now available for in-building
Mounting�Fixtures for 20-40mm diameter pipe is provided.
ØNarrow BeamwidthØMinimum VSWR PerformanceØEasy to Install ØOutdoor Donor Applications
Specifications
Type No. 1171 0002 090
Frequency Range 806 – 960 MHz
12 dBi Max.Gain
VSWR 1.5 : 1 Max
Impedance 50 Ohms
Total Power Rating 100 Watts
Polarization Vertical
Termination 0.6 Mtr Cable with N(F) Connector
Horizontal Beamwidth o45
Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1”
Vertical Beamwidth o40
Weight (Kgs/lbs) 1 kgs / 2 lbs Approx
Operating Humidity 5 – 95%
Wind Survival Rating 200 Km/H
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
OUTDOOR YAGI ANTENNA
Elevation Pattern
Azimuthal Pattern
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
(806 – 960 MHz)
OU
TDO
OR Y
AG
I A
NTE
NN
A
All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com
QU
AD
BA
ND
YA
GI
AN
TEN
NA
OU
TDO
OR Y
AG
I A
NTE
NN
A
46 47
For Installation Please Refer Page 49 - 50
Product Descriptionutdoor Dual Band Yagi Antenna building applications to use as Outdoor Donor Antenna.O for GSM 900 & DCS 1800 are now available for in-
Mounting� Fixtures for 20-40mm diameter pipe is provided.
ØNarrow BeamwidthØMinimum VSWR PerformanceØEasy to Install ØOutdoor Donor Applications
Material � Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel
OUTDOOR YAGI ANTENNA [DUAL BAND]
Specifications
Type No. 1171 2003 000
Frequency Range 890 – 960 / 1710 – 1880 MHz
890 – 960 / 7 dBi Max.Gain1710 – 1880 / 9dBi Max.
VSWR 2.0 : 1 Max
Impedance 50 Ohms
Total Power Rating 100 Watts
Polarization Vertical
Termination 0.6 Mtr Cable with N(F) Connector
Horizontal Beamwidth o45
Dimension (mm/inch) 1050x210x20 mm/ 41”x8”x1”
Vertical Beamwidth o40
Weight (Kgs/lbs) 1 kgs / 2 lbs Approx
Operating Humidity 5 – 100%
Wind Survival Rating 200 Km/H
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
OUTDOOR YAGI ANTENNA DUAL BAND
Elevation Pattern
Azimuthal Pattern
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
0
20
40
60
80
100
120
140
160
180
200
220
240
260
280
300
320
340 0
-10
-20
-30
-40
(900 & 1800 MHz)
Product Descriptionutdoor Quad Band Yagi Antenna available for in-building applications to use as Outdoor Donor Antenna.O for IDEN/ GSM/ DCS /PCS/ UMTS & Wifi band is now
Mounting� Fixtures for 20-40mm diameter pipe is provided.
ØNarrow BeamwidthØMinimum VSWR PerformanceØEasy to Install ØOutdoor Donor Applications
Material � Radiating Element : Aluminium� Aluminium : Mech. Hardware� Colour : Off White� Mounting Clamp : Stainless steel
QUAD BAND YAGI ANTENNA
Specifications
Type No. 1171 2009 000
Frequency Range 800 – 2500 MHz
8.5 dBi / 11dBi Max.Gain
VSWR <1.5
Impedance 50 Ohms
Total Power Rating 100 Watts
Polarization Vertical
Termination N(Female)
Horizontal Beamwidth o55
Dimension (mm/inch) 480 x 330 x 90mm
Vertical Beamwidth o45
Weight (Kgs/lbs) 1.55 kgs
Operating Humidity 5 – 95%
Wind Survival Rating 150 Km/H
oOperating temperature( C ) o o-35 C to 70 C
QUAD BAND YAGI ANTENNA
(800 & 2500 MHz)
All Specifications are subject to change without prior notice www.shyamtelecom.comAll Specifications are subject to change without prior noticewww.shyamtelecom.com48 49
OUTDOOR REPEATER SERVER ANTENNA
Product Description
Material s s Radome : ASA UV Resistants Colour : Light Grey
Radiator : Aluminium
utdoor Directional Antennas consistent & repeatable RF performance. O
These antennas can be used as Outdoor Repeater server antennas for Cellular Networks.
feature advanced array design techniques; assuring
Mountings Mechanically Tiltable, Aluminium
ØHigh Front to Back RatioØMinimum VSWR PerformanceØExcellent Upper Side Lobe SuppressionØOutdoor Repeater Server ApplicationsØAll Metals Parts are DC Grounded
Specifications
Type No. 1171 1000 000
Frequency Range 806 – 960 MHz
16 dBi Max.Gain
VSWR 1.5 : 1 Max
Impedance 50 Ohms
Total Power Rating 500 Watts
Polarization Vertical
Termination N Connector(F)
Horizontal Beamwidth o65
Dimension (mm/inch) 1219x254x216mm / 48”x10”x9”
Vertical Beamwidth o15
Front to Back Ratio 40 dB
Weight (Kgs/lbs) 5.5 kgs / 12 lbs Approx
Operating Humidity 5 – 100%
Wind Survival Rating 200 Km/H
o oOperating temperature( C/ F) o o o o-35 C to 70 C / -31 F to 158 F
OUTDOOR REPEATER SERVER ANTENNA
Elevation Pattern
Azimuthal Pattern
0
-8
-16
-24
-32
-40
0
330
300
270
240
210
180
150
120
60
30
90
0
-8
-16
-24
-32
-40
0
330
300
270
240
210
180
150
120
60
30
90
(806 – 960 Mhz)
For Installation Please Refer Page 49 - 50
OU
TDO
OR R
EPEA
TER S
ERV
ER A
NTE
NN
A
Yagi Antenna
U - Bolt
Repeater Server Antenna
Mechanical Down tilt Kit
Nut
Yagi Antenna
Bolt Nut
Repeater Server Antenna
Bolt
Patch Panel Antenna
Elevation Tilting KitPole Mounting Kit
Installation-Pole Mountable Antennas
Installation-Pole Mountable Antennas
Installation-Pole / Wall Mountable Antennas Multi Band Omni Ceiling Antenna
AN
TEN
NA
IN
STA
LLA
TIO
N
All Specifications are subject to change without prior noticeAll Specifications are subject to change without prior notice www.shyamtelecom.comwww.shyamtelecom.com 5150
AN
TEN
NA
IN
STA
LLA
TIO
N
AN
TEN
NA
IN
STA
LLA
TIO
N
Mounting & Tilting Kit
Directional Patch Antenna 900
Plastic plug
Self thread screws
Directional Patch Antenna 900
Mounting & Tilting Kit
Plastic plug
Self thread screws
Directional Patch Antenna 1800
Directional Patch Antenna 1800
Installation-Wall Mountable Antennas
Installation-Wall Mountable Antennas
PART NO REFERENCE
DIPLEXERSDiplexer [824-960 & 1710-1990]Diplexer [890-960 MHZ,1710 - 1880]Diplexer [880-960 MHZ,1920- 2170 Mhz ]
1903 0909 2001903 0909 0001903 0909 000
TRIPLEXERSTriplexer824-960,1710-1990,2400-2500Triplexer 880-960 MHZ,1710 - 1880 or1920 - 2170 Mhz ]
1903 0990 000
1903 9100 000
SPLITTER / COMBINERS2 Way Splitter [800 – 2500 Mhz] 1173 0001 102
3 Way Splitter [ – 2500 Mhz]800 1173 0001 103
4 Way Splitter [ – 2500 Mhz]800 1173 0001 104
COMBINERSCombiner 2 + 2 1227 0422 000
Combiner 4 + 4 1227 0844 000
MULTICASTING MATRIX2 way multicasting matrix 900 1164 0000 102
4 way multicasting matrix (800 - 2500) 1164 0011 104
2 way multicasting matrix 1800 1164 0001 102
2 way multicasting matrix (800 - 2500) 1164 0011 102
4 way multicasting matrix 900 1164 0000 104
4 way multicasting matrix 1800 1164 0001 104
DIRECTIONAL COUPLERS
Low Loss Power Tappers, 800-2500 MHz, 7 dB Coupling
1173 000 1071
Low Loss Power Tappers, 800-2500 MHz, 5 dB Coupling
1173 0001 105
Low Loss Power Tappers, 800-2500 MHz, 10 dB Coupling
1173 0001 110
Low Loss Power Tappers, 800-2500 MHz, 15 dB Coupling
1173 0001 115
FILTERSBand Pass Filter 890-960 Mhz 1903 0921 060
Band Pass Filter 2nd Operator GSM 896-915 Mhz
1903 0920 015
Band Pass Filter 890-915 Mhz 1903 0920 050
DIRECTIONAL COUPLERS[For Optical & Frequency Converter Repeaters]
Directional Coupler, 800-2500 MHz – 20/30/40/50 dB
1903 0040 900
Directional Coupler, 1710-1990MHz – 20/30/40/50 dB
1913 0040 900
Directional Coupler, 1920-2170MHz – 20/30/40/50 dB
1943 0030 900
INDOOR ANTENNAS
Multi Band Omni Ceiling [806-2.5G] Cable
1171 2000 000
Patch Panel directional Dual Band Antenna (800 - 2500 MHz)
1171 0400 000
OUTDOOR ANTENNASOutdoor Directional Antenna 900, 7dBi 1171 0500 900
Outdoor Antenna 1800, 9 dBiDirectional 1171 0200 900
Outdoor DB Antenna Directional 1171 2004 000
Outdoor Yagi Antenna Dual Band 1171 2003 000
Outdoor Yagi Antenna 900 1171 0002 090
Outdoor Repeater Server Antenna, 16dBi 1171 1000 000
Quad Band Yagi Antenna 8.5/ 11 dBi 1171 2009 000
Outdoor Yagi Antenna 1800 1171 0003 000
DUMMY LOADSDummy Load 2 W 1156 0002 000
Dummy Load 10 W 1156 0011 000
Dummy Load 25 W 1156 0025 000
Dummy Load 50 W
Dummy Load 100 W
1156 0051 000
1156 0100 000
ATTENUATORAttenuator 3 dB 1157 0003 000Attenuator 6 dB 1157 0006 000Attenuator 10 dB 1157 0010 000Attenuator 20 dB 1157 0020 000Attenuator 30 dB 1157 0030 000
PART
NO
REF
EREN
CE
52 www.shyamtelecom.com All Specifications are subject to change without prior notice All Specifications are subject to change without prior notice 53www.shyamtelecom.com
VSWR CONVERSION CHARTVSWR VSWRReturn
LossReturnLoss
ReflectionCoefficient
ReflectionCoefficient
TransmittedPower Ratio
TransmittedPower Ratio
1.00 1.011.021.031.041.051.061.071.081.091.101.111.121.131.141.151.161.171.181.191.201.211.221.231.241.251.261.271.281.291.301.311.321.331.341.351.361.371.381.391.401.411.421.431.441.451.461.471.481.491.50
1.55 1.601.651.701.751.801.851.901.952.002.052.102.152.202.252.302.352.402.452.502.552.602.652.702.752.802.852.902.953.003.053.103.153.203.253.303.353.403.453.503.553.603.653.703.753.803.853.903.954.004.05
0046.0640.0936.6134.1532.2630.7129.4228.3027.3226.4425.6624.9424.2923.6923.1322.6122.1221.6621.2320.8320.4420.0819.7319.4019.0818.7818.4918.2217.9517.6917.4517.2116.9816.7516.5416.3316.1315.9415.7515.5615.3815.2115.0414.8814.7214.5614.4114.2614.1213.98
13.3212.7412.2111.7311.2910.8810.5110.169.849.549.269.008.758.528.308.097.897.717.537.367.207.046.906.766.626.496.376.256.136.025.915.815.715.625.525.435.355.265.185.115.034.964.884.814.754.684.624.564.504.444.38
0.00000.00500.00990.01480.01960.02440.02910.03380.03850.04310.04760.05210.05660.06100.06540.06980.07410.07830.08260.08680.09090.09500.09910.10310.10710.11110.11500.11890.12280.12660.13040.13420.13790.14160.14530.14890.15250.15610.15970.16320.16670.17010.17360.17700.18030.18370.18700.19030.19350.19680.2000
0.21570.23080.24530.25930.27270.28570.29820.31030.32200.33330.34430.35480.36510.37500.38460.39390.40300.41180.42030.42860.43660.44440.45210.45950.46670.47370.48050.48720.49370.50000.50620.51220.51810.52380.52940.53490.54020.54550.55060.55560.56040.56520.56990.57450.57890.58330.58760.59180.59600.60000.6040
1.000000.999980.999900.999780.999620.999410.999150.998860.998520.998150.997730.997280.996800.996280.995720.995130.994510.993860.993180.992470.991740.990970.990180.989360.988520.987650.986760.985850.984920.983960.982990.981990.980980.979940.978890.977820.976730.975630.974510.973370.972220.971060.969880.968690.967480.966260.965030.963790.962540.961270.96000
0.953480.946750.939840.932780.925620.918370.911050.903690.896290.888890.881480.874090.866720.859380.852070.844810.837600.830450.823380.816330.809360.802470.795650.788900.782220.775620.769100.762660.756290.750000.743790.737660.731600.725620.719720.713900.708150.702480.696880.691360.685910.680530.675220.669990.664820.659720.654690.649730.644830.640000.63523
GLO
SSA
RY
VSW
R C
ON
VER
SIO
N C
HA
RT
GLOSSARYAntennaA passive component which converts wired electrical energy to wireless radio waves and directs them through the air in some pattern.
EIRPEffective Isotropic Radiated Power
FBRFront to back Ratio, The difference (in dB) between power radiated in the boresight of the antenna to that radiated 180 degree behind boresight.
GainIn a given direction, the ratio of radiation intensity in that direction to the net power accepted by the antenna from the connected transmitter.
GSMGlobal System for Mobile Communications; the digital transmission technique widely adopted in Europe and supported in North America for PCS, GSM uses 900 MHz and 1800 MHz in Europe. In North America, GSM uses the 1900 Mhz.
ImpedanceA unit of measure , expressed in Ohms, of the total opposition (resistance, capacitance and inductance) offered to the flow of an alternating current.
IsotropicA hypothetical antenna having equal radiation intensity in all direction.
PolarizationIn a given direction, the polarization of a plane wave incident from the given direction which results in maximum available power at the antenna terminals.
SARSpecific Absorption Rate: the amount of radiation absorbed by the human body (SAR for the entire body) or by the head (local SAR).
VSWRVoltage Standing Wave Ratio, A comparison of power accepted to the power reflected back from the system, generally with respect to a 50 Ohms line impedance. A VSWR of 1.0 is 100% of power accepted by the antenna, a VSWR of 1.5 is 97%, a VSWR of 2.o is 89%.
WavelengthThe ratio of the velocity of the wave to the frequency of the current causing the wave.
WiFiShort for wireless fidelity and is meant to be used generically hen referring of any type of 802.11b, 802.11a, dual band, etc. The term is promulgated by the WiFi Alliance.
Antenna Array An antenna comprising a number of radiating elements, which are arranged and excited to obtain directional radiation pattern.
Axial Ratio A measure of circularity of polarization, related to a Cross polar antenna’s XPD.
Bandwidth The range of frequencies within which the performance of the antenna, with respect to some characteristic, conforms to a specified standard.
Beamwidth The acceptance angle of an antenna, usually measured between half power(3dB) points.
BPF Band Pass Filter
CDMA Code Division Multiple Access, is one of several digital wireless transmission methods in which signals are encoded using a pseudo random sequence that corresponds to a different communication channel.
DBi A ratio of decibels to an isotropic antenna that is commonly used to measure antenna gain.
DBmdB Power relative to one milliwatt
DipoleA type of low gain antenna consisting of two elements
Directional Antenna An antenna having the property of radiating or receiving electromagnetic waves more effectively in some directions than others.
DB Decibels; A means of expressing voltage, power, gain, loss or frequency in logarithmic form against a reference, Typical reference includes volts, watts or Hz.
dB = 10 log (x/y)
Recommended