View
212
Download
0
Category
Preview:
Citation preview
A STUDY ON MATERIAL MANAGEMENT AT AN
AEROSPACE PRODUCTION
MOHAMAD NAUBFAL BIN AHAMAD
B051010158
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
2014
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
BORANG PENGESAHAN STATUS LAPORAN PROJEK SARJANA MUDA
TAJUK: A Study on Material Management at an Aerospace Production
SESI PENGAJIAN: 2013/14 Semester 2 Saya MOHAMAD NAUBFAL BIN AHAMAD mengaku membenarkan Laporan PSM ini disimpan di Perpustakaan Universiti Teknikal Malaysia Melaka (UTeM) dengan syarat-syarat kegunaan seperti berikut:
1. Laporan PSM adalah hak milik Universiti Teknikal Malaysia Melaka dan penulis. 2. Perpustakaan Universiti Teknikal Malaysia Melaka dibenarkan membuat salinan
untuk tujuan pengajian sahaja dengan izin penulis. 3. Perpustakaan dibenarkan membuat salinan laporan PSM ini sebagai bahan
pertukaran antara institusi pengajian tinggi.
4. **Sila tandakan ( )
SULIT
TERHAD
TIDAK TERHAD
(Mengandungi maklumat yang berdarjah keselamatan atau kepentingan Malaysia sebagaimana yang termaktub dalam AKTA RAHSIA RASMI 1972)
(Mengandungi maklumat TERHAD yang telah ditentukan oleh organisasi/badan di mana penyelidikan dijalankan)
Alamat Tetap:
Blok 60-14-07, Taman Sri Perak,
Jalan Slim, 11600 Georgetown,
Pulau Pinang.
Tarikh: ________________________
Disahkan oleh:
Cop Rasmi: Tarikh: _______________________
** Jika Laporan PSM ini SULIT atau TERHAD, sila lampirkan surat daripada pihak berkuasa/organisasi berkenaan dengan menyatakan sekali sebab dan tempoh laporan PSM ini perlu dikelaskan sebagai SULIT atau TERHAD.
FAKULTI KEJURUTERAAN PEMBUATAN
Tel : +606 331 6019 | Faks : +606 331 6431/6411
Rujukan Kami (Our Ref) : Rujukan Tuan (Your Ref) :
23 Jun 2014
Pustakawan Perpustakaan UTeM Universiti Teknikal Malaysia Melaka Hang Tuah Jaya, 76100 Durian Tunggal, Melaka. Tuan/Puan, PENGKELASAN LAPORAN PSM SEBAGAI SULIT/TERHAD LAPORAN PROJEK SARJANA MUDA KEJURUTERAAN PEMBUATAN (MANUFACTURING MANAGEMENT): MOHAMAD NAUBFAL BIN AHAMAD Sukacita dimaklumkan bahawa Laporan PSM yang tersebut di atas bertajuk “A Study on Material Management at an Aerospace Production” mohon dikelaskan sebagai *SULIT / TERHAD untuk tempoh LIMA (5) tahun dari tarikh surat ini. 2. Hal ini adalah kerana IANYA MERUPAKAN PROJEK YANG DITAJA OLEH SYARIKAT LUAR DAN HASIL KAJIANNYA ADALAH SULIT. Sekian dimaklumkan. Terima kasih. Yang benar, ________________ Dr. Zuhriah binti Ebrahim Pensyarah Fakulti Kejuruteraan Pembuatan 06-3316760 * Potong yang tidak berkenaan
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
A STUDY ON MATERIAL MANAGEMENT AT AN
AEROSPACE PRODUCTION
This report submitted in accordance with requirement of the Universiti Teknikal
Malaysia Melaka (UTeM) for the Bachelor Degree of Manufacturing Engineering
(Manufacturing Management) with Honours.
by
MOHAMAD NAUBFAL BIN AHAMAD
B051010158
871202-38-5273
FACULTY OF MANUFACTURING ENGINEERING
2014
DECLARATION
I hereby, declared this report entitled “A Study on Material Management at an
Aerospace Production” is the results of my own research as cited in references.
Signature : ………………………………………….
Author’s Name : ………………………………………….
Date : ………………………………………….
APPROVAL
This report is submitted to the Faculty of Manufacturing Engineering of UTeM as a
partial fulfilment of the requirements for the degree of Bachelor of Manufacturing
Engineering (Manufacturing Management) with Honours. The member of the
supervisory committee is as follow:
(Signature of Supervisory)
………………………………………….
(Official Stamp of Supervisor)
i
ABSTRAK
Dalam setiap organisasi perkilangan memegang stok dari beberapa jenis. Kerana
stok ini adalah mahal dan memerlukan pengurusan yang berhati-hati untuk
membolehkan perubahan dan ketidaktentuan dalam membekal dan permintaan.
Masalah kawalan inventori adalah hampir universal dan telah membangunkan
pelbagai pendekatan untuk mengatasi masalah ini. Kajian ini adalah diarahkan untuk
mencadangkan alat-alat dan teknik-teknik yang sesuai bagi pengurusan inventori
yang lebih baik bagi kos inventori yang tinggi di Syarikat X. Kajian ini bertujuan
untuk mencadangkan penyelesaian untuk peningkatan produktiviti di unit
Pengurusan Bahan pengeluaran Aeroangkasa. Matlamat ini disokong oleh tiga
objektif: i) untuk mengenal pasti item-item kos inventori yang tinggi dan mungkin
memberi kesan kepada prestasi pengeluaran, ii) untuk menganalisis punca kos
inventori yang tinggi iii) untuk mencadangkan penyelesaian untuk mengelak /
mengatasi kos inventori yang tinggi. Rajah Ishikawa dan FMEA telah digunakan
untuk menganalisis punca inventori yang tinggi bahan masuk. Hasil analisis
menunjukkan prepreg telah dikenalpasti sebagai item kelas A bahan masuk yang
menyumbang kepada kos inventori yang tertinggi dalam Syarikat X. Punca-punca
utama kos inventori yang tinggi prepreg telah dijelaskan sebagai SOP yang tidak
sesuai daripada Sistem Pesanan Bahan yang ditentukan melalui skor RPN tertinggi
analisis FMEA. Secara keseluruhannya, kajian ini mempunyai penyelesaian yang
dicadangkan seperti SOP, Pengurusan Visual, Penggunaan Ruang, Perancangan
Kemudahan dan model EOQ di mana alat-alat dan teknik-teknik untuk
mengurangkan kos inventori yang tinggi dalam pengeluaran Aeroangkasa di
Syarikat X.
ii
ABSTRACT
In every manufacturing organisation holds stocks of some kind. As these stocks are
expensive and need careful management to allow for variations and uncertainty in
supply and demand. Problems of inventory control are almost universal and has
developed many approaches for overcome these problems. This study is directed to
propose appropriate tools and techniques for better inventory management of high
inventory cost at Company X. This study aims to propose solutions for productivity
improvement at Material Management unit in Aerospace production. The aim is
supported by three objectives: i) to identify high inventory cost items and its effects
to production performances, ii) to analyse the root-causes of high inventory cost, iii)
to propose solution for avoiding / overcoming the high inventory cost. Ishikawa
Diagram and FMEA have been used to analyse the root-causes of the high inventory
of incoming material. Result of the analysis shows prepreg has been identified as
Class A item of the incoming material which contributes to the highest inventory
cost in Company X. The main root-causes of high inventory cost of prepreg have
been clarified as inappropriate SOP of Material Ordering System which determined
through the highest RPN score of FMEA analysis. Overall, this study has proposed
solutions such as SOP, Visual Management, Space Utilization, Facilities Planning,
and EOQ models that are the tools and techniques to reduce high inventory cost in
Aerospace production at Company X.
iii
DEDICATION
To the soul of my beloved parents, Ahamad A. P. Mustaffa and Sahubarnisa M.
Ibrahim and lovely friends and housemates. There is pleasure to working with all of
the persons who contribute and thank you for the support and encouragement.
iv
ACKNOWLEDGEMENT
First of all, my acknowledgement goes to my PSM supervisor, Dr. Zuhriah binti
Ebrahim for her thought, patience and continues guidance towards this case study. I
also would like to thank all academics staffs in UTeM for teaching me so many
things that I have never been thought before. Also to all staffs in other departments
in this university for the cooperation they have given. Besides, I would like to thank
Head of Continuous Improvement Departmnet, who makes this case study possible
through supportive information and allowing me to conduct case study at his
employed company. My special thanks to the soul of my family and friends for the
continuous support and encouragement.
v
TABLE OF CONTENT
Abstrak i
Abstract ii
Dedication iii
Acknowledgement iv
Table of Content v
List of Table ix
List of Figures x
List of Abbreviations, Symbols and Nomenclatures xii
CHAPTER 1: INTRODUCTION 1 - 8
1.0 Preliminary 1
1.1 Background of the Study 1
1.2 Problem Statement 2
1.3 Aim and Objectives 4
1.4 Scope of the Study 4
1.5 Background of Company X 5
1.5.1 History of Company X 5
vi
1.5.2 Core Business 5
1.5.3 Process Flow 6
1.5.4 Inventory Level 6
1.6 The Importance of Study 8
1.7 Expected Outcome 8
CHAPTER 2: LITERATURE REVIEW 9 - 22
2.0 Preliminary 9
2.1 Material Management 10
2.1.1 Types of Inventories 12
2.1.2 Inventory Models 14
2.1.3 Selective Inventory Control 16
2.1.4 ABC Analysis 18
2.2 Lean Tools and Techniques 20
2.2.1 Ishikawa Diagram 20
2.2.2 Failure Modes and Effects Analysis 20
2.2.3 Standard Operating Procedure 21
2.3 Summary 22
CHAPTER 3: METHODOLOGY 23 - 34
3.0 Preliminary 23
3.1 Planning and Activities 23
vii
3.2 Data Collection and Sample Size 24
3.2.1 Quantitative Data 24
3.2.2 Qualitative Data 26
3.3 Methodology 26
3.3.1 Identify High Inventory Cost Items and Its Effects to
Production Performances (Objective 1) 27
3.3.2 Analysing the Root-causes of High Inventory Cost
(Objective 2) 29
3.3.3 Propose Solution for Avoiding / Overcoming the High
Inventory Cost (Objective 3) 32
3.4 Summary 34
CHAPTER 4: RESULT AND DISCUSSION 35 – 65
4.0 Preliminary 35
4.1 Identify High Inventory Cost Items and Its Effects to Production
Performances (Objective 1) 35
4.1.1 Data Analysis 35
4.1.2 Result and Discussion 38
4.2 Analysing the Root-causes of High Inventory Cost (Objective 2) 43
4.2.1 Data Analysis 43
4.2.2 Result and Discussion 46
4.3 Propose Solution for Avoiding / Overcoming the High
Inventory Cost (Objective 3) 51
4.3.1 Data Analysis 51
viii
4.3.2 Result and Discussion 52
4.4 Summary 65
CHAPTER 5: CONCLUSION AND RECOMMENDATION 68 – 69
5.0 Preliminary 68
5.1 Conclusion 68
5.2 Recommendation 69
REFERENCES 70
APPENDICES 74
Appendix A1 Data for Actual Total Inventory Cost (January 2013)
Appendix A2 Data for Actual Total Inventory Cost (February 2013)
Appendix B Actual Total Inventory Cost
Appendix C Gantt Chart for Final Year Project (PSM I & PSM II)
Appendix D Interview Questions
Appendix E FMEA for High Inventory Cost of Incoming Material
at Company X
Appendix F1 FMEA Scale Description (Severity)
Appendix F2 FMEA Scale Description (Occurrence)
Appendix F3 FMEA Scale Description (Detection)
Appendix G Standard Operating Procedure (SOP)
Appendix H Proposed Manual for MRP System User
Appendix I Facility Planning and Design for Production Lines
ix
LIST OF TABLES
Table Description Page
No. No.
2.1 Process of Management (Datta and Menon, 1998) 11
2.2 Type of Inventories (Datta, 1996) 13
2.3 Selective Inventory Control Titles and Criteria
(Chitale and Gupta, 2006) 17
2.4 Purpose of ABC Analysis (Gopalakrishnan and
Sundaresan, 2006) 19
4.1 List of Inventory Items and Cost (RM) in 2013 37
4.2 Production Performances for Whole Inventory In
Terms of Costs and Units 37
4.3 Production Performances for Prepreg (Class A item) 37
4.4 Results of ABC Analysis 39
4.5 Price and Consumption of Class A Items 39
4.6 Production Performances for Total Inventory Cost In
Terms of Prepreg Cost Contribution 44
4.7 Possible Root-causes sorted From Highest to Lowest
RPN Score with Proposed Solution 53
4.8 Current Practice of Ordering Decision 64
x
LIST OF FIGURES
Figure Description Page
No. No.
1.1 Actual Total Inventory Cost and Budget in January
2013 3
1.2 Actual Total Inventory Cost and Budget in February
2013 3
1.3 The Business Process Flow of Company X 7
2.1 Material Flow Process (Chitale and Gupta, 2004) 11
2.2 Types of Inventory Model (Hadley and Whitin, 1963) 15
3.1 The Process Flow of the Study 25
3.2 Objective 1 Flow Chart Activities 28
3.3 Objective 2 Flow Chart Activities 30
3.4 Objective 3 Flow Chart Activities 33
xi
Figure Description Page
No. No.
4.1 Comparison of Production Performance In Terms
of Output and Target Quantity versus Costs
Contribution 41
4.2 Comparison of Production Performance In Terms
of Output and Target Quantity versus Costs
Contribution 42
4.3 Percentage of Prepreg Cost Contribution in the
Total Inventory Cost 45
4.4 Ishikawa Diagram 47
4.5 Flow Chart of Current Practice SOP’s 54
4.6 Flow Chart of Proposed SOP’s 55
4.7 Current Shelf Life Information Tag 59
4.8 Proposed Shelf Life Information Tag 59
4.9 Current Freezer Layout 60
4.10 Proposed Space Linings Freezer Layout for
FIFO System 60
4.11 Proposed FIFO Tag 61
4.12 Current Layout in Production Lines 63
4.13 Proposed Layout in Production Lines 63
4.14 EOQ Models 64
4.15 Costs by Order Quantity 66
4.16 Inventory Level 67
xii
LIST OF ABBREVIATIONS, SYMBOLS AND
NOMENCLATURE
ABC - Always Better Control
EOQ - Economic Order Quantity
FMEA - Failure Modes and Effects Analysis
JIT - Just In Time
MRP - Material Requirement Planning
RPN - Risk Priority Number
SOP - Standard Operating Procedure
1
CHAPTER 1
INTRODUCTION
1.0 Preliminary
This chapter consists of background of the study, problem statement, aim
and objectives, scope of the study, and background of Company X. The importance
and the expected results of this study are also presented at the end of this chapter.
1.1 Background of the Study
The term inventory used in daily life as manpower inventory, equipment
inventory, documents inventory, raw materials inventory, spare parts inventory,
semi-finished items inventory, finished goods inventory, and others. There is a
different between stock and inventory which; stock consists of all goods and
materials stored by an industry or organisation where supply of items which kept for
future use; but inventory is a list of items held in stock. Waters (2002) have
explained that an immediate problem here is that Americans use “inventory” to
mean both the list of items in stock, and the stock itself. The primary function of
inventory is to serve the customer demand and the primary goal is to minimize
2
inventory investment while still meeting functional requirements. The system that
controls the inventory must be compatible with the goals, functions, and demands of
the particular inventory (Toomey, 2000).
Continuing inventory management effort is required to achieve goals. When talking
about financial aspects, management of an organization inventory to be at the top of
the agenda in the manufacturing industry. An important problem is to make decision
which inventories control system should be chosen so as to counter back
appropriately when the system is subject demand fluctuating. Booney (2000)
discussed the product introduction process, which was taken to include product
design, together with manufacturing systems design that is need to control the
inventory.
Thus, this study focus on investigate the high inventory cost in Company X which
using selective control analysis to find the root-cause. From the understanding of the
problem, this study attempts to propose solutions using appropriate Inventory
Management Tools and Techniques; and Lean Tools and Techniques in order to
reduce the high inventory cost at Company X.
1.2 Problem Statement
Company X experiences problem on frequent high inventory at incoming
material that contribute to additional costs in production operation. There is no
specific guideline to control the incoming material. When come to the material
management, it is more concerned with planning, organizing, and control the flow of
material to achieve quantity at right time and right place at good quality with a
minimum cost. Though the ordering decision mostly made by Supply Chain
Department, but there is still lack of communication within the departments (e.g.
Warehouse and Production Line). Therefore, it is crucial for Company X to improve
the efficiency of its inventory system. As can be seen in Figure 1.1 and 1.2, there
was a fluctuation on the actual total inventory cost for the two months; January (see
Appendix A1) and February (see Appendix A2) of 2013.
3
Figure 1.1: Actual Total Inventory Cost and Budget in January 2013.
Figure 1.2: Actual Total Inventory Cost and Budget in February 2013.
4
There is also providing actual total inventory cost from March 2013 until September
2013 in Appendix B. The actual total inventory cost (red font) is compared with
budget (blue font). Most of the actual total inventory cost of the inventory item
exceeds the budget. The figures prove that high inventory has occurred in the
Company X. Thus, these studies end up proposing solutions using appropriate tools
and techniques for avoiding / overcoming the high inventory cost.
1.3 Aim and Objectives
The aim of this study is to propose solutions for productivity improvement at
Material Management unit in Aerospace production. Thus, three objectives set to
achieve this aim:
i) To identify high inventory cost items and its effects to production
performances.
ii) To analyse the root-causes of high inventory cost.
iii) To propose solution for avoiding / overcoming the high inventory
cost.
1.4 Scope of the Study
The emphasis of this study is concerned on the improvement of incoming
material management which are the main ingredients used to manufacture the
composite parts that having high inventory cost. The study was conducted in Supply
Chain Department, Warehouse, and Production Line in Company X (e.g. Boeing,
Airbus, etc.). The solution will be proposed for productivity improvement at
Material Management unit in Aerospace production.
5
1.5 Background of Company X
1.5.1 History of Company X
Company X is a wholly owned subsidiary of Company XY. It was
incorporated on 1994 as the manufacturing unit of Company XY, focusing on the
manufacturing of composites components for both aerospace and non-aerospace
segments. As the manufacturing unit of Company XY, Company X is equipped with
state-of-the-art equipment and machineries situated in Composites Technology City
in Batu Berendam, Melaka, Malaysia. Their main customers are Spirit Aero
Systems, Goodrich Aero structures, Airbus UK, EADS CASA, SONACA SA,
EADS MAS, GKN Aerospace Services, and BAE Systems Land System. Company
X is set to bring the local aerospace industry to a greater height amidst the stiff
competition in the global aerospace industry. Their strengths are their experience
and skilful personnel, who have attracted a number of leading aerospace companies
offering similar contract work.
1.5.2 Core Business
The core business of Company X is manufacture panel or parts by using
composite technology. Composite technology main ingredients are the prepreg
which use to place inside the panel or parts before curing. Company X has supplier
and customer mostly in foreign country and few in Malaysia.
6
1.5.3 Process Flow
In Company X, same like all other manufacturing organisation start from
supplier until customer. Figure 1.3 shows the flow of inventory system for the
Company X. In the system, invoice between internal customers are used to control
the inventory inside Company X. Each colour in the flow and figure indicates by the
legend box for each category from internal process owner until general which is
Company X.
1.5.4 Inventory Level
Company X produces many panel and parts in order to meet customer
demand by using main ingredient which is prepreg inventory, indirect inventory, and
inventory of chemical, AGS inventory, inventory of honeycomb, inventory of
metallic parts, and inventory of BOF. This entire inventory consumes total cost from
January 2013 until September 2013 with RM558,500,437.00. From this point of
view, this inventory are invest by Company X such a huge amount if estimate for
one year.
Recommended