A range of copper capillary soldering and brazing fittings

• Available in sizes 6-54mm.

• Suitable for connecting copper tubes inaccordance with EN 1057.

• Designed for soldering and brazingapplication with the exception of unionfittings with copper tail, which cannot be brazed.

• Manufactured with copper and gunmetalwhich are immune to dezincification.

Features and Benefits:

A range of copper capillary soldering and brazing fittings.

Conex Delcop End Feed fittings (Silver brazing)

Size (mm)

Working Pressure (bar)-20° to 110°C 150°C 200°C

6 79.1 67.3 35.68 57.9 49.2 26.110 45.7 38.8 20.512 37.7 32.0 17.015 35.1 29.8 15.818 33.3 28.3 15.022 30.6 26.0 13.828 23.8 20.3 10.735 21.1 17.9 9.542 19.3 16.4 8.754 16.3 13.9 7.3

Series 4000 RangeSlip Coupler

DC600From: 15mmTo: 54mm

Straight Coupler

DC601From: 6mmTo: 54mm

Reduced Coupler

DC601RFrom: 8 x 6mmTo: 54 x 42mm

Imperial to MetricAdaptor

DC601IMFrom: 1/2" x 15mmTo: 1" x 28mm

Tap Connector

DC601TCFrom: 15 x 1/2"To: 22 x 3/4"

45º Elbow

DC606From: 15mmTo: 54mm

90º Elbow

DC607From: 6mmTo: 54mm

Reduced Elbow

DC607RFrom: 22 x 15mmTo: 28 x 22mm

Slow Bend

DC607LTFrom: 10mmTo: 54mm

Bent Tap Connector

DC607TCFrom: 15 x 1/2"To: 22 x 3/4"

Tee - Equal

DC611From: 6mmTo: 54mm

Female Elbow

DC7073From: 15 x 1/2"To: 35 x1.1/4"

Tee- Reduced Branch

DC611RBFrom: 15 x15 x10mmTo: 54 x 54 x 42mm

Tee - Reduced End

DC611REFrom: 22 x 15 x 22mmTo: 42 x 28 x 42mm

Tee - Reduced End & Branch

DC611REBFrom: 15 x 10 x 10mmTo: 42 x 35 x 35mm

Tee - Reduced Both Ends

DC611REEFrom: 15 x 15 x 22mmTo: 28 x 28 x 35mm

End Cap

DC617From: 8mmTo: 54mm

Straight Union CopperTail

DC633

Size: 15mm

Straight Union Cone

DC633UAFrom: 22 x 1"To: 28 x 1"

Full Cross Over

DC636From: 15mmTo: 22mm

Part Cross Over

DC636AFrom: 15mmTo: 22mm

Return Bend

DC639From: 15mmTo: 22mm

Extended Elbow

DC640

Size: 22mm

Gas Meter Union

DC690MUFrom: 22 x 1"To: 28 x 1"

Air Vent Coupler

DC701DFrom: 15mmTo: 22mm

Female StraightConnector

DC703From: 15 x 1/2"To: 54 x 2"

Air Vent Elbow

DC705DFrom: 15mmTo: 22mm

Male Straight Connector

DC704From: 15 x 1/4"To: 54 x 2"

Female Wall PlateConnector

DC708From: 15 x 1/2"To: 15 x 1/2"

Tee - Reduced End

DC711

Size: 35 x 15 x 35mm

Pitcher Tee

DC711PFrom: 22mmTo: 54mm

Tee - with FemaleBranch

DC712From: 15 x 15 x 1/2"To: 35 x 35 x 1/2"

Tee with Female End

DC714From: 15 x 1/2" x 15To: 28 x 1/2" x 28

Air Vent Plug

DC716DFrom: 15mmTo: 15mm

Union Coupler

DC733From: 15mmTo: 35mm

Tank Connector

DC750AFrom: 15 x 1/2"To: 28 x 1"

Tank Connector

DC750BFrom: 15 x 1/2"To: 54 x 2"

Cleanout Fitting & Plug

DC816From: 35mmTo: 54mm

Cleanout Fitting & PLugFlush Fitting

DC816SFrom: 35 x 3/4"To: 54 1.1/2"

Fitting Reducer

DC6012From: 8 x 6mmTo: 54 x 42mm

Fitting Reducer

DC6012LFrom: 15 x 10mmTo: 15 x 10mm

Imperial to MetricAdaptor

DC6012MFrom: 3/4" x 22mmTo: 1" x 28mm

45º Street Elbow

DC6062From: 15mmTo: 54mm

Street Bend

DC6072From: 10mmTo: 54mm

Bent Union

DC60763From: 28 x1"To: 28 x1"

Wall Plate Elbow

DC70725From: 15 x 1/2"To: 22 x3/4"

*Conex|Bänninger products are approved by numerous Standards Authorities and Certification Bodies. For more details on this product range, please email our technical team at: technical@ibpgroup.com.

Conex Universal Limited: Global House, 95 Vantage Point, The Pensnett Estate, Kingswinford, West Midlands DY6 7FT, UNITED KINGDOM.Tel: +44 (0)121 557 2831 | Fax: +44 (0)121 520 8778 | Email: salesuk@ibpgroup.co.uk | Website: www.ibpgroup.com

This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.

06/13