View
15
Download
0
Category
Preview:
Citation preview
B
2"
50.7
9
32
"8
13
.50
16
"4
07
28
"7
11
.50
D
F
4"
102
10
"2
54
.25
A
228
.9
" 5 0
Telescopic Leg RangeFrom bottom of glass: 10''-19''
Flare Front Metal FrameRev 4
Model 45 50 60 70 80 100
A- Inch 45 9/16 52 5/16 62 2/16 72 3/16 84 9/16 101 8/16
B- Inch 41 5/16 48 57 13/16 67 11/16 80 1/16 97 3/16
F- Inch 18 9/16 18 9/16 18 9/16 18 9/16 18 9/16 18 9/16
D- Inch 18 1/16 18 1/16 18 1/16 18 1/16 18 1/16 18 1/16
E- Inch 4x6 5x8 5x8 5x8 5x8 5x8
Fireplace Dimensions
Appliance Location
4" min.102 min.
1" min.
25 min. 2 "min.
51 min.
Clearances below are to non-combustible materials.
Chimney Installation
Horizontal Termination Vertical Termination
For 5 x 8 vent size create 10'' x 12'' vent termination opening
For 5 x 8 vent size create 10'' x 10'' vent termination opening
10"254
12"305
10"254
4"m
ax.
10
2m
ax.
2"m
in.
51
min
.
10"
25
4
Flat Vs. L Shape Installation For Flare Front Fireplace
Flat Installation Example L Shape Installation Example
4"102 Max. Shelf Width
Heat Release and Air Intakes
The following sizes MUST be maintained for the upper heat release:For fireplaces sized 80” & 100”– vent area must be at least 200 square inches.For fireplaces sized 60” & 70” - vent area must be at least 140 square inches.For fireplace sized 50” and below - vent area must be at least 100 square inches.
The following sizes MUST be maintained for the lower air intake:For fireplaces sized 80” & 100” – vent area must be at least 100 square inches.For fireplaces sized 60” & 70” - vent area must be at least 70 square inches.For fireplaces sized 50” and below - vent area must be at least 50 square inches.For See Through and Room Definer fireplaces, the air intake requirements are double.NOTE: Openings above for Heat Release and Air Intake are measured for open air space. NOTE: On all See Through and Room Definer units the air intake must be doubled
Metal Framing Dimensions
Rev 04
NOTE: Dimension ‘Y’ uses legs at default lowest height 4” below the unit with glass beginning 10” above the floor. Increase leg height and Y dimension for higher viewing window. All framing and finishing must be secured to your projects back wall, ceiling or floor, and must never bear weight on the fireplace in any circumstance. For more information reference the Installation Manual
Z
Y
X
Metal stud with Non-
Combustible Back
Wall
Inch 46 9/16 32 8/16
mm 1169 1029
Inch 53 5/16 32 8/16
mm 1354 1029
Inch 63 2/16 32 8/16
mm 1603 1029
Inch 73 3/16 32 8/16
mm 1853 1029
Inch 85 9/16 32 8/16
mm 2173 1029
Inch 102 8/16 32 8/16
mm 2604 1029
4524 1/1620 1/16
510 611
Recess Installation ( 4" Max)
ZX Y
Flat Installation
6020 1/16
510
24 1/16
611
5020 1/16
510
24 1/16
611
8020 1/16
510
24 1/16
611
7020 1/16
510
24 1/16
611
10020 1/16
510 611
24 1/16
Metal Framing Materials &
Clearances
Rev 04
EXAMPLE OF CLEARANCES TO SIDES AND BACK
Recommended