View
212
Download
0
Category
Preview:
Citation preview
AITECH MANUAL 2017 Page 1
A I T E C H Accreditation of Innovative Technologies for Housing
TABLE OF CONTENTS
I. BACKGROUND
II. AITECH COMMITTEE MEMBERS AGENCIES
III. OBJECTIVES OF THE AITECH INTER-AGENCY COMMITTEE
IV. SCOPE OF WORK AND FUNCTIONS OF THE AITECH INTER-
AGENCY COMMITTEE
V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES
VI. DEFINITION OF TECHNOLOGY
VII. CRITERIA FOR ACCREDITATION
VIII. STEPS IN ACCREDITATION
IX. PROCESS FLOW CHART
X. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION
A. Building System
B. Material Only
XI. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES
APPLIED FOR AITECH ACCREDITATION
XII. SCHEDULE OF FEES
XIII. LIST OF ACCREDITED TECHNOLOGIES
AITECH MANUAL 2017
Page 2
I. BACKGROUND AITECH stands for Accreditation of Innovative Technologies for Housing. It is a system for accrediting innovative technologies for housing. AITECH was conceived as a result of the numerous building technologies that have been developed in the last few years using non-traditional or alternative materials and systems. Cognizant of their potential in reducing over-all housing costs, it has become imperative to accredit these innovative technologies for low-cost housing. AITECH responds to queries and requests from private manufacturers of indigenous and innovative building materials/systems for technical and engineering evaluation leading to accreditation of these products. The AITECH Inter-Agency Committee reviews and accredits the technologies.
II. COMMITTEE MEMBERS
The AITECH Committee is composed of the following agencies:
Housing and Urban Development Coordinating Council (HUDCC)
National Housing Authority (NHA)
Department of Science and Technology (DOST)
Home Guaranty Corporation (HGC)
Department of Public Works and Highways (DPWH)
Housing and Land Use Regulatory Board (HLURB)
Home Development Mutual Fund (HDMF)
National Home Mortgage Finance Corporation (NHMFC)
Construction Industry Authority of the Philippines (CIAP)
Department of Trade and Industry – Bureau of Product Standards (DTI – BPS)
University of the Philippines – Building Research Service (UP – BRS)
III. OBJECTIVES OF THE COMMITTEE The AITECH Committee acts as a review and approving body for applications for accreditation of innovative technologies appropriate for housing. Its main objective is to assist producers of innovative technologies in securing acceptance of their products or systems in the market as well as to make these technologies acceptable for funding under government housing loan programs. The Committee also aims to encourage and promote the use of innovative technologies as an alternative to traditional housing construction system; and to develop standards, guidelines, and procedures for accreditation system.
AITECH MANUAL 2017 Page 3
IV. SCOPE OF WORK AND FUNCTIONS OF THE COMMITTEE The AITECH Committee reviews applications for accreditation of new and improved technologies which are appropriate for housing and can serve as alternatives to traditional or conventional building technologies. The Committee performs the following functions:
1. Review and approve applications for materials testing and engineering and economic evaluation of local and/or foreign innovative housing technologies;
2. Provide services as testing, wherein evaluating agencies conduct the necessary validation on innovative technology systems / materials;
3. Issue certificates of validation and / or accreditation to manufacturers / owners of approved innovative technology systems / materials;
4. Issue implementing guidelines and procedures on the said accreditation system for public dissemination;
5. Determine the amount of processing fee to be charged by testing / evaluating agencies for the information of applicants;
6. Establish performance and cost standards and identify relevant tests for building materials / systems as the basis for evaluating and accrediting innovative technology systems / materials;
7. Review appropriate applications of new technologies and use of innovative building materials;
8. Provider a short-list of accredited building technologies to funding institutions and dissemination of information to other possible end-users; and
9. Undertake such other functions as may be necessary to disseminate information to support its primary functions.
V. ROLES AND RESPONSIBILITIES OF PARTICIPATING AGENCIES
The roles and responsibilities of participating agencies are:
1. HUDCC – gives final approval for issuance of accreditation certificate. The HUDCC Chairman affixes his signature on the certificate.
2. NHA – evaluates applications based on checklist of requirements; refers to evaluating agencies (UP-BRS, DOST, DPWH); evaluates and validates costs and structural designs; and consolidates evaluation results. Also assigned as AITECH secretariat.
3. DOST-PCIEERD – evaluates materials properties (physical, mechanical behavior, etc); and conducts research and development of new technologies.
4. HGC – appraises housing unit. 5. UP-BRS – evaluates structural designs, properties of building materials,
and overall technical feasibility of technologies, and conducts information dissemination.
AITECH MANUAL 2017 Page 4
6. DPWH-BRS – evaluates structural designs and properties of building materials.
7. HDMF – reviews and accepts accredited technologies for mortgage financing under UHLP and HDMF housing loan programs.
8. NHMFC – reviews and accepts accredited technologies for mortgage financing under UHLP.
9. CIAP – disseminates information; and includes applicable technologies in the Modular Coordination System.
10. HLURB – evaluates technologies for compliance with housing standards based on BP 220 / National Building Code.
11. DTI-BPS – monitors quality of production through regular inspection of local production plants; and takes charge of patenting technologies.
VI. DEFINITION OF TECHNOLOGY
The term “technology” refers to (1) new production processes of existing systems/materials; (2) new construction techniques applied or utilized in low-cost housing units; and (3) new building materials designed to serve as alternatives to traditional or conventional components. The technologies considered for application are the following:
1. Locally developed and manufactured building systems / materials appropriated for housing including their construction techniques / systems; and
2. Building systems / materials developed in other countries, whether being introduced to the country or have been adopted and manufactured locally with or without modifications.
VII. CRITERIA FOR ACCREDITATION
Innovative technologies include local and international technologies that use non-traditional or alternative materials or system with significant reductions in construction costs (thereby insuring affordability) as opposed to the use of conventional materials and systems (e.g. concrete hollow blocks). In addition, innovative technologies place emphasis on environmental considerations. Evaluation of Committee member agencies are based on the following:
a) Compliance to housing standards based on BP 220, PD 957 and the National Building Code, Fire Code, BP344 & other applicable laws;
b) Structural evaluation / validation of submitted structural designs (based on design load and allowable applied stresses); Cost effectiveness based on the resulting construction costs (current cost estimates of housing construction inclusive of mark-up) as compared with housing units built with conventional building
AITECH MANUAL 2017 Page 5
c) technologies. Use of special equipment and costs of transport shipment of materials should also be incorporated in cost estimates;
d) Appraisal / validation of housing units using the technology for mortgage acceptance by funding institutions;
e) Physical properties and structural soundness of technologies in relation to health consideration and suitability to local climactic and topographic conditions;
f) Locally available raw materials for the production / use of particular technologies; and
g) Consistency of required quality in mass production.
VIII. STEPS IN ACCREDITATION
Technology evaluation shall be based on the information provided in all documents submitted to the AITECH Secretariat as well as on plant and site inspection conducted by the AITECH member-agencies. The steps in accreditation are as follows:
1. The proponent submits AITECH accreditation application. 2. AITECH Secretariat receives application and reviews attached
documents if complete. 3. If documents are complete, AITECH Secretariat issues Order of Payment
for Evaluation Fee. 4. NHA-HTDO evaluates compliance to standards, structural design, cost
evaluation or seek assistance of support agencies. Forward to DPWH, ASEP for complicated structural analysis, and / or to UP – BRS / DPWH – BRS / DOST for testing.
5. Conduct of Site/Plant visit and Inspection. 6. AITECH Secretariat prepares Consolidated Report and
Recommendation to be submitted to GM for endorsement to HUDCC Chair.
7. GM to endorse the recommendation for AITECH accreditation to HUDCC Chair. HUDCC Chair approves recommendation and signs AITECH accreditation certificate.
8. Secures approved AITECH accreditation certificate and informs proponent.
AITECH MANUAL 2017 Page 6
IX. PROCESS FLOW CHART
.
V
PROCESS FLOW CHART
ACCREDITATION OF INNOVATIVE TECHNOLOGIES FOR HOUSING
(AITECH)
Submits AITECH Accreditation Application
AITECH Secretariat receives application and reviews attached documents if
complete
If documents are complete
Pays fee and returns copy of receipt
AITECH Secretariat issues Order of Payment for
Evaluation Fee
NHA-HTDO evaluates structural design/cost evaluation or seek assistance of support agencies
Forward to DPWH, ASEP for complicated structural analysis,
and/or to UP-BRS/DPWH-BRS/DOST for testing
AITECH Secretariat prepares Consolidated Report and Recommendation to be
submitted to GM for endorsement to HUDCC
Chair
GM to endorse the recommendation for AITECH
Accreditation to HUDCC Chair
HUDCC Chair approves recommendation and signs
AITECH Accreditation Certificate
Secures approved AITECH Accreditation Certificate and
informs Proponent
Receives signed/approved AITECH Accreditation
Certificate*
* Yearly monitoring of the accredited technology is being conducted by AITECH Secretariat
PROPONENT NHA OTHER AGENCIES
AITECH MANUAL 2017 Checklist of Requirements Page 7
I. CHECKLIST OF REQUIREMENTS FOR ACCREDITATION
BUILDING SYSTEM
Note: All documents should be submitted in three (3) sets except for sample technology
1. Building Technology Proposal (Application Form)
2. Company Profile supported with Registration Certificate from SEC for corporations, DTI for soles proprietorship or CDA for cooperatives. 3. Audited Financial Statements which shall include Accountants Statement and Income Tax Return stamped and duly received by the BIR 4. Technology Brochures
5. Sample Material
6. Economic Life Span (signed warranty)
7. Test Results – Fire resistance test, Moisture resistance test, Compressive strength test and other tests needed in the technical evaluation shall be conducted by the following accredited testing center agencies/laboratories: Tests Accredited Testing Agencies Moisture Test DPWH (MATEST) 642-0664 Compressive and Tensile Test DOST 837-2071 / UP-BRS 981-8500 Fire Test FPRDI 049-5362360 Water Test LLDA 286-6143 286-6123 Note: Foreign Trade results shall be accompanied by a letter of Certification from the Embassy where the test was conducted 8. Copy of Title of Patent (if applicable)
9. Technical Manual
10. White/Blue print of signed and sealed Building Plans (3 sets-20” x 30” and and 3 sets-A3) 11. Building Specifications signed and sealed
12. Bill of Material / Cost Estimates (Direct Cost) and Selling Cost per unit signed and sealed 13. Cost Comparison between the applied innovative technology , material and the conventional 14. Structural Design Analysis and Computation in Metric System signed and sealed 15. Photocopy of license / Architect
16. List of Completed and On-going Projects using the applied technology / material
17. Ocular inspection of Plant, Completed and On-going Projects using the applied technology 18. Technology Power Point Presentation
AITECH MANUAL 2017 Checklist of Requirements Page 8
MATERIALS ONLY
Note: All documents should be submitted in three (3) sets except for sample material
1. Building Technology Proposal (Application Form)
2. Company Profile supported with Registration Certificate from SEC for corporations, DTI for soles proprietorship or CDA for cooperatives.
3. Audited Financial Statements which shall include Accountants Statement and Income Tax Return stamped and duly received by the BIR
4. Technology Brochures
5. Sample Material
6. Economic Life Span (signed warranty)
7. Test Results – Fire resistance test, Moisture resistance test, Compressive strength test and other tests needed in the technical evaluation shall be conducted by the following accredited testing center agencies/laboratories: Tests Accredited Testing Agencies Moisture Test DPWH (MATEST) 642-0664 Compressive and Tensile Test DOST 837-2071 / UP-BRS 981-8500 Fire Test FPRDI 049-5362360 Water Test LLDA 286-6143 286-6123 Note: Foreign Trade results shall be accompanied by a letter of Certification from the Embassy where the test was conducted 8. Copy of Title of Patent (if applicable)
9. Technical Manual
10. Bill of Material / Cost Estimates (Direct Cost) and Selling Cost per unit signed and sealed 11. Cost Comparison between the applied innovative technology , material and the conventional 12. List of Completed and On-going Projects using the applied technology / material 13. Ocular inspection of Plant, Completed and On-going Projects using the applied technology 14. Technology Power Point Presentation
AITECH MANUAL 2017 Criteria of Evaluation Page 9
X. CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES APPLIED FOR AITECH ACCREDITATION
BUILDING SYSTEM/ MATERIALS
I. Performance Specs 1. Materials Strength
Load Bearing
400 to 600 psi 10%
Above 600 psi 15%
Non-Load Bearing
300 psi 5%
Above 300 psi 10%
2. Fire Rating
One (1) hour fire resistant 5%
Above 1 hour fire resistive rating 10%
3. Moisture
Non-Resistant 0%
Resistant 10%
4. Economic Lifespan
Below 5 yrs fail
5 to 20 yrs 5%
21 to 34 yrs 8%
35 years above 10%
5. Adaptability to Other Technologies
Non adaptable (closed system – requires special design when inter-connected with other building materials)
0%
Adaptable (open system – can be easily connected with other building materials)
10%
6. Green Component
With component 0%
Without Component 10%
II. Cost compared to Conventional Construction
Below 5% fail
6 to 14% 5%
15% to 20% 10%
Above 20% 15%
AITECH MANUAL 2017 Criteria of Evaluation Page 10
III. Housing Production Rate compared to Conventional Construction
Below 10% Faster 0%
10 to 20% Faster 5%
Above 20% Faster 10%
IV. Production Capacity(No. of Units Supplied/Delivered per month)
Availability of local material 5%
Existence of local plant and warehouse 5%
Warehouse only with plant abroad 3%
V. Units Completed Using Technology
0 0%
Below 20 units * 5%
Above 20 units 10%
*20 units is defined as the number of housing units considered as mass housing
PROPOSED CRITERIA FOR EVALUATION OF INNOVATIVE TECHNOLOGIES
APPLIED FOR AITECH ACCREDITATION
FORMS/PAINT/SOIL STABILIZERS
I. Performance Specs Adaptability to other Technologies
Non-Adaptable 0%
Adaptable 10%
II. Cost compared to Conventional
Below 5% fail
6% to 14 % 20%
15 to 20% 30%
Above 20% 40%
III. Housing Production Rate compared to Conventional Construction
Below 10% Faster 0%
10 to 20% Faster 20%
Above 20% Faster 30%
IV. Units Completed Using Technology
0 0%
Below 20 units 10%
Above 20 units 20%
*20 units is defined as the number of housing units considered as mass housing
AITECH MANUAL 2017 Criteria of Evaluation Page 11
OTHER BUILDING COMPONENTS /SEPTIC TANK / WATER TANK I. Performance Specs 1.1 Material Strength Tensile Strength
Below 15 MPa 5%
15MPa and above 15%
1.2 Economic Life Span
Below 5 years 5%
5 to 20 years 10%
Above 20 years 15%
II. Cost compared to Conventional
Below 10% 5%
10% to 20% 10%
Above 20% 20%
III. Production rate compared to Conventional
Below 10% Faster 5%
10 to 20% Faster 10%
Above 20% Faster 20%
IV. Production Capacity
Availability of local material 3%
Existence of local plant and warehouse 5%
Warehouse only with plant abroad 10%
V. Units Completed
0 0%
Below 20 units * 10%
Above 20 units 20%
*20 units is defined as the number of housing units considered as mass housing
(40% to 60%) - One (1) year accreditation (61% to 100%) - Three (3) years accreditation
XI. SCHEDULE OF FEES (subject to change)
1. One (1) to Four (4) Storey P 5,000.00 2. Five (5) Storey and Above P 12,000.00 3. Materials Only P 5,000.00
AITECH MANUAL 2017 Medium Rise Building Page 12
XII. LIST OF ACCREDITED TECHNOLOGIES
MEDIUM RISE BUILDING
E. FLORENTINO + ASSOCIATES Modular Ferro- Concrete (MFC) Building System
Modular Ferro Concrete (MFC) Building System is a modular building system
creatively responding to housing and building needs. It is a standard building system
that is value-engineered, structurally conceptualized, guaranteed, quality and time
controlled. MFC combines and integrates structural sheet (light to heavy structural
shapes, plates, pipes, or bars, hence the word “ferro” or iron) with ferrocement (the
science of thin shell concrete) or concrete construction to have the features better
than other system.
MEGAWIDE CONSTRUCTION CORP. Alufix Formworks (Alufix: Walls & Slabs)
Alufix is a hand-set formwork that covers walls and slabs in one and the same system.
It is lightweight, crane-independent and flexible for walls and slabs. The frames are
made of closed 3-chamber powder coated aluminium profile (double groove) or 2-
chamber aluminium profile (single groove).
Contact Person: Gilberto C. Rubio, Jr.
67 Scout Reyes St., Bgy. Paligsahan, QC
T: 372-3201 / F: 372-3205
Validity: February 1, 2013 to February 1, 2018
Contact Person: Engr. Edgar Saavedra, President
20 N. Domingo Street, Brgy. Valencia, QC, 1112
T: 655-1111 / 655-7958 / 655-9164 loc. 805 / F: 655-0974
Validity: April 22, 2013 to April 22, 2018
AITECH MANUAL 2017 Medium Rise Building Page 13
JOSE CRIS BUILDERS JC Wall Slab System
JC Wall slab system is a shear wall construction system composed of aluminium
forms with thickness of 13mm designed to shorten construction time. Based on the
test conducted, breaking load is 70,680N while the yield and tensile strength is 244
and 268 Mpa, respectively.
Amsteel Structure Tunnel Form
Use of Beam Walls & Structural slabs, in cast-in-place walls & slabs. That will be time
efficient and can deliver quality structures.
FORMING ACCESS & SUPPORT, INC. Aluma Easy Set Housing and Building System
Aluma Easy Set Housing and Building System is an Aluminum Panel Form with all
accessories that is manually installed & stripped for the next use. It has special
features that make it strongest panel in the market. It has features that make it fast to
install & strip for next. The system is versatile for use for formworks for gang wall /
columns forms, for shuttering, for table forms & complete with accessories to use
18mm plywood for fillers. The methodology of construction is shearwall & slab (with
or w/out ream) poured monolithically of ready mix concrete on external wall with
windows & other openings, partition wall with doorway staircase & slab in 1 time work
sequence.
Contact Person : Mr. Frederick J. Erum, President
227 GP Eastbank Rd., Kapitbahayan, Bgy. Sta. Lucia,
Manggahan Floodway, Pasig City
T: 748-0424 / F: 748-0805 / C:0917-89664445
Contact Person: Mr. Austin Arcega, Managing Director
71 Timog Ave., Quezon City
T: 426-3905 / 426-3902 / 0917-8123894
Validity: July 2014 to July 2017
Contact Person : Mr. Frederick J. Erum, President
227 GP Eastbank Rd., Kapitbahayan, Bgy. Sta. Lucia,
Manggahan Floodway, Pasig City
T: 748-0424 / F: 748-0805 / C:0917-89664445
Validity: April 30, 2014 to April 30, 2017
Validity: April 30, 2014 to April 30, 2017
AITECH MANUAL 2017 Medium Rise Building Page 14
BEC SPECIALISTS PHILIPPINES, INC. Safe and Modular Housing Technology (SAM HT)
It is a machine forming technology that enables manufacturing like applications to the
construction industry. US patented technology is used tro form seismically and
typhoon-resistant reinforced concrete homes quickly and efficiently.
BLUEPLOT DEVELOPMENT CORPORATION Sandwich Propor Panels and Steel Bar Truss Deck System
The technology includes the Propor Sandwich Panels produced by the company and the Special Steel Structure incorporated with the panel. Its advantages are the following: it is fireproof, waterproof, moisture proof, fast to build, competitive in cost compared to conventional building materials.
INQUINA DEVELOPMENT CORPORATION Sandwich Propor Panels with H-Steel Structure
This includes the Propor Sandwich Panel produced by the company itself and the H steel structure incorporated with the panel. These materials are fireproof, waterproof, moisture proof, fast to build and with competitive cost compared to conventional building materials.
Contact Person: Joanalyn Flores, Secretary
Unit 1807 Echeleon Tower 2100 A. Mabini St.
Malate, Manila
M: 09156339280
Validity: June 23, 2016 to June 23, 2017
Contact Person: Rosemarie H. Reyes, Manager
Rm. 203 2nd Flr, ROA Bldg., San Vicente, Bgy.Nueva,
San Pedro Laguna
T: 925-6268/ M: 0927-1288950
Validity: November 24, 2016 to November 24, 2017
Contact Person : Mr. Patrick Oliver Gabriel
12/F Robinson's Summit Ctr, 6783 Ayala Ave., Makati City
M: 0915-3037117
Email add : pfgabriel@yahoo.com.ph
Validity: July 2014 to July 2017
AITECH MANUAL 2017 One to Two Storey Building Page 15
ONE TO TWO STOREY BUILDING
VASQUEZ BUILDING SYSTEM CORPORATION Vasquez Building System
The Vazquez Building System is a Filipino invention which is affordable & ideal for
mass housing projects. The technology consists of pre-fabricated columns, beams &
wall panels, designed for one or two-storey building footing. Columns are erected on
conventional footing and the beams are welded at second floor between the columns
to carry the 2nd floor slab and panels.
STERLING CONSTRUCTION AND DEVELOPMENT CORPORATION
Plaswall
Plaswall is a permanent formwork comprising a spacer and fiber cement boards that
serve as the finished wall surface. No plastering is needed when filled with concrete
where a monolithic structural bearing and shear wall is formed. It is faster than any
conventional masonry construction and eliminates time consuming practices.
Plaswall provides considerable savings in construction time thus reducing labor cost.
The system can meet all design requirements. If needed, additional load capacity can
be obtained by providing additional reinforcing bars and/or increasing the grade of the
concrete as per discretion of the Structural Engineer.
NEDSTEEL CONSTRUCTION AND DEVELOPMENT CORPORATION Light Gauge Steel Framing System
Light Gauge Steel (LGS) Framing System is an innovative approach for building mass
housing units. LGS Frames are fabricated out of lighweight high tensile steel coils. It
is consistent material because it does not wave, split, sprinter, or burn. It’s cost
Contact Person: Arch. Oliver Olarte
Lot 8 Block 13 Goldenville Business Park, Carmona, Cavite
T: 889-0934 / 844-7160
Validity: February 1, 2013 to February 1, 2018
Contact Person: Lilibeth Legasto
No. 1269 EDSA Balintawak, Q. City
T: 363-4545; 411-5400 / F: 361-4611
Validity: July 20, 2012 to July 20, 2017
AITECH MANUAL 2017 One to Two Storey Building Page 16
effective and environment friendly because it is from 66% recycled steel. It is
lighweight yet durable.
REALM HOMEBUILDERS Permaforms
Permaforms is a system that has a main component of double panel boards (Fiber
Cement Board) and is adhesively separated by an adaptor that are glued at its inner
surface. The adaptor is glued at pattern that would allow the flow of concrete inside
the panel. This is in replacement or a better alternative than a conventional concrete
hollow block wall or masonry wall. Concrete in-fill & reinforcement (by others) may
vary depending on the design requirements by structural.
LIVE IN QUARTERS STEEL CORPORATION Lighweight Structural Framing System
Lightweight Steel Structural System is sheet steel that is framed into shapes and sizes
such as 2 x 4, 2 x 8 and so forth. Steel framing members are framed in a process
called roll forming by passing sheet steel through a series of rollers to form the bends
that make the shape, e.g. the web, flanges and lips of a stud or C-shape because this
process is done with heat (also called “cold framing”). The studs and joists are made
stronger than the original sheet
Contact Person: Mr. R. Donald D. Lirio, Jr., President
88 Shaw Boulevard, Oranbo, Pasig City
T: 466-3525 / TF: 738-3046 / E: rddlirio@nedsteel.net
Validity: December 1, 2013 to December 1, 2018
Contact Person : Ar. Don de Vera, Managing Director
605 Richville Tower, Alabang Zapote, Madrigal Business
Park, Alabang
T: 809-6510 to 12 / M: 0917-8880468
Validity: April 30, 2014 to April 30, 2019
Contact Person : Ms. Rose Joan Aquino, President
# 611 Boni Avenue, Brgy. Plainview, Mandaluyong City
T: 470-7447 M# 0932-8606256 / 0926-6469539
Validity: January 8, 2014 to January 8, 2017
AITECH MANUAL 2017 One to Two Storey Building Page 17
PRISMODIAL CONSTRUCTION CORP. ASSOCIATES: CNYD TRV (CHINA) AND JGP MODULAR SYSTEMS Structural Insulated Panel
An innovative housing concept utilizing Structural Insulation Panel (3) TRV System
wallboard, floor and roofing pre-fabricated components making the construction
process fast and easy. Salient features of the technology are Typhoon resilient, fire,
wind and earthquake resistant.
SKS CONSTRUCTION AND DEVELOPMENT CORPORATION SKS Structural Steel Framing System
SKS Structural Steel Framing System is a unique framing made by feeding high tensile steel galvanized or zincalume coil to our machine which then forms the said steel framing profile. SKS Steel Framing is perfect for mass housing as its frames are pre-cut, pre-holed and pre-punched, making it not only cost-effective and builder efficient, but also structurally sound. Frames are screwed and riveted together, interlocked and erected together based on designs of a structural engineer.
MODULARIS INGENIARE INC Pre-cast Concrete Box System Modular Houses Modularis Ingenaire's on-site precast concrete construction system delivers fast, inexpensive and superior modular housing solutions. It is ten times faster than regular construction, structurally stable and conforms to National Building Standards.
Contact Person : Engr. Rolando Ramon Adea
297 Santo Rosario St., Plainview, Mandaluyong City
M: 0916-4814866 / 0932-7240291
Validity: July 2014 to July 2017
Contact Person: Mr. Stewart Kevin Plibundo, Manager
4 Apo St., Quezon City
T: 731-0011/731-0022/ F:740-5416 / M:0917-8375410
Email add: skp@sks.com.ph
Validity: June 16, 2015 to June 16, 2018
Contact Person: Alvin Cabatit, President;
Ar. Richard Agbulos, VP-Design
1152 Seneca Plaza Suite 302, E. Rodriguez Sr. Avenue, QC
M: 09175286650
Validity: September 8, 2015 to September 8, 2018
AITECH MANUAL 2017 One to Two Storey Building Page 18
DAZZLING LITE ENTERPRISES Disaster Resistant Dome House
The Monolithic Dome provides what Federal Emergency Management Agency (FEMA) of USA calls "near absolute protection". They are also fire-resistant, rot-proof and termite-proof. That unbeatable strength comes from the concrete and steel used in the dome's construction and from its round shape. Monolithic Dome is the most disaster resistant building that can be built at a reasonable price. A wind 250 MPH (used by FEMA 361) pushes with a pressure of 300 pounds per square foot. If the wind speed increases to 300 miles per hour, the pressure increases to 404 pounds per square foot (psf). Wind speed of 300 MPH is considered maximum for a tornado. A force of 5 tornado pushes with 4 times the pressure of a force of hurricane. No normal building can withstand such pressure. Disaster Proof Monolithic Dome Structure can withstand more than 350KPH and this technology is approved by FEMA Federal Emergency Management Agency in USA.
BASE BAHAY INC. Cement-Bamboo Frame Technology
Base advocates for the use of local and renewable materials for construction – embedded in resilient and sustainable building concepts in the Philippines. It unlocks the raw material potential of bamboo and transforms it into reliable structural components for resilient shelters. The building technology improves the local economy, is socially inclusive, provides disaster-resistant and comfortable homes and contributes to climate change mitigation and cleaner environment – at all affordable costs. It can compete with conventional construction methods in terms of economy, technology, society and ecology. Moreover, construction duration is reduced and the technology can be easily learned by skilled workers.
Contact Person: Ms. Jenelyn O. Yuson, General Manager
135-E Kamias Road, Anonas Ave., Sikatuna Village, Q.C.
T: 960-2474
E: dazzlinglite.enterprises@gmail.com /
Validity: November 24, 2016 to November 24, 2017
Contact Person: Maricen Jalandoni, General Manager
HILTI SEA Training Cntr, UPRC III Bldg., 2289 Chino Roces
Ext., Makati City
M: 0917-8744533
E: maricen.jalandoni@base-bahay.com
Validity: November 24, 2016 to November 24, 2017
AITECH MANUAL 2017 One to Two Storey Building Page 19
PALIGID DEVELOPMENT CORPORATION
Eco-Key System (for 22 sq.m. and 26 sq.m. Housing)
The board can be used for external and internal walls. Main ingredient: Calcium silica. Fire rating: A-level. Available size: 1220mm x 2440mm; Density: 0.90 t/m3 – 1.40 t/m3; Features: 100% Asbestos free, lightweight, moisture-resistant. Easy to work, fix and decorate.
HAUSLAND DEV'T CORP./FIESTA COMMUNITIES INC. Load Bearing CHB
The Hausland Load Bearing Wall are load bearing concrete hollow blocks system designed as shear wall. The load-bearing concrete hollow blocks are laid in a single layer after which, the vertical hollows are filled with mortar up to the top surface thereby creating micro-columns. The reinforcements are welded together and blocks are locked at the end corners for a more stable structure.
FLORIDABLANCA CONTRUCTION AND DEV'T CORP. Precast Concrete Panel Structure
Precast Concrete Panel Structure is a building system using precast wall panel to make production of houses more efficient. Precast wall panel is a construction product produced by reinforced concrete cast in a reusable mold or form.
Contact Person: Engr. Pedro M. Tolentino
HLDC Corporate Center, 43-35 Don Bonifacio Ave. Pulung
Maragul, Angeles City, Pampanga
T: 893-2935/ 625-7112
Validity: June 23, 2016 to June 23, 2019
Contact Person: Copernico V.Echavez Jr., Project Manager
385 Macabulos St., Tomas Carmen Bldg., Bgy. Bankal,
Makati City
M: 0927-3934957
Validity: November 24, 2016 to November 24, 2017
Contact Person: Ms. Heaven Peñaflorida, Manager
210A, Orbit St. Bel-air Village Phase 2 Makati City
T: 833-0715 / M: 0936-8327363
Validity: October 9, 2015 to October 9, 2018
AITECH MANUAL 2017 One to Two Storey Building Page 20
PHILIPPINE STEEL FRAMING CORPORATION Housetek
Housetek is world class hybrid framing system that transforms into a strong steel framing system (Optimus Frame) with lightweight concrete (Teknocrete) walling to create an optimized steel building system for mass housing, residential, school, commercial, and agro- industrial structures. Optimus frame steel building system promises optimized strength, quality, speed, versatility, and cost savings.
8990 CEBU HOUSING DEVELOPMENT CORP. Deca Homes Precast Technology for Housing
In the early 90’s the method of construction of the housing units developed by the 8990 Group was by traditional or CHB piling wherein all walls are non-loadbearing and main structures were reinforced footings, columns and beams. The duration for house construction was between 45 to 60 days. In the late 90s the company developed its Cast-in-Place technology and shortened the construction period to 25 days. In 2003, the company started to invest in the development of its own precast technology that was perfected after one year. The Deca Homes Precast Technology can finish a house in 8 days for the townhouse model, 7 days for the single attached model, 18 days for the single attached loft type model and 30 days for the 80-unit walk up condominium units. All walls are made of reinforced concrete with a design of 3000 to 4000psi concrete strength. This enables the company to provide decent shelter with affordable prices to the Filipino community.
Contact Person: Engr. Leo Siobal, Engineering Manager
Bgy. Del Rosario, San Fernando, Pampanga
M: 0917-5924469/0917-5143946
Validity: November 24, 2016 to November 24, 2017
Contact Person : Mr. Jesus B. Atencio, CEO
Mr. Alexander Ace S. Sotto, Gen. Mngr. - Construction
Negros St. Cebu Business Park, Cebu City
T: 412-5194 / M: 09999902705
Validity: October 9, 2015 to October 9, 2018
AITECH MANUAL 2017 One to Two Storey Building Page 21
LICIADA INNOVATIONS, INC. FCS Bricks
FCS Bricks is an interlocking brick system. FCS Interlocking Brick system saves cost by eliminating formworks for reinforced concrete columns and beams, plastering and painting costs, reducing many workers, steels and cements. Constructing column and beam without the needs of plywood formworks as well as eliminating the plastering works, weather proof construction, are ones of the key factors why it may be finished faster than conventional construction.
UNIMORE INTERNATIONAL TRADING COMPANY Pre-Engineered Housing System
Pre-engineered Housing System using Steel Framing and Concrete materials. A pre-engineered house is a metal structure that consists of light frame metal standing seam roof panels on beam box/purlins spanning between ficem boards as frames and concrete wall.
Contact Person: Alma Postrano, Head - Marketing Department
9024 Barangay Liciada, Bustos, Bulacan
T: 584-0000 584-6868/ M: 0917-6272330
Validity: November 24, 2016 to November 24, 2017
Contact Person: Fenton Chua – VP Operations
18th Floor Unit C, The Eastwood, La Fayette 3, Eastwood City
Libis, Quezon City
T: 718-5291
Validity: November 24, 2016 to November 24, 2019
AITECH MANUAL 2017 High Rise Building Page 22
HIGH RISE BUILDING
MEGAWIDE CONSTRUCTION CORP. Mammut Formworks
Mammut System has redefined standards in wall formworks consisting of versatile
panels with complete accessories. It is crane dependent and its frames are made of
closed steel profiles with special coating. It has an all-around grooves and assembly
lock that guarantees a steepless, tight and perfectly aligned panel connection. It is
ideal for every high and large structure with concrete load capacity of up to 100kN/m2.
It brings a superior concrete finish with it all plastic 100% wood free facing and the
symmetrical tie holes and joint pattern.
PHINMA PROPERTY HOLDING CORPORATION Tunnel Form Building System
The technology utilizing Otinord Tunnel Form Works to cast walls and slabs of
concrete structure in single operation which permits the realization of durable
monolithic structure that will satisfy the construction codes of countries situated in
seismic zones such as the Philippines.
Contact Person: Engr. Edgar Saavedra, President
20 N. Domingo Street, Brgy. Valencia, QC, 1112
T: 655-1111/655-7958/655-9164 loc. 805
Validity: April 22, 2013 to April 22, 2018
Contact Person: Mr. Willie J. Uy, CEO
Mr. George Richard F. Siton, VP for Operations
29 EDSA Mandaluyong City Manila
T: 533-777 loc 705 / 535-3462
Validity: September 8, 2015 to September 8, 2018
AITECH MANUAL 2017 Wall Panel Page 23
WALL PANEL
SRC INT’L PANEL SYSTEM, INC. SRC Panel
The Panel System is a wire space frame constructed similar to a truss, with a 39mm
thick expanded polystyrene (EPS) core. The faces of the three-dimensional wire
frame are wires with welded intersection spaced 50mm apart in both directions. The
wire fabrics are held 75mm apart by 2.3mm diameter spreader wires pierced
diagonally through the foam core and welded 50mm apart on every longitudinal wire
on both the wire fabrics in a staggered arrangement.
FAST WALL SYSTEMS PHILIPPINES, INC. Fast Wall Lightweight Concrete Panel
Fast wall panels are made of polystyrene beads mixed with cement and admixtures
sandwiched between two cement boards making it light but durable and fast to install.
It is best for both exterior and interior application for any kind of building structure. Its
weight is four times lighter than CHB but it is tough and durable and the installation is
faster. No special equipment is needed to install and manpower requirement is lesser.
The panels have smooth skin where no plastering is needed and only the joint are to
be treated. It is ready to paint and no need to apply neutralizer. The panel joints are
watertight, its surface are water repellent. With the presence of polystyrene beads,
good sound and thermal insulation can be achieved.
Contact Person: Myrna Montaos
Victoria Wave Special Economic Zone,
Brgy. 186 N. Caloocan
T: 939-5893 / 983-8106 to 08 / F: 983-7778
Validity: June 23, 2016 to June 23, 2019
Contact Person: Hak Choon Kim
302 Ortigas Ave. Ext., Bgy. Sto. Domingo, Cainta, Rizal
T: 656-0268 / 655-7955 / F: 656-3526
Validity: February 1, 2013 to February 1, 2018
AITECH MANUAL 2017 Wall Panel Page 24
JBC INNOTECH CORPORATION JBC Wall Panel
JBC Wall Panel is a permanent wall formworks system for external, internal or
partition walls composed of fiber cement board with EPS studs. The fiber cement
board is made up of hydral silicate, crystalline silica (quartz), cellulose fiber and water
steamed and cured in an autoclave at elevated temperature and pressure.
ARTY WORKS BUILDERS CORPORATION Arty Light Energy Saving Wall
Arty Light and Energy Saving composite wall material is one of a kind composite panel
which uses thin fiber cement or calcium silicate board as panels. The middle is filled
with an expanded shale high strength, lightweight composite core material to form a
non-load bearing inorganic composite sheet. The product has these characteristics;
solid, light weight, thin bodied, high strength capacity and impact resistance, hanging
strength heat insulation, sound insulation, fire-proof, waterproof easy cut.
NEXT CENTURY BUILDING SYSTEMS Emmedue Panel
Polystyrene Panels Sandwiched by 2.75mm G.I wire mesh and 3mm cross connecting wires. Used for internal and external wall partitions with load bearing properties and others such as acoustic and heat insulation, fire retardant, seismic resistant and rust free metals.
Contact Person: Mr. Jun Cabrera
U408, Antonio Ctr. Prime St, Madrigal Bus. Park II, Alabang
T: 659-0721 / M: 0919-5831335 / 0922-9019220
Validity: July 12, 2012 to July 12, 2017
Contact Person : Mr. Antonio Sy Chua, President
Ms. Jane Maxillum
Unit III Doña Anita Bldg, E. Rodriguez Avenue, Quezon City
T: 733-7767 or 69 / 239-1691 / M#0906-5584562
Validity: 08 September 2015 to 08 September 2018
Contact Person: Anna Kristina Cura
0811 The Infinity Tower, 26th St., BGC Taguig City
T: 556-0200
Validity: June 23, 2016 to June 23, 2019
AITECH MANUAL 2017 Wall Panel Page 25
UNION GALVASTEEL CORPORATION Duratherm Panel and Duratherm Roofing
Duratherm Panels are polyurethane sandwiched by galvanized steel. It is used for variety of applications, either for roofing, ceiling and walling. It provides very good insulation because of the rigid polyurethane foam which is a very good thermal insulator. Polyurethane foams are made up of tiny closed cells which contain gases that prevent transfer of heat and prevents moisture or air penetration. The average thickness of base metal for its skin panel is 0.45mm and the average thickness of top paint coating is 16.6 microns. Hence, the building stays cool thereby saving energy.
UGC’s Polyurethane Sandwich Panel
Duratherm Roofing
Light Metal Frames
Light Metal Framing systems can be used on ceiling framing and dry wall partitions
as it allows durability, flexibility and fast installation applicable in any type of building
construction.
Contact Person: Efren M. Delid
Chipeco Ave. Ext., Bgy. Real, Calamba City,Laguna
Contact No: 520-8830 to 32 loc. 104
Validity: July 2014 to 2017
Validity: February 1, 2013 to February 1, 2018
AITECH MANUAL 2017 Wall Panel Page 26
CAVITE FORM MODULES INC. JJM Wall Formtile
The JJM Wall Formtile is a new type of wall system that is very versatile in nature making possible various types of wall construction with relative ease, high quality finishes, speed in construction with less cost. Said walls system uses JJM’s versatile interlocking pre-cast concrete wall panels that are generally rectangular in shape with varying wall finishes ranging from plain, tiled, plank, colored, and many other decorative design.
TMPC CENTRAL CONST. & DEVELOPMENT TECHNOLOGIES Philkor Panel
Philkor is a housing panel which can be used as partitions sidings, ceilings, roofing
materials, walls, etc. and concrete hollow blocks. The panel has the following special
characteristics and features: 1) excellent thermal insulation 2) Junction type
independent structure with excellent durability 3) have variety of colors and available
patterns 4) Standard production.
MACRO INDUSTRIAL PACKAGING PRODUCTS CORPORATION Macro Air Sabs
Macro Air Sabs (MAS) is a composite building system that utilize Expanded
Polystyrene (EPS) as its core material for all structural members, walls, roof, floor that
is sprayed with composite coating made of precise blend of sand, cement, glass fiber
and other additives that together, create a structural wall system, slab, roof and other
parts of the building.
Contact Person : Atty. Nelson Clemente
10 Nery St., Remmanville Executive Village, Parañaque City
M: 0917-5344541
Validity: July 2014 to July 2017
Contact Person : Ms. Virginia Lumanog, SVP
Mr. Ariel N. Santos, VP Manufacturing
Airstrip Rd., Canlubang Ind. Estate, Calamba City Laguna
T: 844-8994 to 95 / M: 0917-7109988 / 0927-9125760
Validity: April 30, 2014 to April 30, 2017
Contact Person : Mr. Jaime Mendoza, Owner
3626 De Quiroz Compound Buhay na Tubig, Imus Cavite
T: (046) 875-1371 / M: 0920-9460551 / 0918-9256281
Email add: jjm_form@yahoo.com
Validity: June 16, 2015 to June 16, 2018
AITECH MANUAL 2017 Wall Panel Page 27
MDC CONQRETE INC. Precast Concrete
Precast concrete material system is a modern construction material that is better suit modular housing requirements. MDC's precast concrete is a precast wall and slab to be utilized in low cost housing to build huge volume of housing units in a short span of time at a low price but with high quality. These precast wall and slab system use standard reinforcing bars and high concrete strength for durability and performance of the structure. The use of precast concrete material have the following advantages: Cost Effective, Ease of Deployment and Speed of Construction.
EVOVENTUR INC. Evo Besta Board & Evo Autoclaved Lightweight Concrete (ALC) Panel
EVO Wall System, which maybe composed of EVO Besta Board with Autoclaved
Lighweight Concrete (ALC) as the infill materials, are established building materials
which are durable, sustainable amd multipurpose, and had been tried and tested in
different construction scenarios from all over the world. The EVO Besta Board is a
mineral based modern green building material that is versatile and outperforms
traditional products such as wood boards, gypsum, and cement based products. It
can be used as exterior and cladding and sheathing, decorative board and fencing. It
comes in various thickness with recessed edges profile.
GLOBAL GREEN HOUSING ASIA PHILIPPINES, INC. KOTO Integrated Building System
KOTO Integrated Building System comprises light weight panels which provide permanent formwork to reinforced concrete for column and beam construction of buildings. These light weight forms are used in a variety of ways from foundation, to
Contact Person: Teresita Ronquillo Galao
Brgy. San Felix, Sto. Tomas, Batangas
T: 717-5500
Validity: June 23, 2016 to June 23, 2017
Contact Person: Jaime Albert Santos
16A Maj. Dizon St., IVC Marikina
T: 681-5393
Validity: July 2014 to July 2017
AITECH MANUAL 2017 Wall Panel Page 28
Unified Building Code. Applied to socialized and economic housing it can produce
finished homes in a fraction of the time taken by conventional means.
VERLIN KONSTRUKT INC. Maxiwall System
The Maxiwall System is an innovative building system composed of 4.5mm thick
ficemboard with 2” x 3” metal furring and concrete fillers in between the wall with
reinforcement of 10mm making the structure more durable and stable in replacement
to the conventional CHB. In using the Maxiwall system, the week-long plastering will
be eliminated but with the same quality of work thereby reducing the construction
period of housing units. The concrete fillers between the boards improve the stability
and strength of the said partition.
JEA STEEL INDUSTRIES, INC.
JEA Light Steel Frames
JEA – Light Steel Frames are the different products of JEA Steel Industries, Inc. which are used as alternative materials for construction. The different products are JEA Span 45 Hat-Type Purlin, JEA Span C-Purlin, JHAMBA and Light Steel Frames for ceiling and partition, CMT-Tee Runners and J-Type runner. Said products are made-up of light gauge materials which are fast and simple to install, lightweight, termite proof, fire resistant and environmental friendly.
Contact Person : Mr. Joseph Alexander Uy
222 Ayala Tower 1, Ayala Ave., Makati City
M: 0917-5900965
Validity: July 2014 to July 2017
Contact Person: Engr. Ana-Lyn Tape, Project Manager
9F Obispado De Cubao Bldg., #41 Lantana St., Cubao Q.C.
T:721-2464/724-3316/F:724-3316/M:0922-8953281
Validity: November 18, 2014 to November 18, 2017
Contact Person : Mr. Reynaldo A. Monzon, Pres. & GM
Arch. Jasper Mortiga, Technical Manager
Lot 99 Kaligtasan Ext. cor. P. Samonte St. Quezon City
T: 442-2681 to 90 / 932-7210 loc. 350 / M: 0919-5989246
Validity: November 26, 2014 to November 26, 2017
Contact Person: Mr. Reynaldo A. Monzon, Pres./Gen. Man. Arch. Jasper Mortiga, Technical Manager T# 442-2681 to 90 / 932-7210 loc. 350 M# 0919-5989246 / 0925-5989246
AITECH MANUAL 2017 Wall Panel Page 29
LEXUS INDUSTRIAL ENTERPRISE CORPORATION PPS Building Technology
An advanced System for industrial building utilizing fabricated, post-tensioned
modular elements, this system has been in use since 1955 worldwide on mass
housing, multi-storey residential blocks projects and schools etc (2.5M square meters
of projects to date) the system is fast (5-7 days per floor); economical (20-30% less
materials used); cost effective (lighter structure more efficient foundation design plus
lower material consumption=lower cost); safe (designed for Zone 4 seismic zones;
Category 5 Super-typhoons of more than 24KMP wind.
Contact Person: Benjamin Go, Pres./CEO; Antonio Co, Dir.
#19 San Ignacio St., Bo. Kapitolyo, Pasig City
M: 09178866926
Validity: September 8, 2015 to September 8, 2018
AITECH MANUAL 2017 Floor and Roof Deck System Page 30
FLOOR AND ROOF DECK SYSTEM
JACKBILT INDUSTRIES, INC. Ribbed Slab System (Flooring)
Ribbed slab system is a system consisting of precast, pre-stressed half slabs with concrete up strands (rib) that are purposely designed to provide the necessary stiffness to the slab for handling, act as spacers for mesh reinforcement and to provide a positive tie between the precast element and in situ concrete topping to ensure a composite action between both. Its smooth soffit or slab bottom eliminates the need for drop ceiling and is ready for painting.
UNION GALVASTEEL CORPORATION Duradeck and Duraweb
Metal decking (Duradeck and Duraweb) floor structure allows durability and high strength, fast installation ideal for residential, commercial and industrial applications. The material is a continuous hot dipped galvanized steel.
Duradeck Duraweb
ARCHITECKS METAL SYSTEMS Concrete Floor Steel Decking
Architecks Metal Systems Inc. specializes in manufacturing and marketing of concrete floor decking. These are high tensile materials that provide strong reinforcements and permanent floor works for concrete slab to be used for residential, commercial and industrial structures. It saves manpower, materials, time and cost.
Contact Person: Efren M. Delid
Chipeco Ave. Ext., Bgy. Real, Calamba City, Laguna
T: 520-8830 to 32 loc. 104
Validity: February 1, 2013 to February 1, 2018
Contact Person: Mr. Cayetano P. Filart
21st PET Plans Tower Bldg, 444 EDSA, Guadalupe Viejo,
Makati City
T: 856-1922 / 846-2222 / F: 856-6598
Validity: November 18, 2014 to November 18, 2017
Contact Person: Mr. Juan T. Ng, President;
Claudette Enriquez, Marketing Development Officer
Unit 5A 5/F DN Corporate Ctr., Brgy. South Tri. 1388, QC
T:(02) 367-8335 / (02) 351-7760
Validity: September 8, 2015 to September 8, 2018
AITECH MANUAL 2017 Floor and Roof Deck System Page 31
UNITED STEEL TECHNOLOGY INTERNATIONAL CORP. Steeltech Pre-Painted G.I. Roofing
Steeltech products include colored roofing materials catering to residential and
industrial requirements. Imported raw materials and paints are used in producing coils
and tested vigorously comparable to international standards to assure high quality
products.
Steeltech Metal Decking
STEELTECH METAL DECKING is locally manufactured galvanized sheets integrated in formworks to speed up floor construction.
PHILMETAL PRODUCTS INC.
Spandek and Durawide Roofing System
Spandek and Durawide is a pre-painted rib type roofing system made from galvalume 55 substrate with double oven baked Polyester top coat paint, fixed firmly through the use of pierce fasteners, J-bolt anchor or a combination of both.
Contact Person: Mr. Lito Luna, Group Marketing Director
Philsteel Tower, 140 Amorsolo St., Makati City
T: 813-8382
Validity: June 23, 2016 to June 23, 2017
Contact Person: Ms. Paula Dulalia, Marketing Manager
12F BPI Binondo Rosario Bldg. 560 Quintin Paredes St.
Binondo Manila
T: 567-3668 to 79 / F: 567-3503 / M: 0917-5813760
Email add: info@steeltech.com.ph
Validity: June 16, 2015 to June 16, 2018
Validity Date: 09 October 2015 to 09 October 2018
AITECH MANUAL 2017 Floor and Roof Deck System Page 32
CONCRETE VENTURES GROUP, INC.
Precast Prestressed Concrete C-Joist
C-Joist is a precast, prestressed, concrete joist used as floor and roof slab system. It is a concrete product with pre-tensioned tendons as its reinforcement. Basically, a concrete joist supports a suspended flooring and form part as a slab system. C-Joist was laid on top of the beams with a minimum of 4 inches seating clearance on concrete beams and at least 3 inches bearing capacity for the steel I-beams. Reinforced Permanent Concrete Forms (PRF) was placed on top of the C-Joist shoulder in between distances. Panel bars on beams are required on shear connectors. It requires minimum of 2 inches concrete on top of C-Joist to a maximum of 3 inches structural slab. It is an alternative method from conventional wooden joist and helps to speed up construction.
Contact Person: Mr. Lito Luna, Group Marketing Director
Philsteel Tower, 140 Amorsolo St., Makati City
T: 813-8382
Validity: June 23, 2016 to June 23, 2017
AITECH MANUAL 2017 Septic Tank Page 33
SEPTIC TANK
STONEWORKS SPECIALIST INT’L CORP Fiberglass Septic Tank
Fiberglass Septic Tank has Two chambers: the decomposing chamber (anaerobic
section), and the filtering strainer. The design and construction is generally a
cylindrical body (straight type) with a totally closed bottom portion thus avoiding
fowling and poisoning of the soil. The design includes a filtering basket with a spacedly
arranged apertures, located at the wall segregating the digestion chamber and
bacterial filtration. Charcoal and limestone gravel are used as filtration media to filter
the sludge from the digestion chamber.
YOONNI GREENTECH CORPORATION Yoonni Septic Tank
Yoonni Septic Tank is recycled three chamber purifying septic tank made from LDPE
plastic. It is composed of a tank body having an associated cover mounted on the top
position. The cover has a vertically disposed vent while the tank has an inlet and outlet
post. The septic tank has a reinforcement consisting of lateral and longitudinal plastic
ribs making it durable and easy to install.
Contact Person: Mr. Jesus SJ. Felipe, President/COO
8358 Dr. A. Santos Ave. Sucat, Parañaque City
Contact No.: 046-4022893
Validity: November 11, 2013 to November 11, 2018
Contact Person : Mr. Soon Baek Seo,President;
Ms. Susana Lopez,Manager
Esguerra St. Longos, Pulilan, Bulacan
T: (044) 795-0807 / M: 0922-8325596 / 0917-8520535
Validity: January 8, 2014 to January 8, 2019
AITECH MANUAL 2017 Paint/Soil Stabilizer Page 34
PAINT
FIRST ASIAN BRIGHT STAR MARKETING CORP. Contractor Grade Flat White Latex–AB 500 & Premium White Flat Latex
Eggshell Finish are USA manufactured household paint suitable for exterior and
interior. It is water based, non-flammable, non-toxic, odorless and lead-free. The
p[aints are quick drying with stain resistant formulated and mildew resistant coating.
Flat latex has a coverage of 28.37 sq.m. per gallon.
SOIL STABILIZER
ISA GREENPATH ENTERPRISES, INC. Eco base 300 Soil Stabilizer
Eco base 300 Soil Stabilizer are liquid stabilizer designed to improve the
structure/integrity of road construction where soil becomes chemically bonded making
it harder and water resistant. The result is a road that exhibit high sheer strength to
improve soil bearing capacity that is weather-proof, easily workable and can be
compacted to a better particle cohesion by equipment and traffic.
Contact Person: Mr. Antonio Umali, Jr.
117 Champaca Street UPS 4, Parañaque City
T: 823-3724 / E: americancolors777@yahoo.com
Validity: May 9, 2012 to May 9, 2017
Contact Person: G. John Reyes
20 Fordham Street, St. Ignatius Village, QC
T: 736-6562 / TF: 913-1260 / M: 0915-8333049
Email Add: greenpathphil@yahoo.com
Validity: May 9, 2012 to May 9, 2017
AITECH MANUAL 2017 Fence Page 35
FENCE
VAZQUEZ BUILDING SYSTEMS CORP. Vazbilt Prefab Fences
Vazbilt Prefab Fences is a modular concrete fence system using interlocking wall
panels columns and tie beams designed with versatility that gives a warm, aesthetic
and clean appearance while providing strength and security well beyond CHB. With
finished texture on both sides, the tongue and groove system has a quick, clean and
efficient installation even during rainy days. Its assembly is clean unlike messy hollow
block laying and plastering.
Contact Person: Lilibeth Legasto
No. 1269 EDSA Balintawak, Quezon City
T: 363-4545 / 411-5400 / F: 361-4611
Validity: February 1, 2013 to February 1, 2018
AITECH MANUAL 2017 Wall Material Page 36
WALL MATERIAL
JAMES HARDIE PHILIPPINES
Hardieflex Sheets, Hardieflex Senepa & Pro
HardieFlex Sheets is a smooth, flat sheet which comes in a natural gray color that can be set to create a seamless look. HardieFlex Senepa is a smooth fascia board which comes in a variety of widths and lengths. HardieFlex Pro is a premium sanded and sealed HardieFlex sheet with dimensions designed specifically for the average toilet and bath size in the Philippines, to ensure less jointing and wastage.
SCG SMART BOARD SCG Smart Board
SCG Smart Board is a non-asbestos fiber cement board made of SCG Portland cement with silica, sand and cellulose fiber through autoclave process specially designed for various internal and external wall, ceiling and floor applications.
THE THAI OLYMPIC FIBER-CEMENT COMPANY, LTD. Fiber Cement Building Material
Fiber cement board composed of Portland cement, sand and cellulose fiber. Economic lifespan is 50 years.
Contact Person : Mr. Bobby Molina
Bgy. San Isidro, Cabuyao, Laguna
T: 895-2994 / M: 0918-8183958 / 0922-8783558
Email add: Bobby.Molina@jameshardie.com.ph
Validity: November 26, 2014 to November 26, 2017
Contact Person: Heherson B. Bala, Marketing Exec.
U903 9F Lot3 Blk.7, 3rd Ave.cor.31st St., BGC, Taguig
T: 501-8630/8635 /621-3060 M: 0917-8176461 / 717- 6900
Email add: hehersob@scg.co.th
Validity: June 16, 2015 to June 16, 2018
Contact Person: Mr. Isabelo Dingal, Sr Marketing Manager
Lvl.10-1 One Global Place 25th St. & 5th Ave, BGC, Taguig
T: 224-2088 / F: 224-2077 / M: 0906-2103646
E: billi_d@SHERAsolution.com / billi_dingal@yahoo.com
Validity: June 16, 2015 to June 16, 2018
AITECH MANUAL 2017 Wall Material Page 37
CENTRAL LUMBER CORPORATION GARDNER Fiber Cement
GARDNER fiber cement products are made with the latest German hatscheck
machine and technology. It is made from a combination of cellulose fiber, sand, and
premium quality Portland cement which are autoclaved to produce high quality,
durable fiber cement board, wood and PFC. As such Gardner products are strong,
does not shrink, and are impressively flexible. They are fire, water, moisture, weather,
termite, insect and rot resistant; does not contain asbestos and are environment
friendly.
TAGUMPAY IEM DEVT. INC. Fiber Cement EPS
It is made up of extruded polystyrene or expanded foam board core, covered on both sides with fiber cement board.
KNAUF GYPSUM PHILIPPINES INC. Knauf Gypsum Board
Knauf Gypsum Boards is manufactured from raw materials tested to the highest standard using state of the art technology. The high quality of Knauf Gypsum Boards permit its use in a wide range of residential, commercial and industrial applications typically in walls and ceilings. The basic gypsum board product uses Knauf specialist forming technology to produce a gypsum core sandwiched between high strength paper liners. Using Knauf technology the basic gypsum product can be modified to allow designers and architects to use Knauf Boards in fire resistant, water resistant,
Contact Person: Mr. Jeffrey Sinco, CEO, President
Bldg.3 Marcelo Compound, 67 Gov. Pascual St., Malabon
T: (02) 361-8933 / 361-9560
Validity: October 9, 2015 to October 9, 2018
Contact Person: Peter Lu, Managing Director
27/F BPI Corp. Centre, Buendia Makati City
T: 464-9202/464-9001
Validity: June 23, 2016 to June 23, 2017
AITECH MANUAL 2017 Wall Material Page 38
impact resistant and even X-Ray resistant applications. This is achieved using specific advanced additives to change the properties to the gypsum core.
BORAL PLASTERBOARD PHILIPPINES, INC USG Boral Standard Core Plasterboard
USG Boral Standard Core is suitable for both ceiling and wall apllication. It can be fixed to timber, metal framing and masonry construction, while providing an economical yet high quality finish to any interior projects. The technology has significant properties for durability and suitability. It is composed of gypsum plastercore encased in heavy duty face and backing liner. The product is environmentally friendly and non-hazardous to work with.
Contact Person: Wayne Studdon, General Manager-SEA
6/F Citibank Center Bldg., Paseo De Roxas, Makati
Validity: June 23, 2016 to June 23, 2017
Contact Person: Mr. James Lajom, Arch'l. Services
8 Mercury Avenue, Bagumbayan, Quezon City
T: 911-6709 M: 09178724101
Validity: June 23, 2016 to June 23, 2017
Recommended