View
212
Download
0
Category
Tags:
Preview:
Citation preview
A Better Foundation Alternative
DESIGNING METAL FOUNDATIONS
Shaner Industries | 724-266-1066
Shaner Industries’ Products
Patented Metal Foundation Designs
Proprietary Design Method Developed by engineers to consider numerous factors
in the design process
Patented and Proprietary Installation Methods Use various forms of hydraulic and vibratory equipment
to insert the foundations
Shaner Industries | 724-266-1066
Basic Foundation Design
•Top PlateTo mount a structure to the foundation
•Central Pipe Column
•FinsTwo – four steel fins are welded on the sides of the pipe
DESIGN: Determining Factors
Soil
•Geotechnical Report•Boring Logs/Plans•Blow Counts•Water Table Depth•Soil Type•Soil Resistivity/Aggressiveness or Corrosion Loss Rate
Shaner Industries | 724-266-1066
DESIGN: Determining Factors
Load / Forces
•Maximum load of the structure•Maximum Overturning Moment•Moment of Fatigue•Maximum Horizontal Shear•Maximum Lateral Deflection Rotation•Others: Maximum Torsional Moment, Up Force, Down Force
Shaner Industries | 724-266-1066
Standard Design Data
Shaner Industries | 724-266-1066
The following values are for reference only and represent the typical design loads applicable to a standard metal foundation design and installation method.
• Shear Force – 55 Kips• Axial Force Up – 50 Kips• Axial Force Down – 70 Kips• Torsional Moment – 300 Kip-ft• Overturning Moment – 3,000 Kip-ft
*In the event a higher value than those listed above and/or a restrictive condition of allowable deflection is required, our highly-trained engineers will custom design a steel foundation, with specific installation procedures and equipment, to meet your needs.
The Advantages of Shaner Industries’ Metal Foundations
Eliminates concrete (No curing or waiting period)
Delivers to jobsite ready to install eliminating large excavations
Installs instantly in any weather with minimal manpower / equipment
Minimizes restoration and clean up requirements
Reduces construction time, saving man hours, downtime & money
Costs less than concrete foundations
Provides a safer work zone
Can be removed and relocated if necessary, which often eliminates sales tax liability. (Check with your accountant or tax adviser for specifics.)
Shaner Industries | 724-266-1066
The Advantages of Shaner Industries’ Metal Foundations
Shaner Industries’ Steel Foundations are 100% recyclable
Environmentally friendly with NO dewatering
Reuses soil for backfill with no spoil to haul away
Perfect for remote locations where concrete is not practical or water is not readily available
Ideal for limited access and congested areas where down time is a concern
Pre-Engineered and tested by an independent testing group
High-tech coatings are available for protection in acidic soils
Designed for seismic conditions
Shaner Industries | 724-266-1066
930 Glenwood AvenueAmbridge, PA 15003
724-266-1066 www.shanerindustries.com
We look forward to working with you!
Shaner Industries | 724-266-1066
Recommended