A backpack tutorial lot of pictures | Lightfighter Tactical...

December 23, 2011 11:21 AM

Lightfighter Tactical Forum / Forums / Tactical Equipment / Roll Your Own / A backpack tutorial *lot of pictures*

A backpack tutorial *lot of pictures*

http://www.l ightf ighter.net/topic/a-backpack-tutorial- lot-of-pictures

Post approved by Eggroll.

A while ago, i made backpack tutorial for another forum. It seems that there are a lot of guys on lightfighter

as well, who are interested in making their own gear.. Also, some other guys who are not interested in

making gear, might be interested to know how the gear they use, is put together.

So here´s the tutorial (note that i simply just copy pasted the tutorial from the forum i originally posted it to)

"Ok, i have been asked to make a backpack tutorial. A while ago, I was “in between projects” and I finally

had the time to make one.

1.) I won´t go into details about measurements, etc.. I´m just showing you what kind of process it is to make

a backpack. This is such a big project that making a “Don´t use your own brains, just follow these steps and

you´ve got yourself a backpack”-tutorial would have taken ages to make. Maybe this will encourage more

people into making backpacks, especially the less experienced ones after they see that there really is no

greater mystery behind packs;

They are just like GP pouches, although bigger and they have shoulder straps.

2.) There are a lot of different pack designs. For this tutorial, I chose a simple, clamshell/panel loader type

of backpack (pretty much like ATS RAID or Cobra.. (This actually looks a LOT like Cobra). If you have never

made a backpack, I recommend you start from something simple like this.

3.) The techniques/methods i´ll show you, are not “the one and only way to do this or that”. This is just the

way how I make backpacks.

4.) I have left out certain details/phases, like how to sew Pals, how to box-x, and stuff like that.. I assume

that if someone is giving their first backpack project a go, they already know the basics of this craft.

5.) When i´m speaking about measurements, I use the metric system, so sorry about that guys in US.

6.) Do your best to keep the seam thickness into a minimum. For example, if you look at the pictures of the

finished pack closely, you will see that the zipper on the front panel which goes all the way down to the

seam and the loop of webbing for the srb´s of the upper compression straps, are on top of each other.

This is not the way to do it. It´s not the end of the world, but stil l, it adds to the thickness of the seam.

Ummm... Of course, i did that on purpose, just to make a point

No one ordered this pack from me, nor did I even have any need for a pack like this, so I made it only for

the tutorial. This is an E&E / Small day pack.

Like i said, it does look a lot like ATS Cobra, but that was pretty much inevitable, given the fact that my

goal was to make a small clamshell type pack. So the goal of this tutorial is not how to make an ATS Cobra

Let´s start.

A backpack tutorial *lot of pictures* | Lightfighter Tactical Forum http://www.lightfighter.net/printer-friendly-topic/a-backpack-tutorial-lo...

1 av 50 09.09.2015 11:37

A backpack consists from 4 parts;

Shoulder straps

Backpanel

The side/bottom piece

Front piece

And usually, that´s the order I start making a pack.

First; here´s how the end product should look like.

2 av 50 09.09.2015 11:37

3 av 50 09.09.2015 11:37

Let´s begin from shoulder straps.

There are a couple of ways to make these; The “inside out”-method, and the “sandwich the padding in

between bottom and top layer of the shoulder straps and bind around it”-method, which I used with this

pack. This method gives a pretty sharp looking result, but it requires you to have at least adequate binding

skills. I know from a bitter experience that bad binding can ruin a perfectly good project.

I stil l suck at binding curves, and my binding attachment doesn´t seem to help me with that, hence the

angles on both ends of the straps. Angled corners are a lot easier to bind than rounded corners (at least for

As this will be an E&E-type of pack, I didn´t use any spacer mesh/air mesh with it. Also, when I started

making packs, I thought that the thicker the padding is, the more comfortable it is to carry. That´s not the

case, of course. It´s more important to shape the shoulder straps correctly. Correctly shaped straps will

divide the weight evenly, and they are also less bulky, which is especially important if you are carrying the

pack while wearing body armor

4 av 50 09.09.2015 11:37

Start off from making a template for the straps. If you already have a pack which you find comfortable to

carry, make the template using the shape of it´s straps as a reference.

Cut the top and bottom layers using the template.

Tack down the webbing using hot glue, and sew the webbing in place (remember to box-x it from the both

5 av 50 09.09.2015 11:37

Cut the padding using your template. I used 4mm thick closed cell foam. (Like I said, this will be a small

pack, so that will do).

Use spray on adhesive in attaching the top layer and the bottom layer into it (not a necessity, but it helps

and I prefer it over hot glue)

6 av 50 09.09.2015 11:37

Apply the binding tape. I l ike to use Guterman´s fabric glue and a whole lot of paper clips to tack it in place.

After the glue has dried (it only takes a few minutes) it´s pretty easy to sew down the binding tape. If you

have vertical webbing/elastic in the straps like I have here, remember to double back over them, so they

will be triple stitched. For the binding tape, I used two lines of stitching, one close to the edge of the tape,

another one close to the edge of the strap.

7 av 50 09.09.2015 11:37

Box-x two pieces of 2” webbing into other end of the strap (the end which goes closer to the body of the

pack) The straps will be attached from these 2” webbing into the body.

8 av 50 09.09.2015 11:37

Make a template for the backpanel (same works with the front piece as well). Here´s what my template

looked like. It´s measures are Height: 44cm Width: 28cm. I used a 1 cm seam allowance, so the end

product is somewhere around 42cm/26cm

9 av 50 09.09.2015 11:37

For the outer layer, I used 1000d cordura, and for the inner layer, I used 500d cordura. Cut one each.

Hot glue and box-x the straps into the outer layer of the backpanel (the 1000d). After that, sew a 2”

webbing over the part where the straps attach to the backpanel (shown 2 pictures below)

10 av 50 09.09.2015 11:37

Hot glue the padding for the backpanel in place. After that, tack down the inner layer of the backpanel over

it (forgot to take a picture of that, sorry)

When you are cutting the padding for the backpanel, remember to cut it a lot smaller than the pieces of

cordura that make up the backpanel. I used the template to first cut the padding, then i cut an additional

2cm off from around it. If you don´t leave enough space in between the edge of the padding and the edge of

the cordura, it will come back and bite you in the ass eventually, when you start sewing the backpanel and

the side together.

11 av 50 09.09.2015 11:37

If you want to, you can now sew some ”airchannels” into the backpanel.. Whether they actually allow any

airflow is questionable, but they will help stiffen the backpanel, and give the pack a more finished look. You

can skip this part if you want to.

12 av 50 09.09.2015 11:37

Then we will make a pocket/sleeve for the frame sheet. In some commercially made packs, the pocket for

frame sheet is also meant to accommodate a hydration bladder. However, if you want to do that, you have

to add pleats into the pocket.. Otherwise, when you put a full bladder inside of it, the backpanel will bulge

out. Surprisingly, there are a lot of commercial packs where the frame sheet/hydration pocket is made

without pleats.

13 av 50 09.09.2015 11:37

Tack the frame sheet pocket in place using fabric glue. I also added some looplocks for tying down stuff

(the two on the top part of the pack are for TAD`s admin panel). That webbing+triglide combination is for

attaching a hydration bladder.

14 av 50 09.09.2015 11:37

Then we will attach the webbing which goes into the shoulder straps, into the backpanel. If you want to do it

properly, this is pretty much the only way to do it.

We will start out by making a triangle. Fold the long side of the triangle. Tack down the webbing. Fold the

other side of the triangle. Box-x the webbing. Then tack down the triangle+webbing combination into it´s

appropriate place.

15 av 50 09.09.2015 11:37

16 av 50 09.09.2015 11:37

Here´s how it should look like once finished:

17 av 50 09.09.2015 11:37

If you want to, add attachment points for the sternum strap (forgot to take a picture a picture, but I will see

them later on.

Now you can sew around the backpanel and it´s finished.

18 av 50 09.09.2015 11:37

Measure the dimensions for the side piece. This is a clamshell type of pack, so the zippers should go under

the pack.

19 av 50 09.09.2015 11:37

The length for the side piece for my pack was 110cm

Then we have to determine the width of the side piece. I wanted the other side to have a storm flap. Also, I

wanted the side which is attached to the backpanel, to have two columns of Pals.

The other side which attaches to the front piece, is much narrower

Then cut the side pieces

20 av 50 09.09.2015 11:37

21 av 50 09.09.2015 11:37

Tack down the zippers (#8 is a nice all around size) with hotglue or fabric glue.

22 av 50 09.09.2015 11:37

23 av 50 09.09.2015 11:37

The storm flap fold

24 av 50 09.09.2015 11:37

Sew the zippers in place. Use two lines of stitching (one line is too few, 3 lines is too many)

25 av 50 09.09.2015 11:37

26 av 50 09.09.2015 11:37

Hydration port: Sew a piece of Velcro, exactly in the middle of the side piece. Sew around it.

27 av 50 09.09.2015 11:37

Turn the side piece over, mark an X inside the box formed by the stiches. Then make additional markings

around the X like this;

28 av 50 09.09.2015 11:37

So basically, the middle lines mark where we have to cut through. The lines around it are a reference for

stitching.

Stitch around the outer lines like this:

29 av 50 09.09.2015 11:37

Cut an X in the middle of the X which is formed by the stitching, and you will a yourself a hydration port.

There are many way of doing the hydration ports, this is just one of them.

30 av 50 09.09.2015 11:37

31 av 50 09.09.2015 11:37

Carrying strap.

Cut a piece from 2” webbing (how long? it´s up to how large you want the handle to be)

Fold the webbing from the middle and sew over the folded area. Tack the carrying strap into it´s appropriate

place, and then box-x it.

32 av 50 09.09.2015 11:37

Sew down any pals webbing or what ever you want the side of the pack to have. Attach both sides with the

zippers Now the side piece is ready.

33 av 50 09.09.2015 11:37

Attach the side piece into the backpanel with paperclips to determine the measurements for the bottom

piece. With this pack that dimensions were width 20cm +2cm for folds and the height; 14,2 cm ( that´s how

wide the side piece is, with both sides of the zippers attached).

34 av 50 09.09.2015 11:37

Make the bottom piece. I usually give it two layers and sandwich the side piece in between them. Again,

outer layer from 1000d and the inner layer from 500d

35 av 50 09.09.2015 11:37

Attach the bottom piece into the side piece+backpanel combination with paper clips and mark the lines

where you have to sew the bottom and sides together.

36 av 50 09.09.2015 11:37

Sew any webbing you might want the bottom piece to have. Install a grommet if needed.

37 av 50 09.09.2015 11:37

38 av 50 09.09.2015 11:37

Tack down the side piece into the bottom piece. It´s now sandwiched in between the two layers of the

bottom piece. Sew. Again, 2 lines of stitching is the way to go.

Do the same for the other side

39 av 50 09.09.2015 11:37

Tack down the compression straps to the sides (4 in total)

40 av 50 09.09.2015 11:37

Attach the finished side piece into the finished backpanel with paper clips. See that it fits perfectly. It HAS

to to fit perfectly. If it doesn´t fit, it´s not too late to make adjustments.

41 av 50 09.09.2015 11:37

Sew the side piece into the backpanel. After first line of stitching, fold the sides over and inspect the seam

to make sure everything looks ok. If everything is ok, sew another line of stiches, Then apply the binding

tape (not shown here) and sew it in place (again, I used fabric glue to tack down the binding tape)

42 av 50 09.09.2015 11:37

43 av 50 09.09.2015 11:37

Attach the other ends of the compression straps, if you haven´t done it before

Here´s what it should look like before binding the seam.

44 av 50 09.09.2015 11:37

Make the front piece. Those two loops of webbing at 10 and 2 o´clock and those 3 looplocks at the bottom

are for attaching a beavertail, don´t mind them. I also made a zippered pocket into the front piece. Before I

sewed down the pals, veclro and the other stuff, I attached the front piece into the side piece+backpanel

combination with paperclips to make sure it fits perfectly.

45 av 50 09.09.2015 11:37

46 av 50 09.09.2015 11:37

Then make the inner side of the front piece. Now that Velcro backed admin pouches are in fashion (like

BFG dappers), I didn´t bother with making any organizing pockets, I just used long strips of velcro.

Tack the outer and inner layers of the front piece togerher, attach it to the side piece+backpanel

combination and sew the first line. Then turn the pack over and check the seams. If everything is ok, sew

the second line. Apply the binding tape, and you´re done.

47 av 50 09.09.2015 11:37

Here´s a finished pack with the beavertail on:

48 av 50 09.09.2015 11:37

And here´s how it rides on my back:

49 av 50 09.09.2015 11:37

I hope that some of you will find this useful.

50 av 50 09.09.2015 11:37

A backpack tutorial lot of pictures | Lightfighter Tactical...

Documents

updated 8/11/2020 - cdn.ymaws.com...Backpack 1 Backpack Skip Hop Harleysville PA Backpack 1 Backpack Triac Joey CMTJ-1000 Walnut Creek CA Backpack 1 Backpack Triac Sherwood Joey TJ

Backpack Program

Hydration backpack

Dog backpack

Canvas backpack, p.ku.vdsl laptop backpack, vintage canvas backpack,

BSASA loogo, trade dresse of CuCb Scouting and Boy Scoutu ... › web › BSA145 › attachment › ... · Tactical Flashlight, Set of Walkie-Talkies, Swiss Army Backpack) OR American

Bag BackPack Floral Fiesta Backpack

Backpack 1

jansport backpack

BACKPACK - res.cloudinary.com

Backpack motorised mist duster bm-100 - DoMyOwn.com Motorized Backpack Sprayer Brochure.… · Backpack motorised mist duster Backpack motorised mist duster bm-100 Tank capacity 16

Backpack Paintings

Backpack Awareness

backpack catalog

Backpack Project

OCW backpack

bACKpACK fUN

Backpack Catalogue3 - Twinlink · 2020. 10. 8. · BACKPACK BG 268N BACKPACK BC 279B Backpack Siæ: 30cm x 17.5cm x43cm Colour : BACKPACK BC 287B Checkered Backpack Siæ: 33cm x 12.5cm

Tech Backpack

Solar Backpack

A backpack tutorial *lot of pictures* | Lightfighter Tactical...

A backpack tutorial lot of pictures | Lightfighter Tactical...