View
217
Download
0
Category
Preview:
Citation preview
material
Die-cast
locking movements
180°
shackle diameter (mm)
suitable from 5 mm to 9 mm
fixing
screw
article no. 400E3004
material thickness up to 11 mm
fixing
horseshoe clip
article no. 400E3084
material thickness 1 mm or 4,5 mm
cam type
type B
fixing nut
Metal furniture
H4S.20 | Without lock
finish
nickel
logo
BURG, without logo
locking movements
90° right, 90° left
shackle diameter (mm)
suitable from 5 mm to 7 mm
fixing
nut
article no. 400E3004
material thickness up to 11 mm
fixing
horseshoe clip
article no. 400E3084
material thickness 1 mm or 4,5 mm
cam type
type B
fixing nut
Metal furniture
HDB.20 | Without lock
finish
nickel
logo
BURG, without logo
locking movements
90° right, 90° left
shackle diameter (mm)
suitable from 5 mm to 7 mm
fixing
nut
article no. 400E3004
material thickness up to 11 mm
fixing
horseshoe clip
article no. 400E3084
material thickness 1 mm or 4,5 mm
cam type
type B
fixing nut
Metal furniture
HDP.20 | Without lock
KEYSY is a brand of BURG-Group. | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@keysy.net | www.keysy.net
special details:
fixing hole: 16x19 mm
order advice:
packaging: carton (200 pcs)
advice:
cam type 1,
see list of accessories
drawings exemplary
finish chrome
logo neutral
locking movements 90° right
length (mm) 21
fixing nut
shackle diameter (mm) 6,5 up to 9
Metal furnitureVRB-0001 | Sashlock
KEYSY is a brand of BURG-Group. | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@keysy.net | www.keysy.net
special details:
fixing hole: 16x19 mm
order advice:
packaging: carton (200 pcs)
advice:
cam type 1,
see list of accessories
drawings exemplary
finish chrome
logo neutral
locking movements 90° right
length (mm) 21
fixing nut
shackle diameter (mm) 4 up to 6,3
Metal furnitureVRB-0002 | Sashlock
Wing Handle for PadlockScrew-in type
Page
1 - 132
Wing-Handle for padlockwith 90º rotation, Screw-intype, RH or LH application.
• Water- and dust-tightaccording to IP65.
• This Wing Handle consistsof two basic parts whichcan be combined to suityour application.
• On request cam can beassembled by DIRAK.
• A pre-assembled Wing Handle can be installed in the cutout.
• Padlock feature only when cam is at 90º tothe handle.
Material:
a)
• Wing Handle: completezinc die, chrome plated orblack coated
• Housing: zinc die, zinc plated
b)
• Cam: steel, zinc plated
D 25/05/04A 1/15/03
Part No. E-coated Textured Powdera) Wing Handle chrome plated black black
with plain/grounding/earthing nut
L = 18 (door thickness max. 8mm) 200-9364 200-9365 200-9365.TXL = 40 (door thickness max. 30mm) 100-9310 100-9311 100-9311.TX
b) One- two- or three point cams on page 1-100, 1-110 or 1-262
Optional:c) Assembling for right door, as drawn 200-0019
Assembling for left door 200-0020
Wing Handle s/s AISI 316 on page 7-085.
© copyright by DIRAK / Germany
Latc
hes
05.10
04/1
2/20
10©
cop
yrig
ht b
y D
IRA
K /
Ger
man
yD
IRA
K G
mbH
Kön
igsf
elde
r Str.
1 D
-582
56 E
nnep
etal
Phon
e:+4
9 (0
) 233
3.83
7-0
Fax
: +49
(0) 2
333.
837-
100
ww
w.di
rak.
com
1‑205 Compression‑Latch
Compession latch in two versions.• Cam can be positioned at 4x90°.• Version A: Install with rivets or screws.
Adjustable H dimension.• Version B: Install with rivets or screws.
Non adjustable cam.• All versions are lockable with padlock.
• Versions of Compression Latches with round housings, as drawn, however with 4 mounting holes as well as oval housings and 3 mounting holes on request.
Material:a), a1), c) and c1)
• Compression‑Latch:zinc die, black or zinc plated
• Shaft:steel, zinc platedb), b1) and d)
• Cams:steel, zinc plated
Latc
hes
05.11
04/1
2/20
10©
cop
yrig
ht b
y D
IRA
K /
Ger
man
yD
IRA
K G
mbH
Kön
igsf
elde
r Str.
1 D
-582
56 E
nnep
etal
Phon
e:+4
9 (0
) 233
3.83
7-0
Fax
: +49
(0) 2
333.
837-
100
ww
w.di
rak.
com
1‑205 Compression latch
Version A cam is adjustable see pagea) Compression‑Latch (zinc die, black) 200‑9935 200‑9936 200‑9937 200‑9938a1) Compression‑Latch (zinc die, zinc plated) 200‑9939 200‑9940 200‑9941 200‑9942
Door‑thickness Ts max. 50 / 1.969 70 / 2.756 90 / 3.543 110 / 4.331Frame size H 30‑60 50‑80 70‑100 90‑120
L in mm/inchb) Cam bent 45 / 1.772 200-5507-45 200-5507-45 200-5507-45 200-5507-45
Cam bent 60 / 2.362 *200-5507-60 *200-5507-60 *200-5507-60 *200-5507-60
b1)Cam straight 45 / 1.772 200-5508-45 200-5508-45 200-5508-45 200-5508-45Cam straight 60 / 2.362 *200-5508-60 *200-5508-60 *200-5508-60 *200-5508-60
Cam straight 65 / 2.559 200-5508-65 200-5508-65 200-5508-65 200-5508-65* Price and delivery time on request
Version B cam is not adjustablec) Compression‑Latch (zinc die, black) 200‑9916 200‑9918 200‑9920 200‑9922c1) Compression‑Latch (zinc die, zinc plated) 200‑9926 200‑9928 200‑9930 200‑9932
Door‑thickness Ts max. mm / inch 42 / 1.653 62 / 2.440 82 / 3.228 102 / 4.015d) Cam L=45mm
Part No. frame size H mm / inch200‑0404 32 / 1.260 52 / 2.047 72 / 2.835 92 / 3.622200‑0406 34 / 1.339 54 / 2.126 74 / 2.913 94 / 3.701200‑0408 36 / 1.417 56 / 2.205 76 / 2.992 96 / 3.780200‑0410 38 / 1.496 58 / 2.283 78 / 3.071 98 / 3.858200‑0413 41 / 1.614 61 / 2.402 81 / 3.189 101 / 3.976200‑0414 42 / 1.654 62 / 2.441 82 / 3.228 102 / 4.016200‑0416 44 / 1.732 64 / 2.520 84 / 3.307 104 / 4.094200‑0418 46 / 1.811 66 / 2.598 86 / 3.386 106 / 4.173200‑0420 48 / 1.890 68 / 2.677 88 / 3.465 108 / 4.252200‑0422 50 / 1.969 70 / 2.756 90 / 3.543 110 / 4.331200‑0424 52 / 2.047 72 / 2.835 92 / 3.622 112 / 4.409200‑0426 54 / 2.126 74 / 2.913 94 / 3.701 114 / 4.488
Additional cams 02.58, 02.61
Please order separately:Water‑ and dust‑tight according to IP65 by:
e) Flat external seal: 200‑0902The O‑Ring is already installed.
inch 1.181‑2.362 1.969‑3.150 3.756‑3.937 3.543‑4.724
Qua
rter-
Turn
02.42
04/1
2/20
10©
cop
yrig
ht b
y D
IRA
K /
Ger
man
yD
IRA
K G
mbH
Kön
igsf
elde
r Str.
1 D
-582
56 E
nnep
etal
Phon
e:+4
9 (0
) 233
3.83
7-0
Fax
: +49
(0) 2
333.
837-
100
ww
w.di
rak.
com
1-651 Quarter-Turn Pr20.1 L18
L-Wing-Handle for padlock.• For light applications.• For the standard cutout and additional
hole for the padlock eyelet.• The 2-point fixing prevents tempering.• RH and LH application.• The eyelet for the padlock, also used
as a stop, is asymmetric and can be turned for RH or LH doors (door closed).
• In closed position the wing handle is always fully vertical.
Material:• Housing, Stop and Wing Knob:
zinc die, black• Nut and Hex.screw:
steel• Internal wave washer:
steel, zinc plated
Part No. see pageL-Wing-Handle 281-9101.00-00000
Cam 02.61, 02.58
Optional:Water- and dust-tight according to IP65 by:O-Ring 200-1001.00-00000Flat external seal: 200-0904.00-00000Washer, PA natural 832-0125.00-00005
02.43
04/1
2/20
10©
cop
yrig
ht b
y D
IRA
K /
Ger
man
yD
IRA
K G
mbH
Kön
igsf
elde
r Str.
1 D
-582
56 E
nnep
etal
Phon
e:+4
9 (0
) 233
3.83
7-0
Fax
: +49
(0) 2
333.
837-
100
ww
w.di
rak.
com
1-125 Quarter-Turn with Combination Lock Pr20.1 L18
Quarter-Turn with Combination Lock• RH or LH application.• A pre-assembled Quarter-Turn can be
installed in the cutout.• O-Ring on handle improves grip.• Water- and dust-tight according to
IP65 DIN EN 60529.• For combination set or reset please
refer to enclosed instructions.• Modifying the combination just in
opened state possible.
Material:• Handle and housing:
zinc die, chrome plated or black coated
• Cam:steel, zinc plated
• O-Ring:NBR
zinc die, chrome plated
zinc die, black see page
a) Quarter-Turn (without cam) 100-9301 100-9302b) Cam 02.58
c) Assembling for right door 200-0019 200-0019Assembling for left door 200-0020 200-0020
BURG F.W. Lüling KG | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@burg.de | www.burg.de
outside dimension
20 x 20
shackle diameter (mm)
3,5
simultaneous locking
2
no. key combinations
50
Metal furniture
V-VF 400 E 20 | Padlock
BURG F.W. Lüling KG | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@burg.de | www.burg.de
outside dimension
30 x 30
shackle diameter (mm)
5
simultaneous locking
3
no. key combinations
228
Metal furniture
V-VF 400 E 30 | Padlock
BURG F.W. Lüling KG | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@burg.de | www.burg.de
outside dimension
40 x 40
shackle diameter (mm)
6
simultaneous locking
5
no. key combinations
2780
Metal furniture
V-VF 400 E 40 | Padlock
BURG F.W. Lüling KG | Hegestraße 6-16 | D-58300 Wetter (Germany) | Phone: +49-2335/6308-0 | Fax: +49-2335/6308-999 | info@burg.de | www.burg.de
outside dimension
50 x 50
shackle diameter (mm)
7
simultaneous locking
4
no. key combinations
2780
Metal furniture
V-VF 400 E 50 | Padlock
Recommended