View
3
Download
0
Category
Preview:
Citation preview
1
2. DC Output(12V/6A Max)
5. Power button/ Flashlight button
1. Jumping port
3. Type-C Input/Output(5V/3A Max)
4. USB Output 1 (QC 3.0)|USB Output 2(5V/2.1A)
6. Battery Indicator
7. Flashlight
At a Glance
2
Power Indicator Light DescriptionPress the Switch/Power button to check the battery level.
Recharging the jumper starterCharging with an AC adapter(AC adapter is not included)1.Connect the Type-C input port of the jump starter to the USB port of the wall charger through the Type-C cable included. 2. Plug the AC adapter into universal socket.
Charging Time:● 5v 1A charger takes 12.5 hours● 5v 2A charger takes 6.5 hours● 5v 3A charger takes 4 hours
During charging, the indicators flash cyclically and show real-time power. All lights will go out when it is fully charged or charging is paused.
Indicator
Battery Level
1 Flashing
0%
1 Solid
25%
2 Solid
50%
3 Solid
75%
4 Solid
100%
Car Jump Starter
AC Adapter
Type-C port
3
It is recommend to use above 5V 2A adapter like phone adapter to charge the jump starter.
2. Insert jumper cables into jumping port.
3. Connect red clamp to positive (-) terminal and black clamp to negative (-) terminal of the car battery.
1. Switch on your starter and make sure it s over 25% charged
4
4. Start your engine.
5. Remove clamps and pack away.
Instrution to connect to clamps
Battery life in good condition
5
Battery life in low condition
Manual Overload Button on the Clamps
Instruction of LED Indicator Light
Smart Battery Clamps
WARNINAG
6
Charging your phone or tabet
Connect the jump starter to your device via usb cable (Not included)
Short press power button
Using the Flashlight
7
Specifications
1. Hold to turn on
2. Press to toggle flash/turn off
8
Attention
Customer Service
Recommended