4. associated issues

Associated issues: Timber and Environmental Building

Atrium Roof to Deerubbin CentreWarwick Donnelly

Issues

1.Engineered timber products2.Waste 3.Building Rating Tools4.Environmental labelling systems

1. Engineered wood products

Products manufactured from timber fibres using gluing to produce large sections or long lengths–Glued strand products (OSB, LSL, ESL, …) –LVL - I beams–Box beams - Glulam–Plywood

Often used when large sections are not available. Efficient material use!

Portal frames under constructionPhoto: TRADAC

Benefits

• Engineered timber products, such as I-beams, glulam beams and plywood offer the builder/designer:– design flexibility– good environmental performance– increased structural ability

Design flexibility• Engineered wood

products can be manufactured to suit a specific design.

• The properties of the timber are optimised to suit the particular design.

Timber house of the Future

Environmental performance• Engineered wood products are made predominantly

from plantation timbers (mostly pine). Therefore:- • Carbon is sequestered in their use;• Low embodied energy;• Resource minimisation.

Carbon sequestered

Uses

• large cross-sections for large span beams or truss elements

• panel members - bracing, architectural

• curved or unusual shapes • large panel elements - floor,

roof, ceiling cladding (minor axis bending)

LVL

• Made by laminating thin (3 to 5 mm thick) sheets together to form long, deep sections.

• Most often used as beams• Often used where

appearance is not important or where long straight lengths are required.

Glulam• Made by laminating

sawn timber together to form deep sections with potential for manufacturing curved shapes

• Most often used as beams

• Often used where appearance is important or where interesting forms are needed.

House, Cairns, QldPhoto: Debbie Falck

Jarrah GL potash storage shed, Cape Cuvier, WAPhoto: Bunnings

Plywood• Made by laminating

thin (3 to 5 mm thick) sheets together to form sheets.

• Laminates have alternate directions for each layer

• High shear properties – suitable as bracing and webs

St Brigid ChapelSlavin Architects

I-beams• Timber/LVL flanges• Plywood /OSB webs• Lightweight• Suitable for uniformly

distributed loads on medium spans

• Design aids and information available from manufacturers

:

Box beams

• Timber/LVL flanges• Two plywood /OSB webs• Usually purpose built• Suitable for larger spans• Torsionally stiff• Can use decorative plywood• Used in portal frames Box beam with

LVL chords and plywood webs Photo: Geoff Boughton

Timber strand products• OSB (Oriented Strand Board)

– Thin sheets pressed from wafers of wood that are laid down and pressed to give panels

– can be used wherever plywood is used

• ESL (Engineered Strand Lumber)

– Similar process to OSB, but pressed into linear members to act as long or deep beams

– Can be used wherever LVL is used

Forestry Science Centre Uni of British Columbia, Canada

Photo: Gary Williams

OSBPhoto: Weyerhaeuser USA

2. Waste

•Waste is a serious environmental problem in the construction industry. A way to minimise waste is using the waste hierarchy:

Reduce, Reuse,

Recycle

Reduce!

• Using a lightweight timber construction option reduces the amount of material used to construct a dwelling in the first place;

• Timber frames and trusses can be pre-fabricated off-site and delivered, helping centralise and minimise waste at a factory;

• Careful planning and using waste management plans can minimise waste onsite;

Reuse!

• Off cuts can be reused on site as smaller components in timber framing;

Recycle!

• Any treated timber should be separated from untreated timber and disposed of separately;

• Timber waste can be recycled and used as a renewable energy source or as mulch.

3. Building rating tools

• There are various building rating tools designed to measure the environmental performance of buildings. These include:-

1. National Australian Built Environment Rating System, NABERS;

2. Nationwide House Energy Rating Scheme, NatHERS;

3. BASIX

National Australian Built Environment Rating System, NABERS

• NABERS is a flexible rating system, applicable to commercial development and homes, that rates existing buildings against environmental criteria including energy use, water use, air quality, storm water run off;

• It is a voluntary system that will enable building owners to increase their awareness of sustainability in the built environment;

• NABERS has been developed by the Australian Government.

Nationwide House Energy Rating Scheme, NatHERS

• AccuRate is a CSIRO developed tool that rates the design of a building in terms of how well they are designed to minimise energy use to maintain comfort, (thermal efficiency)

• AccuRate is a second generation thermal efficiency modelling software (update of the first generation software NatHERS);

• NatHERS is used in BASIX to rate the thermal efficiency component of energy consumption.

The Building Sustainability Index (BASIX)

• BASIX is a NSW Government initiative that ensures new homes are designed and built to use less potable water and use less energy.

• One aspect of energy reduction is increasing thermal efficiency.

BASIX• BASIX currently does

not consider embodied energy, only the thermal efficiency of the dwelling.

• Timber constructions can be made thermally efficient using an appropriate passive solar design.

Building rating systems

• All building rating systems have the aim of reducing the impact of a building on the environment;

• Building rating systems are now being incorporated into law. (eg BASIX in NSW)

4. Environmental labelling systems

• Forestry Certification schemes are run by third parties and aim to ensure that Forests are managed in an Ecologically Sustainable manner

• Timber sourced from a certified forest can be labelled by the certifying body

• The two main certifying bodies in Australia are Australian Forestry Standard Ltd (AFS) and the Forest Stewardship Council (FSC)

Certification internationally

• The two dominant international certification schemes are:– the Programme for endorsement of Forestry

Certification; previously - Pan European Forest Certification Scheme (PEFC) covering a volume of 5 157 003 ha or forests, &

– Forest Stewardship Council (FSC) Certification covering a volume of 535 509 ha of forest.

Certification schemes

• Once Chain of Custody can be established, (from sustainably managed forest to consumer) the certifying bodies will label timber at point of sale.

• This will allow builders to choose the environmentally sustainable option for building.

Conclusion

• Timber is an environmentally friendly material that offers the designer and builder flexibility in its use. An understanding of the properties and applications of timber will aid the designer and builder construct environmentally friendly buildings, and contribute to a sustainable built environment.