View
21
Download
0
Category
Preview:
Citation preview
Full data sheets with performance curves available for application selection
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 2
Global Leader
2020 | Issue 1 (effective 1/11/19)
TSURUMI PUMPS
Who is Tsurumi ? (pronounced Soo Roo Mee) Established in 1924, Tsurumi Pump are global leaders in submersibles and one of the
world’s most experienced pump manufacturers.
Through an extensive research and development programme, Tsurumi Pump has produced innovative improvements in submersible pump design.
Tsurumi’s Kyoto Plant is the world’s most modern submersible pump manufacturing plant - It has testing facilities to handle large pumps with outlet ports to 3 metres.
Tsurumi’s manufacturing capacity is over 1.4m units per year
Tsurumi offers an unbeatable range
over 1800 different models
Size range: 25 mm to 2250 mm
Power range: 0.15 kW to 300 kW
Flow range: 0.02 m3/min to 330 m3/min
Established dealer network in Europe, North and South America, Asia, Australia & parts of Africa.
Take a tour online …..Tsurumi’s factory walkthrough http://www.aussiepumps.com.au/tsurumi-submersible-pumps/
Vortex/Semi Vortex Impeller
This impeller allows passage of large or stringy solids carried in the water. It accelerates the water causing a vortex that assists the smooth transit of the solids in suspension.
Open-type Impeller
The semi-open impeller blade rotates about 0.5 mm above the wear plate and clears itself if solids settle.
Closed (Shrouded) Impeller
Produces high heads but has a limited ability to pass solids in suspension
Cutter Impeller
A “cutter mechanism” combines the action of a carbide blade, integrated into a single vane impeller, rotating against the serrated inner surface of a suction cover.
Channel Impeller
An impeller used in centrifugal pumps which allows passage of solids in the pumped liquid.
Single Channel impeller
Impeller passes large diameter foreign matter relative to the size of the discharge port.
Grinder Impeller
The grinder mechanism is made from hi chrome iron and is highly resistant to abrasion. Solids entering the pump are chopped into tiny pieces that then pass out through small diameter discharge pipes.
Impeller Features
Low volume, medium head, solids reduction
High volume, medium to high heads
Medium volume, high heads
Medium flows, medium heads
Large solids, medium heads, large flows
Large solids
Medium solids, medium heads & flows
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 3
Full data sheets with performance curves available for application selection
Global Leader
2020 | Issue 1 (effective 1/11/19)
CONTENTS
Contractor pumps
LB p6 HS p6 HSD p6
LSC p8 NK p9
KTV p10 KTVE p10 KTV SLURRY p10
KTZ p12 KTZE p12 KTD SLURRY p12
LH p14 LH-W p14 KRS p16
NKZ p18 GPN p19 GSZ/GSD p20
Industrial pumps
PU p24/25 TM p26 SFQ p27
U, UT, p28-29
B, BZ, NHB p32-33 C & NHC p34
MG p36-37
Water Treatment Equipment
Aerators & blowers p38
Screens P42
Skimmers p44
Who is Tsurumi ...................................................... .........................................................................................2
Impeller features .................................................... .........................................................................................2
Key features on Tsurumi Submersible Pumps ....... .........................................................................................4
1. Contractor Pumps
1.1 Single Phase
1.1.1 LB series ......................................... (Hire special) ................................................................... 5
1.1.2 HS / HSZ / HSD series .................... (Portable sand pumps) .............................................. 6/7
1.1.3 LSC ................................................. (Puddle suckers) ............................................................. 8
1.1.4 NK series ........................................ (High head) ..................................................................... 9
1.2 Three Phase (Dewatering & Slurry)
1.2.1 KTV / KTVE series .......................... (2 pole, light but tough) .......................................... 10/11
1.2.2 KTZ / KTZE / KTD series ................. (2 pole, cast iron, dirty water & slurry).................... 12/13
1.2.3 LH-W & LH series ........................... (2 pole, high head & high flow) .............................. 14/15
1.2.4 KRS series ...................................... (4 pole, high flow, dirty water & slurry) .................. 16/17
1.2.5 NKZ series ....................................... (4 pole, sand & mud) .................................................... 18
1.2.6 GPN series ..................................... (4 & 6 pole, sand & slurry) ............................................ 19
1.2.7 GSZ & GSD series ........................... (4 & 6 pole, dirty water & slurry) ............................ 20/21
1.2.8 1000v Mine pumps ........................ ...................................................................................... 22
1.2.9 Seawater kits ................................. ...................................................................................... 22
2. Industrial Submersible Pumps
2.1 VANCs series of Corrosion Resistant Pumps
2.1.1 PU series ........................................ (Corrosion resistant effluent ) ................................. 24/25
2.1.2 Marine Mate TM series ................ (Titanium salt water, chlorine, chemical pump ) .......... 26
2.2 Corrosion resistant pumps
2.2.1 SFQ series ...................................... (Genuine 316 cast stainless steel) ................................ 27
2.3 Sewage pumps
2.3.1 UT series ........................................ (Single phase, cast iron vortex septic tank pump) .........28
2.3.2 U series .......................................... (Sewage, manual & auto ) ............................................ 29
2.3.3 B series .......................................... (2 & 4 pole, channel impeller, sewage) ........................ 30
2.3.4 BZ series ........................................ (4 pole channel impeller, large solids) .......................... 31
2.3.5 NHB series ..................................... (NEW LOWER COST 4 pole channel impeller) ......... 32/33
2.3.6 C series .......................................... (Cutter pumps, manual & auto) .................................... 34
2.3.7 NHC series ..................................... (NEW HIGH HEAD, lower cost cutter pumps) ............... 35
2.3.8 MG series ....................................... (Grinder pumps, 2 pole high head) ......................... 36/37
3. Water Treatment Equipment
3.1 Aeration/Mixing equipment
3.1.1 TRN series ...................................... (Cost effective, efficient aerators) ................................ 38
3.1.2 BER series ...................................... (Ejector pumps) ............................................................ 39
3.1.3 RSR series ...................................... (Rotary air blowers) ...................................................... 40
3.1.4 RS series ........................................ (Rotary air blowers, water cooled) ............................... 41
3.2 Pre-treatment equipment
3.2.1 KE/KS series .................................... (Bar screens - front) ...................................................... 42
3.2.2 KW series ....................................... (Automatic bar screens) ............................................... 43
3.3 Scum skimmer ............................................. (FSP series) ................................................................... 44
3.4 Decanting pump .......................................... (FHP series) ................................................................... 44
4. Aussie GMP Industrial Pumps
4.1 Engine drive cast iron semi trash ................ 45
4.2 Electric cast iron semi trash ........................ 46
4.3 Electric cast iron high pressure .................. 47
4.4 Electric Bronze & stainless steel .................. 48
4.5 ATEX certified diesel fuel pumps ................. 49
4.6 Bare shaft cast iron, bronze & SS ................ 50/51
4.7 Hydraulic drive cast iron, bronze & SS ....... 52/53
5. Aussie High Pressure Blasters ........................ 56/57
Self priming pump selection guide ......... 54/55
Submersible Pump Troubleshooting Guide ....... ..................................................................56/57
General Terms of Sale ............................... 58
Full data sheets with performance curves available for application selection
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 4
Global Leader
2020 | Issue 1 (effective 1/11/19)
KEY FEATURES
5 times higher corrosion, wear & heat resistance than tungsten carbide … 5 times the life!
Check individual data sheets for full details on materials of construction
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 5
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
HIRE SPECIAL 1.1.1 LB SERIES … HIRE & CONSTRUCTION FAVOURITES
The LB series are single-phase, lightweight and compact dewatering pumps. Their compact design makes them easy to handle, simple to set up and they even fit into an 8" casing. These pumps are the top selling Tsurumi submersibles in North America and hire industry favourites.
The semi-vortex impeller maintains pump performance even when worn. The discharge port can be set vertically or horizontally to minimise folding or bending of the connected hose.
Discharge port 50mm with hose tail or NEW BSP fitting
Top discharge … slim line design means pump can fit into a 200mm pipe
Semi vortex/open type impeller (Urethane rubber)
Single phase, 240v, 50Hz
2 pole motors from 0.48 to 1.5 kW
Multidirectional hose coupling
Flow thru design cools pump
Oil resistant cable
Number 1 rental pump in USA
AUTO VERSION … NO FLOATS
The automatic model has a level control electrode with a timer function that eliminates excessive activation caused be agitated water. The pump will stop one minute after water-electrode contact is lost.
DIMENSIONS (MM) Hose tail version
Model d A A1 B B1 D W1 H
LB-480 50 233 162 286 228 187 50 -
LB-480A 50 233 162 286 228 187 115 -
LB-800 50 230 160 337 283 187 50 -
LB-800A 50 230 160 337 283 187 170 -
Applications
General dewatering
Construction sites dewatering
Draining wells
Draining basements or pits
Standard Accessories (hose tail version)
Hose coupling (1 pc)
Hose band (1 pc)
Optional accessories
Camlock coupling to suit BSP fitting QAL050A $15
LB-A automatic version
LB manual version
0 100 200 300 Capacity (L/min)
NO1. RENTAL PUMP IN USA
Discharge Port (mm) Model
S/code (with hose tail )
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price
Motor Output kW
NEW S/code (BSP version)
50 LB-480 TUC-LB-480P 0.48 2.9 single 11 225 capacitor 10.4 6 20 10 $451 TUC-LB-480PBSP
50 LB-800 TUC-LB-800P 0.75 5 single 15 310 capacitor 13.2 6 20 10 $558 TUC-LB-800PBSP
Automatic
50 LB-480A TUC-LB-480AP 0.48 2.9 single 11 225 capacitor 11.0 6 20 10 $525 TUC-LB-480ABSP
50 LB-800A TUC-LB-800AP 0.75 5 single 15 310 capacitor 13.8 6 20 10 $823 TUC-LB-800ABSP
5 great features ... 5 times the life!
Standard in every Tsurumi submersible
Anti-wicking cable entry
SiC mech seal … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
See data sheets for full specifications
SINGLE PHASE DEWATERING
Materials of Construction
Impeller Urethane rubber
Casing/Suction cover Ethylene propylene rubber
Motor frame Aluminium alloy casting
Shaft Stainless steel SUS403 (EN-XCr13)
EMC certified, ACMA registered
Replacement cables (10m)
s/code List price
TS-00100811 $116
Manual (LB) Auto (LB-A)
Do not operate pump below C.W.L (continuous running water level)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 6
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
PLUMBERS 1.1.2 HS (HSD) SERIES … AUSSIE PIT BOSS
DIRTY WATER … HS(Z) SERIES
The HS series are single-phase, portable dewatering submersible pumps. They have a spiral pump casing that allows sand and silt-laden water to pass easily through the pump.
The shaft mounted agitator prevents "Air Lock" and stirs the mixture allowing the sediment to be removed.
Discharge port 50mm
Side discharge
Semi-vortex impeller (Urethane rubber for abrasion resistance)
Single phase, 2 pole motors 0.4 to 0.75kW
Spiral design to pass sand and silt
Shaft mounted agitator suspends solids
Auto operation with float switch (option) … prevents dry running, saves energy & extends pump life
Simple to disassemble
Oil resistant cable
Aluminium alloy motor housing
Applications
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Standard Accessories
Hose coupling (1 pc)
Hose band (1 pc)
Optional accessories
Camlock coupling to suit BSP fitting QAL050F $14
0 100 200 Capacity (L/min)
SLURRY VERSION … HSD & HSDZ SERIES … $628
The HSD is a semi-vortex, portable slurry pump driven by a single-phase motor. The HSDZ is the auto version with float control.
The impeller and agitator are made of hi chrome for longer wear life when the pump handles abrasive liquids.
Cast iron pump casing
Discharge port 50mm
Side discharge
Semi vortex impeller (Hi chrome iron )
Single phase, 2 pole motor, 0.55kW
Hi chrome agitator that assists smooth suction of settled material
Poly vinyl strainer stand … handles solids up to 10mm
Applications
Draining sand-carrying water
Draining, transferring, or mixing slurry
Standard Accessories
Hose coupling (1 pc)
Hose band (1 pc)
HS manual version
HSZ automatic version
HSD slurry version
SINGLE PHASE SAND PUMPS
Materials of Construction
Impeller Urethane rubber
Casing Ductile iron FCD700 (EN-GJS-700-2)
Strainer stand PVC
Motor frame Aluminium alloy casting
Shaft Stainless steel SUS403 (EN-XCr13)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 7
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.1.2 HS (HSD) SERIES … AUSSIE PIT BOSS CONTINUED
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A
Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price
50 HS2.4S TUC-HS2.4SP 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 $419
50 HS2.75S TUC-HS2.75SP 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 $537
AUTO VERSION … HSZ
50 HSZ2.4S TUC-HSZ2.4SP 0.4 2.6 single 12.2 207 capacitor 11.3 7 20 10 $475
50 HSZ2.75S TUC-HSZ2.75SP 0.75 4.6 single 18 300 capacitor 18.2 7 20 10 $583
SLURRY VERSION .. HSD (manual) & HSDZ (auto)
50 HSD2.55S TUC-HSD2.55SP 0.55 7.2 single 13.2 220 capacitor 15.0 10 20 10 $628
NEW 50 HSDZ2.55S TUC-HSDZ2.55S 0.55 7.2 single 13.2 220 capacitor 15.0 10 20 10 $682
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
HS2.4S 50 240 207 158 84 185 328 90
HS2.75S 50 285 233 217 109 184 388 90
Do not operate pump below C.W.L (continuous running water level)
STANDARD SLURRY - HSD
Used extensively in batch plants
5 great features ... 5 times the life!
Standard in every Tsurumi HS (HSD) submersible
Anti-wicking cable entry
SiC mech seal … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
See data sheets for full specifications
SINGLE PHASE SAND PUMPS PLUMBERS
Hose dia Length S/code
50mm 20m QLFH50BL020F $137
Discharge Hose … Blue Lay Flat Hose fitted with
▪ Type C female Camlock
▪ Type E male Camlock
2” Male Camlock to fit to pump sold separately … QAL050F $15
EMC certified, ACMA registered
Replacement cables (10m)
Type s/code List price
Manual TS-00100811 $116
Auto TS-00100813 $161
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 8
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Do not operate pump below C.W.L (continuous running water level)
0 100 200 Capacity (L/min)
1.1.3 LSC RESIDUE PUMP
Applications
Complete drainage of flat surfaces
Rooftops, parking lots, utility pits, basements, plant maintenance, pools
Standard Accessories LSC (hose tail version)...
Hose coupling (1 pc)
25mm hose band coupling with union hose band (1 set)
LSP …
25mm hose band coupling with union hose band (1 set)
Suction hose with union (5m) (1 set)
Suction attachment (1 pc)
The LSC pump is a portable, single-phase residue
dewatering pump. Tsurumi’s unique sealing device makes
the pump capable of pumping down to floor level.
The rubber-lined base plate prevents scratching to floor
surface and the discharge direction is selectable between
vertical and horizontal. This prevents folding or bending of
the discharge hose.
Discharge port 25mm (hose tail, optional BSP fitting)
Top discharge … slimline design enables pump to be used in narrow locations
Semi vortex impeller (Urethane rubber)
Single phase, 2 pole motor, 0.48kW
Check valves prevent back flow
Flow thru design cools pump at low water levels
Rubber lined base plate
Minimum water level of 1mm … unique to Tsurumi
Oil resistant cable
Discharge Port (mm) Model
S/code (with hose tail )
Motor Output kW
Rated Current A
Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price
25 LSC1.4S TUC-LSC1.4SP 0.48 6.2 single 11 170 capacitor 12 6 20 5 $516
25 LSP1.4S TUC-LSP1.4SP 0.48 6.2 Single 7 55 Capacitor 16.5 6 20 5 $1,269
LSC1.4S
LSC1.4S
5 great features ... 5 times the life!
Standard in every Tsurumi LSC submersible
Anti-wicking cable entry
SiC mech seal … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
See data sheets for full specifications
LSP1.4S
HIRE/PLUMBERS PUDDLE SUCKERS
Materials of Construction
Impeller Urethane rubber
Casing Ethylene propylene rubber
Suction cover Steel plate & Urethane rubber
Motor frame Aluminium die casting
Shaft Stainless steel SUS403 (EN-XCr13)
EMC certified, ACMA registered
Replacement cables (10m)
s/code List price
TS-00100811 $116
1” BSP outlet
TS-03200029 $28
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 9
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.1.4 NK SERIES
The NK-series is a KTV-based single-phase dewatering pump with high head performance. The side-flow, top-discharge design assures efficient motor cooling even when it operates at low water levels.
Semi-vortex pump design is adopted for maximum durability and maintaining pump performance.
The pump has a built-in starting capacitor.
Discharge port 80mm
Top discharge … slimline design means pump can fit into narrow locations
Semi-vortex impeller (ductile cast iron)
Single phase, 2 pole 2.2kW motor, NOTE: 15 amp plug required
2” hose tail fitting standard, 3” BSP outlet optional (TS-03200074 … $408)
Side flow design to cool motor
Internal starting capacitor
Simple to disassemble
Oil resistant cable
Applications:
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Standard Accessories:
Hose coupling (1 pc)
Discharge Port (mm)
Model S/code
Motor Output kW
Rated Current A
Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price
50 NK4-22 TUC-NK4-22P 2.2 14.5 single 24 525 capacitor 29 6 50 8 $2,218
DIMENSIONS (MM)
Model d A A1 B D H W1
NK4-22 80 240 187 555 240 673 80
5 great features ... 5 times the life!
Standard in every Tsurumi NK submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
SINGLE PHASE HIGH HEAD HIRE/CONSTRUCTION
24M MAX HEAD
Materials of Construction
Impeller Ductile iron FCD700 (EN-GJS-700-2)
Pump casing Polypropylene/polyethylene
Motor frame Aluminium alloy casting
Shaft SUS403 (EN-XCr13)
Shown with optional 3” BSP fitting
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 10
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 400 800 Capacity (L/min)
Applications
Draining sand laden water
Draining slurry in cement plants, quarries or mines
Pumping sediments
Standard Accessories
Hose coupling (1 pc)
1.2.1 KTV SERIES
DIRTY WATER … KTV
The KTV series are compact, three-phase dewatering pumps. Made from aluminium and synthetic rubber, these are the lightest in Tsurumi’s 3-phase, dewatering pump range.
The semi-vortex impeller minimizes blockages. The strainer is easily removed for access during maintenance.
Top discharge port 50mm - 80mm
Side flow design cools motor at low water levels
Semi-vortex impeller (Synthetic rubber coated ductile cast iron)
Three phase, 2 pole motors from 0.75 to 5.5kW
Lightweight construction, high strength aluminium
Applications
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Standard Accessories
Cabtyre cable (1 pc)
Hose coupling (1 pc)
Hose band (0.75kW only/ 1 pc)
Options
Extended cable
Special paint
AUTO VERSION … NO FLOATS
The KTVE series are equipped with electrode control sensors for automatic operation.
Pump operation starts when the water level rises and contacts the electrode. A timer function eliminates excessive activations caused by agitated water. The pump will operate for a further minute after the water-electrode contact is lost.
The electrode relay eliminates dry-running, reduces power consumption and extends operating life.
SLURRY VERSION With all the features of the standard KTV series, these lightweight, portable slurry pumps are equipped with a cast iron agitators that ensure smooth suction of the settled matters.
The impeller is made of high-chromium cast iron for extra durability.
Discharge port 50 - 80mm
Top discharge makes pump suitable for narrow spaces
Semi vortex impeller (Chromium - durable & corrosion resistant)
Pumped water cools motor so pump can operate at low water levels
Rubber suction cover for abrasion resistance
For online demo search Tsurumi KTV pump or click You Tube image
0 400 800 Capacity (L/min)
Level control electrode
KTVE automatic version
KTV slurry version
1000 volt options … p22
HIRE/CONSTRUCTION 3 PHASE , 2 POLE, LIGHTWEIGHT & TOUGH
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 11
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Do not operate pump below C.W.L (continuous running water level)
5 great features ... 5 times the life!
Standard in every Tsurumi KTV submersible
Anti-wicking cable entry
SiC mech seal … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
See data sheets for full specifications
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
KTV2-8 50 200 155 353 281 200 369 65
KTV2-15 50 240 187 392 310 240 396 80
KTV2-22 50 240 187 412 330 240 416 80
KTV2-37 80 285 211 510 387 285 510 90
KTV3-55 80 300 229 545 422 300 545 90
AUTO VERSION
KTVE2.75 50 200 155 401 329 200 417 234
KTVE21.5 50 240 187 462 380 240 426 266
KTVE22.2 50 240 187 462 380 240 426 266
KTVE33.7 80 285 210 585 462 285 585 327
SLURRY VERSION
KTV2-50 50 250 192 450 368 250 454 120
KTV2-80 80 295 211 550 427 295 550 130
1.2.1 KTV SERIES CONTINUED
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m List Price
50 KTV2-8 TUC-KTV2-8 0.75 1.8 3-phase 15 320 d.o.l. 11.5 6 20 5 $1,457
50 KTV2-15 TUC-KTV2-15 1.5 3.3 3-phase 20 420 d.o.l. 20.5 8.5 50 8 $2,265
50 KTV2-22 TUC-KTV2-22 2.2 4.3 3-phase 24 525 d.o.l. 23.0 8.5 50 8 $2,489
80 KTV2-37 TUC-KTV2-37 3.7 7.4 3-phase 26.5 830 d.o.l. 36.0 8.5 50 8 $3,493
80 KTV3-55 TUC-KTV3-55 5.5 11 3-phase 35 980 d.o.l. 46.5 8.5 50 8 $4,117
AUTO VERSION
50 KTVE2.75 TUC-KTVE2.75 0.75 1.8 3-phase 15 320 d.o.l. 12.7 6 20 5 $2,396
50 KTVE21.5 TUC-KTVE21.5 1.5 3.3 3-phase 20 420 d.o.l. 21.5 8.5 50 8 $3,230
50 KTVE22.2 TUC-KTVE22.2 2.2 4.3 3-phase 24 525 d.o.l. 24.5 8.5 50 8 $3,481
80 KTVE33.7 TUC-KTVE33.7 3.7 7.4 3-phase 26.5 830 d.o.l. 39.5 8.5 50 8 $5,059
SLURRY VERSION
50 KTV2-50 TUC-KTV2-50 2 3.8 3-phase 20 420 d.o.l. 25.0 10 50 8 $3,101
80 KTV2-80 TUC-KTV2-80 3 6.1 3-phase 22.5 720 d.o.l. 38.0 10 50 8 $3,752
STANDARD AUTO SLURRY
1,000 volt option available … p22
3 PHASE , 2 POLE, LIGHTWEIGHT & TOUGH HIRE/CONSTRUCTION
Materials of Construction
Impeller Ductile iron casting/ Urethane rubber
Pump casing Synthetic rubber
Motor frame Aluminium alloy casting
Shaft SUS420J2 (EN-X30Cr13)/ SUS403 (EN-XCr13)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 12
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 500 1000 Capacity (L/min)
0 1000 2000 3000 Capacity (L/min)
DIRTY WATER … KTZ
The KTZ series are three-phase, cast iron, high head dewatering pumps.
The mechanical seal’s resistance to high pressure mean the pumps can be installed to a maximum submersion depth of 50m.
Discharge port 50 - 150mm
Top discharge … Slimline design means pump can fit into narrow locations
Semi open type impeller (Hi chrome iron)
Three phase, 2 pole motors from 1.5 to 15kW
Side flow design to cool motor
Simple to disassemble
Multi-directional discharge port
Now with hose tail connectors, BSP thread options
Applications
Mine dewatering
General dewatering
Recycling water in concrete batch plants
Draining wells
Draining basements or pits
Stormwater dewatering
Water harvesting
Standard Accessories
Cabtyre cable (1 pc)
Hose coupling (1 pc) Options
Extended cable
Seawater resistant adaptor kit
1.2.2 KTZ (KTD) SERIES
NO. 1 DEWATERING / BATCH PLANT PUMP
AUTO VERSION
The KTZE series are equipped with electrode control sensors for automatic operation.
Pump operation starts when the water level rises and contacts the electrode. A timer function eliminates excessive activations caused by agitated water. The pump will operate for a further minute after the water-electrode contact is lost.
The electrode eliminates dry-running, reduces power consumption and extends operating life.
SLURRY VERSION … KTD SERIES The KTD series are cast iron, heavy duty slurry pumps based on the KTZ series. An agitator assists the smooth of suction solids in suspension.
Discharge port 50 - 80mm
Top discharge … Slimline design means pump can fit into narrow locations
Semi open type impeller
Hi chrome iron impeller & agitator, for durability & corrosion resistance
Three phase, 2 pole motors from 2 to 3kW
Applications
Draining or transferring
bentonite slurry
Draining or transferring slurry
Draining slurry mixed water
Concrete batch plants
Standard Accessories
Hose coupling (1 pc)
Hose band (1 pc)
Level control electrode
KTZE automatic version
KTD slurry version
QUARRY/MINING/CONSTRUCTION/CONCRETE
3 PHASE, 2 POLE, CAST IRON DIRTY WATER & SLURRY
1000 volt options … p22
0 400 800 Capacity (L/min)
Materials of Construction (cast iron version)
Impeller Chromium iron casting
Pump casing Grey iron casting
Suction cover Ductile iron casting
Motor frame Grey iron casting
Shaft SUS420J2 (EN-X30Cr13)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 13
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.2 KTZ (KTD) SERIES CONTINUED
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
KTZ21.5 50 235 173 509 401 216 478 120
KTZ31.5 80 235 173 509 401 216 478 120
KTZ22.2 50 235 173 529 421 216 498 120
KTZ32.2 80 235 173 529 421 216 498 120
KTZ23.7 50 283 208 615 492 252 625 150
KTZ33.7 80 283 208 615 492 252 625 150
KTZ43.7 100 283 208 630 492 252 625 150
KTZ35.5 80 306 218 671 548 259 688 150
KTZ45.5 100 306 218 686 548 259 688 150
KTZ47.5 100 330 240 764 626 314 687 190
KTZ67.5 150 330 240 799 626 314 687 190
KTZ411 100 373 260 806 645 350 740 190
KTZ415 100 428 260 374 934 350 810 190
KTZ611 150 373 260 826 645 350 740 190
KTZ615 150 457 260 374 954 350 810 190
AUTO VERSION
KTZE21.5 50 270 173 235 623 216 628 345
KTZE22.2 50 270 173 235 643 216 648 355
KTZE23.7 50 342 213 283 755 252 717 435
KTZE31.5 80 276 173 235 623 216 628 345
KTZE32.2 80 276 173 235 643 216 648 355
KTZE33.7 80 347 213 283 755 252 717 435
KTZE43.7 100 367 213 283 770 252 717 435
SLURRY VERSION
KTD22.0 50 235 173 550 442 221 519 140
KTD33.0 80 297 222 644 521 266 654 160
Do not operate pump below C.W.L (continuous running water level)
Hose tails (for non multidirectional pumps)… self fit
Models suited Hose tail List
KTZ22.1, KTZ22.2 TS-03211117 $35 2”
KTZ23.7 TS-03215119 $67
3” KTZ31.5, KTZ32.2 TS-03211612 $56
KTZ33.7, KTZ35.5 TS-03211827 $63
4” KTZ43.7, KTZ45.5 TS-03212729 $ 67
KTZ411 TS-03229516 $170
6” KTZ67.5 TS-03215210 $196
KTZ611 TS-03229617 $248
Tsurumi seawater kit available … p 22 1,000 volt option available …. p22 Used extensively in batch plants
Angled Hose & BSP tails (multidirectional pumps, version 53)… self fit
Models suited BSP tail List Hose tail List
KTZ22.1, KTZ22.2 TS-03200085 $112 2”
TS-03200078 $35
KTZ23.7 TS-03200089 $262 TS-03200082 $115
3” KTZ31.5, KTZ32.2 TS-03200087 $292 TS-03200079 $117
KTZ33.7, KTZ35.5 TS-03200091 $315 TS-03200083 $119
4” KTZ43.7, KTZ45.5 TS-03200093 $331 TS-03200080 $131
KTZ411 TS-03200099 $331 TS-03200098 $331
6” KTZ67.5 TS-03200096 $644 TS-03200095 $212
KTZ611 TS-03200102 $395 TS-03200101 $395
5 great features ... 5 times the life! Standard in every Tsurumi KTZ submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price
50 KTZ21.5 TUC-KTZ21.5 1.5 3.5 3-phase 21.5 430 d.o.l. 30 8.5 50 8 $1,796
80 KTZ31.5 TUC-KTZ31.5 1.5 3.5 3-phase 14.4 670 d.o.l. 30 8.5 50 8 $1,796
50 KTZ22.2 TUC-KTZ22.2 2.2 5 3-phase 26 500 d.o.l. 34 8.5 50 8 $1,920
80 KTZ32.2 TUC-KTZ32.2 2.2 5 3-phase 20.4 800 d.o.l. 34 8.5 50 8 $1,920
50 KTZ23.7 TUC-KTZ23.7 3.7 7.7 3-phase 36.5 450 d.o.l. 60 8.5 50 8 $3,081
80 KTZ33.7 TUC-KTZ33.7 3.7 7.7 3-phase 29 900 d.o.l. 60 8.5 50 8 $3,081
100 KTZ43.7 TUC-KTZ43.7 3.7 7.7 3-phase 18 1,440 d.o.l. 60 8.5 50 8 $3,081
80 KTZ35.5 TUC-KTZ35.5 5.5 11.4 3-phase 32 1,100 d.o.l. 74 8.5 50 8 $4,435
100 KTZ45.5 TUC-KTZ45.5 5.5 11.4 3-phase 22.5 1,750 d.o.l. 74 8.5 50 8 $4,435
100 KTZ47.5 TUC-KTZ47.5 7.5 15 3-phase 40 1,400 d.o.l. 101 12 50 8 $5,984
150 KTZ67.5 TUC-KTZ67.5 7.5 15 3-phase 31 2,040 d.o.l. 100 20 50 8 $6,194
100 KTZ411 TUC-KTZ411 11 22 3-phase 48.5 1,440 d.o.l. 130 12 50 8 $7,386
NEW 100 KTZ415 TUC-KTZ415 15 22 3-phase 55 1,950 d.o.l. 146 12 50 8 $8,236
150 KTZ611 TUC-KTZ611 11 22 3-phase 32.5 2,440 d.o.l. 131 20 50 8 $7,386
NEW 150 KTZ615 TUC-KTZ615 15 27.4 3-phase 40 2,750 d.o.l. 147 20 50 8 $8,236
AUTO VERSION
50 KTZE21.5 TUC-KTZE21.5 1.5 3.5 3-phase 21 450 d.o.l. 39 8.5 50 8 $2,280
50 KTZE22.2 TUC-KTZE22.2 2.2 5.0 3-phase 26 500 d.o.l. 41 8.5 50 8 $2,401
50 KTZE23.7 TUC-KTZE23.7 3.7 7.5 3-phase 37 450 d.o.l. 69 8.5 50 8 $3,830
80 KTZE31.5 TUC-KTZE31.5 1.5 3.5 3-phase 14 680 d.o.l. 38 8.5 50 8 $2,280
80 KTZE32.2 TUC-KTZE32.2 2.2 5.0 3-phase 20 800 d.o.l. 40 8.5 50 8 $2,401
80 KTZE33.7 TUC-KTZE33.7 3.7 7.5 3-phase 29 900 d.o.l. 69 8.5 50 8 $3,830
100 KTZE43.7 TUC-KTZE43.7 3.7 7.5 3-phase 18 1420 d.o.l. 69 8.5 50 8 $3,830
SLURRY VERSION … KTD SERIES
50 KTD22.0 TUC-KTD22.0 2 4.5 3 phase 20 500 d.o.l. 38 10 8 $3,023
80 KTD33.0 TUC-KTD33.0 3 6.5 3 phase 22 800 d.o.l. 65 10 8 $3,543
3 PHASE, 2 POLE, CAST IRON DIRTY WATER & SLURRY
QUARRY/MINING/CONSTRUCTION/CONCRETE
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 14
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 2000 4000 6000 Capacity (L/min)
45kW - 110kW
1.2.3 LH (LH-W) SERIES
Applications
Mine dewatering
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Water harvesting
Standard Accessories
Cabtyre cable 1 pc (2 pcs for 90 kW version or up)
Discharge pipe 1 pc (on JIS10K flange specs; accompanying 422, 430, 615, 619, 622, 637, 645, 837, 845, 855, 875, 890 and 8110 types)
Discharge pipe 1 pc (on JIS20K flange specs; accompanying 675, 690 and 6110 types)
Electrode-type leakage sensor 1 set (55 kW or over)
Cathodic protection anodes
Options:
Special paint
Extended cable
LH SERIES … EXTRA HIGH HEAD
These cylindrical pumps can be installed in narrow places as the centred discharge flange ensures the pumps are balanced for lifting. Cast iron or cast 316 stainless steel options.
Discharge port 100 - 200mm
Top discharge … slimline design means pump can fit into narrow locations
Closed type impeller (Hi chrome iron on cast iron, cast 316 on ss version)
Three phase, 2 pole motors from 15 to 110kW
The LH-W series are an extra high head version of the LH pumps. They have two abrasion resistant, hi chrome closed impellers. The centred discharge flange ensures the pump is balanced for lifting.
Discharge port 50 - 100mm
Top discharge … slimline design enables pump to be used in bores and wells
Twin impeller, except LH33.0 - (Hi chrome iron)
Three phase, 2 pole motors from 3 to 110kW
Applications
Mine dewatering
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Water harvesting
Standard Accessories
20 metre power cable
Discharge connection (thread or flange)
Gal corrosion protection anodes (except 3kW models)
Options:
Extended cable
Cathodic protection plates (3kW models only)
Centred discharge (JIS 10K) flange (3kW models only)
Seawater resistant adaptor kit
MINING/CONSTRUCTION
0 1,000 Capacity (L/min)
0 1,000 Capacity (L/min)
0 2000 4000 6000 Capacity (L/min)
15kW - 37kW
LH-W (twin impeller)
LH series
1000 volt options p22
QUARRY/MINING/ WATER HARVESTING
3 PHASE, 2 POLE, HIGH HEAD & HIGH FLOW
Tandem operation available … allows two pumps of the same model to connect in series. This provides double pump head at the same flow rate.
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 15
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Tsurumi seawater kit available … p 22 1, 000 volt option available … p 22 Used extensively in batch plants
1.2.3 LH (LH-W) SERIES CONTINUED
DIMENSIONS (MM)
Model d B D W1
LH23.0W 50 630 185 200
LH25.5W 50 750 240 170
LH311W 80 1030 270 200
LH322W 80 1235 330 300
LH430W 100 1375 365 300
LH4110W 100 1826 616 380
Single stage model
LH33.0 80 645 185 150
LH SERIES
LH422 100 1352 420 250
LH430 100 1352 420 250
LH615 150 1014 330 185
LH619 150 1423 420 270
LH622 150 1423 420 270
LH637 150 1448 530 180
LH645 150 1448 530 180
LH675 150 1676 550 200
LH6110 150 1787 595 200
LH837 200 1488 530 180
LH845 200 1488 530 180
LH855 200 1716 550 200
LH875 200 1716 550 200
LH8110 200 1787 595 200
Do not operate pump below C.W.L (continuous running water level)
LH-33 LH-W LH SERIES
5 great features ... 5 times the life!
Standard in every Tsurumi LH submersible
Anti-wicking cable entry
SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
Water harvesting
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solids mm
Max. Depth m
Cable Length m
List Price
Stainless steel option S/code List price
50 LH23.0W TUC-LH23.0W 3 6.5 39 600 d.o.l. 46 6 50 20 $3,541 n/a
50 LH25.5W TUC-LH25.5W 5.5 11 60 465 d.o.l. 80 6 50 20 $6,881 n/a
80 LH311W TUC-LH311W 11 22 79 825 d.o.l. 130 8.5 50 20 $10,985 TUC-LH311W-14 $35,806
80 LH322W TUC-LH322W 22 39 105 950 d.o.l. 304 8.5 50 20 $21,319 TUC-LH322W-14 $69,487
100 LH430W TUC-LH430W 30 53 125 1,400 Star Delta 324 8.5 50 20 $29,400 n/a
100 LH4110W TUC-LH4110W 110 136 200 1,000 Star Delta 1270 8 50 20 $65,023 n/a
Single stage model
80 LH33.0 TUC-LH33.0 3 6.5 17.9 1000 d.o.l. 42 6 50 20 $3,541 n/a
LH SERIES
100 LH422 TUC-LH422 22 40.5 66 2,400 d.o.l. 350 6 50 10 $14,504 TUC-LH422-14 $60,482
100 LH430 TUC-LH430 30 55 80 2,300 Star Delta 355 6 50 10 $16,005 n/a
150 LH615 TUC-LH615 15 27.5 52 2,400 d.o.l. 213 8.5 50 10 $10,244 n/a
150 LH619 TUC-LH619 19 36 42 4,370 d.o.l. 350 12 50 10 $14,358 n/a
150 LH622 TUC-LH622 22 40.5 54 3,750 d.o.l. 360 12 50 10 $15,350 n/a
150 LH637 TUC-LH637 37 67 89.5 2,380 Star Delta 495 6 50 10 $25,506 TUC-LH637-14 $95,370
150 LH645 TUC-LH645 45 81 90 2,975 Star Delta 510 6 50 10 $28,792 n/a
150 LH675 TUC-LH675 75 130 132 2,450 Star Delta 850 6 50 10 $66,894 n/a
150 LH6110 TUC-LH6110 110 195 177 3,000 Star Delta 3000 6 30 20 $69,209 TUC-LH6110-14 poa
200 LH837 TUC-LH837 37 67 51.8 5,375 Star Delta 495 20 50 10 $25,971 TUC-LH837-14 $95,370
200 LH845 TUC-LH845 45 81 50.9 5,450 Star Delta 510 20 50 10 $27,832 n/a
NEW 200 LH855 TUC-LH855 55 99 70 5,750 Star Delta 810 20 50 10 $30,800 n/a
200 LH875 TUC-LH875 75 130 70 6,500 Star Delta 850 20 50 10 $65,215 n/a
200 LH8110 TUC-LH8110 110 TBA 107 6,500 Star Delta 1325 20 30 20 $69,209 TUC-LH8110-14 poa
3 PHASE, 2 POLE, HIGH HEAD & HIGH FLOW
QUARRY/MINING/ WATER HARVESTING
Materials of Construction
Impeller Chromium iron casting
Pump casing Grey iron casting
Wear ring Chromium iron casting
Motor frame Grey iron casting
Shaft SUS420J2 (EN-X30Cr13)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 16
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 2,000 4,000 Capacity (L/min)
1.2.4 KRS SERIES
DIRTY WATER … 12,000 LPM
KRS series are cast iron, high volume, heavy-duty dewatering pumps with 4-pole motors. They offer reliability, ruggedness and durability.
Discharge port 80 - 250mm
Top discharge
Semi-open type impeller, ductile cast iron (closed type on KRS1022)
Three phase, 4 pole motors (from 2.2 to 22kW) for continuous service
Applications
General dewatering
Mine dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Standard Accessories
Cabtyre cable (1 pc)
Hose coupling (1 pc)
Options
Extended cable
Seawater resistant adaptor kit
LOW HEAD/HIGH FLOW ... 5,300 LPM This version of the KRS series are equipped with highly efficient motors that minimize power consumption.
Discharge port 100 - 200mm
Top discharge
Semi-open type impeller, ductile cast iron (closed type on KRS-63, 85.5)
Three phase, 4 pole motors (from 2.2 to 9kW) for performance and durability
SLURRY … 4,000 LPM
With all the features of the standard KRS series, these heavy duty slurry pumps are equipped with a high chromium cast iron agitators that ensure smooth suction of the settled matter.
The other wear parts such as the impeller and the suction plate are also made of high-chromium cast iron for extra durability.
Discharge port 80 - 200mm
Top discharge
Semi open type impeller (Chromium - durable & corrosion resistant)
Three phase, 4 pole motor, 4 - 9kW
Applications
Draining sand laden water
Draining, transferring, or mixing slurry
Batch plants
Standard Accessories
Hose coupling (1 pc)
Hose band (1 pc) Options
Extended cable
0 2,000 4,000 Capacity (L/min)
0 2,000 4,000 Capacity (L/min)
0 5,000 10,000 Capacity (L/min)
QUARRY/MINING/ WATER HARVESTING
4 POLE, HIGH FLOW DIRTY WATER & SLURRY
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 17
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.4 KRS SERIES
Tsurumi seawater kit available … p 22
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A
Head max. m
Capacity max. l/min
Starting Method
Dimensions L x H mm
Dry Weight kg
Max. Solids mm
Max. Depth m
Cable Length m
List Price
80 KRS2-C3 TUC-KRS2-C3 2.2 5.1 10 1,000 d.o.l. 340 x 620 72 8 30 8 $3,831
80 KRS2-D3 TUC-KRS2-D3 3.7 8.0 17 1,400 d.o.l. 365 x 705 91 8 30 8 $4,394
100 KRS2-C4 TUC-KRS2-C4 3.7 8.0 14 1,600 d.o.l. 350 x 720 88 8 30 8 $4,394
100 KRS2-D4 TUC-KRS2-D4 5.5 12.1 20 2,000 d.o.l. 365 x 710 98 8 30 8 $5,199
150 KRS2-C6 TUC-KRS2-C6 7.5 15.0 19 2,800 d.o.l. 415 x 767 130 8 30 8 $5,830
150 KRS2-D6 TUC-KRS2-D6 11 22.0 22 3,700 d.o.l. 434 x 813 158 8 30 8 $7,157
200 KRS2-8S TUC-KRS2-8S 11 22.0 18 5,100 d.o.l. 473 x 933 174 8 30 8 $8,063
200 KRS815 TUC-KRS815 15 29 21.5 6,400 d.o.l. 481 x 1069 235 25 30 8 $10,988
200 KRS819 TUC-KRS819 18.5 33.5 29 5,500 d.o.l. 576 x 1241 385 25 30 10 $18,530
200 KRS822 TUC-KRS822 22 43 34 5,300 d.o.l. 576 x 1241 390 25 30 10 $18,017
200 KRS822L TUC-KRS822L 22 42 26 5,900 d.o.l. 576 x 1241 390 25 30 10 $18,017
250 KRS1022 TUC-KRS1022 22 45 12.2 12,000 d.o.l. 525 x 1419 450 25 30 10 $23,451
LOW HEAD / HIGH FLOW VERSION
100 KRS-43 TUC-KRS-43 3 6.5 14.8 1,820 d.o.l. 378 x 723 95 12 30 8 $4,440
150 KRS-63 TUC-KRS-63 3 6.5 8 3,250 d.o.l. 384 x 866 97 15 30 8 $4,776
150 KRS-65.5 TUC-KRS-65.5 5.5 12.1 17 3,200 d.o.l. 425 x 790 118 20 30 8 $5,963
150 KRS2-69 TUC-KRS2-69 9 19 21 4,250 d.o.l 490 x 812 155 20 30 8 $8,304
200 KRS-85.5 TUC-KRS-85.5 5.5 12.1 10 4,850 d.o.l. 446 x 941 126 20 30 8 $6,997
200 KRS2-89 TUC-KRS2-89 9 19 15 5,300 d.o.l 473 x 933 175 30 30 8 $8,043
SLURRY VERSION
80 KRS2-80 TUC-KRS2-80 4 9.5 15.8 1,670 d.o.l. 349 x 800 105 30 30 8 $6,328
100 KRS2-100 TUC-KRS2-100 6 13 17.1 2,350 d.o.l. 415 x 835 145 30 30 8 $6,624
150 KRS2-150 TUC-KRS2-150 9 18.5 22 3,250 d.o.l. 433 x 898 170 30 30 8 $8,372
200 KRS-200 TUC-KRS-200 18 34.5 31 4,000 d.o.l. 576 x 1181 380 30 30 8 $31,205
SEWER BYPASS
200 KRSU822 TUC-KRSU822-51 22 26.5 5,700 d.o.l. 546 x 1486 430 56 10 $25,257
QUARRY/MINING/ WATER HARVESTING
4 POLE, HIGH FLOW DIRTY WATER & SLURRY
KRS Materials of Construction
Impeller Ductile iron casting
(Chrome on slurry version)
Pump casing Grey iron casting
Suction cover Grey iron casting
Motor frame Grey iron casting
Shaft SUS420J2 (EN-X30Cr13)
KRSU SEWER BYPASS … 26M HEAD
KRSU is a cast iron, high heavy duty pump designed specifically by sewage bypass during sewer rectification works.
It’s space saving design means it fits down a standard manhole.
Discharge port 200mm
Top discharge, side flow design for motor cooling
Large solids passage
Three phase, 4 pole motor (22kW)
Stable pump stand
0 3,000 6,000 Capacity (L/min)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 18
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.5 NKZ SERIES
Applications
Draining sand laden water
Draining slurry in cement plants, quarries or mines
Pumping sediments in wastewater treatment plant
Standard Accessories
Hose coupling (1 pc)
Options
Seawater resistant adaptor kit
The NKZ series of high head sand pumps have a spiral pump casing and a shaft mounted agitator for smooth suction of slurry, mud or sand.
The pump has a water jacket for cooling the motor. This allows the pump to operate at low water levels for extended periods.
Discharge port 80 - 150mm
Side discharge
Semi open type impeller (Ductile iron, (Hi chrome iron - H type))
Three phase, 4 pole motor, 2.2 - 11kW
Spiral design aids smooth suction of sand & silt
Water jacket cools motor even at low water levels
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
NKZ3-C3 80 466 404 372 249 368 664 225
NKZ3-80H 80 491 230 386 263 400 753 220
NKZ3-C4 100 466 404 387 249 368 709 225
NKZ3-D4 100 485 424 382 414 380 715 220
NKZ3-100H 100 547 486 422 450 414 841 240
NKZ3-D6 100 620 520 458 266 450 798 240
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m List Price
80 NKZ3-C3 TUC-NKZ3-C3 2.2 5.1 3-phase 12.5 900 d.o.l. 91 30 30 8 $4,698
80 NKZ3-80H TUC-NKZ3-80H 5.5 12.1 3-phase 24.5 1,550 d.o.l. 132 20 30 8 $5,568
100 NKZ3-C4 TUC-NKZ3-C4 3.7 8 3-phase 16 1,500 d.o.l. 97 30 30 8 $5,158
100 NKZ3-D4 TUC-NKZ3-D4 5.5 12.1 3-phase 19 2,000 d.o.l. 115 30 30 8 $6,012
100 NKZ3-100H TUC-NKZ3-100H 11 22 3-phase 29 2,400 d.o.l. 196 20 30 8 $9,659
150 NKZ3-D6 TUC-NKZ3-D6 11 22 3-phase 22 4,000 d.o.l. 192 30 30 8 $8,247
Do not operate pump below C.W.L (continuous running water level)
5 great features ... 5 times the life!
Standard in every Tsurumi NKZ submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
0 2,000 4,000
Capacity (L/min)
QUARRY/PILING/ CONSTRUCTION 4 POLE, SAND & MUD
Materials of Construction
Impeller Chromium iron casting
Pump casing Grey iron casting
Suction cover Ductile iron casting
Agitator Ductile iron casting
Motor frame Grey iron casting
Shaft SUS420J2 (EN-X30Cr13)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 19
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.6 GPN SERIES .. 9,000 LPM
The GPN series are powerful, heavy duty sand and slurry pumps with large agitators. Hi chrome wearing parts and an extra thick pump casing means the pump delivers long-lasting performance and outstanding durability.
They have a water jacket for forced cooling of the motor, which permits the pump to operate at low water levels for extended period of time.
Discharge port 80 - 200mm
Side discharge
Semi open type impeller (Hi chrome)
Three phase, 4 pole & 6 pole motors, 5.5 - 37kW
Hi chrome wearing parts for longevity
Water jacket cools motor even at low water levels
Air release valve in water jacket prevents air-lock
Chromium Molybdenum motor shaft
Applications
Draining sand laden water
Transferring & draining bentonite slurry in piling works
Draining slurry in cement plants, quarries or mines
Pumping sediments in wastewater treatment plant
Pumping scale at steel works
Standard Accessories
Hose coupling (1 pc)
Options
Seawater resistant adaptor kit
DIMENSIONS (MM)
Model d A A1 B B1 D H W1
GPN35.5 80 487 426 429 307 390 777 270
GPN411 100 617 517 481 328 450 860 295
GPN415 100 617 517 481 328 450 860 295
GPN422 100 725 625 488 335 573 1102 300
GPN622 150 725 625 528 335 572 1102 300
GPN837 200 1015 850 898 749 1606 560
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Max. Water Depth m
Cable Length m
List Price Poles
80 GPN35.5 (GPN3-80)
TUC-GPN35.5 5.5 12.1 3-phase 16.3 1,900 d.o.l. 145 30 40 8 $7,454 4
100 GPN411(GPN3-100)
TUC-GPN411 11 22 3-phase 19.3 3,250 d.o.l. 217 30 40 8 $10,882 4
100 GPN415 TUC-GPN415 15 27.5 3-phase 21 4,000 d.o.l. 220 30 40 8 $11,728 4
100 GPN422 TUC-GPN422 22 42 3-phase 34 3,600 d.o.l. 415 30 40 8 $33,044 4
150 GPN622 TUC-GPN622 22 42 3-phase 28 5,000 d.o.l. 415 30 40 8 $33,044 4
200 GPN837 TUC-GPN837 37 73 3-phase 24 9,000 Star-Delta 800 30 40 8 $47,561 6
Do not operate pump below C.W.L (continuous running water level)
5 essential features …. 5 times the life!
Standard in every Tsurumi GPN submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
0 5,000 10,000 Capacity (L/min)
MINING/SAND MINING/ BRIDGEWORKS
4 & 6 POLE, SLOW SPEED HIGH FLOW SAND & SLURRY
Materials of Construction
Impeller Chromium iron casting
Pump casing FC200 (EN-GJL-200)
Motor frame FC150 (EN-GJL-150)
Shaft SUS1.7220 (chromium molybdenum)
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 20
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.7 GSZ & GSD SERIES
4 POLE … 18,000 LPM GSZ-4 series are high head and high volume dewatering pumps with 4-pole motors.
The pumps have a water jacket surrounding the motor casing. This allows the pump to operate at low water levels for extended periods.
Discharge port 150 - 250mm
Side discharge
Closed type impeller (Hi chrome) except GSZ2-75-4 which is cast 304 stainless steel.
Three phase, 4 pole motors (from 37 to 75kW)
Applications
General dewatering
Drainage on construction sites
Draining wells
Draining basements or pits
Stormwater dewatering
Standard Accessories
Cabtyre cable (2 pc)
JIS 10K flange Options
Extended cable
Applications
Draining sand laden water
Draining slurry in cement plants, quarries or mines
Pumping sediments in wastewater treatment plant
Pumping scale at steel works
Standard Accessories
JIS 10K flange
6 POLE … 10,500 LPM The GSZ-6 series are powerful, high volume sand pumps operated by a 6-pole motors. Hi chrome wearing parts, coupled with the slow speed motor, will ensure extremely long wear life. It has a water jacket for forced cooling of the motor which permits the pump to operate at low water levels for extended period of time.
Discharge port 200mm
Side discharge
Semi open type impeller (Hi chrome iron)
Three phase, 6 pole motors, 22 - 37kW
Hi chrome wearing parts for longevity
Water jacket cools motor even at low water levels
0 5,000 10,000 Capacity (L/min)
0 10,000 20,000 Capacity (L/min)
0 5,000 10,000 Capacity (L/min)
SLURRY … GSD … 4 POLE … 10,600 LPM
The GSD series are powerful, high volume agitator pumps operated by a 4-pole motors. Hi chrome wearing parts including an agitator to assist smooth suction of silt and debris.
Discharge port 200mm & 250mm
Side discharge
Closed type impeller (Hi chrome iron)
Three phase, 4 pole motors, 37-75kW
Shaft mounted agitator (Hi Chrome)
Water jacket cools motor even at low water levels
QUARRY/MINING/ SAND DREDGING
4 & 6 POLE, HUGE FLOWS DIRTY WATER & SLURRY
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 21
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
DIMENSIONS (MM)
Model d A A1 B D H W1
GSZ5-37-4H 150 900 760 520 700 1553 440
GSZ5-37-4 200 915 750 550 660 1583 480
GSZ4-45-4 200 915 750 600 660 1591 460
GSZ2-55-4 250 1050 850 655 708 1927 510
GSZ2-75-4 250 1050 850 655 708 1927 510
GSZ2-75-4L 250 1050 850 700 739 1972 730
6 POLE VERSION
GSZ5-22-6 200 965 800 474 720 1393 350
GSZ5-37-6 200 1047 882 430 804 1424 370
SLURRY VERSION
GSD-37-4 200 915 750 550 660 1583 480
GSD-55-4 200 1050 850 655 708 1927 510
GSD-75-4 250 1050 850 655 708 1927 510
Discharge Port (mm) Model S/code
Motor Output kW
Rated Current A Phase
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Cable Length m List Price
150 GSZ5-37-4H TUC-GSZ5-37-4H 37 73 3-phase 60 5,000 Star Delta 595 10 10 $34,608
200 GSZ5-37-4 TUC-GSZ5-37-4 37 73 3-phase 43 8,500 Star Delta 566 25 10 $32,448
200 GSZ4-45-4 TUC-GSZ4-45-4 45 84 3-phase 46 9,000 Star Delta 583 25 10 $37,147
250 GSZ2-55-4 TUC-GSZ2-55-4 55 105 3-phase 50 9,500 Star Delta 1091 25 10 $41,593
250 GSZ2-75-4 TUC-GSZ2-75-4 75 150 3-phase 54 13,000 Star Delta 1141 25 10 $49,852
250 GSZ2-75-4L TUC-GSZ2-75-4L 75 150 3-phase 37 18,000 Star Delta 1200 25 10 $49,852
6 POLE VERSION
200 GSZ5-22-6 TUC-GSZ5-22-6 22 45 3-phase 21 9,000 d.o.l 685 50 10 $35,935
200 GSZ5-37-6 TUC-GSZ5-37-6 37 79 3-phase 28 10,500 Star Delta 796 50 10 $48,434
SLURRY VERSION
200 GSD-37-4 TUC-GSD-37-4 37 73 3-phase 37 7,000 Star Delta 685 25 10 $39,880
200 GSD-55-4 TUC-GSD-55-4 55 105 3-phase 38 9,000 Star Delta 1215 25 10 $51,149
250 GSD-75-4 TUC-GSD-75-4 75 150 3-phase 48 10,600 Star Delta 1215 25 10 $59,751
STANDARD 6 POLE VERSION
1.2.7 GSZ & GSD SERIES
5 great features ... 5 times the life!
Standard in every Tsurumi GSZ submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
QUARRY/MINING/ SAND DREDGING
4 & 6 POLE, HUGE FLOWS DIRTY WATER & SLURRY
Materials of Construction
Impeller SCS1 (DIN GX12Cr14)
Pump casing FC200 (EN-GJL-200)
Suction cover FC200 (EN-GJL-200)
Motor frame FC200 (EN-GJL-200)
Shaft Stainless steel SUS420J2
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 22
CO
NT
RA
CT
OR
PU
MP
S
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
1.2.8 1000 VOLT MINE PUMPS
Selected KTV, KTZ , LH & SFQ series pumps in 1,000V 50 Hz.
Discharge port 50 - 200mm
Three phase, 2 pole motors from 2.2 to 110kW
Flows to 6,500 lpm, heads to 107m
Simple to maintain
Screened cable with heavy duty CSP elastomer sheath (Hypalon); oil resistant, flame retardant & resists the effects of water absorption. Designed in accordance with Australian Standards AS1125, AS3191, AS/NZS 5000-1. Max allowable tensile stress 15N/mm2.
Contact Aussie Pumps for confirmation of available sizes.
Port (mm) Model S/code
Motor Output kW
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solids mm
Max. water Depth m
Cable Length m
List Price
50 KTV2-22 TUC-KTV2-22-1V 2.2 24 525 d.o.l. 23.0 8.5 50 10 $8,767
80 KTZ35.5 TUC-KTZ35.5-1V 5.5 32 1,100 d.o.l. 82 10 50 10 $10,789
100 KTZ411 TUC-KTZ411-1V 11 48.5 1,440 d.o.l. 133 10 50 10 $15,316
80 LH311W TUC-LH311W-1V 11 79 825 d.o.l. 130 8.5 50 10 $18,786
80 LH322W TUC-LH322W-1V 22 120 1,180 d.o.l. 304 8.5 50 10 $30,358
100 LH422 TUC-LH422-1V 22 66 2,400 d.o.l. 350 6 50 10 $25,122
150 LH637 TUC-LH637-1V 37 89.5 2,380 Star Delta 495 6 50 10 $37,239
150 LH6110 TUC-LH6110-1V 110 177 3,000 Star Delta 3000 6 30 10 $87,731
200 LH837 TUC-LH837-1V 37 51.8 5,375 Star Delta 495 20 50 10 $37,239
200 LH8110 TUC-LH8110-1V 110 107 6,500 Star Delta 1325 20 30 10 $87,731
STAINLESS STEEL PUMPS 80 LH311W TUC-LH311W-141V 11 79 825 d.o.l. 130 8.5 50 10 $45,101
80 LH322W TUC-LH322W-141V 22 120 1,180 d.o.l. 304 8.5 50 10 $81,524
100 LH422 TUC-LH422-14-1V 22 66 2,400 d.o.l. 350 6 50 10 $72,344
150 LH637 TUC-LH637-14-1V 37 89.5 2,380 Star Delta 495 6 50 10 $110,541
150 LH6110 TUC-LH6110-141V 110 177 3,000 Star Delta 3000 6 30 10 poa
200 LH837 TUC-LH837-14-1V 37 51.8 5,375 Star Delta 495 20 50 10 $110,541
200 LH8110 TUC-LH8110-14-1V 110 107 6,500 Star Delta 1325 20 30 10 poa
80 80SFQ25.5 TUI-SFQ25.5-80V 5.5 30 1,340 d.o.l. 124 18 10 $23,302
80 80SFQ211 TUI-SFQ211-80V 11 44 1,950 d.o.l. 143 23 10 $27,757
Selected Tsurumi standard pumps can be fitted with a seawater-resistant kit to extend pump life in salt water applications.
The kit includes sacrificial anodes and a special chromium cast iron impeller.
The kit is easy to fit using standard tools.
NB : For a seawater pump add the price of the kit to the price of the pump
Seawater Resistant Impeller
The impeller is manufactured from a specially treated chromium cast iron. The impeller is 10 times more resistant to corrosive wear than one made of conventional cast iron.
See operator’s manual for replacement periods.
Discharge Port (mm)
Suits Model
More pump details page
Pump only S/code
List Price pump only S/code
List Price kit only
Motor Output kW
80 KTZ33.7 12/13 TUC-KTZ33.7 $3,081 TUC-KTZ33.7SWKT $1,374 3.7
100 KTZ411 12/13 TUC-KTZ411 $7,386 TUC-KTZ411SWKIT $1,320 11
200 KRS822 16/17 TUC-KRS822 $20,179 TUC-KRS822SWKIT $4,901 22
80 LH311W 14/15 TUC-LH311W $10,985 TUC-LH311WSWKIT $2,914 11
150 LH645 14/15 TUC-LH645 $28,792 TUC-LH645SWKIT $7,634 45
1.2.9 SEAWATER RESISTANT KIT
Fitting kit demo
Standard Accessories
Hose coupling
Fitted cable (10m)
MINING/QUARRIES/ DRY DOCKS
1000 VOLT / STAINLESS STEEL / SEAWATER KITS
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 23
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
& wastewater treatment equipment
INDUSTRIAL PUMPS
VANCS SERIES …EFFLUENT & CHEMICAL SUBS PU & TM SERIES (pages 24-26)
Corrosion resistant (resin wetted parts with stainless steel or Titanium housings)
Portable & robust
Simple auto & alternation control options
VANCS
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 24
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Discharge port 40 - 80mm
Side discharge
Vortex impeller … suits effluent (glass-fibre reinforced resin)
Single & three phase, 2 pole motors, 0.15 - 3.7kW
Corrosion resistant … top quality grade 304 stainless steel
Robust & portable
Silicon carbide mech seal
Applications Transferring wastewater
Pumping rainwater with foreign material
Sewage pumping
The PU series is one of the Tsurumi VANCS-series. Made of stainless steel and FRP resin, the pumps are lightweight and corrosion-resistant. The vortex impellers and large passages allow compressible solids in suspension to pass through.
Automatic and alternating versions can be used together to set up simple dual pump systems without the need for control boxes.
Standard Accessories
Free Standing
Screwed flange
Guide Rail Fitting TOK
Lifting chain 4m* (with shackles) 5m for 1.5kW
Guide support (with bolts & nuts)
Guide hook & duckfoot bend
2.1.1 PU SERIES … VANCS-SERIES
Primary Operations Secondary Operations
1. ‘START’ Float 3 activates pump W to discharge water.
1. ‘START’ Float 4 activates pump A to discharge water.
2. Water level falls 2. Water level falls
3. ‘STOP’ float 2 stops pump W. ’START’ float 3 of pump W rests for one discharge operation.
3. ‘STOP’ float 1 stops pump A. ‘START’ float 3 of pump W has reset, ready for operation next cycle.
A simple dual pump system can be set using an automatic and alternating pump. No complicated, external control panel is required. Simply connect power to each pump. By adjusting the float levels the pumps can be set to run alternately. If extra capacity is required, both pumps will automatically work together.
The alternating model has three floats and can be identified by the suffix ’W’ in the model name. They are available in the same output range as the automatic pumps.
If the inflow exceeds the ability of the operating pump, the top float on the second pump will activate ensuring maximum pumping capacity.
AUTO DUPLEXING - MADE SIMPLE … no expensive control panel needed
CALL FOR 12 PACK BULK PRICES
SIMPLE, LOW COST INSTALLATION
For online demo search Tsurumi Pump Automatic Operation or click You Tube image
PLUMBERS/ FOOD WASTE
CORROSION RESISTANT EFFLUENT PUMPS
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 25
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Override float (green)
Alternation (PUW )
Start float (yellow)
Stop float (red)
Automatic (PUA )
2.1.1 PU SERIES … VANCS-SERIES
Discharge Port mm Model S/code
Motor Head max m
Capacity max. l/m
Starting Method
Dimensions lxwxh mm
Dry Weight kg
Max. Solid Handling mm
Cable Length m List Price
Output kW Phase
Running Amps
40 40PU2.15S TUI-PU2.15SP 0.15 single 3 5.5 200 Capacitor 255x154x377 6.1 35 5 $676
40 40PU2.15 TUI-PU2.15-40 0.15 3-phase 0.7 5.5 200 d.o.l. 255x154x377 5.6 35 6 $508
40 40PU2.25S TUI-PU2.25SP 0.25 single 2.5 6.5 210 Capacitor 236x162x360 7.1 35 5 $848
40 40PU2.25 TUI-PU2.25-40 0.25 3-phase 0.8 6.5 210 d.o.l. 236x162x349 7.1 35 6 $716
50 50PU2.25 TUI-PU2.25-50 0.25 3-phase 0.9 6.6 210 d.o.l. 236x162x349 6.6 35 6 $716
50 50PU2.4S TUI-PU2.4S-50P 0.4 single 3.1 9.6 270 condenser 236x162x360 7.1 35 5 $878
50 50PU2.4 TUI-PU2.4-50 0.4 3-phase 1.2 9.6 270 d.o.l. 236x162x360 7 35 6 $773
50 50PU2.75S TUI-PU2.75SP 0.75 single 5.4 12.5 360 condenser 236x162x380 8.9 35 5 $1,128
50 50PU2.75 TUI-PU2.75-50 0.75 3-phase 1.9 12.5 360 d.o.l. 236x162x374 8.3 35 6 $804
80 80PU21.5 TUI-PU21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 295x196x475 15.8 46 6 $1,572
80 80PU22.2 TUI-PU22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 311x212x583 22 46 6 $2,518
80 80PU23.7 TUI-PU23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 311x212x618 27 46 6 $3,124 Automatic (two floats)
40 40PUA2.15S TUI-PUA2.15SP 0.15 single 3 5.5 200 Capacitor 255x154x377 6.6 35 5 $822
40 40PUA2.15 TUI-PUA2.15-40 0.15 3-phase 0.7 5.5 200 d.o.l. 255x154x377 6.2 35 6 $652
40 40PUA2.25S TUI-PUA2.25SP 0.25 single 2.5 6.5 210 Capacitor 236x162x360 7.7 35 5 $1,036
40 40PUA2.25 TUI-PUA2.25-40 0.25 3-phase 0.8 6.5 210 d.o.l. 236x162x349 6.7 35 6 $909
50 50PUA2.4S TUI-PUA2.4SP 0.4 single 3.0 9.6 270 condenser 236x162x360 7.7 35 5 $1,073
50 50PUA2.4 TUI-PUA2.4-50 0.4 3-phase 1.15 9.6 270 d.o.l. 236x162x360 7.5 35 6 $942
50 50PUA2.75S TUI-PUA2.75SP 0.75 single 5.4 12.5 360 condenser 236x162x380 9.5 35 5 $1,474
50 50PUA2.75 TUI-PUA2.75-50 0.75 3-phase 1.8 12.5 360 d.o.l. 236x162x374 8.8 35 6 $1,060
80 80PUA21.5 TUI-PUA21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 295x196x475 16.5 46 6 $2,274
80 80PUA22.2 TUI-PUA22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 311x212x583 23 46 6 $2,913
80 80PUA23.7 TUI-PUA23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 311x212x618 28 46 6 $3,571 Alternation version (three floats)
40 40PUW2.15S TUI-PUW2.15SP 0.15 single 3 5.5 200 Capacitor 255x154x377 6.6 35 5 $993
40 40PUW2.15 TUI-PUW2.15-40 0.15 3-phase 0.7 5.5 200 d.o.l. 255x154x377 6.2 35 6 $783
40 40PUW2.25S TUI-PUW2.25SP 0.25 single 2.5 6.5 210 Capacitor 236x162x360 7.7 35 5 $1,351
40 40PUW2.25 TUI-PUW2.25-40 0.25 3-phase 0.8 6.5 210 d.o.l. 236x162x349 6.7 35 6 $1,221
50 50PUW2.4S TUI-PUW2.4-SP 0.4 single 3.0 9.6 270 d.o.l. 236x162x360 7.5 35 5 $1,340
50 50PUW2.4 TUI-PUW2.4-50 0.4 3-phase 1.15 9.6 270 d.o.l. 236x162x360 7.5 35 6 $1,282
50 50PUW2.75 TUI-PUW2.75-50 0.75 3-phase 5.4 12.5 360 d.o.l. 236x162x374 8.8 35 6 $1,368
80 80PUW21.5 TUI-PUW21.5-80 1.5 3-phase 4.0 15 780 d.o.l. 295x196x475 16.5 46 6 $2,466
80 80PUW22.2 TUI-PUW22.2-80 2.2 3-phase 5.1 18 820 d.o.l. 311x212x583 23 46 6 $3,030
80 80PUW23.7 TUI-PUW23.7-80 3.7 3-phase 7.5 24 950 d.o.l. 311x212x618 28 46 6 $3,819 TOS Guide Kits (note: guide rails not included in kit)
TOK4-P TUI-TOK4-P Guide rail fitting for VANCS series up to 0.75kW (2kg) $344
TOK2-65T TUI-TOK2-65T Guide rail fitting for VANCS series 1.5/2.2/3.7kW (4kg) $544
0 400 800 Capacity (L/min)
PLUMBERS/ FOOD WASTE
CORROSION RESISTANT EFFLUENT PUMPS
Materials of Construction
Impeller Glass fibre reinforced resin
Pump casing Glass fibre reinforced resin/ resin
Motor frame Stainless steel SUS304 (EN-X5CrNi18-10)
Shaft Stainless steel SUS403 (EN-X5CrNi18-10)
Replacement power cable for single phase (10m)
s/code List price
TS-00100811 $116
Replacement float sets (auto & alternation)
Type s/code List price
PUA (2 floats)
1.5kW & under TS-10648214 $182
2.2kW & over TS-10600001 $193
1.5kW & under TS-10648315 $244 PUW (3 floats) 2.2kW & over TS-10600002 $296
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 26
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
2.1.2 MARINE MATE … TM SERIES … VANCS-SERIES
The TM series is one of the Tsurumi VANCS series. With titanium stator housing and FRP resin wetted parts, the pumps are lightweight and corrosion-resistant.
They are ideally suited to seawater and marine applications.
Applications
Pumping bilge water
Circulating seawater in aquaculture
Pond and waterfall circulation
Chemical transfer
Food & beverage processing
Standard Accessories Free Standing
Screwed flange
Discharge port 40 - 80mm
Side discharge
Vortex impeller (Glass-fibre Reinforced Resin)
Single & three phase, 2 pole motors, 0.25 - 3.7kW
Corrosion resistant
Lightweight & portable
Silicon carbide mech seal
Discharge Port (mm) Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Dry Weight Kg FREE STANDING List Price
Cable Length m
Dimensions lxwxh mm
Output
Phase
Running
kW Amp
40 40TM2.25S TUI-TM2.25SP 0.25 single 2.5 9 240 condenser 6.7 5 $2,484 236x162x360
40 40TM2.25 TUI-TM2.25-40 0.25 3-phase 0.9 9 240 d.o.l. 5.7 6 $2,290 236x162x349
50 50TM2.4S TUI-TM2.4SP 0.4 single 3.1 12 290 condenser 6.7 5 $2,531 236x162x360
50 50TM2.4 TUI-TM2.4-50 0.4 3-phase 1.2 12 300 d.o.l. 6.6 6 $2,337 236x162x360
50 50TM2.75 TUI-TM2.75-50 0.75 3-phase 1.9 15 350 d.o.l. 7.8 6 $2,492 236x162x374
50 50TM21.5 TUI-TM21.5-50 1.5 3-phase 4.0 17 650 d.o.l. 14.9 6 $4,575 295x196x435
80 80TM22.2 TUI-TM22.2-80 2.2 3-phase 5.1 19 700 d.o.l. 21 6 $6,533 311x212x559
80 80TM23.7 TUI-TM23.7-80 3.7 3-phase 7.5 26 900 d.o.l. 26 6 $8,046 311x212x594
Automatic (two floats)
40 40TMA2.25S TUI-TMA2.25SP 0.25 single 2.5 9 240 condenser 7.2 5 $2,722 236x162x360
40 40TMA2.25 TUI-TMA2.25-40 0.25 3-phase 0.9 9 240 d.o.l. 6.2 6 $2,526 236x162x349
50 50TMA2.4S TUI-TMA2.4SP 0.4 single 3.1 12 290 condenser 7.2 5 $2,708 236x162x360
50 50TMA2.4 TUI-TMA2.4-50 0.4 3-phase 1.2 12 300 d.o.l. 7.1 6 $2,587 236x162x360
50 50TMA2.75 TUI-TMA2.75-50 0.75 3-phase 1.9 15 350 d.o.l. 8.4 6 $2,792 236x162x374
50 50TMA21.5 TUI-TMA21.5-50 1.5 3-phase 4.0 17 650 d.o.l. 15.5 6 $5,215 295x196x435
80 80TMA22.2 TUI-TMA22.2-80 2.2 3-phase 5.1 19 700 d.o.l. 22 6 $6,978 311x212x559
80 80TMA23.7 TUI-TMA23.7-80 3.7 3-phase 7.5 26 900 d.o.l. 27 6 $8,704 311x212x594
60 HZ options … designed for a life at sea
TMA automatic version
TM manual version
0 400 800 Capacity (L/min)
Do not operate the pump at the levels below the C.W.L. longer than 15 minutes (30 minutes maximum on the models with 0.15kW power output).
Call for chemical compatibility chart on VANCs pumps
Base configuration on 2.2 & 3.7 kW non auto models
FOOD & CHEMICAL PROCESSING/WASTEWATER/
AQUACULTURE/MARINE
TITANIUM SALT WATER/CHLORINE/CHEMICAL PUMP
DIMENSIONS (MM)
Model d A B H W1 W2
40TM2.25S 40 236 162 360 325 110
40TM2.25 40 236 162 349 310 110
50TM2.4S 50 236 162 360 325 110
50TM2.4 50 236 162 360 325 110
50TM2.75 50 236 162 374 335 110
50TM21.5 50 295 196 435 390 110
80TM22.5 80 311 212 559 500 130
80TM23.7 80 311 212 594 535 130
Materials of Construction
Impeller Glass fibre reinforced resin
Pump casing Glass fibre reinforced resin/ resin
Motor frame Titanium
Shaft Titanium
Replacement power cable for single phase (5m)
s/code List price
TS-00182515 $114
Replacement float sets
Type s/code List price
TMA (2 floats)
1.5kW & under TS-10648416 $201
2.2kW & over TS-10600044 $246
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 27
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Do not operate the pump at the lowest water level longer than 30 minutes (15 minutes on the models with 1.5kW power output).
L.W.L
C.W.L
0 1,000 2,000 Capacity (L/min)
0 400 800 1,200 Capacity (L/min)
MARINE/MINE & PROCESS WASTEWATER
Cast 316 SS guide rail kits for 5.5kW - 11 kW pumps only
Lifting chain 5m (with shackles)
Guide support (with bolts & nuts)
Guide hook (with bolts)
Duckfoot bend
Guide connector (with bolts)
JIS 10kg/cm2 flange
Foundation bolts (with nuts)
2.2.1 SFQ SERIES
The SFQ series are made of 316 cast stainless steel.
They are ideal for draining corrosive liquid in chemical plants. Call for chemical compatibility chart.
Applications
Wastewater & effluent
Seawater & hyper salinity
Chemical transfer - check compatibility
Standard Accessories Free Standing
BSP thread flange (3.7kW & less)
JIS 10kg/cm2 flange with packing, bolts & nuts (5.5kW & above)
Discharge port 50 - 80mm
Side discharge
Semi open type impeller (316 cast stainless steel)
Three phase, 2 pole motors, 0.4 - 11kW
High grade bearings
Corrosion resistant
High carbon grade of 316 stainless steel allows pump to be fully cast .. no welds to corrode
Discharge Port
(mm) Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Max. Solid Handling mm
Cable Length m List Price
Dry Weight kg FREE STANDING
Output kW Phase
Running Amp
50 50SFQ2.4 TUI-SFQ2.4-50 0.4 3-phase 1.16 11.2 275 d.o.l. 20 6 6 $2,687
50 50SFQ2.75 TUI-SFQ2.75-50 0.75 3-phase 2.0 14.2 430 d.o.l. 22 6 6 $3,420
80 80SFQ21.5 TUI-SFQ21.5-80 1.5 3-phase 3.8 20.9 650 d.o.l. 36 6 6 $3,900
80 80SFQ23.7 TUI-SFQ23.7-80 3.7 3-phase 7.3 24.6 1,180 d.o.l. 50 15 6 $7,838
80 80SFQ25.5 TUI-SFQ25.5-80 5.5 3-phase 11.3 30 1,340 d.o.l. 124 18 8 $13,128
80 80SFQ27.5 TUI-SFQ27.5-80 7.5 3-phase 14.3 34.8 2,000 d.o.l. 123 23 8 $18,312
80 80SFQ211 TUI-SFQ211-80 11 3-phase 21.0 44 1,950 d.o.l. 143 23 8 $22,188
Stainless Steel Replacement TOS Guide Kits (note: guide rails not included in kit)
TOS3-80-SFQ TUI-TOS-SFQ Guide rail fitting, suits all 5.5, 7.5 & 11 kW SFQ pumps 8 $3,773
80SFQ211
5 great features ... 5 times the life!
Standard in every Tsurumi SFQ submersible
Anti-wicking cable entry
Twin dual SiC mech seals … 5 times higher corrosion, wear & heat resistance than tungsten carbide
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
1,000 volt option available … p 22
CAST 316 STAINLESS STEEL HIGH FLOW, HIGH HEAD
DIMENSIONS (MM)
Model L H L.W.L C.W.L
50SFQ2.4 252 397 90 355
50SFQ2.75 252 397 90 397
80SFQ21.5 329 484 95 415
80SFQ23.7 359 542 130 552
80SFQ25.5 635 884 190 690
80SFQ27.5 635 884 190 690
80SFQ211 635 892 190 892
TOS80SFQ25.5 808 875
TOS80SFQ27.5 808 875
TOS80SFQ211 808 923
Materials of Construction
Impeller Stainless iron casting SCS14 (DIN GX5CrNiMo19-11-2)
Casing Stainless iron casting SCS14 (DIN GX5CrNiMo19-11-2)
Suction cover Stainless iron casting SCS14 (DIN GX5CrNiMo19-11-2)
Motor frame Stainless iron casting SCS14 (DIN GX5CrNiMo19-11-2)
Shaft Stainless steel SUS316 (EN-X5CrNiMo17-12-2)
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 28
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
2.3.1 UT SERIES
Discharge port 50mm
Cast iron construction
Side discharge
Vortex impeller (glass-fibre reinforced resin)
Single phase, 2 pole motor
Large internal passage for passing solids in suspension
Oil resistant cable
The UT series are cast iron vortex pumps powered by single phase electric motors.
The impeller produces a vortex flow that allows fibrous materials and solid matter to pass through the large passage way. These pumps are ideal for handling sewage or stormwater.
Discharge Port (mm) Model S/code
Motor
Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg
Max. Solid Handling mm
Cable Length m List Price
Output kW Phase
50 50UT2.4S TUI-UT2.4SP 0.4 single 9 270 Capacitor 14 35 5 $396
50 50UT2.75S TUI-UT2.75SP 0.75 single 12.5 440 Capacitor 16 35 5 $470
Automatic
50 50UTZ2.4S TUI-UTZ2.4SP 0.4 single 9 270 Capacitor 14 35 5 $444
50 50UTZ2.75S TUI-UTZ2.75SP 0.75 single 12.5 440 Capacitor 16 35 5 $558
REAL QUALITY … VALUE PACKED PRICES
UTZ Automatic version
UT manual version
Do not operate the pump at the lowest water level (L.W.L) longer than 30 minutes.
PLUMBERS/DRAINERS SINGLE PHASE CAST IRON VORTEX SEPTC TANK PUMPS
Standard in every Tsurumi UT submersible
Anti-wicking cable entry
Mech seals protected in oil chamber with patented OIL LIFTER
Thermal motor protection
V-ring protector for mech seal
Applications
Septic tanks
Stormwater drains
Grease pits
Materials of Construction
Impeller Glass fibre reinforced resin
Pump casing Grey cast iron
Motor frame Grey cast iron
Shaft 403 Stainless steel
EMC certified, ACMA registered
Replacement cables (10m)
Type s/code List price
Manual TS-00100811 $116
Auto TS-00100813 $161
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 29
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 200 400 Capacity (L/min)
0 400 800 Capacity (L/min)
COUNCILS WASTEWATER
Applications Sewage Wastewater Rainwater Standard Accessories Free Standing Stands included Bends ordered separately Screwed flange (1.5kW & less) JIS 10kg/cm2 flange with packing,
bolts & nuts (2.2kW & above) Guide Rail Fitting TOS Lifting chain 5m (with shackles) Guide support (with bolts & nuts) Guide hook (with bolts) Duckfoot bend Guide connector (with bolts) JIS 10kg/cm2 flange with packing,
bolts & nuts Foundation bolts ( with nuts)
The U series are vortex sewage pumps.
The vortex impeller allows fibrous materials and solid matter to be pumped with minimum contact with the impeller. It ensures choke-free sewage pumping.
Discharge port 40 -80mm
Interchange with Flygt
Vortex impeller (cast iron)
Single & three phase, 2 pole motors, 0.25 - 3.7kW
Choke free operation
Automatic option
DIMENSIONS (MM)
Without level control
Model d A A4 D B H W1 W2
40U2.25S 40 241 207 172 107 383 340 100
40U2.25 40 241 207 172 107 383 340 100
50U2.4S 50 236 199 158 102 433 390 105
50U2.4 50 236 199 158 102 400 355 105
50U2.75 50 249 212 172 102 395 365 105
80U2.75 80 383 329 172 173 421 390 130
80U21.5 80 420 366 200 173 501 430 135
80U22.2 80 502 410 240 225 562 490 160
80U23.7 80 502 410 234 226 565 520 160
With level control
Model d A A4 D B H FL1 FL2
40UA2.25S 40 241 207 194 107 433 100 585
50UA2.4S 50 236 199 187 102 450 105 590
2.3.2 U SERIES
Automatic version shown with guide rail option
Guide adaptors allow B, BZ, C, U & UZ series pumps to fit Flygt guide rail system
80-80mm TS-FLAD-TEG-33 $150
Discharge Port (mm)
Suits Flygt Adaptor Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg FREE STANDING
Max. Solid Handling mm
Cable Length m List Price
Output kW Phase
Running Amp
40 40U2.25S* TUI-U2.25SP 0.25 single 2.9 7.4 260 Split phase 14 35 5 $983 40 40U2.25* TUI-U2.25-40 0.25 3-phase 0.7 7.5 260 d.o.l. 13.5 35 6 $900 50 50U2.4S* TUI-U2.4SP 0.4 single 3.4 11 270 Capacitor 20 35 5 $1,063 50 50U2.4* TUI-U2.4-50 0.4 3-phase 1.1 11 270 d.o.l. 19.2 35 6 $931 50 50U2.75* TUI-U2.75-50 0.75 3-phase 2.1 15 270 d.o.l. 22.7 35 6 $1,124 80 TEG-33 80U2.75 TUI-U2.75-80 0.75 3-phase 2.1 12.2 450 d.o.l. 28.5 46 6 $1,236 80 TEG-33 80U21.5 TUI-U21.5-80 1.5 3-phase 3.5 16.5 600 d.o.l. 41.5 46 6 $1,661 80 TEG-33 80U22.2 TUI-U22.2-80 2.2 3-phase 4.9 19 800 d.o.l. 55 56 6 $2,354 80 TEG-33 80U23.7 TUI-U23.7-80 3.7 3-phase 7.7 23.5 1,030 d.o.l. 75 56 6 $3,255
Automatic (two floats) 40UA2.25S TUI-UA2.25SP 0.25 single 2.9 7.4 260 Split phase 14.5 35 5 $1,124 50UA2.4S TUI-UA2.4SP 0.4 single 3.4 11 270 Capacitor 20.5 35 5 $1,277 Discharge bends and stand sets (not required with TOS guide kits)
BEND80 TUI-BEND80 suits all 80mm pump s up to 1.5kW (Oval - BSP screw flange) $137 BEND80-80 TUI-BEND80-80 suits all 80mm pumps from 2.2kW (JIS 10kg/cm2 flange ) $224 * Bend set not required, part of casing, in 40mm & 50mm pumps 0.75kW and under
TOS Guide Kits (note: guide rails not included in kit) TOK4-A TUI-TOK4-A Suits 40mm & 50mm U series pumps except 50U21.5 (2kg) $352 TOS5-50 TUI-TOS5-50 Suits 50U21.5 only (not stocked) $618 TOS3-65-80 TUI-TOS3-65-80 $914 Suits 80mm U series pumps
Bends ordered separately on 80mm pumps
SINGLE & 3 PHASE SEWAGE MANUAL & AUTO
Materials of Construction
Impeller Grey cast iron
Pump casing Grey cast iron
Motor frame Grey cast iron
Shaft Stainless steel 420J2
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 30
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Discharge ports 50 - 800mm (see section 2.4 for larger options)
Side discharge
Channel impeller (cast iron)
Automatic & alternation options
Interchange with Flygt … see table below
2.3.3 B SERIES
Applications Transferring sewage
Draining wastewater
Draining effluent
The B series are available in a huge range of sizes to 800mm.
A channel impeller prevents internal clogging and enables the pump to efficiently transfer sewage and wastewater containing compressible solids. Standard Accessories
Free Standing Bends ordered separately
Stand sets ordered separately for 5.5kW & over models Guide Rail Fitting TOS Lifting chain 5m (with shackles)
Guide support (with bolts & nuts) Guide hook (with bolts) & connector (with bolts) Duckfoot bend
JIS 10kg/cm2 flange (with packing, bolts & nuts) Foundation bolts ( with nuts)
0 1,000 2,000 Capacity (L/min)
100mm 50mm & 80mm
Guide adaptors allow B, BZ, C, U & UZ series pumps to fit Flygt guide rail system
80-80mm TS-FLAD-TEG-33 $150
80-100 mm TS-FLAD-TEG-34 $170
100-100mm TS-FLAD-TEG-44 $190
Automatic version shown with guide rail option
0 500 1,000 Capacity (L/min)
Discharge Port (mm) Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg FREE STANDING
Max. Solid Handling mm
Cable Length m
List Price
Suits Flygt Adaptor
Output kW Type Phase
Running Amp
50 50B2.4 TUI-B2.4-50 0.4 2 pole 3-phase 1.1 9 260 d.o.l. 23 19 6 $1,107 n/a 50 50B2.75 TUI-B2.75-50 0.75 2 pole 3-phase 1.9 12 435 d.o.l. 25 20 5 $1,282 n/a 50 50B2.75S TUI-B2.75SP 0.75 2 pole single 15.2 360 capacitor 32 20 5 $1,796 n/a 50 50B2.75H TUI-B2.75H-50 0.75 2 pole 3-phase 1.9 15.2 360 d.o.l. 24 20 6 $1,282 n/a 80 80B21.5 TUI-B21.5-80 1.5 2 pole 3-phase 3.5 16.8 1,000 d.o.l. 36 40 6 $1,424 TEG-33
100 100B42.2 TUI-B42.2-100 2.2 4 pole 3-phase 5.0 16 1,500 d.o.l. 70 45 6 $2,417 TEG-33/34 100 100B43.7 TUI-B43.7-100 3.7 4 pole 3-phase 7.9 16.4 2,000 d.o.l. 86 53 6 $2,852 TEG-33/34 100 100B43.7H TUI-B43.7H-100 3.7 4 pole 3-phase 7.9 20 1,180 d.o.l. 84 35 6 $2,932 TEG-33/34 100 100B45.5* TUI-B45.5-100 5.5 4 pole 3-phase 12.1 26 2,080 d.o.l. 147 40 8 $4,815 TEG-44 100 100B47.5* TUI-B47.5-100 7.5 4 pole 3-phase 15.9 29.7 2,260 d.o.l. 169 40 8 $5,610 TEG-44
Automatic (two floats) 50 50BA2.75S TUI-BA2.75SP 0.75 2 pole single 15.2 360 capacitor 34 20 6 $1,911 80 80BA21.5 TUI-BA21.5-80 1.5 2 pole 3-phase 3.5 16.8 1,000 d.o.l. 40 40 6 $1,711
100 100BA42.2 TUI-BA42.2-100 2.2 4 pole 3-phase 5 16 1,500 d.o.l. 78 45 6 $3,703 100 100BA43.7 TUI-BA43.7-100 3.7 4 pole 3-phase 7.9 16.4 2,000 d.o.l. 94 53 6 $4,370
Alternation version (three floats) 80 80BW21.5 TUI-BW21.5-80 1.5 2 pole 3-phase 3.5 16.8 1,000 d.o.l. 40 40 6 $2,343
100 100BW42.2 TUI-BW42.2-100 2.2 4 pole 3-phase 5 16 1,500 d.o.l. 78 45 6 $3,694 100 100BW43.7 TUI-BW43.7-100 3.7 4 pole 3-phase 7.9 16.4 2,000 d.o.l. 94 53 6 $4,511
Discharge bends and stand sets (not required with TOS guide kits) BEND50 TUI-BEND50 suits all B series 50mm pumps (Oval - BSP screw flange) $96 BEND80 TUI-BEND80 suits all B series 80mm pumps (Oval - BSP screw flange) $137 BEND80-100 TUI-BEND80-100 suits B series 100mm pumps up to 3.7kW (JIS 10kg/cm2 flange ) $263 BEND100-100 TUI-BEND100-100 suits B series 100mm pumps over 5.5 kW (JIS 10kg/cm2 flange ) $311 *Stand set TUI-STANDSET required for B series 100mm pumps over 5.5kW $123 TOS Guide Kits (note: guide rails not included in kit) Guide rail size (Outside dim) TOS3-50 TUI-TOS3-50 suits all B series 50mm pumps 25mm $618 TOS3-80-80 TUI-TOS3-80-80 suits all B series 80mm pumps 32mm $872 TOS3-80-100 TUI-TOS3-80-100 suits B series 100mm pumps up to 3.7kW 32mm $1,001 TOS3-100-100 TUI-TOS3-100-100 suits B series 100mm pumps over 5.5 kW 50mm $1,566
Bends ordered separately
COUNCILS/ WASTEWATER
3 PHASE, CHANNEL IMPELLER , SEWAGE
Materials of Construction
Impeller Grey cast iron
Pump casing Grey cast iron
Motor frame Grey cast iron
Shaft Stainless steel 420J2
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 31
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
2.3.4 BZ SERIES
The BZ series have single-channel impellers that allow the pumps to handle solids up to 80mm in diameter efficiently.
Applications
Transferring sewage & wastewater
Draining wastewater
Draining effluent
Standard Accessories
Free Standing
Bends ordered separately
Stand sets ordered separately on 5.5kW & over models
Guide Rail Fitting TOS
Lifting chain 5m (with shackles)
Guide support (with bolts & nuts)
Guide hook (with bolts)
Duckfoot bend
Guide connector (with bolts)
JIS 10kg/cm2 flange (with packing, bolts & nuts)
Foundation bolts ( with nuts)
Discharge port 80 - 100mm
Side discharge
Channel impeller (cast iron)
Three phase, 4 pole motors, 1.5 - 15kW
Interchange with Flygt .. See table below
Discharge Port (mm) Model S/code
Motor
Head max. m
Capacity max. l/min
Starting Method
Dry Weight Kg FREE STANDING
Max. Solid Handling mm
Cable Length m List Price
Suits Flygt Adaptor
Output kW Phase
Running Amp
80 80BZ41.5 TUI-BZ41.5-80 1.5 3-phase 4.0 9.1 1,480 d.o.l. 78 80 10 $3,414 TEG-33
100 100BZ42.2 TUI-BZ42.2-100 2.2 3-phase 5.3 11.3 1,800 d.o.l. 80 80 10 $3,367 TEG-33/34
100 100BZ43.7 TUI-BZ43.7-100 3.7 3-phase 7.9 15.8 2,220 d.o.l. 100 80 10 $3,985 TEG-33/34
100 100BZ45.5* TUI-BZ45.5-100 5.5 3-phase 12.1 18 2,630 d.o.l. 175 80 10 $6,675 TEG-44
100 100BZ47.5* TUI-BZ47.5-100 7.5 3-phase 15.9 23 2,960 d.o.l. 194 80 10 $7,188 TEG-44
100 100BZ411H* TUI-BZ411H-100 11 3-phase 23.8 30 2,810 Star-Delta 219 80 10 $9,232 TEG-44
100 100BZ411* TUI-BZ411-100 11 3-phase 23.8 26 3,570 Star-Delta 219 80 10 $9,171 TEG-44
100 100BZ415* TUI-BZ415-100 15 3-phase 35 3,500 Star-Delta 295 80 10 $15,900
With Guide Rail Fitting (*Dry weight of guide rail fitting excluding ductfoot bend)
100 TOS100BZ415 TUI-BZ415-100TO 15 three 35 3500 Star-Delta *290 80 10 $17,400
Discharge bends and stand sets (not required with TOS guide kits)
BEND80-80 TUI-BEND80-80 suits all BZ series 80mm pumps (JIS 10kg/cm2 flange ) $224
BEND80-100 TUI-BEND80-100 suits BZ series 100mm pumps up to 3.7kW (JIS 10kg/cm2 flange ) $263
BEND100-100 TUI-BEND100-100 suits BZ series 100mm pumps over 5.5 kW (JIS 10kg/cm2 flange ) $311
*Stand set TUI-STANDSET required for BZ series 100mm pumps over 5.5kW $123
TOS Guide Kits (note: guide rails not included in kit)
TOS3-80-80 TUI-TOS3-80-80 suits all BZ series 80mm pumps $872
TOS3-80-100 TUI-TOS3-80-100 suits BZ series 100mm pumps up to 3.7kW $1,001
TOS3-100-100 TUI-TOS3-100-100 suits BZ series 100mm pumps over 5.5 kW $1,566
Guide adaptors allow B, BZ, C, U & UZ series pumps to fit Flygt guide rail system
80-80mm TS-FLAD-TEG-33 $150
80-100 mm TS-FLAD-TEG-34 $170
100-100mm TS-FLAD-TEG-44 $190
DIMENSIONS (MM)
Model d A A1 A2 A3 B D D1 D2 W1 W2 H
80BZ41.5 80 523 302 129 190 303 273 133 140 590 235 631 100BZ42.2 100 551 317 129 190 328 273 133 140 590 235 631 100BZ43.7 100 584 327 153 200 328 289 139 150 640 235 681 100BZ45.5 100 716 407 204 280 380 421 205 216 790 305 925 100BZ47.5 100 716 407 204 280 380 421 205 216 820 305 946 100BZ411H 100 727 407 215 280 377 431 205 226 865 330 1023 100BZ411 100 727 407 215 280 377 431 205 226 865 330 1023
0 2,000 4,000 Capacity (L/min)
0 800 1,600 Capacity (L/min)
Do not operate the pump at the lowest water level (L.W.L.) longer than 30 minutes
Bends ordered separately
COUNCILS/ WASTEWATER
3 PHASE, 4 POLE, SINGLE CHANNEL IMPELLER
Materials of Construction
Impeller Grey cast iron
Pump casing Grey cast iron
Motor frame Grey cast iron
Shaft SUS420J2 (EN-X30Cr13)
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 32
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
2.3.5 NEW UNIVERSAL NHB SERIES SEWAGE PUMPS
SEWAGE STATIONS NEW RANGE CHANNEL IMPELLER LOWER COST, 4” - 12”
0 300 600 900 Capacity (L/min)
0 400 800 1200 Capacity (L/min)
0 400 800 1200 Capacity (L/min)
0 400 800 1200 Capacity (L/min)
Discharge ports 100 - 300mm
Side discharge
Shrouded channel impeller (cast iron) prevents internal clogging
4 pole motors to 75kW
Applications Transferring raw sewage
Solids contaminated wastewater
The NHB series, available up to 12” discharge bore, are designed for stable pump performance over long periods of time with improved maintainability and durability.
A shrouded channel impeller with axial gap structure prevents performance drop, cavitation & clogging due to ingested foreign material.
Standard Accessories Free Standing Bends & TO kits ordered separately Guide Rail Fitting TOS Lifting chain 5m (with shackles)
Guide support (with bolts & nuts) Guide hook (with bolts) & connector
(with bolts)
Duckfoot bend JIS 10kg/cm2 flange (with packing, bolts &
nuts)
Foundation bolts ( with nuts)
Guide adaptors allow NHB series pumps to fit Flygt guide rail system
100-100mm TS-FLAD-TEG-44 $190
Bends ordered separately
Materials of Construction
Impeller Grey cast iron
Pump casing Grey cast iron
Motor frame Grey cast iron
Shaft Stainless steel 420
0 800 1600 2400 Capacity (L/min)
TO150NHB455
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 33
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
2.3.5 UNIVERSAL NHB SERIES SEWAGE PUMPS CONTINUED
SEWAGE STATIONS NEW RANGE CHANNEL IMPELLER LOWER COST, 4” - 12”
Bore (mm)
Model S/code Head max. m
Capacity max. l/min
Starting Method
Dimensions LxH mm Dry Weight kg* Solids Passage mm
Cable Length m
List Price
Motor Output kW Free
Standing Guide Rail Fitting
Free standing
Guide Rail fitting
100 100NHB45.5 TUI-NHB45.5-100 5.5 22 2300 DOL 689 x 908 905 x 906 145 132 40 6 $3,303
100 100NHB47.5 TUI-NHB47.5-100 7.5 25 2500 DOL 689 x 929 905 x 927 158 145 40 6 $3,634
150 150NHB47.5L TUI-NHB47.5L-150 7.5 15.5 4800 DOL 858 x 1085 1065 x 1030 221 192 60 6 $3,901
150 150NHB411 TUI-NHB411-150 11 23.5 4800 Star Delta 882 x 1097 1089 x 1052 243 213 75 8 $6,964
150 150NHB415 TUI-NHB415-150 15 28 4500 Star Delta 882 x 1167 1089 x 1122 259 234 75 8 $7,765
150 150NHB422 TUI-NHB422-150 22 25.7 7500 Star Delta 884 x 1282 1092 x 1241 347 317 75 8 $10,543
150 150NHB437 TUI-NHB437-150 37 41.6 6800 Star Delta 1072 x 1567 1305 x 1399 547 486 40x50 8 $17,526
150 150NHB455 TUI-NHB455-150 55 56.5 7900 Star Delta 1120 x 1663 1391 x 1557 877 838 35x110 8 $29,155
200 200NHB411 TUI-NHB411-200 11 16.6 6400 Star Delta 947 x 1113 1257 x 1078 262 257 68x60 8 $7,480
200 200NHB415 TUI-NHB415-200 15 20 8300 Star Delta 925 x 1184 1235 x 1144 287 282 70x60 8 $8,216
200 200NHB437 TUI-NHB437-200 37 40 9,000 Star Delta 1191 x 1590 1429 x 1477 562 503 40x77 8 $19,679
200 200NHB455 TUI-NHB455-200 55 42 10,000 Star Delta 1189 x 1663 1470 x 1627 912 875 40x70 8 $30,406
200 200NHB475 TUI-NHB475-200 75 51 10,000 Star Delta 1189 x 1663 1470 x 1627 992 955 35x75 8 $42,062
250 250NHB430 TUI-NHB430-250 30 30.3 10,000 Star Delta 1296 x 1517 1567 x 1450 551 473 75x55 8 $16,560
250 250NHB437 TUI-NHB437-250 37 31 12,500 Star Delta 1296 x 1594 1567 x 1527 611 533 62x80 8 $22,319
250 250NHB445 TUI-NHB445-250 45 45.2 9,600 Star Delta 1314 x 1556 1581 x 1497 711 620 45x70 8 $25,410
250 250NHB475 TUI-NHB475-250 75 40.5 12,000 Star Delta 1384 x 1663 1702 x 1656 1050 995 60x80 8 $43,590
300 300NHB445 TUI-NHB445-300 45 34.5 13,500 Star Delta 1349 x 1605 1673 x 1586 775 695 60x90 8 $27,158
Discharge bends and stand sets (not required with TOS guide kits)
100 BEND100-100 TUI-NH-B-100-100 DIN PN6 (4” x 4”) $294
150 BEND150-150 TUI-NH-B-150-150 DIN PN6 (6” x 6”) $469
200 BEND200-200 TUI-NH-B-200-200 DIN PN6 (8” x 8”) $800
250 BEND250-250 TUI-NH-B-250-250 DIN PN6 (10” x 10”) $1,067
300 BEND300-300 TUI-NH-B-300-300 DIN PN6 (12” x 12”) $1,408
TOS Guide Kits (note: guide rails not included in kit)
150 TOS-150-150 TUI-NHTOS150-150 DIN PN6 (6” x 6”) up to 22kW $1,638
150 TO-150-150 TUI-NHTO-150-150 DIN PN6 (6” x 6”) over 22kW $2,926
200 TO-200-200 TUI-NHTO-200-200 DIN PN6 (8” x 8”) $3,376
250 TO-250-250 TUI-NHTO-250-250 DIN PN6 (10” x 10”) $4,241
300 TO-300-300 TUI-NHTO-300-300 DIN PN6 (12” x 12”) $5,750
DIMENSIONS (MM)
Model d A A3 B D H W1 W2
100NHB45.5 100 689 390 372 410 908 682 302
100NHB47.5 100 689 390 372 410 929 699 302
150NHB47.5L 150 858 497 545 486 1085 855 455
150NHB411 150 882 507 535 490 1097 858 475
150NHB415 150 882 507 535 490 1167 925 478
150NHB422 150 884 507 530 492 1281 980 440
150NHB437 150 1072 577 658 724 1567 1210 569
150NHB455 150 1120 637 597 726 1663 577 -
200NHB411 200 947 554 545 485 1113 874 445
200NHB415 200 925 544 550 472 1184 942 465
200NHB437 200 1191 664 673 724 1590 1233 583
200NHB455 200 1189 674 596 726 1663 577 -
200NHB475 200 1189 674 596 726 1663 577 -
250NHB430 250 1296 734 750 724 1517 1185 580
250NHB437 250 1296 734 750 724 1594 1237 593
250NHB445 250 1314 724 692 760 1556 1171 530
250NHB475 250 1384 834 690 750 1663 577 -
300NHB455 250 1349 764 780 724 1605 1219 589 weight excluding cable, weights of guide rail fitting exclude duckfoot bend
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 34
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
DIMENSIONS (MM) Model d A A4 D B H W1 W2
50C2.75 50 405 351 250 196 415 385 145
80C21.5 80 446 392 250 234 536 465 190
100C42.2 100 594 489 324 328 616 570 225
100C43.7 100 602 497 331 333 680 635 235
100C45.5 100 687 582 400 372 824 700 335
100C47.5 100 687 582 400 372 814 720 335
100C411 100 710 605 431 372 1000 840 300
Discharge port 50 - 100mm
Interchange with Flygt … see table below
Channel impeller (cast iron) with cutter mechanism
Three phase, 2 & 4 pole motors, 0.75 - 11kW
Automatic & alternation options
2.3.6 C SERIES
Applications Sewage
Wastewater
Effluent
Standard Accessories Free Standing Bends ordered separately Stand sets ordered separately on
5.5kW & over models
Guide Rail Fitting TOS Lifting chain 5m (with shackles) Guide support (with bolts & nuts) Guide hook (with bolts) Duckfoot bend Guide connector (with bolts) JIS 10kg/cm2 flange Foundation bolts ( with nuts)
The C series of sewage pumps incorporate a channel impeller with cutter mechanism. A sintered tungsten carbide alloy tip is brazed on the impeller vane and rotates against the serrated edge of the suction cover. This mechanism cuts fibrous matter that flows into the pump with ease.
0 1,000 2,000 3,000 Capacity (L/min)
For online demo search Tsurumi cutter pump or click on You Tube image above
Automatic version shown with guide
rail option
0 500 1,000 Capacity (L/min)
Guide adaptors allow B, BZ, C, U & UZ series pumps to fit Flygt guide rail system
80mm TS-FLAD-TEG-33 $150
80-100 mm TS-FLAD-TEG-34 $170
100mm TS-FLAD-TEG-44 $190
DESIGNED TO LAST …. features detailed page 4
Discharge Port (mm)
Suits Flygt Adaptor Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Dry Weight KG
Max. Solid Handling mm
Cable Length m List Price
Output kW Type Phase
Running Amp
50 n/a 50C2.75S TUI-C2.75SP 0.75 2 pole single 11.5 335 capacitor 32 21 5 $1,800 50 n/a 50C2.75 TUI-C2.75-50 0.75 2 pole 3-phase 1.9 11.5 335 d.o.l. 24 21 6 $1,282 80 TEG-33 80C21.5 TUI-C21.5-80 1.5 2 pole 3-phase 3.5 13.2 810 d.o.l. 36 37 6 $1,341
100 TEG-33/34 100C42.2 TUI-C42.2-100 2.2 4 pole 3-phase 5.0 13.5 1,100 d.o.l. 70 44 6 $2,564 100 TEG-33/34 100C43.7 TUI-C43.7-100 3.7 4 pole 3-phase 7.9 16 1,700 d.o.l. 86 60 6 $3,039 100 TEG-44 100C45.5* TUI-C45.5-100 5.5 4 pole 3-phase 12.1 18.1 2,290 d.o.l. 140 40 8 $5,410 100 TEG-44 100C47.5* TUI-C47.5-100 7.5 4 pole 3-phase 15.9 23 2,500 d.o.l. 159 40 8 $5,488 100 TEG-44 100C411* TUI-C411-100 11 4 pole 3-phase 23.8 26 2,750 Star-Delta 184 50 8 $8,288
Automatic (two floats) 50 50CA2.75S TUI-CA2.75SP 0.75 2 pole single 11.5 335 capacitor 34 21 5 $2,350 50 50CA2.75 TUI-CA2.75-50 0.75 2 pole 3-phase 1.9 11.5 335 d.o.l. 25 21 6 $1,659 80 80CA21.5 TUI-CA21.5-80 1.5 2 pole 3-phase 3.5 13.2 810 d.o.l. 40 37 6 $1,760
Alternation version (three floats) 50 50CW2.75 TUI-CW2.75-50 0.75 2 pole 3-phase 1.9 11.5 335 d.o.l. 25 21 6 $1,788 80 80CW21.5 TUI-CW21.5-80 1.5 2 pole 3-phase 3.5 13.2 810 d.o.l. 40 37 6 $1,886
Discharge bends and stand sets (not required with TOS guide kits) BEND50 TUI-BEND50 suits all C series 50mm pumps (Oval - BSP screw flange) $96 BEND80 TUI-BEND80 suits C series 80mm pumps 1.5kW (Oval - BSP screw flange) $137 BEND80-80 TUI-BEND80-80 suits C series 80mm pumps 2.2kW & over (CR series) (JIS 10kg/cm2 flange ) $224 BEND80-100 TUI-BEND80-100 suits C series 100mm pumps up to 3.7kW (JIS 10kg/cm2 flange ) $263 BEND100-100 TUI-BEND100-100 suits C series 100mm pumps 5.5 kW & over (JIS 10kg/cm2 flange ) $311 *Stand set TUI-STANDSET required for C series 100mm pumps 5.5kW to 11kW $123
TOS Guide Kits (note: guide rails not included in kit) Guide rail size (Outside dim)
TOS3-50 TUI-TOS3-50 25mm $618 suits all C series 50mm pumps TOS3-80-80 TUI-TOS3-80-80 suits all C series 80mm pumps 1.5kW 32mm $872 TOS3-80-100 TUI-TOS3-80-100 suits C series 100mm pumps up to 3.7kW 32mm $1,001 TOS3-100-100 TUI-TOS3-100-100 suits C series 100mm pumps 5.5 kW & over 50mm $1,566
Do not operate the pump at the lowest water level (L.W.L.) longer than 30 minutes
Bends ordered separately
COUNCILS/ WASTEWATER
SINGLE & 3 PHASE CUTTER PUMPS, MANUAL & AUTO
Materials of Construction
Impeller Grey cast iron with sintered tungsten carbide alloy tip
Pump casing Grey cast iron
Suction cover Ductile iron casting
Motor frame Grey cast iron
Shaft Stainless steel SUS403 (EN-X6Cr13)
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 35
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Discharge Port (mm) Model S/code
Motor Output kW
Head max. m
Capacity max. l/min
Starting Method
Dimensions L x H mm Dry Weight KG Cable Length
m List Price Free
standing Guide Rail Fitting
Free standing
Guide Rail Fitting
50 50NHC21.5 TUI-NHC21.5-50 1.5 19.5 430 DOL 10 451 x 468 633 x 534 41 37 10 $1,173
50 50NHC22.2 TUI-NHC22.2-50 2.2 23.6 550 DOL 12 451 x 510 633 x 569 44 39 10 $1,969
50 50NHC23.7 TUI-NHC23.7-50 3.7 31.5 660 DOL 20 513 x 557 695 x 611 56 52 10 $2,585
80 80NHC22.2 TUI-NHC22.2-80 2.2 22 660 DOL 22 517 x 577 691 x 604 55 48 10 $2,180
80 80NHC23.7 TUI-NHC23.7-80 3.7 28 1000 DOL 22 517 x 610 691 x 637 67 60 10 $2,935
80 80NHC25.5 TUI-NHC25.5-80 5.5 30.4 1330 DOL 23 615 x 879 788 x 877 115 102 10 $3,846
80 80NHC27.5 TUI-NHC27.5-80 7.5 39 1410 DOL 26 615 x 879 788 x 877 128 115 10 $4,876
80 80NHC211 TUI-NHC211-80 11 49 1080 Star Delta 26 615 x 927 788 x 925 154 141 10 $6,670
Stand included
Discharge bends and stand sets (not required with TOS guide kits) BEND50 TUI-BEND50 suits all C series 50mm pumps (Oval - BSP screw flange) $96 BEND80 TUI-BEND80 suits C series 80mm pumps 1.5kW (Oval - BSP screw flange) $137 BEND80-80 TUI-BEND-80-80 suits C series 80mm pumps 2.2kW & over (CR series) (JIS 10kg/cm2 flange ) $224
TOS Guide Kits (note: guide rails not included in kit) Guide rail size (Outside dim)
TOS3-50 TUI-TOS3-50 suits all C series 50mm pumps 25mm $618 TOS3-80-80 TUI-TOS3-80-80 suits all C series 80mm pumps 1.5kW $872 32mm
COUNCILS/ WASTEWATER
NEW RANGE HIGH HEAD, LOWER COST CUTTER PUMPS
2.3.7 NEW UNIVERSAL NHC SERIES … HIGH HEAD CUTTER PUMPS
DIMENSIONS (MM)
Model d A A3 B D H W1 W2
50NHC21.5 50 451 254 174 238 468 335 155
50NHC22.2 50 451 254 181 238 510 397 162
50NHC23.7 50 513 296 185 278 557 430 166
80NHC22.2 80 517 302 292 259 577 464 194
80NHC23.7 80 517 302 292 259 610 484 194
80NHC25.5 80 615 362 320 346 879 607 237
80NHC27.5 80 615 362 320 346 879 607 237
80NHC211 80 615 362 320 346 927 672 252
300 600 Capacity (L/min)
Discharge port 50 - 80mm
Channel impeller (cast iron) with cutter mechanism
Three phase, 2 pole motors, 1.5 - 11kW
Guide rail option
The NHC series of sewage pumps incorporate a channel impeller with cutter mechanism.
Two tungsten carbide alloy edges are brazed on the impeller vane. These slice against the serrated edge of the suction cover. This mechanism chops oversized fibrous matter that flows into the pump with ease.
Applications
Raw sewage
Wastewater
Effluent
Standard Accessories Free Standing
Bends ordered separately
Stand sets ordered
separately on 5.5kW & over models
Guide Rail Fitting TOS
Lifting chain 5m (with
shackles)
Guide support (with bolts
& nuts)
Guide hook (with bolts)
Duckfoot bend
Guide connector (with
bolts)
JIS 10kg/cm2 flange
Foundation bolts ( with
nuts)
Automatic version shown with guide
rail option
Bends ordered separately
Materials of Construction
Impeller Grey cast iron with sintered tungsten carbide alloy tip
Pump casing Grey cast iron
Suction cover Ductile iron casting
Motor frame Grey cast iron
Shaft Stainless steel SUS403 (EN-X6Cr13)
0 400 800 1200 Capacity (L/min)
* weight excluding cable, weights of guide rail fitting exclude duckfoot bend
IND
US
TR
IAL
P
UM
PS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 36
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
0 100 200 300 Capacity (L/min)
2.3.8 MG SERIES
The MG series has a hi chrome grinding mechanism in its suction port that chops incoming solids into small pieces. This enables the pump to transfer sewage via a small diameter pipe without the fear of clogging.
Applications Residential sewage transfer in
pressurised system
Draining wastewater
Standard Accessories Free Standing
Discharge bend (with packing & bolts)
Screwed flange (1.5kW & less)
JIS 10kg/cm2 flange with packing, bolts & nuts (2.2kW & above)
Guide Rail Fitting TOS
Lifting chain 5m (with shackles)
Guide support (with bolts & nuts)
Guide hook (with bolts)
Duckfoot bend
Guide connector (with bolts)
JIS 10kg/cm2 flange with packing, bolts & nuts
Foundation bolts ( with nuts)
Discharge port 32 - 50mm
Side discharge
Vortex impeller (cast iron)
Three phase, high torque 2 pole motors, 1 - 3.7kW
Hi chrome rotating grinder mechanism
Interchange with Grundfos … see table below
Discharge Port (mm) Model S/code
Motor Head max. m
Capacity max. l/min
Starting Method
Dry Weight kg FREE STANDING
Cable Length m
List Price
Dimensions lxwxh mm
Output kW Phase
Running Amp
32 32MG21.5 TUI-MG21.5-32 1.5 3-phase 3.9 25 145 d.o.l. 36 6 $1,714 360x217x558
50 50MG22.2 TUI-MG22.2-50 2.2 3-phase 5.5 25 320 d.o.l. 77 6 $2,712 438x226x594
50 50MG23.7 TUI-MG23.7-50 3.7 3-phase 7.8 35 320 d.o.l. 78 6 $2,761 438x226x594
With guide rail kit (note: suit 25mm guide rails, not included in kit)
32 TOS32MG21.5 TUI-MG21.5-32TO 1.5 3-phase 3.9 25 145 d.o.l. 48 6 $2,040 483x217x562
50 TOS50MG22.2 TUI-MG22.2-50TO 2.2 3-phase 5.5 25 320 d.o.l. 86 6 $3,128 620x226x627
50 TOS50MG23.7 TUI-MG23.7-50TO 3.7 3-phase 7.8 35 320 d.o.l. 87 6 $3,233 620x226x627
Replacement TOS Guide Kits (note: guide rails not included in kit)
TOS32 TUI-TOS32 Guide rail fitting, suits all 32mm MG series pumps 13 $728
TOSH-50 TUI-TOSH-50 13 $771 Guide rail fitting, suits all 50mm MG series pumps
Guide adaptors allow MG series pumps to fit Grundfos SEG series guide rail kit
$250 TS-GRAD-SEG50
DESIGNED TO LAST …. features detailed page 4
Bends included
COUNCILS/ WASTEWATER
3 PHASE GRINDERS 2 POLE, HIGH HEAD
Materials of Construction
Impeller Grey cast iron with chromium iron blades & grinder mechanism
Pump casing Grey cast iron
Suction cover Ductile iron casting
Motor frame Grey cast iron
Shaft Stainless steel 403
IND
US
TR
IAL
PU
MP
S
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 37
Global Leader
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
FLYGT/GRUNDFOS ADAPTORS … CHANGE OUT & SAVE
DIMENSIONS (MM) Model d A B B1 D W1 W2 H H1
32MG21.5 32 360 201 90 217 485 160 558 -
50MG22.2 50 438 206 - 226 550 180 594 -
50MG23.7 50 438 206 - 226 550 180 594 -
TOS32MG21.5 - 367 - - 216 490 160 562 -
TOS50MG22.2 - 367 - - 226 580 210 627 847
TOS50MG23.7 - 367 - - 226 580 210 627 847
Flygt
Guide adaptors allow B, BZ, C, U & UZ series pumps to be fitted to Flygt guide rail systems
80-80mm TS-FLAD-TEG-33 $150
80-100 mm TS-FLAD-TEG-34 $170
100-100mm TS-FLAD-TEG-44 $190
Grundfos
Guide adaptors allow MG series pumps to be fitted to Grundfos SEG series guide rail kit
TS-GRAD-SEG50 $250
Do not operate the pump at the lowest water level (L.W.L.) longer than 30 minutes.
Fit Tsurumi pumps to existing Flygt or Grundfos rail system with these adaptors … IT’S EASY
SEWAGE STATIONS
2.3.8 MG SERIES CONTINUED
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 38 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
3.1 PRE-TREATMENT EQUIPMENT (AERATION & MIXING EQUIPMENT)
The TRN series are self-aspirating, submersible aerators. A built-in special semi-open impeller (cast 410 stainless steel) draws in air which is mixed with the liquid and discharged at high pressure. This innovative design leads to highly efficient aeration.
Easy and low cost installation makes these super reliable aerators real cost cutters.
3.1.1 TRN Series … self aspirating aerator
Air-inlet Port mm Model S/code
Motor Output kW Phase
Starting Method
Speed (S.S.)
Max. Solid Handling mm
Water Depth m
No. of outlets
Dry Weight kg Free Standing
Cable Length m List Price
32 32TRN2.75 TUT-TRN2.75-32 0.75 3-phase d.o.l. 3000 10 3.5 6 55 6 $4,748
32 32TRN21.5 TUT-TRN21.5-32 1.5 3-phase d.o.l. 3000 12 3.5 6 55 6 $4,956
50 50TRN42.2 TUT-TRN42.2-50 2.2 3-phase d.o.l. 1500 12 3.6 6 140 6 $9,209
50 50TRN43.7 TUT-TRN43.7-50 3.7 3-phase d.o.l. 1500 12 4 6 150 6 $9,964
50 50TRN45.5 TUT-TRN45.5-50 5.5 3-phase d.o.l. 1500 15 4 6 170 8 $10,806
80 80TRN47.5 TUT-TRN47.5-80 7.5 3-phase d.o.l.. 1500 15 4.5 6 190 8 $13,403
80 80TRN412 TUT-TRN412-80 12 3-phase star delta 1500 15 6 6 200 8 $16,270
80 80TRN417 TUT-TRN417-80 17 3-phase star delta 1500 15 6 6 220 8 $20,862
100 100TRN424 TUT-TRN424-100 24 3-phase star delta 1500 22 6 8 460 10 $38,610
150 150TRN440 TUT-TRN440-150 40 3-phase star delta 1500 25 6 8 635 10 $60,640
Wastewater Treatment Selection Guide … call for your copy
For online demo search Tsurumi Aerator or click on You Tube image above
Easy to install & maintain, efficient to run
WASTEWATER TREATMENT
COST EFFECTIVE, EFFICIENT AERATORS
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 39 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Table 2: Ejector unit & accessories - includes air inlet casing, diffuser, valve, silencer, & lifting chain
3.1 PRE-TREATMENT EQUIPMENT (AERATION & MIXING EQUIPMENT)
The BER series is a submersible ejector comprising a B series sewage pump and a venturi-jet pump. Air is drawn in, mixed with the liquid and discharged through the diffuser
The powerful discharge jet causes vertical convection stirring.
It’s easy, cost effective and it works.
3.1.2 BER Series … ejector
Discharge Port mm Model S/code
Motor Output KW Phase
Starting Method Speed
Max. Solid Handling mm
Max. Water Depth m
Dry Weight kg
Cable Length m List Price
25 8-BER TUT-8-BER 0.75 3-phase d.o.l. 3000 20 4/3.5 28 6 $1,831
32 15-BER TUT-15-BER 1.5 3-phase d.o.l. 3000 20 4 43 6 $2,216
50 22-BER TUT-22-BER 2.2 3-phase d.o.l. 1500 35 4.5 75 6 $3,599
50 37-BER TUT-37-BER 3.7 3-phase d.o.l. 1500 35 5 91 6 $4,488
50 55-BER TUT-55-BER 5.5 3-phase d.o.l. 1500 35 6 149 8 $6,811
Basic submersible unit - does not include silencer, valve kit & 5m lifting chain or ejector accessories.
For complete unit select ejector pump from table 1 and either ejector (diffuser on side of pump) or TOS ejector (diffuser with guide rail kit) from table 2.
Table 1: BER series ejector pump (no accessories)
Air-inlet Port mm Model S/code List Price
25 EJECTOR 8 TUT-EJECTOR8 $1,207
32 EJECTOR 15 TUT-EJECTOR15 $1,531
50 EJECTOR 22/37 TUT-EJECT22/37 $2,188
50 EJECTOR 55 TUT-EJECTOR55 $2,501
With guide rail kit (guide rail not included)
25 TOS-EJECTOR 8 TUT-TOS-EJECT8 $1,877
32 TOS-EJECTOR 15 TUT-TOS-EJECT15 $2,251
50 TOS-EJECTOR 22/37 TUT-TOS-EJ22/37 $3,440
50 TOS-EJECTOR 55 TUT-TOS-EJECT55 $3,877
Wastewater Treatment Selection Guide … call for your copy
WASTEWATER TREATMENT EJECTOR SYSTEMS EASY AERATION
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 40 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
3.1 PRE-TREATMENT EQUIPMENT (AERATION & MIXING EQUIPMENT)
3.1.3 RSR-KS Series … rotary air blower
The RSR series are rotary air blowers with a three-blade spur rotor.
This rotor is designed for corrosion resistance, heat resistance and durability as well as low noise, low vibration, ease of maintenance and high efficiency. It provides stable performance, and ensures smooth operation of the blower over a long period of time.
The RSR-KS series comprises of air-cooled (discharge bore diameter: 50 to 300 mm) and water-cooled blowers (discharge bore diameter: 80 to 350 mm). Whether used under low pressure (0.6 kg/cm2
or less) or high pressure (0.6 to 0.8 kg/cm2), the appropriate model can be selected according to application. Use at 0.8 kg/cm2 or higher pressure is available as a special specification.
The RSR-KS series is suited for various applications, such as for aeration at wastewater treatment facilities, agitation of wastewater and sewage, decomposition and scum prevention, and oxygen supply at fish farms.
PNEUMATIC CONVEYANCE
The Selection Chart indicates the relationships between blower model, bores, revolutions, discharge pressures, actual air flow rates, and the shaft powers.
1. The amount of air indicated in the Selection Chart represents the suction amount under the following standard conditions:
temperature 20°C
absolute pressure 101.3kPa
relative humidity 70%.
2. The amount of air under reference conditions (0°C, absolute pressure 101.3kPa, dry) can be converted to amounts of air under standard suction conditions by the formula below if the suction pressures are the same:
Qs = Qn × 273 + ts 273 where
Qs, amount of air (m3/min) under standard suction conditions indicated on the Selection Chart;
Qn, amount of air (m3/min) under reference suction conditions; Suction pressure is ambient pressure, 101.3kPa;
ts, suction temperature in °C
3. To convert amounts of air under discharge conditions to amounts of air under standard suction conditions indicated on the Selection Chart, use the following formula:
Qs = Qd × 101.3 + Pd x 273 + ts 101.3 273 + td
Qd, amount of air (m3/min.) under discharge conditions;
Pd, discharge pressure (kPa)
ts, suction temperature in °C
td, discharge temperature in °C
4. Using the amount of air and the necessary discharge pressure obtained from the above calculations, determine your blower model, bore, revolution, and shaft power referring to the Selection Chart.
5. Your selectable range can overlap several models. It is recommended that one with a smaller model number be selected for cost economy, or one with a larger model number be selected for lower noise.
6. For necessary motor output, refer to required power (La) in the Selection Chart.
Selection Chart … RSR—KS air cooled type
See over page for standard inclusions
Model (Discharge Bore in mm )
Speed (rpm)
Suction air volume at standard condition (Qs in m3/min) and required power (La in kW)
List price
0.1kg/cm2
(9.8kPa) 0.2kg/cm2 (19.6kPa)
0.3kg/cm2 (29.4kPa)
0.4kg/cm2 (39.2kPa)
0.5kg/cm2 (49.0kPa)
0.6kg/cm2 (58.8kPa)
Qs La Qs La Qs La Qs La Qs La Qs La
RSR2 -50KS (50)
1240 1.46 0.74 1.26 1.07 1.12 1.37 0.99 1.68 0.86 2.02 0.72 2.32
$2,513 1450 1.79 0.87 1.58 1.23 1.42 1.58 1.27 1.94 1.12 2.31 1.00 2.68
1750 2.25 1.02 2.03 1.48 1.87 1.95 1.72 2.41 1.57 2.88 1.45 3.34
2100 2.84 1.24 2.58 1.82 2.40 2.39 2.23 2.98 2.05 3.57 1.91 4.16
RSR2 -65KS (65)
1240 1.90 0.97 1.66 1.36 1.46 1.70 1.27 2.06 1.12 2.39 0.96 2.63
$3,086 1450 2.35 1.10 2.08 1.57 1.84 1.98 1.63 2.44 1.46 2.86 1.34 3.36
1750 3.04 1.35 2.70 1.93 2.46 2.51 2.25 3.19 2.07 3.85 1.92 4.60
2100 3.81 1.62 3.40 2.32 3.11 3.03 2.86 3.87 2.64 4.68 2.48 5.65
RSR2 -80KS (80)
1150 3.72 1.45 3.31 2.16 2.96 2.74 2.67 3.31 2.37 3.76 2.14 4.19
$3,978 1450 5.09 1.79 4.68 2.75 4.33 3.60 4.04 4.50 3.75 5.36 3.52 6.20
1750 6.46 2.09 6.05 3.27 5.70 4.36 5.41 5.55 5.12 6.73 4.88 7.91
2100 8.14 2.51 7.64 3.94 7.22 5.27 6.88 6.71 6.53 8.17 6.24 9.63
RSR2 -100KS (100)
1150 5.01 1.82 4.60 2.82 4.25 3.73 3.94 4.73 3.67 5.73 3.43 6.73
$4,163 1450 6.71 2.18 6.31 3.45 5.96 4.64 5.65 5.82 5.37 7.09 5.13 8.36
1750 8.41 2.55 8.01 4.09 7.66 5.64 7.35 7.18 7.07 8.64 6.83 10.18
2100 10.57 3.05 10.09 4.91 9.67 6.78 9.30 8.69 8.96 10.43 8.67 12.31
RSR2 -125KS (125)
1180 8.22 2.59 7.74 4.17 7.31 5.75 6.94 7.33 6.70 8.92 6.40 10.50
$6,633 1470 10.78 3.32 10.27 5.38 9.89 7.44 9.51 9.51 9.19 11.63 8.94 13.96
1750 13.13 3.98 12.63 6.43 12.26 8.88 11.88 11.33 11.57 13.98 11.32 16.63
1960 15.16 4.45 14.65 7.19 14.29 9.99 13.92 12.81 13.62 15.88 13.39 18.98
RSR2 -125LKS (125)
1180 13.29 3.90 12.50 6.27 11.81 8.65 11.22 11.02 10.83 13.40 10.33 15.77
$8,538 1470 17.23 4.89 16.42 7.92 15.82 10.95 15.21 13.98 14.70 17.11 14.29 20.53
1750 21.00 5.85 20.20 9.45 19.60 13.06 19.00 16.67 18.50 20.57 18.10 24.46
1960 23.99 6.55 23.19 10.59 22.61 14.70 22.02 18.85 21.55 23.37 21.18 27.93
RSR2 -150KS (150)
1180 16.13 4.51 15.31 7.39 14.57 10.29 14.05 13.26 13.53 16.15 13.01 18.77
$9,794 1470 20.56 5.61 19.75 9.31 19.09 13.04 18.58 16.91 18.07 20.78 17.45 24.30
1750 24.95 6.71 24.17 11.16 23.52 15.74 23.02 20.53 22.52 25.12 22.01 29.43
1960 28.65 7.48 27.82 12.47 27.13 17.63 26.61 23.04 26.10 28.27 25.64 33.29
RSR2 -150LKS (150)
1180 22.27 6.07 21.14 10.06 20.11 14.16 19.39 18.41 18.67 22.59 17.96 26.72
$10,409 1470 28.39 7.67 27.27 12.67 26.36 17.84 25.65 23.32 24.94 28.60 | 24.33 34.06
1750 34.80 9.17 33.70 15.41 32.80 21.69 32.10 28.38 31.40 34.88 30.70 41.29
1960 39.95 10.22 38.80 17.23 37.84 24.30 37.10 31.85 36.40 39.25 35.76 46.70
RSR2 -200KS (200)
730 21.57 6.02 20.94 10.14 20.29 14.48 19.68 18.83 19.08 22.84 18.48 26.74
$17,291 880 26.52 7.11 25.78 12.22 25.14 17.46 24.43 22.70 23.87 27.53 23.44 32.23
1100 34.24* 8.82 33.40 15.18 32.63 21.98 31.93 28.56 31.24 34.70 30.84 40.98
1470 47.85 11.71 46.98 20.36 45.87 29.27 44.99 38.12 44.42 46.57 43.84 55.38
RSR2 -250KS (250)
800 36.82 9.75 35.86 16.43 34.81 23.47 33.95 30.51 33.09 37.01 32,23 43.33
$29,215 960 4.4.63 11.70 43.47 19.72 42.28 28.17 41.35 36.61 40.43 44.41 39.53 52.00
1150 54.58 13.84 53.29 23.70 52.06 34.23 50.95 44.34 49.54 53.61 48.60 63.01
1350 64.99 15.90 63.61 27.52 62,29 39.74 61.10 51.77 60.02 63.18 59.18 74.98
RSR2 -300KS (300)
800 74.64 20.81 71.85 30.73 69.81 44.04 67.88 57.36 66.26 70.67 64.65 84.15
$48,397 960 91.31 24.37 88.39 36.98 86.23 53.40 84.35 69.87 82.61 86.15 80.78 102.14
1150 110.48 29.20 107.47 44.52 105.15 64.48 103.07 84.53 101.13 104.43 99.5 124.5
1350 130.99 34.27 128.05 52.52 125.29 76.06 123.17 100.01 121.21 123.93 119.7 148.4
NOTE
The motor must be selected with 10 to 20% margin from the required power (La in kW).
The standard condition is defined as a temperature of 20°C, absolute pressure of 101.3kPa, and relative humidity of 70%.
For blowers with a discharge bore diameter of 80 to 250mm, the 3-lobe spur rotor can be exchanged with a helical rotor (option).
In case of operating at 0.6kg/cm2 (58.8kPa), if you need a larger model, contact Aussie Pumps
WASTEWATER TREATMENT
BLOWER AERATION SELECTION GUIDE … IT’S EASY
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 41 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Motor
Not included
Suction Silencer
3.1.4 RS Series … rotary air blower
3.1 PRE-TREATMENT EQUIPMENT (AERATION & MIXING EQUIPMENT)
Model ( in mm) Discharge Bore
Speed (rpm)
Suction air volume at standard condition (Qs in m3/min) and required power (La in kW) Cooling Water (L/min)
List price 0.4 kg/cm2 (39.2 kPa) 0.5 kg/cm2 (49.0 kPa) 0.6 kg/cm2 (58.8 kPa) 0.7 kg/cm2 (68.6 kPa) 0.8 kg/cm2 (78.5 kPa)
Qs La Qs La Qs La Qs La Qs La
RSR2-80WKS (80)
1150 2.67 3.70 2.39 4.31 2.16 4.89 1.94 5.44 1.76 6.08
6 $5,494
1300 3.35 4.33 3.06 5.13 2.82 5.85 2.62 6.66 2.44 7.50
1450 4.04 4.89 3.75 5.85 3.54 6.84 3.34 7.87 3.16 8.87
1500 4.21 5.02 3.91 6.02 3.68 7.04 3.49 8.12 3.31 9.15
1750 5.41 6.06 5.13 7.24 4.88 8.40 4.70 9.72 4.51 11.02
2040 6.63 6.85 6.29 8.19 5.99 9.55 5.74 10.89 5.54 12.49
RSR2-100WKS (100)
1150 3.94 5.14 3.67 6.22 3.43 7.29 3.22 8.38 3.03 9.60
8 $5,910
1450 5.65 6.49 5.37 7.84 5.12 9.23 4.90 10.65 4.70 12.03
1500 5.89 6.69 5.60 8.07 5.36 9.56 5.12 10.95 4.93 12.47
1750 7.33 7.76 7.00 9.40 6.72 11.05 6.44 12.73 6.17 14.39
2040 8.93 8.74 8.59 10.61 8.24 12.44 7.89 14.28 7.60 16.05
RSR2-125WKS (125)
1180 11.4 11.8 10.9 14.4 10.5 17.0 10.1 19.6 9.8 22.3
10 $10,658 1470 15.3 14.9 14.8 18.2 14.4 21.4 14.0 24.8 13.7 28.3
1750 19.1 17.5 18.6 21.4 18.2 25.2 17.8 29.1 17.5 33.1
1940 22.0 19.2 21.6 23.6 21.2 27.9 20.8 32.4 20.5 36.8
RSR2-150WKS (150)
1180 19.8 19.0 19.1 23.4 18.4 27.6 17.9 32.1 17.3 36.3
13 $12,852 1470 25.8 23.5 25.2 28.9 24.5 34.0 23.9 39.3 23.3 44.4
1750 32.0 27.5 31.3 33.9 30.8 40.2 30.2 46.3 29.6 52.3
1940 36.8 30.3 36.1 37.2 35.5 44.1 34.9 51.0 34.4 57.7
RSR2-200WKS (200)
880 37.3 34.1 36.3 41.7 35.5 49.6 34.6 57.4 33.8 65.6
16 $28,224
970 42.2 37.6 41.1 45.9 40.2 54.6 39.2 63.3 38.5 72.3
1100 49.1 42.5 48.1 52.3 47.1 62.0 46.1 71.9 45.1 81.6
1180 53.0 45.5 51.9 56.0 50.9 66.4 49.8 77.0 48.8 87.6
1470 67.2 56.5 66.0 69.9 64.8 83.1 63.7 96.3 62.6 109.5
1750 81.6 67.5 80.3 83.3 79.1 99.0 77.8 115.1 76.7 131.0
RSR2-200LWKS (200)
880 42.8 39.1 41.6 47.8 40.6 56.8 39.6 65.8 38.7 75.1
16 $29,518
970 48.3 43.0 47.1 52.6 46.1 62.6 45.0 72.5 44.1 82.8
1100 56.3 48.7 55.1 60.0 54.0 71.1 52.9 82.4 51.7 93.5
1180 60.7 52.1 59.5 64.2 58.3 76.0 57.1 88.2 55.9 100.4
1470 77.0 64.8 75.6 80.1 74.3 95.3 73.0 110.3 71.7 125.5
1750 93.5 77.4 92.0 95.5 90.7 113.4 89.2 131.9 87.9 150.1
RSR2-250WKS (250)
880 79.1 68.8 77.6 85.0 76.1 100.5 74.8 116.3 73.5 132.0
18 $53,810 980 89.9 76.7 88.3 94.7 86.8 112.0 85.4 129.5 84.1 147.0
1150 107.5 90.4 105.5 111.0 103.8 131.3 102.2 151.5 100.7 171.1
1280 122.2 100.8 120.3 123.7 118.4 146.0 116.4 167.8 114.7 189.1
RSR2-300WKS (300)
730 94.8 82.8 92.9 102.7 91.2 122.6 89.5 141.9 87.8 161.4
20 $73,268
800 105.9 90.1 103.9 111.9 101.9 133.2 100.3 154.4 98.7 175.7
880 118.4 98.1 116.1 121.9 114.1 145.0 112.5 168.8 111.1 192.2
980 134.4 108.3 132.1 134.3 130.2 160.2 128.3 186.4 126.6 213.1
1150 161.9 127.2 159.4 157.3 157.2 187.1 155.1 216.2 153.5 246.4
RSR2-350WKS (350)
580 162.6 141.0 159.3 173.4 156.0 205.9 153.2 237.1 150.5 269.2
25 $134,185
650 186.7 155.5 183.7 191.9 180.4 226.9 177.4 261.7 175.1 298.3
700 206.8 168.8 203.5 207.2 200.5 245.7 198.3 284.7 195.3 322.2
750 226.3 180.0 222.6 220.9 219.7 262.5 217.0 303.9 214.3 344.5
800 246.8 191.2 242.8 235.3 239.1 278.2 236.3 321.3 233.7 365.0
Selection Chart … RSR—WKS water cooled type
Standard Inclusions Common base Suction silencer (with air filter) Discharge silencer Belt cover Pressure gauge Safety valve V-belt Anchor bolts
Optional Accessories Gate valve Anti vib rubber Acoustic hood Indoor use drip proof motor Flexi check or expansion joint Pulley
Optional Specifications Electro less Nickel Plating All Stainless Steel Version (Blower)
WASTEWATER TREATMENT
BLOWER AERATION SELECTION GUIDE … IT’S EASY
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 42 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
The KE/KS series are front-type mechanical bar screens. The major parts are 304 stainless steel. These bar screens remove solids from wastewater prior to treatment.
Trapped solids are removed from the screens themselves by rakes moving up between the bars. The solid waste then falls into collection
bins or onto a conveyor installed behind the top of the screen.
The KS series have a roller mechanism that pulls the rake out of the screen bars at the solids releasing point and eliminates the jamming of solids.
All KE & KS screens use 0.1kW motors.
3.2.1 KE/KS Series … water treatment bar screen
Model S/code Bar spacing mm
Capacity m3/h
Height mm
Width of Water Way ( mm)
Install Angle
Weight kgs List Price
KE-200S
TUT-KE-200S-2 2.0 26
510 300 ~ 400 60 ̊ 32
$10,845
TUT-KE-200S-2.5 2.5 31 $10,845
TUT-KE-200S-5 5.0 41 $10,702
KE-200M
TUT-KE-200M-2 2.0 36
685 300 ~ 400 60 ̊ 38
$17,809
TUT-KE-200M-2.5 2.5 46 $17,809
TUT-KE-200M-5 5.0 58 $17,276
KE-200L
TUT-KE-200L-2 2.0 49
865 300 ~ 400 60 ̊
$20,876
42 TUT-KE-200L-2.5 2.5 62 $20,876
TUT-KE-200L-5 5.0 78 $19,563
Model S/code Bar spacing mm
Capacity m3/h
Height mm
Width of Water Way ( mm)
Install Angle
Weight kgs List Price
KS-200Z
TUT-KS-200Z-1 1.0 16
520 330 ~ 400 60 ̊ 33
$16,679
TUT-KS-200Z-2 2.0 26 $14,662
TUT-KS-200Z-2.5 2.5 31 $14,662
TUT-KS-200Z-5 5.0 41 $14,309
KS-200Y
TUT-KS-200Y-1 1.0 29
760 400 ~ 500 60 ̊ 49
$20,558
TUT-KS-200Y-2 2.0 47 $18,913
TUT-KS-200Y-2.5 2.5 56 $18,913
TUT-KS-200Y-5 5.0 74 $18,467
KS-300Y
TUT-KS-300Y-1 1.0 43
760 500 ~ 600 60 ̊ 54
$24,288
TUT-KS-300Y-2 2.0 70 $22,271
TUT-KS-300Y-2.5 2.5 84 $22,271
TUT-KS-300Y-5 5.0 110 $21,824
KS-200S
TUT-KS-200S-1 1.0 17
800 330 ~ 400 45 ̊ 47
$22,494
TUT-KS-200S-2 2.0 28 $21,824
TUT-KS-200S-2.5 2.5 31 $21,824
TUT-KS-200S-5 5.0 47 $21,526
KS-200M
TUT-KS-200M-1 1.0 25
920 330 ~ 400 45 ̊ 52
$26,150
TUT-KS-200M-2 2.0 41 $24,736
TUT-KS-200M-2.5 2.5 48 $24,736
TUT-KS-200M-5 5.0 70 $24,058
KS-200L
TUT-KS-200L-1 1.0 32
1050 330 ~ 400 45 ̊
$28,234
62 TUT-KS-200L-2 2.0 55 $27,423
TUT-KS-200L-2.5 2.5 63 $27,423
TUT-KS-200L-5 5.0 93 $26,225
3.2 PRE-TREATMENT EQUIPMENT
FREE Wastewater Treatment Selection Guide … call for your copy
KE series
KS series
Model S/code
Capacity m3/h Bar spacing mm 20 30 40 50
Height mm
Width of Water Way ( mm)
Install Angle
Weight kgs List Price
KS-200S TUT-KS-200S-C(bar spacing) 70 75 80 85 800 330 ~ 400 45 ̊ 47 $21,153
KS-200M TUT-KS-200M-C(bar spacing)
104 111 119 123 920 330 ~ 400 45 ̊ 52 $23,164
KS-200L TUT-KS-200L-C(bar spacing) 137 147 157 165 1050 330 ~ 400 45 ̊ 62 $25,851
Coarse screens with a bar spacing of 20mm to 50mm. These screens are efficient when used before a fine screen.
The KM/KMA series …. rear-type mechanical bar screens also available. Call for details
WASTEWATER TREATMENT
BAR SCREENS MANUAL & AUTO RAKE
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 43 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Model S/code
Bar spacing (mm)
Capacity m3/h
Height (mm) Channel width ( mm)
Install angle
Weight kgs List Price
(304 ss)
Length (mm) List Price
(316 ss) H1 H2 H3
KW-4027
TUT-KW4027_1(S) 1 17
270 660 323 544 300-400 60° 23.5 $9,395 $10,741 TUT-KW4027_2(S) 2 29
TUT-KW4027_2.5(S) 2.5 34
TUT-KW4027_5(S) 5 47
KW-5027
TUT-KW5027_1(S) 1 26
270 660 323 650 400-500 60° 27 $9,446 $12,339 TUT-KW5027_2(S) 2 45
TUT-KW5027_2.5(S) 2.5 52
TUT-KW5027_5(S) 5 73
KW-6027
TUT-KW6027_1(S) 1 36
270 660 323 774 500-600 60° 30.5 $9,632 $12,454 TUT-KW6027_2(S) 2 61
TUT-KW6027_2.5(S) 2.5 70
TUT-KW6027_5(S) 5 98
KW-4038
TUT-KW4038_1(S) 1 27
380 842 506 544 300-400 60° 27.8 $9,632 $12,454 TUT-KW4038_2(S) 2 45
TUT-KW4038_2.5(S) 2.5 52
TUT-KW4038_5(S) 5 73
KW-5038
TUT-KW5038_1(S) 1 41
380 842 506 650 400-500 60° 32.1 $9,867 $12,730 TUT-KW5038_2(S) 2 69
TUT-KW5038_2.5(S) 2.5 81
TUT-KW5038_5(S) 5 113
KW-6038
TUT-KW6038_1(S) 1 56
380 842 506 774 500-600 60° 36.5 $10,108 $12,984 TUT-KW6038_2(S) 2 95
TUT-KW6038_2.5(S) 2.5 109
TUT-KW6038_5(S) 5 153
KW-4049
TUT-KW4049_1(S) 1 39
490 1057 722 544 300-400 60° 31.8 $9,867 $12,730 TUT-KW4049_2(S) 2 66
TUT-KW4049_2.5(S) 2.5 76
TUT-KW4049_5(S) 5 105
KW-5049
TUT-KW5049_1(S) 1 60
490 1057 722 650 400-500 60° 37.1 $10,108 $12,984 TUT-KW5049_2(S) 2 101
TUT-KW5049_2.5(S) 2.5 117
TUT-KW5049_5(S) 5 164
KW-6049
TUT-KW6049_1(S) 1 81
490 1057 722 774 500-600 60° 42.3 $10,573 $13,215 TUT-KW6049_2(S) 2 138
TUT-KW6049_2.5(S) 2.5 158
TUT-KW6049_5(S) 5 223
3.2.2 NEW KW Series … automatic bar screen
3.2 PRE-TREATMENT EQUIPMENT
KW series are a durable and efficient solution for primary fine screening of wastewater.
Suit installation in channels with depths from 270mm and widths from 300mm. Bar spacing options from 1 - 5mm.
These bar screens remove solids from wastewater prior to treatment. Trapped solids are removed from the screens themselves by rakes moving up between the bars. The solid waste then falls into collection bins or onto a conveyor installed behind the top of the screen.
Low installation and operating costs, easy maintenance
Bar screen design prevents rakes jamming
Fine mechanical screening from 1mm
Three phase geared motor (0.09kW) with IP 66 rating
Safety protection for motor
304 SS or 316 SS
No submerged revolving parts
Add S after s/code for 316 ss version
WASTEWATER TREATMENT
304 & 316 STAINLESS STEEL BAR SCREENS
WA
TE
R T
RE
AT
ME
NT
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 44 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice
Global Leader
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
3.3 SKIMMER PUMP … FSP SERIES
Efficiently collect scum. The unique FSP scum skimmer removes floating oils, grease and solids. The scum is then pumped to collection tanks for processing.
Can be adjusted to any depth below the water surface.
Designed with a jet injector suction mechanism to collect scum efficiently.
The FHP series are decanting pumps with a device for monitoring the sludge surface. The pump ensures that only supernatant liquid is discharged, without any sediment.
3.4 DECANTING PUMP … FHP SERIES
Discharge Port (mm) Model S/code
Motor Output
kW Phase Starting Method Speed
Dry Weight kg FREE STANDING
Max. Solid Handling mm
Cable length m List Price
50 4-FSP TUT-4-FSP 0.4 3-phase d.o.l. 3000 36 16 6 $3,627
50 8-FSP TUT-8-FSP 0.75 3-phase d.o.l. 3000 37.5 22 6 $4,498
Discharge Port (mm) Model S/code
Motor Output kW Phase
Starting Method
Dry Weight kg FREE STANDING
Head Max. m
Capacity max. l/min
Cable length m List Price
40 FHP3-3 TUT-FHP2-3 0.25 Capacitor 29.5 8 200 6 $8,807
40 FHP3-3T TUT-FHP2-3T 0.25 Capacitor 27.5 8 200 6 $8,807
50 FHP2-4 TUT-FHP-4 0.4 single Capacitor 29 10 280 6 $8,910
50 FHP2-4T TUT-FHP-4T 0.4 3-phase d.o.l. 27 10 280 6 $8,910
50 FHP4-8T TUT-FHP3-8T 0.75 3-phase d.o.l. 27.5 13 420 6 $14,728
80 FHP2-15T TUT-FHP2-15T 1.5 3-phase d.o.l. 60 11 800 6 $22,538
For online demo search Tsurumi skimmer pump or click on above You Tube image
For online demo search Tsurumi decanting pump or click on You Tube image above
WASTEWATER TREATMENT
SCUM SKIMMERS & DECANTING PUMPS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 45
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
… for diesel fuel or industrial chemicals, check chemical compatibility chart if unsure.
HONDA PETROL DRIVE
Heavy duty cast construction
Big open impeller
Self primes from 6 metres
Replaceable suction cover
Available with either Honda petrol or, Yanmar or Kohler diesel drive units
Mech seals on bronze & stainless steel pumps… carbon/alumina faces, nitrile rubber seal & 316 stainless steel casing
Viton seals option, specify a stainless steel pump with Viton seals for corrosive applications like AdBlue® & chemical transfer (see below)
Silicon carbide/alumina mechanical seal faces with nitrile rubber seals standard on cast iron trash pumps
Battery pack option
Battery pack extra $165+gst for electric start models (QBATTERYPACK)
DIESEL DRIVE
Industrial Applications … Cast Iron
Industrial waste pump out
Livestock effluent pump out
Dust suppression
Water cart pumps
Fire fighting
Sump pumping
mineral processing
Quarry dewatering Marine Applications … Ni Al bronze
Deck wash down
Bilge pump out
Salvage pump
Marine fire fighting Industrial/Mining Applications … 316 cast stainless steel
Aggressive water
Sewage handling
Acid & solvent pumping
Ag chemical transfer
Industrial food waste
AdBlue® transfer
Inlet/Outlet Model S/code
CAT no. Engine HP RPM
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (electric start version)
Frame Dimensions (WxLxH) mm List price
Cast iron
3” x 3” B3KQ-A/ST GB3KQ-A/STL70E AA5B YANMAR e/start 7 3000 16 900 27 63 560x680x760 $6,885
4” x 4” B4KQ-A/ST GB4KQ-A/ST L100E AA3S YANMAR e/start 10 3000 21 1500 35 100 560x680x760 $8,909
3” x 3” GB3XR-A/ST/L100E AAC0 YANMAR e/start 10 3000 28 1000 20 100 560x680x760 $8,580
B3XR-A/ST GB3XR-A/ST/1B50E AA6A HATZ e/start 11 3600 40 1250 20 tba tba $7,899
NI AL bronze - Marine Grade … stainless steel plugs & fasteners
2” x 2”
G2TMK-A/B G2TMKA/B L100E AA1C YANMAR e/start 10 3000 34 400 6 82 560x680x760 $10,051
B2KQ-A/B GB2KQ-A/B L48
AA3B YANMAR recoil
4.8 3000 19 450 16 50 445x510x550 $8,012
GB2KQ-A/B L48E YANMAR e/start $9,413
3” x 3” B3KQ-A/B GB3KQ-A/B/L70
AA4B YANMAR recoil
7 3000 16 840 27 63 560x680x760 $8,444
GB3KQ-A/B/L70E YANMAR e/start $9,577
4” x 4” B4KQ-A/B GB4KQ-A/BL100E YANMAR e/start 10 3000 15 1650 35 100 560x680x760 $11,814
Stainless Steel Steel—316 Grade for corrosive & abrasive applications
2” x 2” B2KQ-A/X GB2KQ-A/X/L48
AA2B YANMAR recoil
4.8 3000 20 440 16 50 445x510x550 $9,401
GB2KQ-A/X/L48E YANMAR e/start $10,659
3” x 3” B3XR-A/X GB3XR-A/X/L100E AA2C YANMAR e/start 10 3000 24 1250 24 100 560x680x760 $17,805
4” x 4” B4XR-A/X GB4XR-A/X/KD477E KOHLER KD477 e/s 23 3000 31 2100 32 180 1200x1000x1000 $28,475
Inlet/Outlet Model S/code
CAT no. Engine HP RPM
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (kg)
Dimensions (WxLxH) mm List price
Cast iron
3” x 3”
B3XR-A/ST Water cart special (no frame)
GB3XR-A/ST390ENF AA6A HONDA petrol 13 3600 40 1250 20 95 560x680x760 $3,984
Water cart special, B3XRA GX390 , no frame, includes base plate
Rejuvenation Kits
Model CAT no. S/code
B3XR-A/ST AA6A GREJK-B3XR-STENG (R522) $284
4. AUSSIE GMP … CAST IRON, BZ & 316 CAST SS
PROCESS/INDUSTRY/ WATER CARTS
ENGINE DRIVE CAST IRON SEMI TRASH
B2KQ-A/B ST
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 46
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Performance at 2900 rpm
4. AUSSIE GMP … SEMI TRASH MOTOR PUMPS … RUBBISH GOBBLERS
PROCESS/INDUSTRY/ FOOD WASTE
SINGLE & 3 PHASE CAST IRON SEMI TRASH
Industrial Applications
Industrial waste
Livestock effluent
Sewage
Abattoir waste
Livestock waste
Wash bay water recirculation
Batch plant
mineral processing
Quarries
Food processing
Heavy duty cast construction
Open non clog style impeller for passing spherical, compressible solids in suspension
Self primes from 6 metres vertical lift
Front mounted clean out port
Close coupled to a heavy duty TEFC single or three phase electric drive motor IP rated
Cast iron foot mounting on pumps up to 2.2kW
Pumps 4kW & over mounted on steel base plate
Silicon carbide mech seal/alumina counterface with nitrile rubber seals standard, option of tungsten carbide with Viton
316 stainless steel motor shaft
No power lead or plug supplied
Note: two CAT numbers indicate product is in development transition, with the new number listed second.
B2KQ-A/ST
B4XR-A/ST
Suct/Del Model s/code CAT no. (old/current) Motor kW
IP rating
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (kg)
Box size (WxLxH) mm List price
1½ x 1½ B1½KQ-A/ST GB1.5KQ-A/ST 1P EA6E 1 , 240v
0.75 54 15 270 11 20 210x450x400 $1,238
GB1.5KQ-A/ST 3P EA6F 3 , 415v $1,238
2” x 2” B2KQ-A/ST GB2KQ-A/ST 2.21P EB93 1 , 240v
2.2 54 18 440 19 31.5 200x500x390 $1,947
GB2KQ-A/ST 2.23P EB78 3 , 415v $1,947
3” x 3”
B3KQ-A/ST GB3KQ-A/ST2.2 1P EA3M/EAR5 1 , 240v
2.2 54 16 900 27 31.5 220x500x390 $2,074
GB3KQ-A/ST2.2 3P EAR6 3 , 415v $2,074
B3XR-A/ST
GB3XR-A/ST 4KW EAS1/EAFV
3 , 415v
4
55
26 1300 19 79 410x770x645 $4,356
GB3XR-A/ST 5.5KW EAS3/EANH 5.5 26 1400 24 96 415x855x665 $5,181
GB3XR-A/ST 7.5KW EAS5/EANL 7.5 31 1500 24 98.5 415x855x665 $5,479
4” x 4”
B4KQ-A/ST GB4KQ-A/ST 4KW EAR8/EAGF 3 , 415v 4 55 14 1600 37 83.5 410x770x645 $4,150
B4XR-A/ST GB4XR-A/ST 11KW EADL
3 , 415v 11
55 30 2200 35 217 515x1060x725 $6,958
GB4XR-A/ST 15KW EAS7/EANM 15 29 2300 39 228 515x1060x725 $7,259
Rejuvenation Kits
Viton parts for electric drive pumps
Model Mech Seal Counterface Check Valve
S/code List price
S/code List price
S/code List price
B2KQA/ST G7710 $77 G7709 $125 GH006 $62
B3KQA/ST G7710 $77 G7709 $125 G7585 $81
B4KQA G5217 $177 G6588 $136 G8435 $123
B3XRA, B4XRA
G5217 $177 G6588 $136 G6103 TBA
$123 $135
Model CAT no. kW S/code
List price
B2KQ-A/ST EB93
2.2 GREJK-B2KQ-ST2KW (R516) $233
EB78
B3KQ-A/ST EAR5
2.2 GREJK-B3KQ-ST2KW (R517) $233
EAR6
B3XR-A/ST EAFV 4 GREJK-B3XR-ST3P (R518) $284
B4KQ-A/ST EAGF 4 GREJK-B4KQ-ST3P (R519) $310
B4XR-A/ST EADL 11 GREJK-B4XR-ST3P $342
Kits include mech seal, counterface, complete check valve, filling cap & trash port gaskets
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 47
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
4. AUSSIE GMP … HIGH PRESSURE MOTOR PUMPS
IRRIGATION/WASH DOWN/DUST SUPRESSION
SINGLE & 3 PHASE CAST IRON HIGH HEAD
Industrial Applications … Cast Iron High pressure water
transfer Machinery wash down Spray irrigation Industrial processing
Close grained cast construction
Open style impeller (except B_ZPMA series)
Self primes from depths of 6 metres
Replaceable suction port
Close coupled to a heavy duty TEFC single or three phase 2 pole electric drive motor
Simple pump design
Steel base plate standard from 4kW up
Carbon mech seal/alumina counterface with nitrile rubber seals standard, option of silicon carbide or tungsten carbide with Viton
316 stainless steel motor shaft
No power lead or plug supplied
Performance figures to be taken as a guide only, for detailed
performance curves contact an Aussie Gold Dealer.
Note: two CAT numbers indicate product is in development transition, with the new number listed second.
Performance at 2900 rpm
◼
◼
Inlet/Outlet Model S/code CAT no. Motor kW
IP rating
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (kg)
Box size (WxLxH) mm List price
2” x 2” G2TMK-A
G2TMK-A 2.2KW 1P EA3S/EAEL 1ɸ, 240v 2.2
54 33.5 375 5
37 260x470x380
$1,842
G2TMK-A 2.2KW 3P EAT6/EADT 3ɸ, 415v $1,842
G2TMK-A 3KW 415V EAT8 3ɸ, 415v 3 34 400 8 260x470x380 $2,577
2” x 1½” B1½ZPM-A GB1.5ZPM-A 7.5 EAL5/EANN 3ɸ, 415v 7.5 55 58.5 600 6 111 415x855x665 $5,510
2” x 2” B2ZPM-A GB2ZPM-A15KW EANP 3ɸ, 415v 15 55 70 800 6 220 515x1060x725 $8,649
3” x 3” B3ZPM-A GB3ZPM-A 18.5KW EAH0 3ɸ, 415v 18.5 55 71 1250 14 247 515x1060x725 $8,940
NEW 3” Semi trash high pressure pumps … Silicon carbide mech seal
3” x 3”
G3TMK-A/ST
G3TMK-A/ST 4KW EANC
3ɸ, 415v
4
55
35 800 8 82.5 410x770x645 $4,061
G3TMK-A/ST 5.5KW EAND 5.5 40 910 10 99 415x855x665 $4,949
G3TMK-A/ST 7.5KW EANE 7.5 47 850 13 105 415x855x665 $5,663
G3TMK-A/ST 11KW EANG 11 54.4 1100 16 202 515x1060x725 $6,739
B3ZPM-A/ST GB3ZPM-A/ST18.8KW EA9A
3ɸ, 415v 18.5 70 1250 14 247 515x1060x725 $8,757
GB3ZPM-A22KW EA9B 22 78 1250 19 275 515x1060x725 $9,246
G3TMK-A
G3TMK-A/ST
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 48
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
MARINE/MINE/FOOD & CHEMICAL PROCESSING
4. AUSSIE GMP … BRONZE & SS MOTOR PUMPS … CORROSION RESISTANT
SINGLE & 3 PHASE NIAL BRONZE & CAST 316 SS
Heavy duty cast construction
Big open impeller
Self primes from 6 metre
Replaceable suction cover
NI AL (nickel aluminium) bronze, Mil-Spec equiv
Cast 316 stainless steel option for corrosive applications
Close coupled to a heavy duty TEFC single or three phase electric motor IP rated
Cast iron foot mounting on
pumps to 2.2kW
Steel base plate standard from 4kW
Mech seals on bronze & stainless steel pumps… carbon mech seal/alumina counterface, nitrile rubber seal & 316 stainless steel casing
Viton seals option, specify for corrosive applications like AdBlue® and chemical transfer (see page 29)
No power lead or plug supplied
Applications: Marine Applications …. NI AL bronze
Deck wash down
Bilge pump out
Salvage pump
Marine air conditioning
Industrial/Mining Applications … Stainless steel
Aggressive water
Sewage handling
Acid & solvent pumping
Industrial food waste
Ag chemical transfer
AdBlue® transfer
B2KQA/B
G3TMK-A/X
Stainless Steel—316 Grade for corrosive applications
2” x 2” B2KQ-A/X
GB2KQ-A/X 1.5 1P EA7T/EA7G 1 , 240v 1.5
54 20 440 16 23.5 210X450X400
$5,084
GB2KQ-A/X 1.5 3P EA7E 3 , 415v 1.5 $5,084
GB2KQ-A/X 2.2 1P EB92 1 , 240v 2.2 $6,094
GB2KQ-A/X 2.2 EASM 3 , 415v 2.2 $6,094
3” x 3” B3XR-A/X GB3XR-A/X 4KW EAD2/EALP
3 , 415v 4
55 28 1300 19 78.2 410x770x645 $9,339
GB3XR-A/X 5.5KW EAC6/EALR 5.5 1400 24 96 415x855x665 $10,046
4” x 4” B4XR-A/X GB4XR-A/X 15KW EAAC 3 , 415v 15 55 31 2100 32 225 515x1060x725 $19,693
High head options … for transfer long distances or up a steep gradient
3” x 3” G3TMK-A/X
G3TMK-A/X 5.5KW EACB/EALV 3 , 415v 5.5 55 40 910 10 102 415x855x665 $11,076
G3TMK-A/X 7.5 3P EABE/EALZ 3 , 415v 7.5 55 44 850 13 106 415x855x665 $11,267
G3TMK-A/X 11KW EACD 3 , 415v 11 55 55 1100 16 204 515x1060x725 $13,307
Inlet/Outlet Model CAT no. Motor kW
IP rating
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (kg)
Box size (WxLxH) mm List price
NIAL bronze - Marine Grade … stainless steel plugs & fasteners
1”x 1” B1KQ-A/B GB1KQ-A/B 0.371P EA9M 1 , 240v
0.37 54 12 130 6 19 210x450x400 $3,006
GB1KQ-A/B 0.5 3P EA9N 3 , 415v $3,006
2” x 2” B2KQ-A/B GB2KQ-A/B 2.2 1P EB88 1 , 240v 2.2
54 19 450 16 27.5 200x430x360 $3,621
GB2KQ-A/B 2.2 3P EA7V 3 , 415v 2.2 $3,621
3” x 3”
B3KQ-A/B
GB3KQ-A/B2.2 1P EABS/EAT1 1 , 240v
2.2 54 16 840 27 33 220x500x390
$3,725
GB3KQ-A/B2.2KW3P (rejuv kit GREJK-B3KQ-A/B) EAT2 3 , 415v $3,725
($233)
B3XR-A/B
GB3XR-A/B 4KW EAB5/EALB 3ɸ, 415v 4
55
28 1300 19 82.5 410x770x645 $7,270
GB3XR-A/B 5.5KW EALC 3ɸ, 415v 5.5 28 1400 24 105 415x855x665 $8,289
GB3XR-A/B 7.5KW EAB6/EALD 3ɸ, 415v 7.5 30 1500 24 107.5 415x885x665 $8,830
B4KQ-A/B GB4KQ-A/B 4KW EAB4/EALE 3 , 415v 4 55 15 1650 35 88 410x770x645 $9,497 4” x 4”
B4XR-A/B GB4XR-A/B 15KW3P EAB7/EAFG 3 , 415v 15 55 31 2250 39 234 515x1060x725 $12,860
High head options … to transfer long distances or up a steep gradient
2” x 2” G2TMK-A/B G2TMK-A/B2.2KW1P EA9H 1 , 240v 2.2
54 34 400 8 37 260x470x380 $4,039
G2TMK-A/B 2.2KW EA4R 3 , 415v 2.2 $4,039
3” x 3”
G3TMK-A/B
G3TMK-A/B 4KW EAHS 3 , 415v 4
55
35 850 8 90 410x770x645 $10,398
G3TMK-A/B7.5KW EAHV 3 , 415v 7.5 44 900 13 112 415x855x665 $11,584
G3TMK-A/B 11KW EAFR 3 , 415v 11 52 1030 16 208 515x1060x725 $14,280
B3ZPM-A/B
GB3ZPM-A/B 15KW EAFD
3ɸ, 415v
15 65 1200 13 225 515x1060x725 $13,541
GB3ZPM-A/B18KW EADV 18.5 70 1200 14 245 515x1060x725 $14,589
GB3ZPM-A/B 22KW EARV 22 76 1200 19 280 515x1060x725 $16,555
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 49
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
These pumps are fitted with ATEX certified flameproof motors and are designed for transferring diesel fuel oil in hazardous environments.
Refuelling Applications
Machinery
Marine diesel
Earth movers
Mining plant
Generator/pump
Other Applications
Waste oil collection
Heating oil transfer
Heavy duty cast construction
Big open impeller
Self primes from 6 metres
Replaceable suction cover
ATEX certified flameproof heavy duty motor with IP 55 protection
Cast iron foot mounting, all units 4kW and over are mounted on a
steel plate
Viton/Carbon/Alumina seals standard
Performance figures based on fresh water viscosity liquids
Manufactured in accordance with standards ATEX 94/9/CE ( II 2G Ex d IIC T4)
Aussie Dispenser …. complete fuel station
Just add diesel fuel and the dispenser does the rest. Kit includes Domus pump, set up on
wall mounted steel plate, with flow metre, maximum flow to 35 litres per minute, hose and aluminium nozzle gun.
Auto stop nozzle gun (CAT# 6793) option available for no spill fuel transfer.
Inlet/Outlet Model S/code CAT # Motor kW Max Capacity (l/m)
Max Head (m) Weight (kg)
1” x 1” Dispenser GDISPENSER 240V EAE3 240 volt 0.4 35 20 18.5 $1,292
Dispenser GDISPENSER 415V 9043 415 volt 0.4 35 20 18.5 $1,292
Inlet/Outlet Model S/code CAT no. Motor kW
Max Capacity (l/m)
Max Head (m)
Weight (kg)
Box size (WxLxH) mm
1” x 1” B1KQ-A
GB1KQ-A 12V EA2P/EAPR 12 volt
0.55
120 14 18 190x430x285 $1,404
GB1KQ/A .75HP EA4M/EA2L 1ɸ, 240V 130 14 20 210x450x400
$864
GB1KQ-A.5KW 3P EA2M 3ɸ, 415V $864
1” BKQ-A Motor Pumps for Oil/Diesel Fuel Transfer (Not ATEX certified)
Designed for systems requiring high flow i.e. dump truck or crawler tractor fast refuelling in the field. Viton seals fitted.
Inlet/Outlet Model S/code
CAT no. Motor kW
IP rating
Total Head (m)
Max Capacity (l/m)
Solid size (mm)
Weight (kg)
Box size (WxLxH) mm List price
1½”x 1½” B1½KQ-A ATEX
GB1.5KQ-A/ATEX1P EAZ3 1ɸ, 240V 0.75 55 16 290 8.5 26.5 260x545x345
$2,882
GB1.5KQ-A/ATEX3P 2140 3ɸ, 415V $1,890
2”x 2” B2KQ-A ATEX GB2KQ-A ATEX240 EA9D 1ɸ, 240V
1.5 55 19 440 16 32.5 260x545x345 $3,651
GB2KQ-A ATEX3P 2141 3ɸ, 415V $2,287
3”x 3”
B3KQ-A ATEX GB3KQ-A ATEX240 EA9E 1ɸ, 240V
2.2 55 16 750 27 37.2 400x600x345 $4,081
GB3KQ-A ATEX 2.2 2138 3ɸ, 415V $2,569
B3XR-A ATEX
GB3XR-A ATEX 4KW 2139
3ɸ, 415V
4
55
26 1300 19 84 410x770x645 $4,774
GB3XR-A ATEX 5.5 EAV4 5.5 26 1430 24 112 415x855x665 $5,806
GB3XR-AATEX7.5KW 2133 7.5 31 1500 24 118 415x855x665 $6,261
4”x 4” B4XR-A ATEX GB4XR-A ATEX15 EAV5 3ɸ, 415V 15 55 31 2300 39 202 515x1060x725 $10,497
High head options … for transfer of fuel oils long distances or up a steep gradient
3” x 3” G3TMK-A ATEX
G3TMK-A ATEX4 EABL 3ɸ, 415V 4 55 35 800 8 90 410x770x645 $5,376
G3TMK-A ATEX5.5 EABM 3ɸ, 415V 5.5 55 40 910 10 106 415x855x665 $5,989
G3TMK-A-ATEX7.5K EABN 3ɸ, 415V 7.5 55 44 850 13 112 415x855x665 $6,444
G3TMK-A ATEX11 EABP 3ɸ, 415V 11 55 55 1100 16 211 515x1060x725 $8,299
Inlet/Outlet Model S/code CAT # Motor kW
Max Capacity (l/m)
Max Head (m) Weight (kg)
1” x 1” Domus M GDOMUS 240V 1373 240 volt 0.37 35 20 12 $691
Domus T GDOMUS 415V 1374 415 volt 0.37 35 18 12 $691
Aussie Domus kit
The Aussie Domus is a big cast iron self priming fuel transfer pump purpose built for long trouble free life and super reliability.
The choice of professionals who transfer fuel daily, the Aussie Domus comes with 240 volt or 415 volt AC motor drive.
FUEL TRANSFER/ EARTHMOVING/MINING/
AG/MARINE
4. AUSSIE GMP … ATEX MOTOR PUMPS … DIESEL FUEL TRANSFER SPECIALISTS
SINGLE & 3 PHASE ATEX CERTIFIED
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 50
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Performance at 2900 rpm
TANKERS/PROCESSING/DRILLING/PUMP-OUT
4.5.1 AUSSIE GMP … BARE SHAFT SEMI TRASH …. RUBBISH GOBBLERS
BARE SHAFT SEMI TRASH PUMPS
Inlet/Outlet Model S/code
CAT No.
Required KW RPM
Suct/Del PSI
Total Head (m)
Capacity (l/m)
Solid size (mm)
Weight (kg)
Dimensions (WxLxH) mm List price
2” x 2” B2KQ-A/ST GB2KQ-A/ST/W AS79 1.5 2900 2” x 2” 25 18 440 19 15 182x266x305 $1,201
3” x 3”
B3KQ-A/ST GB3KQ-A/ST/W AS67 2.2 2900 3” x 3” 22 16 900 27 17 183x300x294 $1,427
B3XR-A/ST GB3XR-A/ST/W AS91 7.5 2900 3” x 3” 43 31 1500 24 46.5 290x453x400 $2,910
G3TMK-A/ST G3TMK-A/ST/W ASA8 11 2900 3” x 3” 75 54 1100 16 51.5 280x480x410 $3,006
4” x 4” B4KQ-A/ST GB4KQ-A/ST/W AS71 4 2900 4” x 4” 20 14 1600 37 54.5 315x490x405 $2,970
B4XR-A/ST GB4XR-A/ST/W ASB8 15 2900 4” x 4” 42 30 2200 39 64.5 365x505x450 $4,129
6” x 6” B6XRA-A* GB6XR-A/A ASBR 22 2000 6” x 6” 34 24 4500 55 160 500x600x600 $8,144
8” x 8” B8XR-A* GB8XR-A/A ASDV 65 1800 8” x 8” 42 30 9200 70 265 580x790x830 $14,752
Aussie GMP bare shaft cast iron self priming centrifugal semi trash pumps designed for long coupling to electric motors, petrol or diesel engines, hydraulic or PTO drives.
Industrial Applications … Cast Iron
Industrial waste pump out
Livestock effluent pump out
Public sewage works
Abattoir waste pump out
Piggeries, chicken processing, feed lots
Wash bay water recirculation
Batch plant recirculation
Mineral processing
Quarry dewatering
Heavy duty cast construction
Open non clog style impeller
Self primes from 6 metres
Front mounted clean out port
Cast iron foot mounting
Silicon carbide/alumina mechanical seal faces with nitrile rubber seal standard, option of tungsten carbide with Viton
All pumps pedestal mounted
High pressure options also available
B3XR-A/ST bare shaft
* Cast 316 stainless steel impeller options available Performance figures to be taken as a guide only, for detailed performance curves contact an Aussie Gold Dealer.
Rejuvenation Kits
Model CAT no. S/code
List price
B3XR-A/ST AS91 GREJK-B3XR-STW $310
B4KQ-A/ST AS71 GREJK-B4KQ-TW $310
B4XR-A/ST ASB8 GREJK-B4XR-STW (R520) $310
Kit includes mech seal, counterface, complete check valve, filling cap & trash port gaskets
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 51
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
FUEL TRANSFER/ EARTHMOVING/MINING/
AG/MARINE
4.5.2 AUSSIE GMP … BARE SHAFT BRONZE & SS … CORROSION RESISTANT
BARE SHAFT NIAL BRONZE & STAINLESS STEEL
Marine Applications …. NIAL bronze
Deck wash down
Marine air conditioning
Bilge pump out
Fire fighting
Salvage Industrial/Mining ... Stainless steel
Tailing dam pump out
Sewage handling
Aggressive water pumping
Acid & solvent pumping
Industrial food waste
Agricultural chemical transfer
AdBlue® transfer
Inlet/Outlet Model S/code CAT No.
Req’d
kW RPM PSI
Total Head
(m)
Capacity
(l/m) Weight (kg)
Dimensions (WxLxH) mm List price
NIAL bronze - Marine Grade … stainless steel plugs & fasteners
2” x 2” B2KQ-A/B W GB2KQ-A/B/W/BZ AS68 1.5 2900 25 18 400 15 182x266x305 $2,481
3” x 3” B3KQ-A/B W GB3KQ-A/B/W AS69 2.2 2900 20 14.5 850 17 183x300x294 $2,938
4” x 4” B4KQ-A/B W GB4KQ-A/B/W ASC6 4 2900 20 14.5 1650 54.5 315x490x405 $7,168
2” x 2” G2TMK-A/B W G2TMK-A/B/W ASB9 3 2900 43 31 400 22 242x370x355 $4,040
3” x 3” B3XR-A/B W GB3XR-A/B/W ASC3 7.5 2900 43 31 1500 46.5 290x453x400 $6,160
4” x 4” B4XR-A/B W GB4XR-A/B/W ASC5/ASDN 15 2900 43 31 2100 64.5 365x505x450 $9,352
Stainless Steel—316 Grade for corrosive applications
2” x 2” B2KQ-A/X W GB2KQ-A/X/W ASL1 1.5 2900 28 20 440 15 182x266x305 $4,561
3” x 3” B3XR-A/X W GB3XR-A/X W/O ASD1 7.5 2900 43 31 1500 46.5 290x453x400 $7,220
4” x 4” B4XR-A/X W GB4XR-A/X/W ASDR 15 2900 43 31 2100 64.5 365x505x450 $11,332
Self priming vertical lift of 6 metres
Heavy duty cast construction
NIAL bronze or 316 grade stainless steel options
Replaceable suction port
Carbon/alumina mechanical seal faces, nitrile rubber seal & stainless steel casing
Viton seals option, specify a stainless steel pump with Viton seals for corrosive applications like AdBlue® and chemical transfer
All pumps pedestal mounted
B3XR-A/SS bare shaft
Performance figures to be taken as a guide only, for detailed performance curves contact an Aussie Gold Dealer.
Rejuvenation Kits
Model CAT no. S/code
List price
B3XR-A/X ASD1 GREJK-B3XR-XW poa
Kit includes mech seal, counterface, complete check valve, filling cap gasket
Performance at 2900 rpm
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 52
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
Performance at 2900 rpm
MARINE/MINE/FOOD & CHEMICAL PROCESSING
4.6.1 AUSSIE GMP … HYDRAULIC SEMI TRASH … FLEXIBLE INSTALLATIONS
HYDRAULIC DRIVE CAST IRON SEMI TRASH
Inlet/Outlet Model S/code
CAT No. PSI
Total Head (m)
Capacity (l/m)
Solid size (mm)
Hydraulic requirements at 3,000 rpm
Weight (kg)
Unit Dims (WxLxH) mm
List price
2” x 2” B2KQ-A/ST GB2KQ-A/ST HYD AA9A/AA6U 25 18 440 19 8.5cm3/rev, 100 bar (3kW) 18.5 180x400x300 $2,255
3” x 3”
B3KQ-A/ST GB3KQ-A/ST HYD AA5B/AA7U 22 16 900 27 8.5cm3/rev, 100 bar (3kW) 20.2 185x450x300 $2,910
B3XR-A/ST GB3XR-A/ST HYD22 ASM8 43 31 1500 35 22cm3/rev, 150 bar (12.5kW) 56 280x650x400 $4,670
G3TMK-A/ST G3TMK-A/ST HYD22 ASM9 77 55 1100 16 22cm3/rev, 150 bar (12.5kW) 61 280x675x410 $5,154
4” x 4” B4KQ-A/ST
GB4KQ-A/ST HYD22 ASM7 1.4 14 1600 37 22cm3/rev, 150 bar (12.5kW) 64 315x680x405 $5,402
GB4KQ-A/ST HYD ASD8 1.4 14 1600 37 35cm3/rev, 100 bar (12.5kW) 64 315x680x405 $5,402
B4XR-A/ST GB4XR-A/ST HYD22 ASHQ 42 30 2200 39 22cm3/rev, 150 bar (12.5kW) 65 365x695x450 $6,949
Applications:
Drilling rigs
Mine and dust suppression
Water cart
Water truck tanker
Fire fighting tanker refill
Underground mine dewatering
Heavy duty cast construction
Open non clog style impeller
Self primes from 6 metres
Front mounted clean out port
Cast iron foot mounting
Silicon carbide/alumina mechanical seal faces with nitrile rubber seal standard, option of tungsten carbide with Viton
Elimination of dependant engine in mobile applications
Compact design
Power supplied by hydraulic lines
Italian hydraulic motors
Dust free closed circuit
High pressure options also available
Performance figures to be taken as a guide only, for detailed performance curves contact an Aussie Gold Dealer.
B4KQ-A/ST hydraulic drive
Rejuvenation kits
Model CAT no. S/code
List price
GB2KQ-A/ST AA6U GREJK-B2KQ-STHYD $233
GB3KQ-A/ST AA7U GREJK-B3KQ-STHYD $233
B3XR-A/ST ASD9 GREJK-B3XR-STHYD (R521) $342
Kit includes mech seal, counterface, complete check valve, filling cap & trash port gaskets
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice Page 53
Full data sheets with performance curves & dimensions available for application selection
2020 | Issue 1 (effective 1/11/19)
FUEL TRANSFER/ EARTHMOVING/MINING/
AG/MARINE
4.6.2 AUSSIE GMP … HYDRAULIC BRONZE & SS … CORROSION RESISTANT
HYDRAULIC DRIVE NIAL BRONZE & STAINLESS STEEL
Applications:
Mine & dust suppression
Water cart
Fire fighting tanker refill
Underground mine dewatering
Bilge pump out
Deck wash down
Tank aeration
Fire fighting
AdBlue® transfer
Inlet/Outlet Model S/code
CAT No. PSI
Total Head (m)
Capacity (l/m)
Hydraulic requirements at 3,000 rpm
Weight (kg)
Unit Dims (WxLxH) mm List price
NIAL bronze - Marine Grade … stainless steel plugs & fasteners
2” x 2” B2KQ-A/B GB2KQ-A/B HYD AAT3/AA9U 25 18 440 8.5cm3/rev, 100 bar (3kW) 18.5 180x400x300 $3,675
3” x 3” B3KQ-A/B GB3KQ-A/B HYD AA3G/AA1Q 22 16 900 8.5cm3/rev, 100 bar (3kW) 20.2 185x450x300 $4,023
4” x 4” B4KQ-A/B GB4KQ-A/B HYD 21 15 1520 35cm3/rev, 100 bar (12.5kW) 64 315x680x405 $9,246
3” x 3” B3XR-A/B GB3XR-A/B HYD 43 31 1500 35cm3/rev, 100 bar (12.5kW) 56 280x650x400 $8,616
4” x 4” B4XR-A/B GB4XR-A/B HYD 42 30 2200 35cm3/rev, 100 bar (12.5kW) 65 365x695x450 $12,126
Stainless Steel—316 Grade for corrosive applications
3” x 3” B3XR-A/X GB3XR-A/X HYD 43 31 1500 35cm3/rev, 100 bar (12.5kW) 56 280x650x400 $9,632
4” x 4” B4XR-A/X GB4XR-A/X/HYD ASFN 42 30 2200 35cm3/rev, 100 bar (12.5kW) 65 365x695x450 $13,242
Elimination of independent engine in mobile applications
Compact design
Power supplied by hydraulic lines
Self priming vertical lift of 6 metres
Range of materials for construction
Replaceable suction port
Mech seals on bronze & stainless steel pumps… carbon/alumina faces, nitrile rubber seal & 316 stainless steel casing
Viton seals option, specify a stainless steel pump with Viton seals for corrosive applications like AdBlue® and chemical transfer
All pumps pedestal mounted
Performance figures to be taken as a guide only, for detailed performance curves contact an Aussie Gold Dealer.
B2KQ-A/B hydraulic drive
General Data on Hydraulic Motors
Model Displacement Max continuous pressure bar (psi)
Max intermittent pressure bar (psi)
Max peak pressure bar (psi)
Max speed Min-1
Min speed Min-1 Inlet Port Outlet Port
PLM 20.8 8.26 cm3/rev 250 (3626) 280 (4061) 300 (4351) 3500 600 ½” ½”
PLM 30.22 22 cm3/rev 240 (3480) 260 (3770) 270 (3915) 3000 350 1” 1”
PLM 30.34 34.55 cm3/rev 240 (3480) 260 (3770) 270 (3915) 3000 350 1” 1”
NB: A drain line to tank must be run for reversible motors For input flow allow volumetric efficiency of 90%. Output KW figures allow for overall efficiency of 82% Output torque figures allow for mechanical efficiency of 85%. Check hydraulic pump specifications to ensure correct match. If in doubt consult a hydraulic installation engineer.
INSTALLATION GUIDELINES
PUMP
The direction of rotation of single-rotation pumps must be the same as that of the drive shaft. Check that the coupling flange correctly aligns the transmission shaft and the pump shaft. Flexible couplings should be used (never rigid fittings) which will not generate an axial or radial load on the pump shaft.
TANK
Tank capacity must be sufficient for the system’s operating conditions ( ~ 3 times the amount of oil in circulation) to avoid overheating of the fluid. A heat exchanger should be installed if necessary. The intake and return lines in the tank must be spaced apart (by inserting a vertical divider) to prevent the return-line oil from being
taken up again immediately.
LINES
The lines must have a major diameter which is at least as large as the diameter of pump or motor ports, and must be perfectly sealed. To reduce loss of power, the lines should be as short as possible, reducing the sources of hydraulic resistance (elbow, throttling, gate valves, etc.) to a minimum. A length of flexible tubing is recommended to reduce the transmission of vibrations. All return lines must end below the minimum oil level, to prevent foaming. Before connecting the lines, remove any plugs and make sure that the lines are perfectly clean.
FILTERS
We recommend filtering the entire system flow. Filters on
suction and return line must be fitted in according to the contamination class as indicated in the first pages of the catalogue.
HYDRAULIC FLUID
Use hydraulic fluid conforming to ISO/DIN standards, having viscosity as specified in the first pages of the catalogue. Avoid using mixtures of different oils which could result in decomposition and reduction of the oil’s lubricating power.
For more information refer to the hydraulic motor manual … call Aussie for a copy.
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 54
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
2020 | Issue 1 (effective 1/11/19)
THE 3 BASIC RULES OF SELF PRIMING
PUMPS
Don’t run dry
Don’t pump rocks
(ensure strainer is always fitted)
Don’t run with delivery line
closed
(pump dead-headed)
BASIC GUIDE TO FRICTION LOSS
The total head required of the pump is
calculated by adding together the
following
A - suction lift
B - static lift
C* - friction loss in delivery pipe
Add friction loss in suction pipe
if long length used.
Friction loss in fittings …
allow about 5m head for an
average number of fittings
*Use required flow rate at E in figure 1,
pipe diameter and type to determine
head loss per 100 metres of pipe in the
friction loss tables. Multiply head loss
by pipe length then divide by 100 to
get C, friction loss in delivery pipe.
Repeat for suction hose if long hose
length used.
Use Aussie pump performance curves
to determine required pump model.
For comprehensive friction loss tables
contact the pipe & fittings
manufacturers. For installation with
spray lines and irrigation systems
contact an irrigation specialist.
SELF PRIMING PUMPS: Aussie Quik-
Prime pumps are of a self priming
centrifugal design. They have excellent
priming characteristics and don't need
foot valves in order to prime. Almost
all pumps in the range prime to in
excess of 7 metres.
Self priming means that the operator
does not have to fill the entire suction
line before start up. Simply fill the
pump casing with water and start the
pump. The ejection of the water from
the pump body creates a vacuum
which, working in conjunction with
atmospheric pressure, causes water to
be drawn up the suction line.
SUCTION LINE:
• The entire suction line must be air
tight.
• Avoid sharp bends
• Ensure that no part of the suction
line is above pump level to prevent
air locks.
• Always keep suction lift to the
minimum.
• Suction lines must be large enough
to minimise friction loss.
• Ensure strainer is submerged at least
1m
ENGINE RPM
Engines on the Aussie QP range are
rated to 3600 rpm. For continuous
service slow engine revs to 3000 rpm
for better engine/pump life, pump
performance will drop accordingly.
GOLDEN RULE
Operate pump at the best efficiency
point …. 85% of total pump head.
HYDRAULIC SHOCK
Suddenly starting or stopping the water
flow by operating a shut off valve can
cause severe water hammer or
hydraulic shock . This can result in
burst pump casings and pipes and
these are not covered by warranty.
A pressure relief valve is recommended
to assist with pump protection against
pressure spikes, however it is good
practice to close valves slowly to
reduce the risk of hydraulic shock.
Need help with pump selection?
Call Aussie pumps or your local Aussie
Gold Dealer, check the web,
aussiepumps.com.au, it’s easy.
Figure 1.
PUMP SELECTION GUIDE
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 55
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
2020 | Issue 1 (effective 1/11/19)
Friction loss table … Refer to pipe manufacturer for other options including Green Line (Rural B).
Select pipe with an ID at least one size larger than the pump inlet & outlet
Polyethylene Pipe (Metric Blue Line)
PN10 (PE80), PN12.5 (PE100) BASED ON as 4130
PVC pipe PN12 Based on AS/NZS 1447-1996
Rqd flow rate l/m
Head loss m/100m Rqd flow rate l/m
Head loss m/100m OD …
ID ...
40mm
33.8mm
50mm
42.3mm
63mm
53.3mm
75mm
63.6mm
110mm
93.3mm
Nom bore
ID ...
25
29.6mm
32
37.3mm
50
53.5mm
80
78.8mm
100
101.5mm
6 0.26 6 0.15 12 0.52 0.09 12 0.49 0.16 18 0.86 0.18 0.06 18 0.98 0.33 0.06 24 1.28 0.30 0.10 24 1.62 0.54 0.10 30 1.76 0.44 0.15 30 2.40 0.80 0.14 36 2.31 0.60 0.20 36 3.31 1.10 0.20 42 2.92 0.79 0.26 0.11 42 4.34 1.44 0.26 48 3.59 1.00 0.33 0.14 48 5.50 1.82 0.33 54 4.33 1.23 0.41 0.18 54 6.77 2.24 0.40 0.06
60 5.98 1.48 0.49 0.21 60 8.16 2.70 0.48 0.08
72 7.87 2.05 0.68 0.29 72 11.29 3.74 0.67 0.11
84 9.98 2.69 0.89 0.38 0.06 84 14.86 4.91 0.88 0.14
96 12.32 3.41 1.13 0.49 0.08 96 18.87 6.23 1.11 0.18 0.05
108 14.88 4.21 1.39 0.60 0.10 108 23.29 7.68 1.37 0.22 0.06
120 22.20 5.08 1.68 0.72 0.12 120 9.27 1.65 0.26 0.08
150 30.81 7.56 2.50 1.07 0.17 150 13.83 2.45 0.39 0.12
180 40.69 10.48 3.46 1.48 0.24 180 19.18 3.40 0.53 0.16
210 51.80 13.82 4.55 1.95 0.31 210 4.47 0.70 0.21
240 64.11 17.58 5.78 2.48 0.40 240 5.68 0.89 0.26
270 77.62 21.73 7.14 3.06 0.49 270 7.02 1.10 0.33
300 26.29 8.63 3.70 0.59 300 8.49 1.32 0.39
330 31.23 10.25 4.39 0.70 330 10.07 1.57 0.47
360 36.56 11.99 5.13 0.82 360 11.78 1.83 0.55
390 42.27 13.85 5.92 0.94 390 13.62 2.12 0.63
420 48.35 15.84 6.77 1.07 420 15.57 2.42 0.72
450 54.81 17.94 7.67 1.22 450 17.63 2.74 0.81
480 61.64 20.17 8.61 1.36 480 19.82 3.07 0.91
510 22.51 9.61 1.52 510 22.12 3.43 1.02
540 24.97 10.66 1.69 540 24.54 3.80 1.13
570 27.54 11.75 1.86 570 27.06 4.19 1.24
600 30.23 12.89 2.04 600 29.71 4.59 1.36
660 35.95 15.32 2.42 660 5.46 1.62
720 42.12 17.95 2.83 720 6.39 1.89
780 48.74 20.75 3.27 780 7.38 2.18
840 55.79 23.75 3.74 840 8.44 2.49
900 26.92 4.23 900 9.56 2.82
960 30.28 4.76 960 10.75 3.17
1080 37.54 5.89 1080 13.32 3.93
1200 45.50 7.13 1200 16.13 4.75
1320 8.48 1320 5.65
1440 9.93 1440 6.62
1560 11.49 1560 7.65
1680 13.15 1680 8.76
1800 14.91 1800 9.93
2100 19.75 2100 13.15
2400 25.23
NOTE: For good practice, to minimise water hammer, it’s recommended that water velocity is kept below 1.5m/s. Pink areas in tables show where this velocity has been exceeded
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 56
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
2020 | Issue 1 (effective 1/11/19)
NEW POCKET ROCKET Aussie Super Scud AB30 3,000 psi Honda blaster
Model Scud AB30
S/code ABSS30/GX200
Pump pressure psi 3,000 (200 bar)
EWP with turbo psi 4,785
Flow lpm 10
Engine (petrol) Honda GX200
Horsepower 6.5HP
Pump speed rpm 3200
Pump type Bertolini triplex
Pump Model WBXG3025
Nozzle size 035
Accessories - Hose 8m R2 wire braid
Gun AL13
Lance Vario
Nozzle type -
Weight with skid kg 45
Boxed size with skid LxWxH (mm) 620 x 540 x 580
$1,980 AB30 with 15m hose reel kit & FREE foamer
$2,450 S/code ABSS30/GX200HR
Genuine Honda ...3 year GX engine warranty
‘Big Berty’ Bertolini triplex pump with 4 year
warranty
Robust stainless steel frame
Flat free tyres
FREE Aussie safety protection kit
Detergent injection
(not with hose reel option)
Pro accessories
Hose reel option available
Black Box
Monsoon 140 AB30
List price
1 Turbo lance Increase the effective working pressure (EWP) M4042100004 - ✓ ✓ $145
2 Foamer Spray detergents,& degreasers without the chemicals going through the pump MPA25152612 ✓ ✓ ✓ $137
3 15” Flat surface cleaner & 700mm lance
Clean flat surfaces fast, leaving a streak free finish, suits horizontal or vertical cleaning
FNA80166 + FNA7103261 ✓ ✓ ✓ $276
4 Tele-wand Ideal for reaching eaves & windows AGPDLTG18 ✓ ✓ ✓ $399
❶ ❷ ❸
❹
ESSENTIAL ACCESSORIES
AUSSIE MONSOON 140 (Industrial electric blaster)
Model Monsoon 140
S/code ABMONSS140
Pump pressure psi 2,000 (140 bar)
EWP with turbo psi 3,400
Flow lpm 9
Motor 240v, 2.2kW
Pump speed rpm 1450
Pump type Triplex
Pump Model WBL917
Nozzle size 035
Accessories - Hose 8m R1 wire braid
Gun AL13
Lance Vario
Weight kg 52
Boxed size LxWxH (mm) 680 x 580 x 550
$2,358
3,000 psi (4,785 psi EWP with turbo head)
‘Big Berty’ Bertolini triplex pump with 4
year warranty
Heavy duty 4 pole single phase electric
motor with 15 amp plug
Heavy duty on-off switch with overload
protection
Robust stainless steel frame
Flat free tyres
FREE Aussie safety protection kit
Detergent injection
AUSSIE BLACK BOX 30kgs of cleaning dynamite
Model Black Box
S/code FKB8.15
Pump pressure psi 1,800 (124 bar)
EWP with turbo psi 3,400
Flow lpm 8
Motor 240v 2.6kW
Pump speed rpm 1450
Pump type Triplex
Nozzle size 035
Accessories - Hose 8m R1 wire braid
Gun AL13
Lance Vario
Weight kg 30
Boxed size LxWxH (mm)
390x240x230
$1,055 Aussie Black Box mounted on a trolley (not assembled)
FKB8.15TR $1,248 Aussie Black Box mounted on a trolley with 15m hose reel kit (not assembled)
FKB8.15TRHR $1,746
Pro blaster for the price of a domestic
unit
3,400 EWP psi (effective working
pressure) with turbo
Triplex pump
Slow speed heavy duty 4 pole motor
Pro accessories
Compact design
FREE Turbo lance
Check Blaster Blitz for full range to 500 bar (7,200 psi)
AUSSIE BLASTER BLITZ COLD HIGH PRESSURE WATER BLASTERS
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 Page 57
All prices AU$ exclude gst, ex Sydney warehouse Specs subject to change without notice
2020 | Issue 1 (effective 1/11/19)
AUSSIE SUPER SCUD 3,000 psi & 4,000 psi … The contractor’s choice
Honda Petrol Yanmar Diesel
Model Scud 350 Scud 400 Scud 350 YDE Scud 400 YDE
S/code ABBSS350/GX390 ABBSS400/GX390 ABBSS350/L100E ABBSS400/L100E
Pump pressure (psi) 3,000 (200 bar) 4,000 (275 bar) 3,000 (200 bar) 4,000 (275 bar)
EWP with turbo (psi) 4,785 6,485 4,785 6,485
Flow (lpm) 15 15 15 13 Engine Honda GX390 Honda GX390 Yammar L100 Yammar L100
Horsepower 13HP 13HP 10HP 10HP Pump speed (rpm) 1450
Pump type Bertolini triplex
Pump Model TTL1520 TTL1330 TTL1520 TTL1330
Nozzle size 045 035 045 035
Accessories - Hose 10M R2 3/8” wire braid
Gun AL55
Lance 700 mm dual
Nozzle type 2 x Laser Cut nozzles
Weight with skid (kg) 110 110 160 160 Boxed dim with skid LxWxH (mm)
1100 x 800 x 950
Recoil start $3,490 $3,540
E start (E) $4,150 $4,490 $7,105 $7,491
13HP Honda with 3 year GX engine warranty
or Yanmar diesel with 2 year warranty
‘Big Berty’ Bertolini slow speed triplex pump
with 4 year warranty
Unique Stainless Steel Scud frame & anti vib
mounts, steel wheels with flat free tyres
FREE ASP (Aussie safety protection) kit
Detergent injection
Gearbox drive … longer life
Optional lifting/hose reel mount bar +$145
Easy fit 30m hose reel kit option … +$782
AUSSIE SCUD AB40 4,000 psi Premium Honda
Scud 40
Scud 350
Scud 400
List price
1 Turbo lance Increase the effective working pressure (EWP)
CTN400-_ _ _ 030 045 035 $364
2 20” Flat surface cleaner
Clean flat surfaces fast, leaving a streak free finish AGPDFSC20 ✓ ✓ ✓ $1,154
3 Tele-wand Ideal for reaching eaves & windows AGPDLTG18 ✓ ✓ ✓ $399
4 Drain cleaning kit
Clear chokes fast … Converts a blaster into a jetter ADRAINKIT ✓ ✓ $3,090
Model Scud AB40 S/code ABSS40/GX390
Pump pressure (psi) 4,000 (275 bar)
EWP with turbo (psi) 6,485
Flow (lpm) 13
Engine Honda GX390
Horsepower 13HP
Pump speed (rpm) 3200
Pump type Bertolini Triplex
Pump Model TMG4035
Nozzle size 030
Accessories - Hose 10m R2 wire braid
Gun AL55
Lance Dual
Nozzle type 2 x Laser Cut
Weight with skid (kg) 75
Boxed dim with skid LxWxH (mm) 1100 x 800 x 900
List price $3,090
AB40 with 30m hose reel fitted
ABSS40/GX390HR $3,647
13HP Honda …. 3 year Honda GX engine warranty
‘Big Berty’ Bertolini triplex pump with 4 year warranty
Robust stainless steel frame with flat free tyres
FREE Aussie safety protection kit
Detergent injection (not with hose reel option)
Pro accessories
Hose reel option available
❶
❸ ❹
ESSENTIAL ACCESSORIES
❷
AUSSIE BLASTER BLITZ COLD HIGH PRESSURE WATER BLASTERS
More online
Full data sheets with performance curves available for application selection
Australian Pump Industries (aussiepumps.com.au) - 02 8865 3500 All prices AU$ exclude gst, ex Sydney warehouse
Specs subject to change without notice Page 58
Global Leader
2020 | Issue 1 (effective 1/11/19)
4. SUBMERSIBLE PUMP TROUBLESHOOTING GUIDE
To prevent serious accidents, disconnect the power supply before inspecting the pump.
For online service demo search Tsurumi KTZ maintenance or click on You Tube image
Pump fails to start No power supplied Check power supply
Check circuit
Impeller obstructed Inspect pump and remove obstruction
Impeller obstructed Inspect pump and remove obstruction
Voltage drop Correct the voltage to rated voltage, or use an extension cable that meets the standard
50Hz model operated at 60Hz Check name plate and replace the pump
Strainer is obstructed and pump ran dry for a long time
Remove the obstruction
Fault in motor Repair motor or replace
Pump is picking up too much sedi-ment
Raise pump to prevent it from picking up sediment
Impeller is worn Replace
Hose is kinked or clogged Minimize the number of bends in hose. Place pump in meshed basket if a large amount of debris is present in water
Strainer is obstructed or buried Remove obstruction. Raise pump to prevent it picking up sediment
Motor operates in reverse Swap terminal connections in control box
Motor bearing may be damaged Replace bearing
Pump cavitating Review duty point of application and replace pump if necessary
Pump starts but stops immediately, causing the motor protector to activate
The pump’s head and volume is lower
Pump generates noise and vibration
Open circuit or poor connection of the cabtyre cable
GENERAL TERMS OF SALE
Page 59
GENERAL: Aussie Pump’s general terms of sale represent a statement of contracts to supply equipment between Australian Pump Industries Pty Ltd and its customers.
Prices
▪ Prices printed in the Aussie Pumps catalogue are current at date of issue and are subject to change without notice. Prices charged will be those ruling at the date of delivery.
▪ All retail prices quoted are recommendations only. There is no obligation to comply with these recommendations.
▪ The validity of any quote given by Aussie Pumps will be 30 calendar days unless stated otherwise in the quotation. We reserve the right to withdraw quotations in writing before the end of the validity period.
▪ In line with industry standard, minimum order value $50 +GST applies to all customer purchases.
Special Construction Products
▪ Pump sets, pressure cleaners or sprayers, or any other product, not listed as a standard product in the catalogue may be manufactured by Aussie Pumps against specific customer order and specification. These units are not eligible for return under the stock swap program.
▪ It is the purchaser’s responsibility to satisfy itself of the suitability of any special order products being built by Aussie Pumps for the buyer’s purpose based on the information provided by Aussie Pumps in its quotation.
▪ Special orders as described above are irrevocable and not subject to cancellation or deferment.
▪ Warranties applicable to special order products as described above are the same as that which applies to all standard Aussie Pumps product, other than for those items supplied to Aussie Pumps by third parties for which Aussie Pumps will assign the original supplier’s warranty to the buyer of the “special order product”.
Goods Returned Policy
▪ Return of goods for credit will not be accepted without our prior written approval. There is no obligation on the part of Australian Pump to accept goods returned for credit without prior approval. Return authority label must be attached to outside of box. Return is conditional upon the products being returned;
▪ Freight prepaid in unused condition and in original packaging. Obsolete products are not eligible for return.
▪ Products returned for credit must be unsoiled, undamaged, in resalable condition and not more than 12 months old.
▪ All returned products must be accompanied by a copy of the original delivery docket.
▪ A written statement including the original invoice number, the date of purchase and full reasons for the return.
▪ Credit value of the goods returned will be at the absolute discretion of Aussie Pumps and will be limited to the original amount invoiced for that product. A restocking charge, the amount of which shall be at the absolute discretion of Aussie Pumps but will be not less than 25% of the original price of the product, will be applied to cover restock, repackaging, documentation and administration charges.
Incorrectly Supplied, Missing or Damaged Goods
▪ Aussie Pumps must be notified, in writing, within three (3) working days of delivery of any goods incorrectly supplied so that prompt replacement with the correct products can be arranged.
▪ All deliveries should be inspected for missing or damaged goods before the buyer signs for the goods. Missing or damaged goods should be noted on the consignment note. Any claims for missing goods or for products supplied in damaged condition must be reported to Aussie Pumps, in writing, within three (3) working days for the claim to be considered. N.B. Our terms are ex works. Claims for damage in transit will not be considered.
Warranty
▪ All Aussie Pumps products are guaranteed to be free from faulty workmanship or material as detailed in the warranty card supplied with each product and as detailed in the operator’s manual that is supplied with the goods.
▪ All engine warranty claims should be made directly to the service agent for the engine manufacturer and warranty is subject to their terms & conditions.
▪ Federal battery warranty is covered by Ryde Batteries, 1300 133 980. Call to find their nearest nominated agent.
▪ Repairs carried out by Aussie Pumps Service Division on products outside the guarantee period are guaranteed to be free of faulty workmanship or material for a period of three (3) months after the repair.
▪ Warranty is deemed to apply to failures due to faulty workmanship or materials and does not apply to fair wear and tear, improper installation or application, the user’s failure to carry out maintenance, or as a result of the product’s use for purposes for which it was not designed.
▪ Aussie Pumps is not liable for any loss of profit or consequential or indirect special loss arising from defects in any of its products.
▪ Aussie Pumps will not be liable for damage or injury of any kind whatsoever arising directly or indirectly from product defects.
▪ Aussie Pumps’ liability under the terms of the company’s guarantee or warranty is limited to any one of the following:
▪ replacement of the product with a suitable equivalent
▪ repair of the product
▪ return of the product for refund of purchase price
▪ payment for the cost of having the product repaired
▪ supply of replacement services
▪ payment of the cost of having services supplied again
▪ Aussie Pumps reserves the right to choose the lowest cost option of the above.
N.B. All prices are ex works Castle Hill warehouse. If purchaser chooses to use our carrier insurance is purchaser’s responsibility. We do offer freight insurance at 2% of the value of the goods shipped.
DEMONSTRATION/FIELD DAY STOCK - In the event that goods are loaned to a customer for demonstration or display, the customer is responsible for return of the goods in BRAND NEW CONDITION. Any parts, labour or packaging required to put the loaned items back into brand new condition will be charged to the customer at normal rates.
N.B. The customer is deemed to be the person / customer to whom Australian Pump Industries loans the goods.
Due to our program of continuous product development Australian Pump reserves the right to alter specifications without notice.
Note:
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The benefits under the Aussie Pump warranty are in addition to other rights under Australian Consumer Law.
2020 | Issue 1
Recommended