2019 Road Components - servicearchive.sram.com · Detail A: Enclosure Guidelines and Mounting Angle...

FRAME FIT SPECIFICATIONS

GEN.0000000005923 Rev D © 2019 SRAM, LLC

2019 Road Components

S-Series

General Notes

All dimensions are in millimeters unless otherwise noted.

Images in this document are not to scale.

Your product's appearance may vary slightly from the images in this document.

Information in this document is subject to change without prior notice.

If you have any questions please contact your SRAM representative.

Table of ContentsElectronic ShiftersBlipBox

Dimensions without Elastic Band ...............7BlipBox

Dimensions with Elastic Band .................... 8BlipBox

Enclosure Guidelines .................................... 9

BlipsRemote Shift Buttons and Connector Dimensions .....................................................10

BlipClamp and BlipGripRemote Shifter Mounting ............................. 11

ClicsExtension Shift Buttons ............................... 12

Shift-Brake LeversRemote Shifter Connections ..................... 13

Front DerailleursFront Derailleur Clearance

SRAM 12 Speed .............................................15Front Derailleur Clearance

SRAM 11 Speed ..............................................16Front Derailleur Clearance

SRAM 11 Speed .............................................. 17Frame Chainstay Information

SRAM 12 Speed .............................................18

Frame Chainstay InformationSRAM 10 and 11 Speed ................................19

Braze-on Hanger Dimensions SRAM 12 Speed ............................................20

Braze-on Hanger DimensionsSRAM 10 and 11 Speed ................................21

Braze-on Hanger DimensionsFront Derailleur Interface ...........................22

Braze-on Hanger DimensionsFront Derailleur Interface ...........................23

Clamp-on Front Derailleur Mount DimensionsFront Derailleur Interface ........................... 24

Front Derailleur Position with Clamp AdapterSRAM 12 Speed ............................................25

Front Derailleur Position with Clamp AdapterSRAM 10 and 11 Speed ...............................26

Rear DerailleursHanger and Chainstay Specifications

All SRAM Road Rear Derailleurs ..............28Rear Derailleur Frame Clearance

All SRAM Road Rear Derailleurs ..............29

Hanger SpecificationsAll SRAM Road Rear Derailleurs ..............30

Frame Rear Dropout Clearance12 Speed Road Chain and Cassette ........31

Road CranksetsCrankarm and Chainring Frame Clearance

12 Speed .........................................................33Crankarm and Chainring Frame Clearance

12 Speed .........................................................34Crankset Frame Clearance

11 Speed .......................................................... 37

Crankset Frame Clearance11 Speed ..........................................................38

Crankset Frame Clearance11 Speed and Singlespeed ........................39

Crankset Frame Clearance8/9/10 Speed .................................................40

Spider Frame ClearanceQuarq DZero Platform Power Meters ...... 41

Spider Frame Clearance Quarq AXS Platform Power Meters ........42

Bottom Bracket Shell SpecificationsBSA and Italian Bottom Bracket

Road Bottom Bracket Frame Shell Specification .................................................44

T47 85.5Road Bottom Bracket Frame Shell Specification .................................................45

PressFit 30Road Bottom Bracket Frame Shell Specification .................................................46

PressFit Road 86.5Road Symmetric Frame Shell Specification ................................................. 47

BB30Information.....................................................48

DUB Bottom BracketsDUB BSA 68

Bottom Bracket Specification ...................50DUB T47 85.5

Bottom Bracket Specification ....................51DUB PressFit 30

Bottom Bracket Specification ...................52DUB PressFit 30 73-A

Bottom Bracket Specification ...................53

DUB PressFit 30 79-A Bottom Bracket Specification ...................54

DUB PressFit 30 83-ABottom Bracket Specification ...................55

DUB PressFit 86.5Bottom Bracket Specification ...................56

DUB BB386Bottom Bracket Specification ................... 57

DUB BB30Bottom Bracket Specification ...................58

DUB BB30 73-ABottom Bracket Specification ...................59

DUB BB30 83-ABottom Bracket Specification ...................60

BrakesSafety Guidelines for Rotor Size and Brake Pad Material

All SRAM Road Hydraulic Disc Brakes ...62SRAM Force eTap AXS

Disc Brake Hose Length Specification .63SRAM RED eTap AXS

Disc Brake Hose Length Specification ..64S-900 Aero HRD

Disc Brake Hose Routing Specification .65Flat Mount Fork Specification

All SRAM Flat Mount Calipers ...........66-68Post Mount Fork Specification

All SRAM Post Mount Calipers ...........69-70SRAM CenterLine XR

Two-piece Center Locking Rotor Dims ... 71SRAM CenterLine X

Two-piece Center Locking Rotor Dims .. 72

SRAM CenterLine One-Piece Center Locking Rotor Dims.. 73

SRAM CenterLine XRTwo-piece 6-Bolt Rotor Dims ................... 74

SRAM CenterLine XTwo-piece 6-Bolt Rotor Dims ................... 75

SRAM CenterLine One-piece 6-Bolt Rotor Dims ................... 76

Spoke ClearanceRoad Disc Brakes ......................................... 77

Dropbar GuidelinesRoad Electronic Shift-Brake ...................... 78

S-900 Aero HRDHydraulic Aero Brake Lever Bar .............. 79

BB7/ BB5 RoadMechanical Disc Brake Clearance ..........80

Front Rim Brake CaliperDirect Mount and Single Pivot Design Dimensions .....................................................81

Rear Rim Brake CaliperDirect Mount and Single Pivot Design Dimensions ....................................................82

Front Direct MountMounting Dimensions .................................83

Rear Direct MountMounting Dimensions .................................84

Direct MountRim Brake Caliper Design Dims ...............85

Single-Post MountRim Brake Caliper Design Dims ...............86

Shorty UltimateDual Mounted Brake Caliper .................... 87

Shorty 6/ Shorty 4Cable Carrier and Straddle Cable ...........88

Wheels and HubsZipp Wheels

Rim/Disc Design Parameters ....................90Rear Derailleur Wheel Spoke Clearance

XDR ...................................................................91Driver and Wheel Standard

10 and 11 speed ......................................92-93Zipp Hubs with Center Locking Disc Brake Mount

Front Hub Specifications ...........................94Rear Hub Specifications ............................95Front and Rear Hub Distance to Rotor ...96

Zipp Hubs with ISO 6 Bolt Disc Brake MountFront Hub Specifications ........................... 97Rear Hub Specifications ............................98

Zipp Rim Brake HubsFront Hub Specifications ...........................99Rear Hub Specifications .......................... 100

Maxle Description DecoderMaxle Ultimate

Frame / Fork Clearance .......................... 102Maxle Stealth

....................................................................... 103

Maxle Lite & MaxleFrame / Fork Clearance .......................... 104

Maxle, Maxle Lite, Maxle Ultimate, Maxle Stealth

Rear Frame Specification ........................ 105Fork Specification ...................................... 106Fork Specification .......................................107

6

Electronic Shifters

7

BlipBoxDimensions without Elastic Band

48.7540.25

34.5

17.2515

34.9

Custom Mounting without the Elastic Band Mounting Adapter

M4X0.7 3 mm deepMounting Interface

Side A Side B

R10 MIN

58.75

8

BlipBoxDimensions with Elastic Band

50.75

21.9

20.44 35.5

19

Ø54 MAX

Ø24 MIN

35.5

Elastic Band Mounting Adapter for Mounting to Cylindrical or Flat Surfaces

Elastic Band HooksCable Tie Pass Through

Side A Side B

R10 MIN

60.75

148

23

18

9

BlipBoxEnclosure Guidelines

Detail A: Enclosure Guidelines and Mounting Angle

BlipBox orientation for optimal performance in internal enclosure space:

1 Must be mounted within ± 25 ° from the horizontal plane.

2 The button can face upward or downward.

3 The wire input ports can face forward or backward.

4 The enclosure should not be 3 or more sides of the following materials: carbon, carbon plastic, metal, or water-filled reservoir.

See Detail A

Horizontal plane

4

2

3

Front of bike

25°

-25°

1

10

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextBlipsRemote Shift Buttons and Connector Dimensions

Ø2.5

Ø5.0

Left Shift Button Right Shift Button

Wire Lengths150230450650

1

1

2

31.35

1 Consider the connector diameter and wire length when routing wires internally.

2 Choose the wire lengths based on application and desired location of the Blips.

11

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextBlipClamp and BlipGripRemote Shifter Mounting

1

2

31.8 mm Bar

22.2-35 mm Bar

22.2mm TT Extensions

1 Button holder designed for 31.8 mm bar mounting.

2 Direct mount under the handlebar tape for 22.2 mm through 35 mm diameter bars.

12

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextClicsExtension Shift Buttons

Ø18.8

Fits Ø19 to Ø20 Bore

Outer Ø22.2 for Standard Round Extension

Wire Lengths500650

1 Internally mounted shifter setup requires the Blip or Clic wires to be routed external of bar, stem, and frame materials a minimum total of 100 mm per side for all the wires. Routing under bar tape is acceptable within the 100 mm length.

13

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextShift-Brake LeversRemote Shifter Connections

2

1

1 The left and right shifter brake each provide additional ports for auxiliary remote shifter buttons. SRAM Red eTap AXS has two ports, and SRAM Force eTap AXS had one port.

2 Use plugs when remote shifters are not in use.

3 Provide a small amount of slack in the wire for shifter brake repositioning.

4 Route the wires underneath the bar tape.

14

Front Derailleurs

15

Front Derailleur ClearanceSRAM 12 Speed

Front Derailleur in High GearFront Derailleur in Low Gear

Lorem ipsum

9.1

5.5

9.129

13.5Ø34.9

(8.7)

Bottom Bracket Axis

Frame Centerline Fixation Bolt Axis

Braze-on Mounting Face

12.5

61

37.25

23.5Improved Tire Clearance

3037.5

47.5

33

38

14

47.5

43

7

Fixation Bolt Axis

Hanger Contact Face

61

26.5

18

8.2

72

Fixation Bolt Axis

16

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

90.4

16

5.75

5 5

2921.2

16

25 25 25

34

Bottom Bracket Axis

Front Derailleur ClearanceSRAM 11 Speed

Front Derailleur in High GearFront Derailleur in Low Gear

Fixation Bolt Center

17

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Fixation Bolt Center

85.3

15.2

8.4

5 5

34.2 (upper hole)

27.7 (upper hole)

15.2

25 25 25

31

Bottom Bracket Axis

Front Derailleur ClearanceSRAM 11 Speed

Front Derailleur in High GearFront Derailleur in Low Gear

18

Frame Chainstay InformationSRAM 12 Speed

Minimum Chainstay Length A (mm) OLD* Hub Spacing (mm)

2x 405130, 135, and 142

1x 395

* Over Locknut Dimensions

A

19

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextFrame Chainstay InformationSRAM 10 and 11 Speed

WARNING CRASH HAZARDWhen the chain is on the big chainring and smallest rear cog, increased chain angle, increased chain angle can cause the chain to derail outboard off of the large chainring under very high pedaling loads, which may lead to a crash and serious injury and/or death to the rider.

Potential problems with not following the minimum chainstay length

ChainringMinimum Chainstay Length A (mm)

130 OLD* frames135 OLD frames w/ Wide Axle Cranks 135 OLD frames

2x11

55/42 395430

53/39

405

52/36 410

50/34 405

46/36 410

46/34 405

2x10

55/42395

430

54/42

53/39

405

52/36

52/38

50/34

46/36

*Over Locknut Dimensions

A

WARNING CRASH HAZARDWhen the chain is on the small chainring and smallest rear cog, reduced clearance between the chain and large chainring upshift rivets can cause the chain to unintentionally catch on the upshift rivets, which may lead to loss of control of the bicycle.

20

Braze-on Hanger Dimensions SRAM 12 Speed

B

Chainring Size Fixation Bolt Height B (mm)

2x

50-37 150.5

48-35 146.5

46-33 142.5

Nominal FD position provided, design should allow for adequate adjustment range in the FD hanger slot to account for tolerances.

Bottom Bracket Axis

21

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextBraze-on Hanger DimensionsSRAM 10 and 11 Speed

ChainringFixation Bolt Position

B (mm)

2x11

55/42 151

53/39 147

52/36 145

50/34 141

46/36 133

2x10

55/42 154 (lower hole)

54/42 152 (lower hole)

53/39 150 (lower hole)

52/36 148 (lower hole)

52/38 148 (lower hole)

50/34 152 (upper hole)

46/36 144 (upper hole)

B

Bottom Bracket Axis

22

Braze-on Hanger DimensionsFront Derailleur Interface

R7.6

4.5 3.2

+1.30

R5 0-0.1

Detail A

BB Shell Type BB Shell Width*(mm)

BB Shell Offset to Left Side*

(mm)

C(mm)

D(mm)

BSA/PressFit30/BB30 68 0 9 34

PF79-A 79 11 9 34

BB30-73A/PF30-73A 73 5 9 34

Italian 70 0 10 35

PressFit 86.5, BB386 86.5 0 18.25 43.25

* Dimensions provided for reference, see BB Shell Specifications.

(25)

C ±0.5

8.7 ±0.5Offset From Bottom Bracket Axis

D ±1.5Rear Wheel Axis

Rear Dropout Centerline

See Detail A

23

Braze-on Hanger DimensionsFront Derailleur Interface

(3.7)

Braze-on Hanger Axis

Braze-on Hanger Angle 61°-66°

6 ±0.5

90° ±0.2°

See Page 20 and 21. Refer to Dimension "B" to determine desired slot position and range.

To Rear Axle

24

Clamp-on Front Derailleur Mount DimensionsFront Derailleur Interface

Ø31.8 ±0.1Ø34.9 ±0.1

Seat Tube Center

61°-66°

To Rear Axle

25

Front Derailleur Position with Clamp AdapterSRAM 12 Speed

Bottom Bracket Axis

E

21

Chainring Size Clamp Height E (mm)

2x

50-37 135.5

48-35 131.5

46-33 127.5

Nominal FD position provided, design should allow for adequate adjustment range of the clamp along the seat tube to account for tolerances.

26

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextFront Derailleur Position with Clamp AdapterSRAM 10 and 11 Speed

Bottom Bracket Axis

E

21

ChainringLower Clamp Position

E (mm)

2x11

55/42 136

53/39 132

52/36 130

50/34 126

46/36 118

2x10

55/42 149

54/42 147

53/39 145

52/36 143

52/38 143

50/34 139

46/36 131

27

Rear Derailleurs

28

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

To Bottom Bracket Axis

30°-35°

7 MAX. 2

3

Hanger and Chainstay SpecificationsAll SRAM Road Rear Derailleurs

7-10

11.5-12.5

R8.5 MAX90°

24-28

Rear Derailleur Hanger and Chainstay

1 Chainstay should be designed for sufficient clearance to the chain when on the smallest cog to avoid contact between chain and chainstay when riding over a rough surface.

2 7 mm MAX applies where the chain crosses the chainstay while in the smallest cog and is an advisory to minimize the potential for chain contact with the chainstay during use.

3 Refer to the Frame Chainstay Information page for 1x and 2x chainstay length.

29

Rear Derailleur Frame ClearanceAll SRAM Road Rear Derailleurs

13

1

R32

67

67

To Bottom Bracket Axis

1 Keep this area clear for rear derailleur clearance.

30

Hanger SpecificationsAll SRAM Road Rear Derailleurs

Quick Release

Thru Axle

T (mm)

Quick Release 7-9

Thru Axle 3.5-5.5

T

Hanger Mounting Face

T T T

Hanger Mounting Face

Hanger Mounting Face

Hanger Mounting Face

31

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextFrame Rear Dropout Clearance12 Speed Road Chain and Cassette

130 and 135 mm 142 mm

Hub to Dropout Interface or Inner Most

Surface of the Frame

Hub to Dropout InterfaceInner Most Surface of the Frame

33 33

0 3.5 MAX

1 1

1 1

1 An XDR driver body compliant hub is required. Refer to http://xddriverbody.com/ for freehub driver body specifications.

32

Road Cranksets

33

Chainring Configuration L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor

50-37

47.5 59.5

76.8 102.4

190 37.8 39.9 47.7 60 60 14548-35 73.4 98.3

46-33 68.7 94

Crankarm and Chainring Frame Clearance 12 Speed

W1W4

W5

W6

L3

L1L2

L5

L4W3

Frame Centerline

34

Chainring Size L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor

52

47.5 59.5

108.7

190 40.1 43.3 60 60 145

50 104.6

48 100.6

46 96.6

44 92.5

42 88.5

40 84.4

38 80.4

36 76.4

Crankarm and Chainring Frame Clearance 12 Speed

W4W5

W6

L1 L2

L5

L4W1

Frame Centerline

35

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextCrankset Diagram11 Speed

W1W4

W5

W6

L3

L1L2

L5

L4W3

36

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextCrankset Diagram11 Speed and Singlespeed

W1W4

W5

W6

L1L2

L5

L4W1

37

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor BB Type

SRAM RED*/ SRAM Force/ SRAM RED Quarq Power Meters/ Quarq Prime Carbon Power Ready/S902/S952

55/4257.0 71.0

88.0 113.1

197.0

38.0

40.0

47.5

60.0 MIN 60.0 MIN 145

GXP BB30PF30

PFGXP

53/39 81.8 109.2 37.7

52/36

47.0 61.0

75.0 107.0

38.0 48.050/34 71.0 103.2

46/36 75.0 95.1

* Cranksets can be configured to fit BB386, BB30a, and BBright.

Wide Axle SRAM Rival/ S552

52/36

47.0 61.0

75.0 106.8

192.1 41.0 42.9 50.663.8

GXP/ PFGXP62.8 BB30

63.8 62.8 BB30

154.6 GXP/ PFGXP

152.4 BB30/ PF30

GXPBB30PF30

PFGXP50/34 71.0 103.1

SRAM Rival/ Quarq Prime Aluminum Power Ready

52/36

47.0 61.0

75.0 106.8

192.1 38.5 40.4 48.161.3

GXP/ PFGXP60.3

BB30/ PF30

61.3 GXP/ PFGXP

60.3 BB30/ PF30

149.6 GXP/ PFGXP

147.4 BB30/ PF30

GXPBB30PF30

PFGXP

50/34 71.0 103.1

46/36 75.0 95.1

SRAM S-390

50/34

57.3 61 71

103.1

191.5 40.4 42.4 50.1 62 62 149

GXPBB30PF30

PFGXP46/34 95.1

Crankset Frame Clearance11 Speed

38

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor BB Type Chainstay Length (mm)

SRAM Force 1

5457.0 72.0

112.2

197.0 38.0 43.7 60.0 60.0 145

GXP BB30PF30

PFGXP

≥ 395

52 108.2

50

47.0 62.0

104.1

48 100.1

46 96.1

44 92.0

42 88.0

40 84.0

38 79.9

SRAM Rival 1

50

47.0 62.7

104.1

192.1 38.0 43.7

61.3 GXP/ PFGXP

60.3 BB30/ PF30

61.3 GXP/ PFGXP

60.3 BB30/ PF30

149.6 GXP/ PFGXP

147.4 BB30/ PF30

GXPBB30PF30

PFGXP

≥ 395

48 100.1

46 96.1

44 92.0

42 88.0

40 84.0

38 79.9

SRAM Apex 1

44

49.0 61.0

92.0

191.7 41.3 43.7 62.0 62.1 149

GXPBB30PF30

PFGXP

≥ 39542 88.0

40 83.9

Crankset Frame Clearance11 Speed

39

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Chainring L1 (mm) L2 (mm) L4 (mm) L5 (mm) W1 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor BB Type Chainstay Length (mm)

SRAM S350-1

44

47.0 62.7

92.0

196.7 38.0 43.7 60.0 60.0 145GXP

BB30 PF30 PFGXP

≥ 39542 88.0

40 84.0

Omnium

48 64.5 78.0 99.1 195.4 35.5 42.5 55.0 54.7 145 GXP ≥ 395

Crankset Frame Clearance11 Speed and Singlespeed

40

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextCrankset Frame Clearance8/9/10 Speed

Chainring L1 (mm) L2 (mm) L3 (mm) L4 (mm) L5 (mm) W1 (mm) W3 (mm) W4 (mm) W5 (mm) W6 (mm) Q-Factor BB Type

SRAM Apex

53/39 57.0 71.0 81.0 109.2

196.7 38.0 40.0 47.3 60.0 60.0 145

GXP BB30PF30

PFGXP

50/34

47.0 61.071.0

103.2

48/34 99.0

46/36 75.0 95.1

Touro

53/39/30 29.0 41.0 63.0 109.2

190.5 38.5 40.5

48.0

61.0 59.0 145

Power Spline48 47.0

71.0

NA 99.0 NA

G5257.0 107.2 112.5 46.0

G53 Square

41

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextSpider Frame ClearanceQuarq DZero Platform Power Meters

Model L1 (mm) L2 (mm) L3 (mm) L4 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm) W5 (mm)

DZero 110

24.0 27.0

38.5 46.95

47.6 46.7 44.4 41.042.0

DZero 130 39.0 56.95

DFOUR 38.5 46.95 41.9

Cranksets can be configured to fit BB386, BB30a, and BBright.

DZero Carbon, DFour, and RED DZero crankset frame clearance is the same as SRAM Force. See 2x11 Crankset Frame Clearance page.

DZero Aluminum crankset frame clearance is the same as SRAM Rival. See 2x11 Crankset Frame Clearance page.

W1 W2 W3 W4 W5

L2

L3

L4

L1

Frame Centerline

42

Spider Frame Clearance Quarq AXS Platform Power Meters

L1 (mm) L2 (mm) L3 (mm) W1 (mm) W2 (mm) W3 (mm) W4 (mm)

24.0 27.0 37.2 48 46.7 44.3 40.7

Refer to Chainring Crankarm Clearance 1x, 2x for chainring and crankarm to frame clearance.

Consider clearance in this area if using a wide format BB shell such as BB386 or PressFit 86.5

L2

L1

L3W4

W1

W2

W3

Frame Centerline

43

Bottom Bracket Shell Specifications

44

BSA and Italian Bottom BracketRoad Bottom Bracket Frame Shell Specification

A B

Frame Centerline

Ø33 MIN

Non

-Driv

e Si

de (N

DS)

Driv

e Si

de (D

S)

W A B

BSA 68 68 ±0.5 BC 1.37" x 24 TPI R.H.* BC 1.37" x 24 TPI L.H.*

Italian 70 ±0.5 36 mm x 24 TPI R.H.

*Reference JIS B 0225

Frame Centerline

W ±0.5

(W/2)

2X 16 MIN

Ø33 MIN

A B

2X 60° MAX

2X Ø37 36

Z

Z

Section Z-Z

45

T47 85.5Road Bottom Bracket Frame Shell Specification

AN

on-D

rive

Side

(ND

S)

Driv

e Si

de (D

S)

Frame Centerline

85.5 ±0.5

42.75 ±0.5(42.75)

2X 14 MIN

Ø45.5 MIN

M47 x 1 - 4H LHM47 x 1 - 4H RH

2X 60° MAX

48.3 47.52X Ø

Z

Z

Section Z-Z

46

Ø0.1 A

Ø46 +0.0 -0.05

PressFit 30Road Bottom Bracket Frame Shell Specification

Dim W Dim DS Dim NDS

PF30 68 68 34

PF30 73-A 73 34 39

PF30 79-A 79 34 45

PF30 83-A 83 39 44

PF30 86.5 86.5 43.25

4

1 Dimensions apply after finishing.

2 Only dimensions essential to bottom bracket PressFit and function are shown. All other details are left to the discretion of the frame or component designer. Dimensions shown do not take the place of proper frame, bottom bracket shell, or crankset design.

3 PressFit surfaces should be unpainted.

4 PF30 79-A Only: Ø45.88-45.96

Z

Z

SRAM PressFit 30 (PF30) bottom brackets have been designed and tested to work within the bounds of the dimensions and tolerances in the shell specifications. Materials, manufacturing methods, and frame shell designs can potentially influence the performance of the bottom bracket, even when the shell is manufactured to these specifications. In these instances, it is recommended that bicycle manufacturers confirm the bottom bracket system performance when implemented in their design.

Things that should be considered when evaluating the frame and bottom bracket interaction include, but are not limited to:

• Loosening of the adapter cups from the bottom bracket shell (frame material choice can greatly affect friction coefficient).

• Binding of bearings within the bottom bracket.

For more information regarding PF30 bottom bracket technical information, contact your SRAM representative.

3

Ø44.5 MIN

W±0.25

DS±0.5

2X 13 MIN

(NDS)

Frame Centerline

Section Z-Z

Ø46 +0.0 -0.05

2X 45° MAX

2X Ø 49 47

4

4

A

Non

-Driv

e Si

de (N

DS)

Driv

e Si

de (D

S)

47

PressFit Road 86.5Road Symmetric Frame Shell Specification

1 Dimensions apply after finishing.

2 Only dimensions essential to bottom bracket PressFit and function are shown. All other details are left to the discretion of the frame or component designer. Dimensions shown do not take the place of proper frame, bottom bracket shell, or crankset design.

3 PressFit surfaces should be unpainted.

4 Tolerance applies to depth of 12 mm inboard from the outer face of each side.

Z

Z A

86.5±0.5

2X 12 MIN43.25±0.5(43.25)

Ø40 MINØ41 +0.0

-0.05

4

Ø41 +0.0 -0.05

4

42.4 41.62X Ø

2X 45° MAX

Non

-Driv

e Si

de (N

DS)

3 Frame Centerline

Section Z-Z

Driv

e Si

de (D

S)

Ø0.1 A

48

BB30Information

Information for the BB30 drawing and legal agreement can be found on www.BB30standard.com. Use of the information contained in the drawing is forbidden witthout reviewing and agreeing to the legal terms and conditions found on www.BB30standard.com. By using the information contained in the drawing you are certifying that you have agreed to the terms and conditions found within that legal agreement.

49

DUB Bottom Brackets

50

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB BSA 68Bottom Bracket Specification

(68 Assembled)

2X Ø45.5

Ø32.6 Ø32

16

2X 11.7

2X 10.8

15.4

Ø33.2 Ø33.4

51

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB T47 85.5Bottom Bracket Specification

(85.5 Assembled)

2X Ø52

Ø43.2 Ø36.8

20

2X 11.7

2X 2

14.8

Ø44.7 Ø44.8

52

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB PressFit 30Bottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(68 Assembled)

2X 122X 11.12X (Ø46)

2X Ø52 2X Ø44

Ø43.3Ø37

2X 1.25

53

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB PressFit 30 73-ABottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

12.5(73 Assembled)

11.1

12

2X 1.25

(2X Ø46)

2X Ø442X Ø52

Ø37Ø43.36.1

54

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB PressFit 30 79-A Bottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

11.25 (2X Ø46)

2X Ø52

Ø37

Ø44

Ø41.8

Ø39.3

19.9

1.5 1.25

11.1

12(79 Assembled)

55

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB PressFit 30 83-ABottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

11.25

2X Ø52

Ø37Ø39.3

(2X Ø46)Ø41.8

19.9

1.5(83 Assembled)

1.25

6.1

12.5

56

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB PressFit 86.5Bottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(2X Ø41)

2X Ø44

Ø34.6Ø39.8 2X 1.9

(86.5 Assembled)

2X 11.5

57

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB BB386Bottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(86.5 Assembled)

2X Ø52

Ø37

1

Ø39.3

Ø42

2X 17.52X 1.9

2X 11.25 2X (Ø46)

Ø43.5

58

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB BB30Bottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(68 Assembled)

2X 9.7 2X 11.12X (Ø42)

2X Ø47

Ø39.3

2X Ø44

2X 1.25

Ø37

59

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB BB30 73-ABottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(73 Assembled)

6.1Ø37

Ø39.3 (2X Ø42)

2X Ø44

1.3 1.3

11.1

2X 9.7

2X Ø47

60

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDUB BB30 83-ABottom Bracket Specification

1 Consider cable and hose clearances through the bottom bracket area of the frame.

(83 Assembled)

(No Center Tube)

6.1 (2X Ø42)

2X Ø44

1.3 1.3

11.1

2X 9.7

2X Ø47

61

Brakes

62

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextSafety Guidelines for Rotor Size and Brake Pad Material All SRAM Road Hydraulic Disc Brakes

Intended Use Brake pad material Minimum rotor size (mm)

Riding Type

Road Riding Organic 160

Closed Course Racing Organic or Metal Sintered 140

⚠WARNING - CRASH HAZARDSRAM disc brakes pass laboratory testing designed to simulate worst case riding conditions. The rotor size and pad compound materials recommendations were generated through controlled testing. Use of any combination not mentioned above will void the warranty and could result in a crash.

63

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

1

1

1 1

post mount SJ

�at mount SJ

SJ (Stealth-a-majig)

SRAM Force eTap AXS Disc Brake Hose Length Specification

Measured hose length

1 FG (Finished Good) hose equals the measured hose length from the hood/handlebar interface to the caliper plus 20 mm.

2 The SJ hose routing is from back to front of bike.

3 For internal routing, the SJ connection requires a hole in the frame or fork that is at least Ø5.1 mm.

4 Hose bend radius at 20° C = 30 mm minimum.

5 All surfaces that come in contact with brake hose to be free of burrs and sharp edges.

6 Stealth-a-majig for initial assembly only. A bleed is required if the system is disconnected and reconnected.

7 SRAM Brake systems are not compatible with mineral based fluids such as damping fluid, mineral oil, fork fluid, or RockShox Reverb fluid. Use only DOT 4 or DOT 5.1 fluids with SRAM Hydraulic brakes.

2

64

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextSRAM RED eTap AXSDisc Brake Hose Length Specification

1

1 1

post mount SJ

�at mount SJ

SJ (Stealth-a-majig)

1

Measured hose length

1 FG (Finished Good) hose equals the measured hose length from the hood/handlebar interface to the caliper plus 10 mm.

2 The SJ hose routing is from back to front of bike.

3 For internal routing, the SJ connection requires a hole in the frame or fork that is at least Ø5.1 mm.

4 Hose bend radius at 20° C = 30 mm minimum.

5 All surfaces that come in contact with brake hose to be free of burrs and sharp edges.

6 Stealth-a-majig for initial assembly only. A bleed is required if the system is disconnected and reconnected.

7 SRAM Brake systems are not compatible with mineral based fluids such as damping fluid, mineral oil, fork fluid, or RockShox Reverb fluid. Use only DOT 4 or DOT 5.1 fluids with SRAM Hydraulic brakes.

2

65

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextS-900 Aero HRDDisc Brake Hose Routing Specification

1

1

1

1 FG (Finished Good) hose equals the hose length from the hood/handlebar interface to the caliper.

2 The SJ hose routing is from back to front of bike.

3 For internal routing, the SJ connection requires a hole in the frame or fork that is at least Ø5.1 mm.

4 Hose bend radius at 20° C = 30 mm minimum.

5 All surfaces that come in contact with brake hose to be free of burrs and sharp edges.

6 Stealth-a-majig for initial assembly only. A bleed is required if the system is disconnected and reconnected.

7 SRAM Brake systems are not compatible with mineral based fluids such as damping fluid, mineral oil, fork fluid, or RockShox Reverb fluid. Use only DOT 4 or DOT 5.1 fluids with SRAM Hydraulic brakes.

2

66

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Co-planar mount-ing surfaces

40° max dropout

angle

MIN 10 mm depth2X M5x0.8-6H

23.5 ±0.15

11 ±0.15

Dropout to mounting face

See hub specification for drop-out face to rotor mounting face dimension

70 ±0.15

Bolt hole spacing

Internal routing hose hole position

140 MIN

MIN 13 mm Boss diameter

1.7±0.4

Dropout face to hole pattern centerline

1 Minimum internal routing hole position does not apply to Connect-a-majig.

Flat Mount Fork Specification All SRAM Flat Mount Calipers

All surfaces that come in contact with brake hose to be free of burrs and sharp edges.

67

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

16 ±0.15

Rear mount thickness10, 15, 20, 25, 30, or 35 ±0.5

See hub specification for dropout face to rotor mounting face dimension

All surfaces that come in contact with brake hose to be free of burrs and sharp edges.

Underside of boss to accommodate 11 mm diameter washer.

2X 2.05 ±0.4 Dropout face to outboardmost mounting location

34 ±0.15

Slot spacing36.5 ±0.15

Rear slot centerline to axle centerline

2X 3Slot width

+0.5-1.0

2X 5.2 ±0.1

2X Ø14 MINBoss diameter

1 Frame and caliper interface may reach 120°C.

2 Minimum internal routing hole position does not apply to Connect-a-majig.

Internal routing hose hole position

140 MIN

Flat Mount Frame Specification All SRAM Flat Mount Calipers

MIN dropout angle 69°

68

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

5-7 mm

⚠WARNING - CRASH HAZARDThere must be 5-7 mm of mounting bolt thread engagement when mounting brake calipers to forks and frames with flat mount hardward and brackets. Riding a bike with improper bolt engagement can allow the brakes to disengage from the bicycle, which can lead to a crash and serious injury or death to the rider.

1 Available in rear bolt lengths: 17, 22, 27, 32, 37, and 42 mm

Flat Mount Frame Specification All SRAM Flat Mount Calipers

69

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextPost Mount Fork Specification All SRAM Post Mount Calipers

Fork Mount Dropout Fork Mount

0 mm Dropout

C

Direct mount rotor size A (mm) B(mm) C (mm)

140 mm 47.2 2.20.94

160 mm 56.0 6.8

74.2 ±0.1

A

B

90°

70

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Chainstay Mount Seatstay Mount

Direct mount rotor size A (mm) B(mm)130 and 135 QR 142 and 148 Thru

C (mm)

140 mm 47.2 2.25.7 9.2

160 mm 56.0 6.8

Frame Mount Dropout

0 mm Dropout

C

90°

Post Mount Frame Specification All SRAM Post Mount Calipers

74.2 ±0.1

A

90°

B

B

74.2 ±0.1

A

71

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

1 Lockring torque to 40 N·m (354 in-lb).B

Rotation

Ø40.3

Rotor Rotor SizeRadiused Outer Diameter Rotor Thickness Carrier Diameter

A (mm) B (mm) C (mm)

CLX- R140 140 1.90 100

160 160 1.85 120

SRAM CenterLine XRTwo-piece Center Locking Rotor Dimensions

Z

10.8Rotor mounting face

to lockring spline

7X 0.3Rotor outer face

to rivet flange 7X 2.6Rotor inner face to rivet flange

Section Z-Z

A

C

72

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

1 Lockring torque to 40 N·m (354 in-lb).B

7X 0.3Rotor outer face

to rivet flange7X 2.6Rotor inner face to rivet flange

10.8Rotor mounting face

to lockring spline

Ø40.3

SRAM CenterLine XTwo-piece Center Locking Rotor Dimensions

Rotor Rotor SizeRadiused Outer Diameter Rotor Thickness Carrier Diameter

A (mm) B (mm) C (mm)

CLX140 140 1.90 90.1

160 160 1.85 110.1

Z

Rotation

Section Z-Z

A

C

73

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Rotor sizeRadiused Outer Diameter Rotor Thickness

A (mm) B (mm)

140 mm 1401.85

160 mm 160

SRAM CenterLine One-Piece Center Locking Rotor Dimensions

1 Lockring torque to 40 N·m (354 in-lb).

A

B

10.8Rotor mounting face

to lockring spline

Rotation

Ø38

Z

Section Z-Z

74

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Rotor Rotor SizeRadiused Outer Diameter Rotor Thickness Carrier Diameter

A (mm) B (mm) C (mm)

CLX- R140 140 1.90 100

160 160 1.85 120

1 Rotor mounting bolt torque value is 6.2 N·m (55 in-lb).

⚠WARNING2 Use only 10 mm length rotor bolts. Rotor bolts longer

than 10 mm will not properly secure rotor and could damage the hub.

A

B

6X Ø5.5 thru equally spaced

Ø54.5 MAXRotor mounting

flange to ensure clearance

C

Z

Ø33.9Maximum for clearance

Rotation

SRAM CenterLine XRTwo-piece 6-Bolt Rotor Dimensions

7X 0.3Rotor outer face

to rivet flange 7X 2.6Rotor inner face to rivet flange

Ø44Bolt circle

Section Z-Z

75

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

B

7X 0.3Rotor outer face

to rivet flange 7X 2.6Rotor inner face to rivet flange

Ø54.5 MAXRotor mounting flange to

ensure clearance

Rotation

SRAM CenterLine XTwo-piece 6-Bolt Rotor Dimensions

Rotor Rotor SizeRadiused Outer Diameter Rotor Thickness Carrier Diameter

A (mm) B (mm) C (mm)

CLX140 140 1.90 90.1

160 160 1.85 110.1

Z

1 Rotor mounting bolt torque value is 6.2 N·m (55 in-lb).

⚠WARNING2 Use only 10 mm length rotor bolts. Rotor bolts longer

than 10 mm will not properly secure rotor and could damage the hub.

A

6X Ø5.5 thru equally spaced

Ø44Bolt circle

C

Ø33.9Maximum for clearance

Section Z-Z

76

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

Rotor sizeRadiused Outer Diameter Rotor Thickness

A (mm) B (mm)

140 mm 1401.85

160 mm 160

A

B

6X Ø5.5 thru equally spaced

Ø44Bolt circle

Ø33.9Maximum for clearance

Rotation

1 Rotor mounting bolt torque value is 6.2 N·m (55 in-lb).

⚠WARNING2 Use only 10 mm length rotor bolts. Rotor bolts longer

than 10 mm will not properly secure rotor and could damage the hub.

SRAM CenterLine One-piece 6-Bolt Rotor Dimensions

Z

Section Z-Z

77

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

95 MIN

10 MIN

38 MIN

Spoke ClearanceRoad Disc Brakes

140 ± 0.5

61 MAX

19.12 MIN18.26 MIN

Hub Axis

Rotor Mounting Face

20.09 MIN

Spoke clearance

160 ± 0.5

1

1 Wheel designer to determine the safe clearance distance from the caliper to account for wheel flex and tolerance stack.

2 Caliper body will not extend beyond this datum. Datum accounts for caliper manufacturing tolerances and variation in pad advancement.

3 Caliper position shown for 160 mm rotor.

3

2

78

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDropbar GuidelinesRoad Electronic Shift-Brake

Ø23.8-24.2 mm

79

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextS-900 Aero HRDHydraulic Aero Brake Lever Bar Guidelines

Ø19.5-21.0 mm

Unobstructed minimum insertion of 25 mm

80

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextBB7/ BB5 RoadMechanical Disc Brake Clearance

14.23

22.20

11.5

4

2

26.2647.91

15°

81

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextFront Rim Brake CaliperDirect Mount and Single Pivot Design Dimensions

Brake Caliper Pivot Location

700 CA -30 0 25 50

B ±2SRAM DM Front 335.9 339 339.5 338

SRAM SP Front 349 353.5 355 354.5

1 For increased tire clearance, make mounting features to the + side of the "B" dimension tolerance limit.

2 For 650c wheels, subtract 26 mm from the 700c "B" dimensions.

3 Mount only to the front side of the fork.

A

(+) (-)

90°

B ±2700 C Front

A

(+) (-)

90°

B ± 2

SRAM SP Front

SRAM DM Front

DIM A (mm)

DIM

B (m

m)

40 5020 30100-30 -20 -10

340

335

355

345

350

Direct Mount Front Rim Brake Caliper Single Pivot Front Rim Brake Caliper

2 2

82

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextRear Rim Brake CaliperDirect Mount and Single Pivot Design Dimensions

Brake Caliper Pivot Location

700 CA -30 0 25 50

B ±2SRAM DM Front 335.9 339 339.5 338

SRAM SP Front 349 353.5 355 354.5

1 For increased tire clearance, make mounting features to the + side of the "B" dimension tolerance limit.

2 For 650c wheels, subtract 26 mm from the 700c "B" dimensions.

3 Mount only to the back side of the seatstay. Do not mount under bottom bracket or on the front side of the seatstay.

A

(-) (+)

90°

B ±2

Direct Mount Rear Rim Brake Caliper Single Pivot Rear Rim Brake Caliper

A

(-) (+)

90°

B ±2700 C Rear

SRAM SP Front

SRAM DM Front

DIM A (mm)

DIM

B (m

m)

40 5020 30100-30 -20 -10

340

335

355

345

350

2 2

83

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextFront Direct MountMounting Dimensions

1 Center the posts between the dropouts within ±0.5 mm.

149 ±0.3

2X Ø13 MINBrake Mounting Surface

1 Counterbore

Depth

9.7 MIN Tap Drill

SECTION Z - Z

Brake Pad Clearance

Front Wheel Axis

14.4 MAX

43 MIN11.5 MIN

Ø8

Z

Z

"B"56 MIN

( - ) ( + )

"A"

2X M6x1-6H7.5 MIN Thread Depth

84

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextRear Direct MountMounting Dimensions

1 Center the posts between the dropouts within ±0.5 mm.

49 ±0.3

2X Ø13 MINBrake Mounting Surface

1 Counterbore

Depth

9.7 MIN Tap Drill

SECTION Z - Z

2X M6x1-6H7.5 MIN Thread Depth

Brake Pad Clearance

Rear Wheel Axis

1

14.4 MAX

43 MIN11.5 MIN

Ø8Z

Z

56 MIN

( - )

( + )"A"

"B"

85

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

24

2418

26.526.5

18

34

34

Direct MountRim Brake Caliper Design Dimensions

Front Rim Brake Caliper Rear Rim Brake Caliper

86

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextSingle-Post MountRim Brake Caliper Design Dimensions

39

39

29

33

27

27

29

3349

49

Front Rim Brake Caliper Rear Rim Brake Caliper

87

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextShorty UltimateDual Mounted Brake Caliper

90° (recommended)

250 mm straddle wire (recom-mended)

145 mm to top of cable hanger

79-82 mm brake boss spac-

ing

1 For wheel rims wider than 23 mm, consult the spare parts catalog on www.sram.com/service for part numbers.

18-23 mm rim width*

88

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextShorty 6/ Shorty 4Cable Carrier and Straddle Cable Length

Length of straddle cable

Opening angle of straddle cable

Designed width of Shorty Total height Designed height Total width

Pivot width Opening

A (mm) C D (mm) H (mm) h (mm) W (mm)

CCC Type S 63 100°

31.78

92.94

56.80

51.61 63.21 39.65

CCC Type A 73 95° 106.12 53.82 67.64 44.08

CCC Type B 82 87° 116.28 56.45 72.89 49.33

CCC Type C 106 80° 138.00 68.14 96.27 72.71

CCC Type D 93 90 122.56 65.76 91.52 67.96

79- 82 mm brake boss spacing

18-23 mm rim width

89

Wheels and Hubs

90

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextZipp WheelsRim/Disc Design Parameters

MAX Width Depth at MAX Width MAX Depth Radius to Center

Axis

A (mm) B (mm) C (mm) R1 (mm)

30 Course CC

25

10.00

26.00

316.60

30 Course TU 316.25

30 Course CC DB5.45

316.60

30 Course TU DB 316.25

202 Firecrest & NSW CC 25.65 13.0132.54 316.62

202 TU 22.86 8.23

202 Firecrest & NSW Tubeless DB 28.65 8.42 32.00 316.67

302 CC RB & DB 26.50 14.89 26.50 326.45

303 Firecrest & 303 NSW CC 28.25 19.45 46.60 316.62

303 NSW Tubeless DB

29.88 21.90 45.50

316.67

303 Firecrest 650b Tubeless DB 297.95

303 Firecrest Tubeless DB 316.67

303 Firecrest TU 28.25 19.08 46.60

316.62404 Firecrest & NSW CC 27.8 26.0658.75

404 Firecrest TU 27.32 25.13

404 Firecrest & NSW Tubeless DB 26.99 19.84 58.75 316.73

808 Firecrest & 808 NSW CC 27.8 50.05 81.82 316.62

808 Firecrest & NSW Tubeless DB 28.02 35.10 82.50 316.66

808 Firecrest TU 27.17 49.77 81.82

316.62900 TU DB 21.28

NA NASuper-9 CC DB28.25

Super-9 TU DB 317.54

CC: Carbon ClincherTU: Tubular

DB: Disc Brake

Center Axis of Wheel

Frame clearance 4 mm MIN per side

A

B

C

R1

91

Rear Derailleur Wheel Spoke ClearanceXDR

1 Refer to http://xddriverbody.com/ for freehub driver body specifications.

2.6

18

6

Ø440

Keep area outboard of line clear for cassette and rear derailleur operation. Deflection is not accounted for.

Dropout Distance (42.4) 130 and 135 OLD

(45.9) 142 OLD

1

Ø100

Ø85

Ø46

92

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDriver and Wheel Standard10 and 11 speed

Installation space border for drivetrain

Spoke clearance MIN 7 at 75 mm offset from wheel center

7

75

Dropout distance 10 sp: 40.611 sp: 42.4

+1-0.3±0.2

MAX recess 1Transition Start MAX 0.5

Detail A: Scale 5:1

See Detail A

93

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextDriver and Wheel Standard10 and 11 speed

Detail B: Scale 10:1See Detail B

MAX R1

MAX R0.3

MAX R0.3

MAX R0.4

Ø 38 +4-1

94

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A (mm) B (mm) C (mm) E (mm)

9x10 Quick Release Hub

100.0 ± 0.75

Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 8.85 ± 0.05

12x100 Thru Axle Hub Ø 12.0 + 0.1Ø 18.7 ± 0.1 N/A

15x100 Thru Axle Hub Ø 15.0 + 0.1

Zipp Hubs with Center Locking Disc Brake MountFront Hub Specifications

Quick Release Hub Thru Axle Hub

B E C

A

B C

A

95

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A (mm) B (mm) C (mm) E (mm) F (mm)

10x135 Quick Release Hub135.0 ± 0.5

Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 9.85 ± 0.0542.4 ± 0.2

12x135 Thru Axle HubØ 12.0 + 0.1 Ø 18.7 ± 0.1 N/A

12x142 Thru Axle Hub 142.0 ± 0.5 45.9 ± 0.2

Zipp Hubs with Center Locking Disc Brake MountRear Hub Specifications

Quick Release Hub Thru Axle Hub

EB C

AF

C

AF

B

96

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

D (mm) E (mm)

CLX CLX-R CLX CLX-R

9x10 Quick Release Hub

19.5

8.5 9.0

12x100 Thru Axle Hub

15x100 Thru Axle Hub

10x135 Quick Release Hub24.25

12x135 Thru Axle Hub

12x142 Thru Axle Hub 27.25

Zipp Hubs with Center Locking Disc Brake MountFront and Rear Hub Distance to Rotor

D

E

Detail A

Detail A: Scale 5:1

97

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A (mm) B (mm) C (mm) D (mm) E (mm)

9x100 Quick Release Hub

100.0 ± 0.75

Ø 5.3 ± 0.1 Ø 19.5 ± 0.1

10.5 ± 0.3

Ø 8.85 ± 0.05

12x100 Thru Axle Hub Ø 12.0 + 0.1 Ø 19.0 ± 0.1

N/A15x100 Thru Axle Hub Ø 15.0 + 0.1Ø 19.5 ± 0.1

9x100 Thru-bolt Hub Ø 9.0 + 0.1

Zipp Hubs with ISO 6 Bolt Disc Brake MountFront Hub Specifications

Quick Release Hub Thru Axle and Thru-bolt Hub

B E C

A

D

B C

A

D

98

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A (mm) B (mm) C (mm) D (mm) E (mm) F (mm)

10x135 Quick Release Hub135.7 ± 0.3/-1.0

Ø 5.3 ± 0.1 Ø 19.5 ± 0.115.5 ± 0.2

Ø 9.85 ± 0.0542.4 ± 0.2

12x135 Thru Axle HubØ 12.0 + 0.1 Ø 19.0 ± 0.1

N/A12x142 Thru Axle Hub 142.7 ± 0.3/-1.0 19.0 ± 0.2 45.9 ± 0.2

10x135 Thru-bolt Hub 135.7 ± 0.3/-1.0 Ø 10.0 + 0.1 Ø 19.5 ± 0.1 15.5 ± 0.2 42.4 ± 0.2

Zipp Hubs with ISO 6 Bolt Disc Brake MountRear Hub Specifications

Quick Release Hub Thru Axle and Thru-bolt Hub

EB C

AF D

C

AF D

B

99

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

9x100 Quick Release HubA (mm) B (mm) C (mm) E (mm)

100 ± 0.75 Ø 5.3 ± 0.1 Ø 18.3 MAX Ø 8.85 ± 0.05

Zipp Rim Brake HubsFront Hub Specifications

E C

A

B

100

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

10x130 Quick Release Hub

A (mm) B (mm) C (mm) E (mm) F (mm)

130.7 ± 0.3/-1.0 Ø 5.3 ± 0.1 Ø 19.5 ± 0.1 Ø 9.85 ± 0.05 42.4 ± 0.2

Zipp Rim Brake HubsRear Hub Specifications

EB C

AF

101

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextMaxle Description Decoder

Platform: Axle Model: Maxle Ultimate Orientation: Front Length: 148 mm Thread Length: 9 mm Thread Diameter: 15 mm Thread Pitch: 1.5 mm

Length

Thread Length

Thread Diameter

Thread Pitch

AX MAXLE ULT FRONT L148 TL9 M15 X 1.5

102

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextMaxle Ultimate Frame / Fork Clearance

Ø 24

65.24

7.62

21.5921.59

30.77

62.96

Lever in Closed Position

Lever in Open Position

1 Drawing is not to scale.

2 Customer is responsible for ensuring hub, frame, and axle compatibility.

3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies using Maxles are compliant with existing safety standards.

4 Head translates along the Maxle axis approximately 1.46 mm when lever is moved from open to closed.

103

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextMaxle Stealth

Ø 19

SEE TABLE

Description Hex Size Torque Value

Maxle 12 5 9-13.5 N•m

Maxle 15 6 9-13.5 N•m

1 Drawing is not to scale.

2 Customer is responsible for ensuring hub, frame, and axle compatibility.

3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies using Maxles are compliant with existing safety standards.

104

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextMaxle Lite & MaxleFrame / Fork Clearance

Lever in Closed Position

Lever in Open Position

17.8

6 mm hex Torque to 4.5 N·m (+/-0.2) [39.8 in-lb (+/-1.8)]

64.5

Ø25

22.5

1.9

7

6°

Ø 28

1 Drawing is not to scale.

2 Customer is responsible for ensuring hub, frame, and axle compatibility.

3 The frame manufacturer is responsible for ensuring the frame and/or fork assemblies using Maxles are compliant with existing safety standards.

105

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A

A

Maxle, Maxle Lite, Maxle Ultimate, Maxle StealthRear Frame Specification

16 MIN16 MIN

Section A-A

24 MIN Flat SurfaceØ 12

Frame Dropouts with Axle Installed

OLD

106

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental TextMaxle, Maxle Lite, Maxle Ultimate, Maxle StealthFork Specification

Description A B

MAXLE 15 14.98 M15 X 1.5 - 6H

MAXLE 12 12.03 M12 X 1.5 - 6H

Section A - A

Ø A ±0.03

1015

B

A

A

6.9

Ø A ±0.03

Ø23 MINFlat Surface and ThruAxle Head Clearance

OLD

107

Sub-Section Title - Shift+Ctrl Click to unlock and edit textSupplemental Text

A24 MIN Flat Surface

A

Maxle, Maxle Lite, Maxle Ultimate, Maxle StealthFork Specification

Ø 15.01

14.95

24 MIN15.9±0.1

24 MIN

OLD

Section A-A

M15 X 1.5 - 6H

These are registered trademarks of SRAM, LLC:

1:1®, Accuwatt®, Avid®, Bar®, Blackbox®, BoXXer®, DoubleTap®, Elita®, eTap®, Firecrest®, Firex®, Grip Shift®, GXP®, Hammerschmidt®, Holzfeller®, Hussefelt®, i-Motion®, Judy®, Know Your Powers®, NSW®, Omnium®, Pike®, PowerLock®, Quarq®, Qollector®, RacerMate®, Reba®, Rock Shox®, Ruktion®, Service Course®, ShockWiz®, SID®, Single Digit®, Speed Dial®, Speed Weaponry®, Spinscan®, SRAM®, SRAM APEX®, SRAM EAGLE®, SRAM FORCE®, SRAM RED®, SRAM RIVAL®, SRAM VIA®, Stylo®, Torpedo®, The Power of Bicycles®, Truvativ®, Varicrank®, Velotron®, World Bicycle Relief®, X0®, X01®, X-SYNC®, XX1®, Zed tech®, ZIPP®

These are registered logos of SRAM, LLC:

These are trademarks of SRAM, LLC:

10K™, 1X™, 202™, 30™, 35™, 302™, 303™, 404™, 454™, 808™, 858™, 3ZERO MOTO™, ABLC™, AeroGlide™, AeroBalance™, AeroLink™, Airea™, Air Guides™, AKA™, AL-7050-TV™, Automatic Drive™, Automatix™, AxCad™, Axial Clutch™, AXS™, BB5™, BB7™, BB30™, Bleeding Edge™, Blipbox™, BlipClamp™, BlipGrip™, Blips™, Bluto™, Bottomless Tokens™, Cage Lock™, Carbon Bridge™, Centera™, Charger 2™, Charger™, Clickbox Technology™, Clics™, Code™, Cognition™, Connectamajig™, Counter Measure™, DD3™, DD3 Pulse™, DebonAir™, Deluxe™, Deluxe Re:Aktiv™, Descendant™, DFour™, DFour91™, Dig Valve™, DirectLink™, Direct Route™, DOT 5.1™, Double Decker™, Double Time™, Dual Flow Adjust™, Dual Position Air™, DUB™, DZero™, E300™, E400™, Eagle™, E-Connect4™, E-matic™, ErgoBlade™, ErgoDynamics™, ESP™, EX1™, Exact Actuation™, Exogram™, Flow Link™, FR-5™, Full Pin™, Gnar Dog™, Guide™, GX™, Hard Chrome™, Hexfin™, HollowPin™, Howitzer™, HRD™, Hybrid Drive™, Hyperfoil™, i-3™, Impress™, Jaws™, Jet™, Kage™, Komfy™, Level™, Lyrik™, MatchMaker™, Maxle™, Maxle 360™, Maxle DH™, Maxle Lite™, Maxle Lite DH™, Maxle Stealth™, Maxle Ultimate™, Micro Gear System™, Mini Block™, Mini Cluster™, Monarch™, Monarch Plus™, Motion Control™, Motion Control DNA™, MRX™, Noir™, NX™, OCT™, OmniCal™, OneLoc™, Paragon™, PC-1031™, PC-1110™, PC-1170™, PG-1130™, PG-1050™, PG-1170™, Piggyback™, Poploc™, Power Balance™, Power Bulge™, PowerChain™, PowerDomeX™, Powered by SRAM™, PowerGlide™, PowerLink™, Power Pack™, Power Spline™, Predictive Steering™, Pressfit™, Pressfit 30™, Prime™, Qalvin™, R2C™, RAIL™, Rapid Recovery™, Re:Aktiv ThruShaft™, Recon™, Reverb™, Revelation™, Riken™, Rise™, ROAM™, Roller Bearing Clutch™, RS-1™, Sag Gradients™, Sawtooth™, SCT - Smart Coasterbrake Technology, Seeker™, Sektor™, SHIFT™, ShiftGuide™, Shorty™, Showstopper™, Side Swap™, Signal Gear Technology™, SL™, SL-70™, SL-70 Aero™, SL-70 Ergo™, SL-80™, Sl-88™, SLC2™, SL SPEED™, SL Sprint™, Smart Connect™, Solo Air™, Solo Spoke™, SpeedBall™, Speed Metal™, SRAM APEX 1™, SRAM Force 1™, SRAM RIVAL 1™, S-series™, Stealth-a-majig™, StealthRing™, Super-9™, Supercork™, Super Deluxe™, Super Deluxe Coil™, SwingLink™, SX™, SX Eagle™, TaperCore™, Timing Port Closure™, Tool-free Reach Adjust™, Top Loading Pads™, Torque Caps™, TRX™, Turnkey™, TwistLoc™, Tyrewiz™, VCLC™, Vivid™, Vivid Air™, Vuka Aero™, Vuka Alumina™, VukaBull™, Vuka Clip™, Vuka Fit™, Wide Angle™, WiFLi™, X1™, X5™, X7™, X9™, X-Actuation™, XC™, X-Dome™, XD™, XD Driver Body™, XDR™, XG-1150™, XG-1175™, XG-1180™, XG-1190™, X-Glide™, X-GlideR™, X-Horizon™, XLoc Sprint™, XX™, Yari™, Zero Loss™

Specifications and colors subject to change without prior notice.© 2019 SRAM, LLC

ASIAN HEADQUARTERS SRAM Taiwan No. 1598-8 Chung Shan Road Shen Kang Hsiang, Taichung City Taiwan R.O.C.

WORLD HEADQUARTERS SRAM LLC 1000 W. Fulton Market, 4th Floor Chicago, Illinois 60607 U.S.A.

EUROPEAN HEADQUARTERS SRAM Europe Paasbosweg 14-16 3862ZS Nijkerk The Netherlands