View
1
Download
0
Category
Preview:
Citation preview
• Input De vic e s
• 3D De sig n &
Pre se nta tion Tools
• He a t Pre sse s
• CNC Ma c hine s
• Route rs
• 3D Printe rs
• La se r Eng ra ve rs/ Printe rs/ Cutte rs
• Custom La b Environme nts
2017
FAB LAB/
MAKER SPACE pla nning g uide
58 Ea st So uth Stre e t PO Bo x 388 Ro ssville , IN 46065
To ll fre e : 800-251-9935 Fa x: 815-230-7967
info @ a id e x.c o m www.a id e x.c o m
ABOUT US Fo r o ve r 12 ye a rs, Aid e x ha s p ro vid e d inno va tive , te c hno lo g y-b a se d e d uc a tio na l syste ms a nd
p ro fe ssio na l re so urc e s to sc ho o ls, c o lle g e s, a nd unive rsitie s a c ro ss Illino is, Ind ia na , Io wa , Ka nsa s,
Misso uri a nd Ne b ra ska . As o ne o f the mo st hig hly re sp e c te d e d uc a tio n se rvic e p ro vid e rs in the
ind ustry, Aid e x o ffe rs c o mp le te turnke y so lutio ns fo r ne w c o nstruc tio n o r re no va te d e d uc a tio n
la b s, a s we ll a s c usto mize d te c hnic a l e q uip me nt tra ining .
To d a y’ s te a c hing a nd le a rning to o ls ha ve e xp a nd e d we ll b e yo nd the b la c kb o a rd . Fro m
inte ra c tive multime d ia to p ro je c t-b a se d le a rning . Te c hno lo g y is e na b ling e d uc a to rs to o ffe r
d yna mic te a c hing ma te ria ls, d e vo te mo re time to c la ssro o m d isc ussio n, a nd p ro vid e va lua b le
ha nd s-o n le a rning fo r stud e nts.
Aid e x ta ke s a multid isc ip lina ry a p p ro a c h to te c hnic a l e d uc a tio n so lutio ns to e nsure id e a l
le a rning e nviro nme nts tha t p ro vid e inte g ra te d ma th, sc ie nc e , te c hno lo g y, a nd ha nd s-o n
p ro b le m so lving fo r stud e nts a t a ll e d uc a tio n le ve ls. Thro ug h o ur ne two rk o f mo re tha n 20
ma nufa c turing p a rtne rs, Aid e x p ro vid e s the mo st up -to -d a te c o urse wo rk, la b o ra to ry e q uip me nt,
tra ining , a nd c usto me r se rvic e in a wid e ra ng e o f te c hnic a l e d uc a tio n p ro g ra ms fo r K-12
thro ug h p o st-se c o nd a ry e d uc a tio n.
CONTACTS Aide x Corpora tion
58 E. So uth St,
PO Bo x 388,
Ro ssville , IN 46065
To ll Fre e : 800-251-9935
Fa x: 815-230-7967
info @ a id e x.c o m
Lynn Crow,
Pre side nt
Ce ll: 765-414-3119
Office: 800-251-9935 Ext: 101Ema il: lynnc @ a id e x.c o m
La ura Coa rd ,
Indiana Sale s Re pre se ntative
Ce ll: 269-313-1613
Office: 800-251-9935 Ext: 106Ema il: lc o a rd @ a id e x.c o m
Je ff Ca rr,
Te c hnic a l Suppo rt
Office: 800-251-9935 Ext: 104Ema il: jc a rr@ a id e x.c o m
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e1
Ta
ble
of
Co
nte
ntsTABLE OF CONTENTS
Wha t is a Fa b La b? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Custom Fa b La b Environme nt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Inte ra c tive 3D Proje c tor Syste m
• AV ROVER - 3D AV ROVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3D De sig n & Pre se nta tion Tools
• SOLIDWORKS - SOLIDWORKS EDUCATION PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• NEXT WAVE AUTOMATION - VECTRIC ART TO PART DESIGN SOFTWARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
• ROLAND - ROLAND SRP PLAYER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
He a t Pre sse s
• HOTRONIX - AIR FUSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• HOTRONIX - FUSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
• HOTRONIX - AUTO OPEN CLAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
CNC Ma c hine s
• ROLAND - SRM- 20 MILLING MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• ROLAND - MDX- 40A MILLING MACHINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• ROLAND - MDX- 540/ 540A SYSTEM PRECISION PROTOTYPING MACHINE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
• FANUC - LEVIL CERTIFICATION MILL & LATHE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
• DENFORD - MICROMILL CNC MILL & MICROTURN CNC LATHE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Route rs
• NEXT WAVE AUTOMATION - CNC PIRANHA WITH ROUTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
• NEXT WAVE AUTOMATION - CNC SHARK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3D Printe rs
• AIRWOLF 3D - AXIOM DUAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• AIRWOLF 3D - AXIOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• AIRWOLF 3D - AXIOM E. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
• NEXT WAVE AUTOMATION - CNC PIRANHA WITH 3D PRINTER HEAD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
• PRINTSPACE - ALTAIR. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
La se r Eng ra ve rs/ Printe rs/ Cutte rs
• ROLAND - CAMM- 1 GS- 24 DESKTOP VINYL CUTTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• ROLAND - Ve rsa Studio 20” BN- 20 DESKTOP INKJET PRINTER/ CUTTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
• ROLAND - Ve rsa CAMM SP- 300i & SP- 540i PRINTER/ CUTTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• ROLAND - True VIS SG SERIES PRINTER/ CUTTERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
• ROLAND - Ve rsa - UV LEF- 12/ 20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• ROLAND - Ve rsa - UV LEF- 300. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
• NEXT WAVE AUTOMATION - PIRANHA FX WITH LASER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Custom La b Environme nts
• INTERIOR CONCEPTS - CUSTOM LAB ENVIRONMENTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
Wh
at
is a
Fa
b L
ab
?
2
WHAT IS A FAB LAB?
Ma ke rsp a c e s ha ve b e e n c a lle d e ve rything fro m a Fa b La b to a Te c hsho p to a ha c ke rsp a c e . Is the re a
d iffe re nc e b e twe e n the se na me s? Ye s a nd no . At the c o re , the y a re a ll p la c e s fo r ma king , c o lla b o ra ting ,
le a rning a nd sha ring . Altho ug h the se sp a c e s ha ve a lo t in c o mmo n, the y a re a lso d iffe re nt in a fe w wa ys. To
sta rt with, a Fa b La b a nd Te c hsho p a re tra d e ma rke d na me s fo r a p a rtic ula r typ e o f ma ke rsp a c e . The y a re
b o th g e ne ra lly sto c ke d with simila r typ e s o f ma ke r e q uip me nt like 3D p rinte rs, la se r c utte rs, CNC ma c hine s,
ha nd to o ls e tc . One is g o ve rne d b y a c o rp o ra tio n (Te c hsho p ) a nd the o the r a fo und a tio n (Fa b Fo und a tio n)
and each have their own specific rules and charters to follow.
Wha te ve r na me a n institutio n wa nts to g ive this typ e o f la b , whe the r it is a fo rma l Fa b La b o r Te c hsho p , o r a
la b c re a te d fo r the ind ivid ua l institutio ns wa nts a nd ne e d s the y a ll ha ve so me fund a me nta l c ha ra c te ristic s.
This typ e o f p ro je c t le a rning c re a te s a n a tmo sp he re o f inve ntive id e a s, te c hno lo g y b a se d le a rning ,
e nc o ura g e me nt, a nd fun. The ha nd s-o n na ture o f the la b itse lf a d d s to c la ssro o m le a rning . A b y-p ro d uc t
o f the se typ e s o f la b s is the a b ility fo r institutio ns to use the m a s a re so urc e fo r e ve ry a sp e c t o f the sc ho o l.
Ba nne rs, sc ho o l sig ns, a rts, c o mmunic a tio ns, p ro mo tio na l ma te ria ls, a nd muc h mo re !
These work with components and materials optimized for use in the field, and are controlled with custom so ftwa re fo r inte g ra te d d e sig n, ma nufa c turing , a nd p ro je c t ma na g e me nt.
5 STEP PROCESS TO A SUCCESSFUL, TURN-KEY LAB ENVIRONMENT
1. Pre limina ry Pla nning
• Pe rso na l Visit By Our Sa le s
So lutio ns Sp e c ia list
• De ta ile d Info rma tio n - Pric ing ,
Lite ra ture , Eq uip me nt List
• Pre se nta tio n to Ad ministra tio n,
Sc ho o l b o a rd , Te a c he rs, e tc .
2. La b De sig n
• Specific Lab Layout Assistance• Ro o m La yo ut
• Furniture La yo ut
• Eq uip me nt La yo ut
• Electrical Specifications• Network Specifications
3. Insta lla tion
• Co mp le te On-Site De live ry
• Insta lla tio n o f the La b
• Equipment Configuration• Ne two rk Te sting
• So ftwa re Te sting
• La b Orie nta tio n
• Inve nto ry o f De live re d Ite ms
4. Profe ssiona l De ve lopme nt
• Te a c he r Pro fe ssio na l De ve lo p me nt
• Ad va nc e d Pro fe ssio na l
De ve lo p me nt Se ssio ns
• Use rs’ Gro up Me e ting s
5. Afte r Sa le Support
• Wa rra nty & Out-o f-Wa rra nty Se rvic e
• Full Time Te c hnic a l Sup p o rt Sta ff
• On-Site Se rvic e
• Ship p ing Assista nc e
• Fre e 800 Numb e r Sup p o rt
• On-Line Sup p o rt
• And Muc h Mo re
Fa b La bs c a n ta ke on ma ny
va ria tions or c ombina tions of
se ve ra l foc us a re a s:
• Ma nufa c turing
• Fa b ric a tio n
• Arts & Co mmunic a tio n
• Ra p id Pro to typ ing
• Fa mily & Co nsume r Sc ie nc e
Hig hlig hts of type s of produc ts tha t c a n be inc orpora te d into
the se la bs a re :
• A p ro p e r La b Enviro nme nt
• 3D Printe rs
• 3D Sc a nne rs
• La se r Eng ra ve rs/ Cutte rs
• UV Printe rs
• Vinyl Printe r/ Cutte rs
• Sub tra c tive Pro typ ing De vic e s
• CNC Ro ute rs
• Pro fe ssio na l De sig n So ftwa re
• He a t Pre ss
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e3
Cu
sto
m F
ab
La
b E
nv
iro
nm
en
t
CUSTOM FAB LAB ENVIRONMENT
STOOL STOOL
STOOL STOOL
STO
OL
STO
OL
ROLLING
WORK TABLE
STO
OL
STO
OLA
IRW
OLF 3
D
Ax
iom
Du
al
PR
INTS
PA
CE
3D
Alt
air
RO
LA
ND
Ve
rsa
UV
LE
F-1
2
ROLAND
Ve rsa CAMM VSI Se rie s 300i
MO
NIT
OR
KE
YB
OA
RD
MO
NIT
OR
KE
YB
OA
RD
NE
XT W
AV
E
AU
TO
MA
TIO
N
CN
C P
iran
ha
with
Ro
ute
r
RO
LA
ND
MD
X-5
40
STOOL STOOL
STOOL STOOL
STO
OL
STO
OL
ROLLING
WORK TABLE
STO
OL
STO
OL
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
Inte
rac
tiv
e 3
D P
roje
cto
r S
yste
m
4
A V RO VER
3D AV ROVER
Ca pture the Minds a nd Ima g ina tions of Your Stude nts with 3D
The 3D AVRo ve r inte g ra te s the b e st in ha rd wa re , so ftwa re , a nd c o nte nt fo r a truly re ma rka b le 3D le a rning
e xp e rie nc e . Pro ve n to inc re a se te st sc o re s a nd re te ntio n b y a s muc h a s 33%, the 3D AVRo ve r is c e rta in to
insp ire stud e nts a nd e nha nc e le sso ns.
Eve rything You Ne e d for a Comple te Solution
The 3D AVRo ve r inc lud e s a 3D DLP Pro je c to r, 3D Co mp ute r with 3D Co nte nt, 3 b uilt in sp e a ke rs, mixe r
amplifier with microphone input as well as XLR out, laptop connections, 2 locking storage drawers, re tra c ta b le p o we r c o rd , he a vy d uty c a ste rs, a nd muc h mo re .
Ea sy to Use
Bring ing le sso ns to life is e a sy with the 3D AVRo ve r. Simp ly p lug yo ur syste m in, turn it o n, a nd yo u ha ve the
hig he st q ua lity 3D vid e o s, inte ra c tive o b je c ts, a nd virtua l simula tio ns fo r yo ur who le c la ss to e njo y.
Te a c h Whe re You Wa nt, the Wa y You Wa nt
• Mo st Co mp re he nsive 3D Lib ra ry
• Ad va nc e d 3D Co mp ute r Syste m
• Pro fe ssio na l so und syste m
• Ad justa b le ima g e size a nd he ig ht
AVRove r Ha s the La rg e st Re pository of 3D Educ a tiona l Conte nt. Some of Our Educ a tiona l Conte nt Inc lude s:
• Anima tions - Inc lud ing a uniq ue b le nd o f 3D vid e o s, simula tio ns, e xp e rime nts, le a rning a c tivitie s, q uizze s,
te xts, ima g e s, a nd le a rning o b je c ts, o ur 3D Anima tio ns ha ve re vo lutio nize d the wa y stud e nts a c ro ss the
wo rld und e rsta nd ke y c o nc e p ts in Ma th a nd Sc ie nc e inc lud ing Bio lo g y, Physic s a nd Che mistry.
• Inte ra c tive Obje c ts - 3D inte ra c tive o b je c ts inc lud e inc re d ib ly d e ta ile d , inte ra c tive mo d e ls sp a nning the
sub je c ts o f Bo ta ny, Huma n Ana to my, Zo o lo g y, Mic ro b io lo g y, Che mistry a nd Eng ine e ring . Stud e nts c a n
e xp lo re , d isse c t a nd ma nip ula te virtua l 3D o b je c ts.
• Virtua l Frog Disse c tion - Imme rsive le a rning a c tivitie s fe a turing ste p -b y-ste p instruc tio ns, a fully inte ra c tive
inte rfa c e , a nd e a sy to use to o ls. Stud e nts e ng a g e in a c o mp le te virtua l 3D Fro g le a rning e xp e rie nc e
inc lud ing d isse c tio n.
• To ta lly se c ure e ve n whe n in use
• Sha re a b le b e twe e n c la ssro o ms
• No se tup time
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
3D
De
sig
n &
Pre
se
nta
tio
n T
oo
ls
5
SO LIDWO RKS
SOLIDWORKS
EDUCATION
PROGRAM
The So lid Wo rks® Ed uc a tio n
Pro g ra m o ffe rs yo u a c o mp le te
suite o f 3D d e sig n to o ls use d b y
millio ns o f d e sig n p ro fe ssio na ls
a c ro ss a b ro a d ra ng e o f
ind ustrie s. With the intuitive
So lid Wo rks use r inte rfa c e
a nd d e sig n c a p a b ilitie s, yo ur
stud e nts will q uic kly b e a b le to :
• Co nc e p tua lize a nd visua lize
d e ta ile d d e sig ns
• Pre c ise ly d o c ume nt d e sig ns
a nd p a rts lists
• Run c o mp le te d e sig n a na lysis
and verification• Cre a te d yna mic te c hnic a l
illustra tio ns fo r p ro je c t
p re se nta tio ns
• Use p ro d uc t d a ta
ma na g e me nt to tra c k
student project files
With the So lid Wo rks Ed uc a tio n
Pro g ra m, yo ur stud e nts c a n
fo c us o n id e a s, p ro b le m so lving ,
a nd inno va tio n—inste a d o f
ha ving to me mo rize c o mp le x
c o mma nd s.
NEXT WA VE A UTO MA TIO N
VECTRIC ART TO
PART DESIGN
SOFTWARE
VCa rve :
VCa rve inc lud e s the
func tio na lity d e ma nd e d fo r
c o mp le x wo rk while re ma ining
inc re d ib ly e a sy to use a nd
a ffo rd a b ly p ric e d . The so ftwa re
is use d b y c a b ine t ma ke rs,
wo o d wo rke rs, sig n ma ke rs,
p ro p ma ke rs, p la stic fa b ric a to rs,
ho b b yists a nd in ma ny o the r
a p p lic a tio ns.
Aspire :
Asp ire is b uilt o n the sa me
p la tfo rm a s Ve c tric ’ s VCa rve
Pro so ftwa re , sha ring the
intuitive inte rfa c e a nd e a se
o f use fo r p ro d uc tio n d e sig n
a nd ro uting . In a d d itio n to
the p o we rful d ra wing a nd
p ro d uc tio n ro uting to o ls o f
VCa rve Pro , Asp ire a lso ha s
to o ls to le t yo u tra nsfo rm 2D
ske tc he s, p ho to s, d ra wing a nd
d ig ita l a rtwo rk into d e ta ile d
3D re lie f mo d e ls a nd the n
to c a lc ula te 3D Ro ug hing
a nd Finishing to o lp a ths to
a c c ura te ly c ut the se sha p e s.
RO LA ND
ROLAND SRP
PLAYER
Ro la nd SRP Pla ye r is id e a l
fo r a ll ra p id p ro to typ ing a nd
c usto m ra p id ma nufa c turing
a p p lic a tio ns. The CAM so ftwa re
simplifies the production p ro c e ss a nd g e ne ra te s to o l
p a ths tha t turn o ut p a rts with
smo o th surfa c e s a nd a c c ura te ,
fit-tight precision.
• Op timum to o l p a ths fo r e a c h
a p p lic a tio n fo r surfa c e o r
p o lyg o n d a ta
• Produces flawless shapes with smo o th, a c c ura te c urve s
• Exte nd s the life sp a n o f to o ls
b y re d uc ing the ir lo a d
• Cuts o nly d e sire d se c tio ns,
p ro d uc ing sha p e s with
maximum efficiency• De ta ile d p a ra me te r se tting s
e nsure p ro fe ssio na l p re c isio n
a nd q ua lity
• Ea sy-to -use , intuitive
o p e ra tio n
• Co mp a tib le with a ll Ro la nd
MDX Series milling devices
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
He
at
Pre
sse
s
6
HO TRO NIX
AIR FUSION
He a t p rinting simp lic ity thro ug h
air-powered operation. The first fully a uto ma tic he a t p re ss - the
Ho tro nix® Air Fusio n® - ma ke s it
p o ssib le . Two p ush-b utto ns a nd
a p e d a l a re a ll tha t’ s re q uire d .
Id e a l fo r me d ium to hig h-
vo lume sho p s, the Air Fusio n®
o ffe rs a two -b utto n o p e ra tio n
tha t lo c ks the up p e r p la te n
d o wn with a c c ura te , e ve n
p re ssure . It the n swing s o p e n
a uto ma tic a lly to c re a te a he a t-
fre e wo rksp a c e . A ta p o f the
fo o t p e d a l re turns the up p e r
p la te n. It’ s tha t simp le .
Ta ke the g ue sswo rk o ut o f
se tting p re ssure . Whe the r yo u’ re
printing a fleece sweatshirt or a lig htwe ig ht T-shirt, the p a te nte d
Auto Ad just Pre ssure ™
a uto ma tic a lly a d justs to the
thic kne ss o f the ite m yo u’ re
p rinting . Pro g ra m yo ur time to
c ha ng e fro m p re -he a ting to
final application. With up to four time a nd p re ssure se tting s, it’ s
no t just p o ssib le - it’ s a uto ma tic .
HO TRO NIX
FUSION
The o ne -o f-a -kind Ho tro nix®
Fusio n® o p e ra te s a s a d ra w o r
swing -style p re ss, p ro vid ing a
he a t-fre e wo rksp a c e . The swing
o r d ra w fe a ture g ive s 100%
a c c e ss to e ve ry inc h o f the 16”
x 20” lo we r p la te n, a llo wing fo r
e a sy, p re c ise p la c e me nt a nd
p o sitio ning rig ht o n the p re ss.
Whe the r yo u p re fe r to d e c o ra te
with a d ra w o r swing p re ss,
the Ho tro nix® Fusio n® ha s yo u
c o ve re d . It’ s like ha ving two
p re sse s in o ne . De p e nd ing
o n yo ur g a rme nt o r wo rk
e nviro nme nt, yo u c a n c ho o se
to swing the up p e r p la te n a wa y
o r d ra w o ut the lo we r p la te n.
Eithe r wa y, yo u’ ll a lwa ys ha ve a
he a t-fre e wo rksp a c e .
HO TRO NIX
AUTO OPEN CLAM
With a p a te nte d ma g ne tic a uto
o p e n fe a ture , o ve r-a p p lic a tio n
a nd ruine d g a rme nts a re thing s
o f the p a st. An o ve r-the -c e nte r
p re ssure a d justme nt a llo ws fo r
e ve n, e d g e -to -e d g e he a t a nd
p re ssure , a d ig ita l d isp la y ta ke s
the g ue sswo rk o ut o f p re ssure
se tting s, a nd the Twin Time r™ is
g re a t fo r p re -he a ting o r
two -ste p a p p lic a tio ns.
In a d d itio n to e nd ing o ve r-
a p p lic a tio n, the Ho tro nix®
Auto Op e n Cla m fe a ture s a
c o mp a c t c la mshe ll d e sig n,
ma king it the p e rfe c t p re ss fo r a
c ro wd e d wo rksp a c e . Re q uiring
o nly a sma ll fo o tp rint, the wid e
o p e ning still a llo ws fo r e a sy
p o sitio ning o f g a rme nts a nd
d e sig n la yo ut.
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
CN
C M
ac
hin
es
7
RO LA ND
SRM- 20
MILLING MACHINE
The SRM-20 is Ro la nd ’ s la te st
g e ne ra tio n d e skto p milling
machine for the office, studio a nd e d uc a tio na l e nviro nme nt.
Sinc e p io ne e ring d e skto p milling
in 1986, Ro la nd ha s c o ntinue d
to p e rfe c t a c c ura c y a nd
efficiency in a compact format. The SRM-20 inc o rp o ra te s
inno va tive fe a ture s, inc lud ing
a ne w sp ind le , c o lle t, c irc uit
b o a rd s a nd c o ntro l so ftwa re .
The re sult is a le a p fo rwa rd in
milling p re c isio n, sp e e d a nd
e a se o f use .
The SRM-20 c a n mill a va rie ty
o f no n-p ro p rie ta ryma te ria ls
typ ic a lly use d fo r p ro to typ ing ,
inc lud ing c he mic a l wo o d ,
a c rylic a nd mo d e ling wa x.
Op tio na l c o lle ts a re a lso
a va ila b le to e xte nd the mill’ s
c a p a b ility with a wid e ra ng e o f
e nd mill sha p e s a nd size s, id e a l
for creating beautiful finishes a nd intric a te d e ta ils.
RO LA ND
MDX- 40A
MILLING MACHINE
The Roland MDX-40A is a d e skto p Sub tra c tive Ra p id
Pro to typ ing (SRP) syste m tha t
o ffe rs p ro d uc t d e sig ne rs a
major value. The MDX-40A is le ss tha n ha lf the c o st o f
mo st a d d itive syste ms while
p ro d uc ing p ro to typ e s o ut o f a
wid e r va rie ty o f no n-p ro p rie ta ry
ma te ria ls with g re a te r p re c isio n
and better surface finish. The MDX-40A has a large 12” x 12”x 4.1” ma ximum wo rk vo lume
witho ut ro ta ry a xis, a nd a n
o p tio na l 4th ro ta ry a xis tha t
a llo ws una tte nd e d 360° milling
a nd sup p o rts ma te ria ls up to
10.6” lo ng b y 4.7” in d ia me te r.
An o p tio na l 3D sc a nning
he a d tha t use s Ro la nd ’ s
inno va tive Ac tive Pie zo Se nso r
te c hno lo g y – id e a l fo r re ve rse
e ng ine e ring – is a lso a va ila b le .
Inc lud e d p o we rful CAM a nd
simula tio n so ftwa re e na b le s
yo u to g e t sta rte d imme d ia te ly.
Bund le d with C lic kMill™, SRP
Pla ye r, Virtua l MODELA,™Dr.
Eng ra ve ,™ a nd 3D
Eng ra ve so ftwa re .
RO LA ND
MDX- 540/ 540A
SYSTEM
PRECISION
PROTOTYPING
MACHINE
The MDX-540 SRP® Syste m
c o mb ine s p re c isio n d e skto p
milling with p o we rful CAM
so ftwa re , ma king it e a sy to
p ro d uc e p ro to typ e s with
ind ustry le a d ing sp e e d a nd
accuracy. The MDX-540 mills a wid e va rie ty o f no np ro p rie ta ry
ma te ria ls a nd p o p ula r
e ng ine e re d p la stic s suc h a s
ABS, De lrin®, a nd nylo n. The
b e nc hto p d e vic e p ro d uc e s
func tio na l p ro to typ e s id e a l
fo r struc tura l, the rma l, a nd
e le c tric a l te sting . It e ve n
p ro d uc e s no n-fe rro us me ta l
rapid injection molds. MDX “S” mo d e ls d e live r ultra smo o th
surfa c e s a nd hig he r re p e a t
a c c ura c y fo r o p tic s, me ta l
mo ld s a nd o the r hig h to le ra nc e
a p p lic a tio ns.
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m8
CN
C M
ac
hin
es
FA NUC
LEVIL CERTIFICATION
MILL & LATHE
The Levil CNC certification turning cart and Levil CNC certification milling cart enables students to g a in e xp o sure to turning p ra c tic e s, inc lud ing
o n-ma c hine p ro g ra mming , se t up a nd o p e ra tio n.
The sma ll fo o tp rint with e a sy a c c e ss a llo ws
p o rta b ility, e limina ting intimid a tio n tha t muc h
larger machines can impose on students when first e nte ring CNC p ro g ra ms. The p o rta b le ma c hine
runs o n a sta nd a rd sing le p ha se 110VAC o utle t
a nd is c a p a b le o f b e ing mo ve d fro m c la ssro o m to
c la ssro o m thro ug h a sta nd a rd d o o rwa y.
Le vil Ce rtific a tion La the Fe a ture s:
• 0iT-D Ma te c o ntro l
• 8.4” LCD
• 512 K
• (G54-G59)
• 8 Sta tio n Turre t
• OD To o l sha nk Size ½” (12.7mm)
• ID To o l Sha nk Size ¾” (19.05mm)
• 7” (177mm) X axis Travel• 6.3” (160mm) Z a xis Tra ve l
• Re so lutio n 0.00004” (0.001mm)
• Re p e a ta b ility 0.0002” (0.005mm)
• Ac c ura c y 0.0004” (0.01mm)
• Rapid Feed (X & Z) 190 ipm (5000mm/min)• Cutting Feed (X & Z) 118 ipm (3000 mm/min• Sp ind le Sp e e d 3000 rp m
• Sp ind le Mo to r Po we r 2HP
• Chuc k size 4” (101.6mm)
• 475lb s a p p ro xima te we ig ht witho ut b a se
• Ba se we ig ht a p p ro xima te ly 100lb
• Air c o nsump tio n 3CFM (87L/ Min)
• Air Pre ssure re q uire me nt 90p si
• Po we r 110 VAC, 20A
• Dime nsio ns H66.5” x W33” x D30”
(1689 x 838 x 762mm)
Le vil Ce rtific a tion Mill Fe a ture s:
• 0iM-D Ma te c o ntro l
• 8.4” LCD
• 512 K
• (G54-G59) + 48 a d d itio na l wo rk o ffse ts
• 427 x 250mm (16.8” x 9.8” ) Wo rking ta b le a re a
• 11 station, fixed pot tool changer• Auto ma tic to o l le ng th se nsing (Op tio na l)
• 3” Vic e
• 16.5” (421mm) X axis Travel• 8.5” (217mm) Y a xis Tra ve l
• 7.5” (190mm) Z a xis Tra ve l
• 0.001 - 360° 4th Axis (Op tio na l)
• Dista nc e fro m ta b le surfa c e to sp ind le no se 2.75”
- 10.2” (70mm -260mm)
• Re so lutio n 0.00004” (0.001mm)
• Re p e a ta b ility 0.0002” (0.005mm)
• Ac c ura c y 0.0004” (0.01mm)
• Rapid Feed (X, Y & Z) 400 ipm (10,200 mm/min)• Cutting Feed (X, Y & Z) 240 ipm (6,120 mm/min)• Ra p id Fe e d (4th Axis) 19 rp m (7,000 d e g / min)
• To o l Ho ld e r S20T
• Sp ind le Sp e e d 100 - 17,000 rp m
• Sp ind le Mo to r Po we r 2HP
• ER-16 Co lle t size
• 450lb s a p p ro xima te we ig ht witho ut b a se
• Ba se we ig ht a p p ro xima te ly 100lb
• Air c o nsump tio n 3 CFM (87L/ Min)
• Air Pre ssure re q uire me nt 90p si
• Po we r 110 VAC, 15A
• Dime nsio ns H68” x W33” x D37”
(1727 x 838 x 939mm)
Mill La the
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
CN
C M
ac
hin
es
9
Mic roturn CNC La the Fe a ture s:
• VR CNC Turning Op e ra ting So ftwa re
• Ma inte na nc e To o ls
• 1 1/ 2” Sta nd a rd To o lp o st
• Ta ilsto c k
• 3” Dia Sp ind le Fa c e p la te
• No . 1 Mo rse Ta p e r, Sp ind le Ce ntre
• No . 0 Mo rse Ta p e r, Ta ilsto c k Ce ntre
• 2 1/ 2” Dia 3 Ja w Chuc k & To mmy Ba rs
• 1/ 4” Bra ise d Ca rb id e Tip Cutting To o l,
Rig ht Ha nd e d
Mic romill CNC Mill Fe a ture s:
• VR CNC Milling Op e ra ting So ftwa re
• Ma inte na nc e To o ls
• C la mp ing Kit
• 1/ 4” Dia Milling Co lle t
• 5/ 16” Dia Dra wb a r
• 3/ 16” Slo t Drill 1/ 4” Sha nk
• Insta lla tio n a nd Instruc tio n Ma nua ls
• Se t o f Me tric Alle n Ke ys
La theMill
DENFO RD
MICROMILL CNC MILL &
MICROTURN CNC LATHE
A c o mp a c t 3 a xis CNC milling
ma c hine a nd 2 a xis CNC la the ,
b o th with to ta lly e nc lo se d inte rlo c king
g ua rd s - the id e a l intro d uc tio n to
sma ll p a rt CNC ma nufa c ture .
Va ria b le sp ind le sp e e d s a nd
fe e d ra te s ma ke the Mic ro mill a nd
Mic ro turn id e a l fo r c utting re sista nt
ma te ria ls suc h a s wa x, p la stic , a c rylic ,
a luminum a nd fre e c utting a llo ys.
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
Ro
ute
rs
10
NEXT WA VE A UTO MA TIO N
CNC PIRANHA
WITH ROUTER
Altho ug h fe a turing an e ntry le ve l pric e , the CNC
Piranha ® is e ve ry b it as c apab le as its c o usins the
CNC Shark® and it a lso inc lude s a c o nve nie nt to uc h-
sc re e n inte rfac e ! Its c o mpac t 12’ ’ x 18’ ’ tab le make s
it pe rfe c t fo r smalle r-sc a le pro je c ts like c arving s,
p laque s, o rname nta l bo xe s and pre c isio n parts
mac hine d fro m wo o d, so ft me ta ls, o r plastic s, a ll a t
a frac tio n o f the pric e o f a full-size d CNC. With its 3D
c arving c apab ility, inc luding a 3D mo de ls lib rary, yo u
c an c arve e xpe nsive c o rbe ls, c ut intric a te inlays and
e ng raving s.
Fe a ture s:
• Ta b le d ime nsio ns: 12’ ’ x 18’
• XYZ travel: 12’’ x 13’’ x 3’’ • Ove ra ll d ime nsio ns: 19-1/ 2’ ’ W x 20-1/ 2’ ’ L x 18’ ’ H
• Aluminum inte rlo c king slo tte d ta b le tra c k fo r
hig hly c usto miza b le c la mp ing
• Inc lud e s VCa rve De skto p V8 De sig n so ftwa re
• Ve c to r Art 3D Sa mp le r Pa c k
• Co lo r To uc h Sc re e n p e nd a nt c o ntro lle r syste m
• Re q uire s a PC c o mp ute r with USB 2.0 p o rt
(no t inc lud e d )
• Re q uire s a Bo sc h, De wa lt, Po rte r Ca b le , o r
simila r style p a lm ro ute r.
• Curre ntly no t c o mp a tib le with the To uc h Pro b e
(up g ra d e c o ming so o n)
• Inc lud e s 2 Ho ld Do wn c la mp s
• Ship s fully a sse mb le d .
• Ma d e in USA
NEXT WA VE A UTO MA TIO N
CNC SHARK
With a ta b le me a suring 15-3/ 4” x 31-1/ 2”, the CNC
Sha rk® is ide a lly suite d fo r ma c hining o r c a rving o n
a la rg e va rie ty o f me diums, suc h a s sig ns, do o rs a nd
o the r sma ll pro je c ts. Its e a se o f use a nd impre ssive
po we r, spe e d , a nd a c c ura c y, se ts it a pa rt fro m
o the r c o mpe tito rs in the ma rke tp la c e . Fe a turing
ste e l, a luminum a nd hig h-de nsity po ly-e thyle ne
construction it is designed to perform flawlessly for ma ny ye a rs to c o me . The inc lude d c la mping ta b le
fe a ture s two ho ld -do wn slo ts fo r se c uring wo rk
a nywhe re a lo ng the le ng th o f the ta b le . Yo u supply
a PC c o mpute r with USB 2.0 po rt a nd a Bo sc h Co lt
ro ute r (so ld se pa ra te ly). Simply c o nne c t the USB
c a b le to the c o ntro lle r b o x a nd the o the r e nd to yo ur
c o mpute r (no t c o mpa tib le with Ma c c o mpute rs).
Fe a ture s:
• Inc lud e s VCa rve De skto p V8 De sig n so ftwa re
• Inc lud e s e xc lusive CNC Sha rk Co ntro l Pa ne l
o p e ra ting so ftwa re with Virtua l Ze ro te c hno lo g y
• Inc lud e s 3/ 8” Dia me te r V-Gro o ve Ro ute r Bit
• Inc lud e s two Ho ld -d o wn Cla mp s
• Inc lud e s mo unts fo r a Bo sc h Ro ute r
(Ro ute r Mo to r is no t inc lud e d , so ld se p a ra te ly)
• Ro ute r p o we r o n/ o ff c o ntro l syste m inc lud e d
• Fully c o mp a tib le with the Bo sc h Co lt Pa lm Ro ute r
• Do wnlo a d fre e p ro je c t p la ns fro m Ve c tric
• Hig h Sp e e d tra ve rse ra te : 200 ip m
• MDF ta b le surfa c e .
• USB inte rfa c e with o n c o ntro lle r me mo ry sto ra g e .
• Eme rg e nc y p o we r shut o ff o n Co ntro lle r.
• One ye a r wa rra nty o n p a rts a nd la b o r, sp e c ia l
ship p ing c ha rg e s a p p ly
• Ma d e in USA
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
3D
Pri
nte
rs
11
A IRWO LF 3D
AXIOM DUAL
Fe a ture s:
• Ind e p e nd e ntly Co ntro lla b le
Ho te nd s
• Cre a te So lub le Sup p o rt
Struc ture s to Elimina te Po st
Pro c e ssing
• Po we rful Qua d -Fa n Ma te ria l
Co o ling Syste m
• Inte rc ha ng e a b le No zzle s
• Co mb ine 2 Ma te ria ls o r
2 Co lo rs in One Print
• Fe a ture La rg e 12 x 8 x 9.5”
Build Vo lume
• Pro vid e d Print Se tting s Allo w
fo r Ea sy Dua l Co lo r o r Dua l
Ma te ria l Se tup
• Print in Ove r 40+ Ma te ria ls
fro m TPU to Po lyc a rb o na te
• Wi-Fi, Ethe rne t, USB a nd
Mic ro SD
• Hig h Te mp e ra ture Dua l
Printhe a d s 315 °C
• Core XV Motion System• Enc lo se d Cha mb e r
• Auto -Le ve ling
• Minimum La ye r He ig ht o f
40 Mic ro ns
A IRWO LF 3D
AXIOM
Fe a ture s:
• Auto -Le ve ling
• Enc lo se d Cha mb e r
• Core XV Motion System• Print in o ve r 40+ ma te ria ls
fro m TPU to Po lyc a rb o na te
• Astro p rint C lo ud Slic ing a nd
Mo b ile Print Ma na g e me nt
• Minimum La ye r He ig ht o f
40 Mic ro ns
• Build Vo lume o f 1000
Cub ic Inc he s
• Po we rful Tri-Fa n Ma te ria l
Co o ling Syste m
• Inte rc ha ng e a b le No zzle s
(fro m 0.35 to 0.50 mm)
• Wi-Fi, Ethe rne t, USB a nd
Mic ro SD
• Hig h Te mp e ra ture Printhe a d
315 °C
• Dua l Ho te nd (Ea rly 2016)
A IRWO LF 3D
AXIOM E
Fe a ture s:
• Print in o ve r 10+ ma te ria ls
fro m TPU to PLA
• Astro p rint C lo ud Slic ing a nd
Mo b ile Print Ma na g e me nt
• Auto -Le ve ling
• Enc lo se d Cha mb e r
• Core XY Motion System • Minimum La ye r He ig ht o f
40 Mic ro ns
• Build Vo lume o f 1000 Cub ic
Inc he s
• Po we rful Tri-Fa n Ma te ria l
Co o ling Syste m
• Inte rc ha ng e a b le No zzle s
(fro m 0.35 to 0.50 mm)
• USB a nd Mic ro SD
• Wi-Fi, Ethe rne t (o p tio na l)
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
3D
Pri
nte
rs
12
NEXT WA VE A UTO MA TIO N
CNC PIRANHA WITH
3D PRINTER HEAD
Altho ug h fe a turing a n e ntry le ve l p ric e , the CNC
Pira nha ® is e ve ry b it a s c a p a b le a s its c o usins the
CNC Sha rk® a nd it a lso inc lud e s a c o nve nie nt
to uc h-sc re e n inte rfa c e ! Its c o mp a c t 12’ ’ x 18’ ’
ta b le ma ke s it p e rfe c t fo r sma lle r-sc a le p ro je c ts like
c a rving s, p la q ue s, o rna me nta l b o xe s a nd p re c isio n
p a rts ma c hine d fro m wo o d , so ft me ta ls, o r p la stic s,
a ll a t a fra c tio n o f the p ric e o f a full-size d CNC.
With its 3D c a rving c a p a b ility, inc lud ing a 3D
mo d e ls lib ra ry, yo u c a n c a rve e xp e nsive c o rb e ls,
c ut intric a te inla ys a nd e ng ra ving s.
The CNC Pira nha ® ha s suc h inc re d ib le a c c ura c y
tha t yo u c a n e ve n e ng ra ve c usto m c irc uit b o a rd s
with it. The c re a tive p o te ntia l is unlimite d a nd the
entire machine can easily fit on one end of your b e nc h. Just d e sig n yo ur wo rk with the inc lud e d
VCa rve De skto p V8 De sig n so ftwa re o n a PC
c o mp ute r with USB 2.0 p o rt (no t inc lude d). The n
simply save the program directly to a USB flash drive, plug it into the Pendant, select your file, a nd hit the run b utto n. No ne e d to ha ve yo ur
c o mp ute r sub je c te d to a d usty sho p e nviro nme nt.
PRINTSPA C E
ALTAIR
Alta ir wa s de sig ne d with pro fe ssio na ls in mind , g iving
yo u the a b ility to te st ide a s, c re a te pro to type s, a nd
ho ld a 3D mo de l in yo ur ha nd a s q uic kly a s po ssib le .
So lid c ra ftsma nship a nd pre c isio n ma c hine d pa rts
ma ke Alta ir supe rio r in q ua lity. Ge t printing q uic kly
with sta te -o f-the -a rt fe a ture s:
La b- Frie ndly - Alta ir is a q uie t p rinte r a nd wo n’ t b e
a d istra c tio n - whe n running . With a sma ll fo o tp rint
b ut la rg e b uild a re a , a use r c a n p rint p a rts o ve r 8
inc he s in d ia me te r a nd 10 inc he s hig h.
Ac c ura te - With a c lic k o f a b utto n Alta ir c a n
c a lib ra te the p rint b e d in le ss tha n thre e minute s
so it is e a sy to g e t a c c ura te p rints a nd o p tima l first
la ye r a d he sio n.
Ve rsa tile - Our NOVA a ll-me ta l ho t e nd c a n p rint a t
hig h sp e e d s witho ut ja mming . Hig h te mp p rinting
me a ns Alta ir c a n p rint in o ve r 25 d iffe re nt ma te ria ls.
Effic ie nt - Ge t p rinting fa ste r. Our Insta nt-On p rint
b e d he a ts up in le ss tha n o ne minute a nd o ur q uic k
re le a se ho t e nd a nd he a te d b e d ma ke c le a n-up
e ffic ie nt.
Re lia ble - Co nstruc te d o f sturd y a luminum
a nd c a rb o n fib e r, the Alta ir is b uild to la st. Only
p re c isio n ma c hine d a nd hig h q ua lity p a rts use d in
the b uild .
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
La
se
r E
ng
rav
ers
/P
rin
ters
/C
utt
ers
13
RO LA ND
CAMM- 1 GS- 24 DESKTOP
VINYL CUTTER
The Ro la nd CAMM-1 GS-24 d e skto p vinyl c utte r is
precision and efficiency - to the max. Equipped with a c o mp le te ly re d e sig ne d c utting a nd b la d e
ho ld e r, the GS-24 o ffe rs g re a te r sta b ility a nd a 39.5
p e rc e nt inc re a se in d o wn fo rc e (fro m 250g to 350g ).
Tra nsla tio n: yo u c a n c ut like ne ve r b e fo re - e ve n o n
think, d e nse sub stra te s. Ve hic le g ra p hic s, sig ns a nd
d e c a ls, d e c o ra te d a p p a re l, sp e c ia lty g ra p hic s, a nd
mo re . Ba c ke d b y the 3-ye a r wa rra nty, the GS-24 is
Ro la nd ’ s b e st d e skto p vinyl c utte r e ve r.
Fe a ture s:
• Inno va tive , d ig ita l se rvo mo to r o ffe rs e xc e p tio na l
p re c isio n
• Unriva le d c o mp a tib ility—a c c e p ts me d ia wid th
fro m 2” to 27.5” (50 to 700mm)
• Ma ximum c utting a re a o f 22.9” (W) x 984” (L)
• Fle xe s its musc le s with 350g o f d o wn fo rc e
• De live rs a ma ximum c utting sp e e d o f 20 inc he s
p e r se c o nd
• Ove rla p Cutting (up to 10x) ma ke s c utting a nd
we e d ing e a sie r tha n e ve r
• Cut thro ug h e ve n thic k sub stra te s—like ma g ne tic
ma te ria ls—with inc re d ib le e a se
• Unriva le d c o mp a tib ility—a c c e p ts me d ia wid th
fro m 2” to 27.5” (50 to 700mm)
• Ma ximum c utting a re a o f 22.9” (W) x 984” (L)
• Fle xe s its musc le s with 350g o f d o wn fo rc e
• De live rs a ma ximum c utting sp e e d o f 20 inc he s
p e r se c o nd
• Ove rla p Cutting (up to 10x) ma ke s c utting a nd
we e d ing e a sie r tha n e ve r
• Cut thro ug h e ve n thic k sub stra te s—like ma g ne tic
ma te ria ls—with inc re d ib le e a se
RO LA ND
Ve rsa Studio 20” BN- 20
DESKTOP INKJET PRINTER/
CUTTER
With the Ve rsa Stud io BN-20, we ’ ve ta ke n
e ve rything tha t ma ke s a Ro la nd p rinte r g re a t a nd
packed it into one powerful, profit-producing p a c ka g e . Truly a ffo rd a b le . Re ma rka b ly ve rsa tile .
Awa rd -winning mild so lve nt inks. Yo ur c ho ic e o f
me d ia . Me ta llic a nd white ink o p tio ns. One d e vic e
tha t c a n p rint a nd c ut a n inc re d ib le va rie ty o f
jo b s o n a full sp e c trum o f me d ia . Eve rything fro m
stic ke rs, d e c a ls, la b e ls, t-shirt tra nsfe rs, p ho to p rints,
p o ste rs a nd sma ll fo rma t sig na g e to e ye -p o p p ing
a wa rd s a nd ve hic le g ra p hic s. All fro m yo ur
d e skto p .
Fe a ture s:
• Sup e rio r Ima g e Qua lity Thro ug h Sta te -o f-the -Art
Print Te c hno lo g y
• Fo ur Diffe re nt Ink Cho ic e s Inc lud ing Me ta llic Silve r
o r White Ink
• Print and Cut in One Integrated Workflow• Ve rsa Wo rks® Pro fe ssio na l RIP So ftwa re
• Ro la nd OnSup p o rt Online Pro d uc tio n Assista nc e
• One -Ye a r Tro ub le -Fre e Wa rra nty
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
La
se
r E
ng
rav
ers
/P
rin
ters
/C
utt
ers
14
RO LA ND
True VIS SG SERIES
PRINTER/ CUTTERS
Whe the r yo u’ re just sta rting o ut o r wa nting to
e xp a nd p ro d uc tio n, ne w True VIS SG se rie s p rinte r/
c utte rs o ffe r a ll the q ua lity a nd ve rsa tility o f a
Ro la nd , a t a n unb e a ta b le p ric e . True VIS ushe rs in a
ne w e ra o f inte g ra te d p rinting a nd c o nto ur c utting ,
a nd the SG d e live rs the va lue yo u ne e d to q uic kly
a nd e a sily b uild yo ur ind ustry.
Fe a ture s:
• Printe r p lus inte g ra te d c o nto ur c utte r a va ila b le
in two mo d e l size s:> 54-inc h (105.7(W) x 29.3(D) x
51.6(H))> 30-inc h (81.5(W) x 29.3(D) x 51.6(H))
• Ro la nd Ve rsa Wo rks Dua l RIP So ftwa re inc lud e d –
utilize s b o th PDF a nd Po stSc rip t e ng ine s fo r sup e r-
fast preview times and improved handling of files with tra nsp a re nc ie s
• Ro la nd DG Mo b ile Pa ne l – ma na g e the
func tio ns o f the SG p rinte r/ c utte r re mo te ly
using a sma rtp ho ne o r ta b le t with a Blue to o th
c o nne c tio n
• Ne w ink syste m o ffe rs lo w-c o nsump tio n, lo w-c o st
p ro d uc tio n with re mo va b le 500ml p o uc he s
• True VIS INK a va ila b le in CMYK
• Two new FlexFireTM printheads fire dot patterns more efficiency in 3 sizes, for high quality images a nd c o lo r witho ut hig h ink use
• True VIS Co lo r a c hie ve d with ne w Fle xFire
p rinthe a d s a nd True VIS INK d e live rs a wid e
g a mut o f stunning , e ye -p o p p ing c o lo r
• Ne w c utting c a rria g e , b la d e ho ld e r, a nd
b la d e fo r inc re a se d d o wn fo rc e a nd me d ia
c o mp a tib ility
RO LA ND
Ve rsa CAMM VSi PRINTERS/
CUTTERS
The VSi Se rie s o ffe rs e ve rything use rs a lre a d y e njo y
a b o ut the Ve rsa CAMM inkje c ts...a nd mo re . We
sta rte d o ff with a ll the p o p ula r fe a ture s tha t ha ve
ma d e Ve rsa CAMM the wo rld ’ s b e st-se lling wid e -
fo rma t p rinte r. The n we e xp a nd e d the func tio na lity
a nd c a p a b ilitie s e ve n furthe r, inc o rp o ra ting
the la te st p rint he a d te c hno lo g y, fa ste r d rying
GREENGUARD Gold certified eco-Sol MAX® 2 inks
in CMYKc Lm, White , Me ta llic a nd ne w Lig ht Bla c k,
a nd PANTONE® c o lo r ma tc hing . We e ve n a d d e d
fro nt-lo a d ing c a rtrid g e s a nd o the r use r-frie nd ly
d e sig n fre a ture s fo r unsurp a sse d c o nve nie nc e a nd
efficiency.
Ava ila b le in 30, 54 o r 64-inc h mo d e ls, the
Ve rsa CAMM VSi se rie s o f wid e fo rma t inkje t p rinte rs
a c hie ve stunning re sults a c ro ss a wid e a rra y o f
a p p lic a tio ns, inc lud ing la b e ls a nd d e c a ls, sig ns,
banners, vehicle graphics and wraps, fine art p o ste rs, p a c ka g ing p ro to typ e s, POP d isp la ys a nd
he a t tra nsfe rs fo r a p p a re l d e c o ra tio n.
• Offered in Five Ink Configurations: - CMYKKYMC
- CMYKLc LmLk
- CMYKLc LmLk+WH
- CMYKLc LmLk+MT
- CMYKLc Lm+WH+MT
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
La
se
r E
ng
rav
ers
/P
rin
ters
/C
utt
ers
15
RO LA ND
Ve rsa - UV LEF- 12/ 20
Introducing the amazing LEF benchtop UV flatbed p rinte rs. Print d ire c tly o n d ime nsio na l o b je c ts suc h
a s a wa rd s, g iftwa re , p a c ka g ing a nd p ro d uc ts
with sp e c ta c ula r re sults. With the LEF, yo u g e t a ll
the benefits of Roland’s award-winning UV-LED te c hno lo g y, whic h c ure s inks insta ntly o n just a b o ut
any surface. Instant drying and flexible ECO-UV inks d e live r hig h c o lo r d e nsity a nd a wid e g a mut fo r
e xc e p tio na l ima g e s p rint a fte r p rint. Sp e c ia lty inks,
inc lud ing white a nd c le a r, a llo w p rinting o n c le a r,
reflective and colored surfaces and finish graphics with d a zzling e mb o ssing a nd va rnishing e ffe c ts.
Choose from Two Mode ls:
The LEF-12 a c c o mmo d a te s o b je c ts up to 12 inc he s
b y 11 inc he s a nd 3.94-inc he s thic k. The LEF-20
p rints o n ite ms up to 20 inc he s b y 13 inc he s a nd
3.94 inc he s thic k, a nd inc lud e s a ho st o f a d va nc e d
fe a ture s.
LEF- 20 Adva nc e d Fe a ture s:
• Dista nc e p rint mo d e fo r o utsta nd ing q ua lity o n
c urve d o b je c ts
• Sta inle ss ste e l he ig ht se nso r a llo ws p rinting o n
ma g ne tic p ro d uc ts
• Ne w, a d va nc e d UV-LED c uring syste m to
e xp e d ite p ro d uc tio n
- 2x fa ste r C le a r ink a nd CMYK ink p rinting
RO LA ND
Ve rsa - UV LEF- 300
With the Ve rsa Stud io BN-20, we ’ ve ta ke n
e ve rything tha t ma ke s a Ro la nd p rinte r g re a t a nd
packed it into one powerful, profit-producing p a c ka g e . Truly a ffo rd a b le . Re ma rka b ly ve rsa tile .
Awa rd -winning mild so lve nt inks. Yo ur c ho ic e o f
me d ia . Me ta llic a nd white ink o p tio ns. One d e vic e
tha t c a n p rint a nd c ut a n inc re d ib le va rie ty o f
jo b s o n a full sp e c trum o f me d ia . Eve rything fro m
stic ke rs, d e c a ls, la b e ls, t-shirt tra nsfe rs, p ho to p rints,
p o ste rs a nd sma ll fo rma t sig na g e to e ye -p o p p ing
a wa rd s a nd ve hic le g ra p hic s. All fro m yo ur
d e skto p .
Fe a ture s:
• Sup e rio r Ima g e Qua lity Thro ug h Sta te -o f-the -Art
Print Te c hno lo g y
• Fo ur Diffe re nt Ink Cho ic e s Inc lud ing Me ta llic Silve r
o r White Ink
• Print and Cut in One Integrated Workflow• Ve rsa Wo rks® Pro fe ssio na l RIP So ftwa re
• Ro la nd OnSup p o rt Online Pro d uc tio n Assista nc e
• One -Ye a r Tro ub le -Fre e Wa rra nty
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
La
se
r E
ng
rav
ers
/P
rin
ters
/C
utt
ers
16
NEXT WA VE A UTO MA TIO N
PIRANHA FX WITH LASER
Piranha Fx is the first ever make anything machine. With its quick easy to change modules it can carve, laser e ng rave o r e ve n 3D print! Fe aturing a c o mpac t 12’ ’ x 13’ ’ c utting c apac ity, the CNC Piranha Fx® is pe rfe c t fo r
smalle r-sc a le pro je c ts like c arving s, p laque s, o rname nta l bo xe s and pre c isio n parts mac hine d fro m wo o d, so ft
me ta ls, o r plastic s. The Lase r e ng rave r a ttac hme nt quic kly a llo ws yo u the ab ility to e ithe r e nhanc e yo ur CNC
handy wo rk o r c re a te fro m sc ra tc h. Yo u c an a lso do pro je c ts like le tte ring , e ng rave pho to s, o r imag e s. Fina lly with
its quic k c hang e 3D printing mo dule yo u c an take yo ur pro je c t fro m de sig n to pro to type in no time . Yo ur c re a tive
po te ntia l is unlimite d with the Piranha Fx® and the entire machine can easily fit on one end of your workbench.
Fe a ture s:
• Ta b le d ime nsio ns: 12’ ’ x 18’
• XYZ travel: 12’’ x 13’’ x 3’’ • Ove ra ll d ime nsio ns: 19-1/ 2’ ’ W x 20-1/ 2’ ’ L x 18’ ’ H
• Aluminum inte rlo c king slo tte d ta b le tra c k fo r hig hly c usto miza b le c la mp ing
• Inc lud e s VCa rve De skto p V8 De sig n so ftwa re
• Ve c to r Art 3D Sa mp le r Pa c k
• Co lo r To uc h Sc re e n p e nd a nt c o ntro lle r syste m
• Re q uire s a PC c o mp ute r with USB 2.0 p o rt
(no t inc lud e d )
• Re q uire s a Bo sc h, De wa lt, Po rte r Ca b le , o r simila r style p a lm ro ute r. (so ld se p a ra te ly)
• Curre ntly no t c o mp a tib le with the To uc h Pro b e (up g ra d e c o ming so o n)
• Inc lud e s 2 Ho ld Do wn c la mp s
• Ship s fully a sse mb le d .
• Ma d e in USA
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
Cu
sto
m L
ab
En
vir
on
me
nts
17
Me d ia Ta b le
Co lla b o ra tio n Ta b leMe d ia Ce nte r
Pinwhe e l Ta b le
STEM La b
Instruc to r De sk
INTERIO R C O NC EPTS
CUSTOM LAB ENVIRONMENTS
Inte rio r Co nc e p ts ma nufa c ture s the b e st sp a c e sa ving furniture o n the
market thanks to our one-inch thick panel system that can be modified b y the inc h. Our inno va tive mo d ula r p a ne l syste m ta ke s up le ss ro o m
a nd a llo ws yo u to d o mo re with le ss. We b uild o ur furniture a ro und the
e xisting a rc hite c ture , like c o lumns a nd utility a c c e ss p a ne ls, to p ro vid e
the b e st utiliza tio n o f yo ur sp a c e . Inte rio r Co nc e p ts ha s the a b ility to
comfortably fit more people into your space or create more usable sp a c e in a ny g ive n a re a .
Sta nd a rd p ro d uc ts a re fa st b e c o ming a c o mmo d ity with p ric e b e ing
the o nly d iffe re ntia tio n. With the a b ility to ma ximize sp a c e a nd mo d -
ify o ur furniture , a ll in a time ly a nd e c o no mic a l fa shio n, we p ro vid e a
p ro d uc t tha t will wo rk b e tte r a nd b e c o mp e titive fo r ye a rs to c o me .
Our c usto me rs kno w tha t the y d o no t ha ve to se ttle o n sta nd a rd , whe n
the y ha ve the a b ility to g e t e xa c tly wha t the y ne e d to e nha nc e the ir
b usine ss. Wa tc h o ur c usto me rs te ll the ir sto ry in the Te stimo nia ls se c tio n.
As Inte rio r Co nc e p ts wo rks with sc ho o ls to d e sig n Fa b La b s a c ro ss
the c o untry, we ’ ve no tic e d se ve ra l p ro d uc t tre nd s tha t ha ve he lp e d
schools to create a flexible and fun workspace:
• Uniq ue ta b le sha p e s with white b o a rd s to inc re a se c o lla b o ra tio n
• Mo b ile wo rk a re a s with sto ra g e fo r p ro je c ts a nd le a rning to o ls
• Adjustable height mobile podium for the teacher provides a flexible wo rk a re a
• Co mfo rta b le sto o ls a nd c ha irs
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
No
tes
18
NOTES
www.a id e x.c o m Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e
No
tes
19
NOTES
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To m o rro w’s Wo rkfo rc e www.a id e x.c o m
No
tes
20
NOTES
AIDEX CORPORATION CAPABILITIES Fo r ne w c o nstruc tio n a nd re no va tio n p ro je c ts, Aid e x Co rp o ra tio n c o mb ine s a c le a r
visio n o f yo ur g o a ls with o ur p ro fe ssio na l c o nsulting , p la nning , imp le me nta tio n a nd
sup p o rt se rvic e s, to ma ximize yo ur e d uc a tio na l re sults:
Consulting
Be fo re the sp a c e p la nning b e g ins, o ur sta ff will me e t with yo u to und e rsta nd yo ur
educational objectives, and help to define a successful and sustainable program imp le me nta tio n.
Pla nning
Ne xt, we will a ssist in the c a re ful p la nning o f a to ta l le a rning e nviro nme nt – no t just a
“lab.” We’ll work with your administrators, faculty, and architects to help layout your sp a c e , a nd p ro vid e yo u with d e ta ile d p la ns.
Imple me nta tion
Whe n yo ur b uild ing is re a d y, o ur fa c to ry-tra ine d te c hnic ia ns will c o mp le te yo ur furniture
a nd e q uip me nt insta lla tio n o n time , a nd within b ud g e t. And o ur ma nufa c turing
p a rtne rs will p ro vid e e ffe c tive p ro fe ssio na l d e ve lo p me nt fo r yo ur fa c ulty a nd la b
sup p o rt sta ff, e ithe r o n-site o r a t o ur tra ining fa c ilitie s.
Support
Onc e yo ur p ro g ra m is up -a nd -running , o ur te a m o f o utsid e se rvic e te c hnic ia ns a nd
insid e sup p o rt sta ff will wo rk with yo u to e nsure tha t yo ur p ro g ra m c o ntinue s to func tio n
as specified, and is kept up-to-date, for many years to come.
Pro vid ing Ed uc a tio na l Te c hno lo g ie s fo r To mo rro w ’ s Wo rkfo rc e
www.a id e x.c o m
58 Ea st So uth Stre e t,
PO Bo x 388,
Ro ssville , IN 46065
To ll Fre e : 800-251-9935
Fa x: 815-230-7967
info @ a id e x.c o m
www.a id e x.c o m
Recommended