View
223
Download
0
Category
Preview:
Citation preview
8/14/2019 2 Fundamental Solid-State Principles
1/32
Fundamental Solid-State PrinciplesSemiconductors
8/14/2019 2 Fundamental Solid-State Principles
2/32
A semiconductor is a material that is neither agood conductor nor a good insulator, butrather, lies in between the two. In their purestform, semiconductors have few applications
in electronics.However, when the characteristics of a pure
semiconductor are altered through a processknown as doping, many useful electronic
devices can be developed.
Introduction
8/14/2019 2 Fundamental Solid-State Principles
3/32
1. atomic theory
2. doping
3. pn junction
4. bias
Outline
8/14/2019 2 Fundamental Solid-State Principles
4/32
Atom
Bohr model
1. Atomic theory
8/14/2019 2 Fundamental Solid-State Principles
5/32
Valence shelloutermost shell
Determines the conductivity of the atom
Can contain up to 8 e-
Atomic Theory
8/14/2019 2 Fundamental Solid-State Principles
6/32
1 valence e- perfect conductor
8 valence e- insulator
4 valence e- semiconductor
Conductivity decreases with an increase in thenumber of valence electrons.
Atomic theory
8/14/2019 2 Fundamental Solid-State Principles
7/32
Silicon (Si) - 14Germanium (Ge) - 32
Carbon (C) 6
Carbon is used primarily in the production ofresistors and potentiometers.
Silicon is commonly used than germanium
because it is more tolerant of heat.
Semiconductors
8/14/2019 2 Fundamental Solid-State Principles
8/32
The net charge of an atom is zero. Positive net charge Negative net charge
Fundamental laws Electrons travel in orbital shells
Each orbital shell relates to a specific energy range(Which orbital electrons have higher energy levels?) For an electron to jump from its shell to one having a
higher energy level, it must absorb enough energy tomake up the difference between the energy levels ofthe two shells.
If an electron absorbs enough energy to jump from one
shell to another, it will eventually give up the energyit absorbed and return to a lower-energy shell.
Charge and conduction
8/14/2019 2 Fundamental Solid-State Principles
9/32
Energy gap difference between energy levels of any two orbitalshells
For conductors, semiconductors, and insulators, the valence toconduction-band energy gaps are approximately 0.4, 1.1, and 1.8eV.
The higher the energy gap, the harder it is to cause conduction.(Why?)
Excited state
Energy gaps
8/14/2019 2 Fundamental Solid-State Principles
10/32
Covalent bonding a means of holding atoms together bysharing valence electrons.The atoms are held together, forming a solid substance.The atoms are electrically stable, because their valence shells
are complete.The completed valence shells cause the silicon to act as an
insulator. Thus, intrinsic (pure) silicon or germanium is avery poor conductor.
Covalent bonding
8/14/2019 2 Fundamental Solid-State Principles
11/32
At room temperature, a silicon crystal hasfewer free electrons than a germanium.Hence, silicon is a better insulator ( desirablecharacteristic).
How about carbon?
Why is silicon more often used thangermanium?
8/14/2019 2 Fundamental Solid-State Principles
12/32
Hole a gap in the covalent bond
Electron-hole pair a free electron and itsmatching valence band hole
Recombination when a free electron returnsto the valence shell
Lifetime the time from electron-hole pairgeneration to recombination
Conduction
8/14/2019 2 Fundamental Solid-State Principles
13/32
At room temperature, thermal energy(heat)causes the constant creation of electron-holepairs, with their subsequent recombination.
A semiconductor always has some number offree electrons even when no voltage isapplied to the element.
temperature, free electrons-273 degree Celsius absolute zero!!!Conductivity in a semiconductor varies
directly with temperature.
Conduction versus Temperature
8/14/2019 2 Fundamental Solid-State Principles
14/32
1.What are the 3 particles that make up the atom?2.What is the relationship between the number of
valence electrons and the conductivity of agiven element?
3.How many valence e- are there in a conductor? Aninsulator? A semiconductor?
4.What 3 semiconductor elements are mostcommonly used in electronics?
5.What are the relationships between electrons and
orbital shells ?6.What is an energy gap? What are the energy gap
values for insulators, semiconductors, andconductors?
7.What forms of energy are given off by an electronthat is falling into the valence band from the
SECTION REVIEW
8/14/2019 2 Fundamental Solid-State Principles
15/32
8. What is covalent bonding?9. What are the effects of covalent bonding on
intrinsic semiconductor materials?10. What is an electron-hole pair?11. What is recombination?12. How long is the typical lifetime of an
electron-hole pair?13. What is the relationship between
temperature and conductivity?14. Why arent electron-hole pairs generated in
a semiconductor when its temperature dropsto absolute zero?
SECTION REVIEW
8/14/2019 2 Fundamental Solid-State Principles
16/32
Doping process of adding impurity atoms tointrinsic silicon or germanium to improve theconductivity of the semiconductor.
Extrinsic impure
Two element types used for dopingTrivalent (acceptor atoms)Pentavalent (donor atoms)
P-type material
N-type material
2. Doping
8/14/2019 2 Fundamental Solid-State Principles
17/32
Trivalent impurities Pentavalent impurities
Aluminum (Al) Phosphorus (P)
Gallium (Ga) Arsenic (As)
Boron (B) Antimony (Sb)Indium (In) Bismuth (Bi)
Doping elements
8/14/2019 2 Fundamental Solid-State Principles
18/32
Pentavalent + intrinsic = n-type
N-type materials are still electrically neutral!
Majority carriers: conduction band/free electrons
Minority carriers: valence band holes
N-type vs P-type materials
oTrivalent + intrinsic = p-typeoMajority carriers : hole
oMinority carriers: free electrons
oP-type materials are still electrically neutral!
N-type materials
P-type materials
8/14/2019 2 Fundamental Solid-State Principles
19/32
1.What is doping? Why is it necessary?2.What is an impurity element?
3.What are trivalent and pentavalent elements?
4.Despite their respective characteristics, n-typeand p-type materials are still electricallyneutral. Why?
5.In what ways are n-type and p-type materials
similar? In what ways are they different?
Section review
8/14/2019 2 Fundamental Solid-State Principles
20/32
n-type + p-type = useful pn junction
Diffusion results:One net + charge in the n-type material
One net charge in the p-type material
1-3 The PN Junction
8/14/2019 2 Fundamental Solid-State Principles
21/32
At a large-scale picture:Each electron that diffuses across thejunction leaves one positively chargedbond in the n-type material and producesone negatively charged bond in the p-typematerial.
Both conduction-band electrons (freeelectrons) and valence-band holes areneeded for conduction through thematerials.When an electron diffuses across a
junction, the n-type material lost aconduction-band electron. When theelectrons fall into a hole in the p-typematerial, the material has lost avalence band- hole.
Both bonds have been depleted ofcharge carriers.
Depletion layer
8/14/2019 2 Fundamental Solid-State Principles
22/32
1.What is the overall charge on an n-typecovalent bond that has just given up aconduction-band electron?
2.What is the overall charge on an p-type
covalent bond that has just accepted anextra valence-band electron?
3.Describe the forming of the depletion layer.
4.What is barrier potential? What causes it?
Section review
8/14/2019 2 Fundamental Solid-State Principles
23/32
A PN junction is useful because we can controlthe width of the depletion layer.
By controlling the depletion layer width, we
control the resistance, thus we can control theamount of current that can pass through adevice.dep. layer width, resistance, junction current dep. layer width, resistance, junction current
Bias potential applied to a pn junction toobtain a desirable mode of operation.
1-4 Bias
8/14/2019 2 Fundamental Solid-State Principles
24/32
Two types:Forward biasReverse bias
Forward bias potential used to reduce the
resistance of the pn junctionReverse bias potential used to increase the
resistance of the pn junction
Bias
8/14/2019 2 Fundamental Solid-State Principles
25/32
When the applied voltage causes the n-type material tobe more negative than the p-type material.
Allows current to pass
Majority carriers in the n-type and p-type materials are
pushed toward the junction.Minority carriers in the n-type and p-type materials are
drawn away from the junction.
Forward Bias
8/14/2019 2 Fundamental Solid-State Principles
26/32
Bulk resistancecombined resistance of the n-type and p-type
materials in a FB pn junctionTypically in the range of 5 ohms or less
Forward voltage (VF
)
Voltage across a FB pn junction0.7 v for silicon0.3 v for germanium
Two ways of forward biasing a pn junction:
By applying a potential to the n-material thatdrives it more negative than the p-material
By applying a potential to the p-material thatdrives it more positive than the n-material
Forward bias
8/14/2019 2 Fundamental Solid-State Principles
27/32
When the applied potential causes the n-type material to bemore positive than the p-type material.Depletion layer becomes wider, junction current reduced to
near zeroMajority carriers in the n-type and p-type materials are
drawn away from the junction
Minority carriers in the n-type and p-type materials arepushed toward the junctionDiffusion current
Majority carrier current during the time the depletionlayer is growing
Reverse bias
8/14/2019 2 Fundamental Solid-State Principles
28/32
Two ways to reverse bias a junction:By applying a potential to the n-type material
that drives it morepositive than the p-typematerial
By applying a potential to the p-type materialthat drives it more negative than the n-typematerial
Reverse bias
8/14/2019 2 Fundamental Solid-State Principles
29/32
Bias type Junctionpolarities
Junctionresistance
Forward N-type is more(-) than p-type
Extremely low
reverse P-type is more
(-) than n-type
Extremely high
Bottom line
8/14/2019 2 Fundamental Solid-State Principles
30/32
Silicon is more tolerant of heat and moreabundant than germanium. It is also a betterinsulator than germanium (at roomtemperature)
Germanium oxide is water soluble, makinggermanium more difficult to process thansilicon.
When heated, silicon readily produces silicondioxide, which is critical to the production ofintegrated circuits. Germanium lacks anycomparable property.
Final Note
8/14/2019 2 Fundamental Solid-State Principles
31/32
1.What are the resistance and currentcharacteristics of a pn junction when itsdepletion layer is at its maximum width? Itsminimum width?
2.What purpose is served by the use of bias?3.What effect does forward bias have on
depletion layer width of a pn junction?
4.What is the junction resistance of a FB pnjunction?
5.What are the approximate values of VF for FB Si
and Ge pn junctions?
Section review
8/14/2019 2 Fundamental Solid-State Principles
32/32
6.List the commonly used methods for forwardbiasing a pn junction?
7.What effect does reverse bias have on thedepletion layer width of a pn junction?
8.What is the junction resistance of a reverse-biased pn junction?
9.List the commonly used methods for reverserbiasing a pn junction.
10.Why is silicon more commonly used than thegermanium in the production of solid-statecomponents?
11.
12
Section review
Recommended