14cbewear

H45 - H100 Models

Consumable items

Bushings

Schedule maintenance

Membranes

Wear Components

Measure Depth of Worn Area Dimension “A”See Service Manuals for specifications.Replace Bushing if ID out of spec.

Wear Limits - Lower Tool Bushing

Worn Out

“A”

Wear Limits - Upper Tool Bushing

Measure inside diameter of top end of Upper Tool Bushing. Replace if more than specifications allow.See service manuals for specifications.

H45 Example:New bushing diameter 45mmReplace if diameter is more than 47mm.

Wear Limits -Tool

Upper Tool Bushing Area

Lower Tool Bushing Area

Measure Diameter of Tool at Upper and Lower Bushing Areas -- Replace Tool if not to specification.

See service manual for specifications.

H45 Example:New tool diameter 45 mmReplace tool if less than 43mm.

Documents