View
0
Download
0
Category
Preview:
Citation preview
LeistungszentrumSimulationS- und
Software-baSierte innovation
12th european CongreSS for Stereology and image analySiS 2017
Monday, September 11th to Thursday, September 14th 2017
Fraunhofer-Zentrum, Kaiserslautern
Supported by
International Society for Stereology and Image Analysis
www.issia.net
PreFace
Dear participants of the European Congress on Stereology and Image Analysis,
Let me welcome you in Kaiserslautern on behalf of the International Society for Stereology
and Image Analysis (ISSIA). ECSIA is already the 12th European Congress organized under the
auspieces of the Stereology Society. It alternates with International Congress every two years.
I am sure that this congress will bring you much new information, inspiration and contacts.
First of all I would like to invite you to the talk of Annick De Backer, the winner of the PhD
Competition in Stereology and Image Analysis, held during the Social Dinner on Wednesday,
13th September. Annick worked on her PhD thesis “Quantitative atomic resolution electron mi-
croscopy using advanced statistical techniques” under the supervision of Prof. Sandra Van Aert
at University of Antwerp. Please, do not miss this opportunity – it is the first time this prize is
awarded. I would like to thank all applicants as well as members of the evaluation committee
which carefully evaluated all submitted theses and found them to be of a very high quality.
Further, I would like to invite all ISSIA members to the General Assembly which will be held at
17:00 on Monday, 11th September. For those who are not ISSIA members yet – please consider
becoming a member – you are very much welcome to come to the meeting as well, so that
you can learn more about our Society. In short, the International Society for Stereology and
Image Analysis (www.issia.net) is an international scientific society aiming to promote stereology
and image analysis in a wide range of disciplines, such as mathematics, biomedicine, physics,
geology, metallurgy, plant biology, etc. The official journal of ISSIA is Image Analysis & Stere-
ology (www.ias-iss.org). ISSIA members are entitled to reduced publication fees in the IAS
journal. Further benefits of ISSIA membership include reduced rates at congresses, courses
and workshops organized by ISSIA; possibility for student members to apply for Hans Elias
bursaries enabling participation in ISSIA Congresses; possibility to take part in a competition
for the best PhD thesis using stereology and/or image analysis; access to the LinkedIn forum
(www.linkedin.com/groups/4239739).
Last but not least I would like to express my thanks and gratitude to ECSIA organizers, especially
Katja Schladitz and Claudia Redenbach, for their tremendous efforts connected with organizing
this event.
Wishing you a pleasant and fruitful time during the congress,
Lucie Kubínová
ISSIA President
Monday, SePTeMber 11Th
Auditorium i 0.01/059:15 Opening addresses by Lucie Kubínová, President of
the International Society for Stereology and Image Analysis and Konrad Steiner, Managing Director of the High Performance Center Simulation and Soft-ware based Innovation
9:45 spatial Point Processes in stereology and Bioimaging, Ute Hahn
10:30 Coffee
spatial statistics Contributed talks
11:00 inLABru – spatial modelling for ecological surveys, Janine B. Illian
Endocytosis Quantification for Characterization of Pharmacological Response in Fluorescence microscopy, Ana I Gomez
11:30 spatiotemporal Point Process modelsfor eye movements, Anna-Kaisa Ylitalo
Stereological Study on the Effect of Running Exercise on the Capillaries in Hippocampus in a rat model of Depression, Yong Tang
12:00 A Model-Based Method for 3D Cell Density estimation from 2D tissue sections, Yi Yin
12:30 Lunch issiA Board meeting, Mo 0.27
spatial statistics Contributed talks
13:30 Second Order Characteristics of Air Bubble Locations in glacial ice, Tuomas Rajala
microstructure modeling of a cold sprayed coating, Bruno Figliuzzi
14:00 Wavelet and spectral analysis of spatial point processes, Martina Sormani
A Stochastic Model of Unsaturated Porous materials, Cedric J. Gommes
14:30 Processes of Spatial Points with Multiple Noisy Appearances, Ina Trolle Andersen
Stochastic Model of the 3D Microstructure of Li-ion Battery Cathodes in Energy Cells Under Various Cyclical Aging scenarios, Klaus Kuchler
15:00 Coffee
15:30 examination of normal, nonnormal and Bi-Modal Grain Size Distributions, George F. Vander Voort
Reactive Flow in Random Porous Media, Torben Prill
16:00 Estimation of the volume-weighted size distri-bution of filler particles in rubber based on investigations of fresh cuts by radiometric stereo microscopy, Joachim Ohser
On the Combination of Stochastic Modeling, image Analysis and numerical simulation for Virtual materials testing, Matthias Neumann
16:30 On the estimation of parameters of a spheroid distribution from planar sections, Markus Baaske
Geometrical Characterization of Bubbly Flows: Comparison of Image Analysis and Stochastic geometry, Mathieu de Langlard
17:15 issiA Assembly
TueSday, SePTeMber 12Th
Auditorium i 0.01/059:00 3D imaging in materials science, Eric Maire
9:45 Recent Developments in the Analysis of Microstructures by 3D-EBSD, Peter Konijnenberg
10:30 Coffee
FIB-SEM image processing and analysis Contributed talks
11:00 Bridging the gap – FIB-SEM tomography for hierarchic structures, Simon Thiele
Estimation of 3D Object Moments by Virtual grid, Jiří Janáček
11:30 Feature Adaptive Sampling – Fast Image Acquisition in scanning electron microscopy, Tim Dahmen
A New Systematic Sampling Design on the Sphere, Javier Gonzalez-Villa
12:00 Macropore Characterization in Silica Monoliths using FIB-SEM Tomography, Sabine Schlabach
improved sampling and Analysis of images in Corneal Confocal microscopy, Jens R. Nyengaard
12:30 Lunch
FIB-SEM image processing and analysis Contributed talks
13:30 removal of Curtaining effects by a Variational Model with Directional Forward Differences, Gabriele Steidl
Volume Estimation with Local Stereological Probes – Practical Application and Potential Bias, Stine Hasselholt
14:00 initial stage sintering of Polymer Particles, Regina Fuchs
Investigation of fibrosis in capillary vessels of murine organs, Sonja Föhst
14:30 exemplar Based inpainting as reconstruction Technique for Sparsely Sampled Scanning Electron microscopy Data, Patrick Trampert
Stereological tools to quantitatively assess the structure of the Sympathetic Ganglia in mammals, Augusto Coppi
15:00 Coffee
stereology and image Analysis in Plant science Contributed talks
15:30 Stereological Analysis in Selection of the Cultivated Plant species, Jadranka Luković
Advanced Microstructural Analysis of Lithium-Ion Active Material Obtained by Synchrotron X-Ray Tomography, Tim Mitsch
16:00 In Situ Measurement of Nuclear Genome Size in Plant tissue sections using DnA image Cytometry, Aleš Kladnik
Modelling the Microstructure of Metal Matrix Composites, Claudia Redenbach
16:30 Overview of Stereological Methods for Mea-surement of Geometrical Characteristics of Plant Photosynthetic Tissues, Cells and Organelles, Lucie Kubínová
Project Meeting “Reconstruction of Porous Media from FIB-SEM Images”
17:00 Poster session and snacks (Z03.07/08)
Auditorium i 0.01/0509:00 Consistency in Different Grain Size Measure
ment Methods, George F. Vander Voort
09:45 On-line and Off-line Image Processing in the steel industry, Gabriel Fricout
10:30 Coffee
modeling of microstructures Contributed talks
11:00 Statistical Analysis of the 3D Microstructure of Paper: Capabilities and Challenges, Karin Zojer
Central Limit Theorems for Subordinated Gaussian Random Fields with Long Memory, Vitalii Makogin
11:30 timeresolved measurement and modeling of Microstructural Coarsening in 3D, Carl E. Krill III
random marked Closed sets – models and statistics, Zbyněk Pawlas
12:00 DataDriven selection of tessellation models Describing Polycrystalline microstructures, Ondrej Šedivý
Variances of estimators based on pixel configuration counts, Jürgen Kampf
12:30 Lunch
modeling of microstructures Contributed talks
13:30 modeling of random Cellular structures for simulation of Properties and Processes at Various Length Scales, Tomasz Wejrzanowski
raster image Analysis of Diffusion for Particle mixtures, Marco Longfils
14:00 Morphological Modeling of Three-Phase Microstructures of Anode Layers using sem images, François Willot
Background Motion Estimation Based on Graph Matching in Star Images, Jinqiu Sun
14:30 Microstructure Characteristics Controlling the Liquid Permeability: Case Studies of Separation membranes and Pem gas Diffusion Layers, Lorenz Holzer
A simple expression for the map of Asplund’s distances with the multiplicative Logarithmic image Processing (LiP) law, Guillaume Noyel
15:00 Coffee
simulation of microstructures Contributed talks
15:30 Flow and deposition simulation related to chromatographic separation processes, Sebastian Osterroth
Computing Bspline surfaces from Volume Data Using a Local Construction Approach, Dennis Mosbach
16:00 Generating digital microstructures for the homogenization of short fiber reinforced plastics with high volume fraction, Matti Schneider
Segmentation of Fibres in Cracked Steel Fibre Reinforced Concrete (SFRC) using Differential Quantities, Markus Kronenberger
16:30 Characterization of solute transport and mixing in porous media through pore-scale information, Giovanni M. Porta
From Single fibre Pullout tests from concrete to the tensile material Properties, Jürgen Schnell
17:00 Coffee
simulation of microstructures Contributed talks
17:15 Pore-Scale Flow Channeling In Heterogeneous media, Martina Siena
Introducing a Histogram Independent Segmentation Routine for Characterization of a Silicon Based Lithium-Ion Anode Material, Thomas Vorauer
17:45 An empirical pore cluster definition based on brittle fracture criterion, Phil Daro Krummrich
structural segmentation of Defective Particle systems, Daniel Westhoff
18:30 Dinner and announcement of results of ISSIA PhD Competition and lecture by the awardee Annick De Backer: “Quantitative atomic resolution microscopy using advanced statistical techniques”
WedneSday, SePTeMber 13Th
ThurSday, SePTeMber 14Th
Auditorium i 0.01/0509:00 Confocal stereology in Biomedicine, Daniel
Peterson
09:45 Current Challenges in Bioimage Informatics,Thomas Walter
10:30 Coffee
10:45 Optimal estimating functions for spatial point processes, Rasmus Waagepetersen
11:30 Coffee
Contributed talks Contributed talks
11:45 Generalized Tortuosity for 3D Characterization of zeolites, Johan Chaniot
Analysis and Modelling of the Influence of Ageing to Microstructure of Lithium-Ion Battery Cells, Julian Feinauer
12:15 Parametric mapping from plant histology images using grey level granulometry, David Legland
simulation of ultrasound scattering effects in a Polycrystalline Medium based on 3D Full-field Xray Orientation microscopy, Dascha Dobrovolskij
12:45 Morphological Dilation and Opening of Ellipsoids, Jesus Angulo
improved Cavalieritype estimation for Perturbed systematic sampling, Mads Stehr
13:15 Lunch
www.mathematik.uni-kl.de/events/ecsia-2017
Proceedings
There are no proceedings in the strict sense. However, you are cordially invited to submit
the paper related to your talk to Image Analysis and Stereology (www.ias-iss.org). For
further information, please feel free to contact Aleš Kladnik during ECSIA.
Abstracts
You can find all abstracts on
https://dexter.itwm.fraunhofer.de/share/fd423beab7dbddc4d44a84f00b52cb63/
Please notice that the abstracts are exclusively for personal use and may not be used other-
wise or redistributed without permission.
www.mathematik.uni-kl.de/events/ecsia-2017
Recommended