View
3
Download
1
Category
Preview:
Citation preview
DIESEL ENGINE4-cylinder in-line engine, turbocharged, Deutz Common Rail (DCR), cooled exhaust gas ricirculation, water-cooled, dry fil-tration. Emissioned according to CEE 97/68 – Compliance Stage IIIA.
Type Deutz TCD 4.1 L4 Max. power 121 kW - 164 HP Rated rpm 2.200Power ISO/TR 14396 115 kW - 156 HPPower EEC 80/1269 115 kW - 156 HPEconomic working range rpm 1400 - 1800Max. torque Nm 609Bore mm 101Stroke mm 126Displacement cm3 4.038
ELECTRIC SYSTEMBattery 12 VoltCapacity EN 60095-1 180 Ah - 1100 AAlternator rating 95 AReverse warning StandardWiring according to IP 67 - DIN 40050
TRANSMISSION Hydrostatic transmission with automatic power regulationand closed circuit with variable displacement pumps and two motors. Four forward/reverse speed with fully automatic gear shift and single-lever control. Gear box with automatic gear and clutch to disconnect of one motorduring travelling speed.
Work speed Forward Reverse1st gear km/h 0÷8 0÷82nd gear km/h 0÷17 0÷17 3rd gear km/h 0÷30 0÷304th gear km/h 0÷40 0÷40
AXLESTwo heavy duty axles with planetary final drivers in each wheel. Rigid drive axle on front chassis section. Oscillating drive axle on rear chassis section, up to a total angle of 20°. Transfer gear box transferring movement directly both to rear and front axle through transmission cardan shaft. Self-locking limited slip differential present on front axle, optional on rear one.
BRAKESService: hydraulic multi-disc oil brake on each wheel.Parking: negative hydraulic on rear, electrically activated.
TYRESStandard 20.5 R 25Optional 20.5 - 25 / 555/70 R24 / 620/70 R26
STEERINGServo-assisted steering through LOAD SENSING hydraulic power steering with separated pump.
Total steering angle 80°Inner tyres turning radius mm 3.130External turning radius mm 5.500External bucket turning radius* mm 6.050
* Bucket on traveling condition
HYDRAULIC SYSTEMSingle variable displacement piston pump with power controlfor the loader, second gear pump for the steering circuit. Selector switch for controlling arm movement speed. Modular 2-element control valve. Double acting hydraulic cylinders. Hydraulic oil cooling radiator with fun having a double speed rotation. Full-flow oil filter on the leakage pipe. Single servolever arm-control with 4-positions lifting system and with 3-positions bucket system.
Max flow lt/1’ 160Loader relief valve pressure bar 280Steering relief valve pressure bar 175Lift cylinder mm 110x750Bucket cylinder mm130x455Lifting time (full) sec. 5,2Lowering time (empty) sec. 4,3Unloading time sec. 1,7Total time of cycle sec. 11,2
SERVICE CAPACITIESEngine lt 11,5Front axle lt 20,5Rear axle lt 20,5Gearbox lt 3,5Hydraulic circuit lt 222Fuel lt 268Water cooling lt 30
TECHNICAL FEATURESStandard bucket capacity m3 2,2Bucket width mm 2.480Straight static tipping load kg 9.700Full turned 40° tipping load kg 8.600Lifting capacity at max. height kg 8.900Dump clearance mm 3.850Dump height at 42° mm 2.950Reach at 42° mm 950Breakout force kg 12.800
DIMENSIONS AND WEIGHTMax lenght in transfer position mm 6.715Max width in transfer position mm 2.480Max Height mm 3.214Track width mm 1.850Overall tyre width mm 2.380Wheel base mm 2.980Ground clearance mm 455Standard operating weight kg 12.300Max permissible weight kg 13.450
The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding. Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.
11.63B
WHEEL LOADER “ Z ” L I N K A G E
EVO
25
2250
44°
2980
950
50
50
38
50
29
50
42°
53°
32
14
33
96
35°
29801560 2175
Full load bucket capacity (SAE)
Bucket width
Bucket weight
Max operative height
Height to hinge pin
Dump angle
Dump height
Dump clearance
Dump distance
Max. dump distance
Bucket static tipping load, straight
Bucket static tipping load, full turn
Breakout force
Total displacement lenght
External bucket turning radius
Standard operating weight
Payload EN 474-3 (80%) [•]
Payload EN 474-3 (60%) [•]
Payload DIN 24094 (50%) [•] Loading center 500 mm
m3
mm
kg
mm
mm
°
mm
mm
mm
kg
kg
kg
mm
mm
kg
kg
kg
kg
kg
2,2
2.480
800
5.050
3.850
42°
2.950
950
2.005
9.700
8.600
12.800
6.7156.050
12.300
1,7
2.480
700
5.000
3.85042°
3.000
894
1.949
10.000
8.800
13.900
6.665
6.025
12.200
2,5
2.540
850
5.125
3.85042°
2.900
1.006
2.061
9.200
8.100
11.900
6.790
6.131
12.350
PERFORMANCE DATA BUCKET ROCK OVERSIZE FORKS
6.400
5.120
3.840
3.200
UNIVERSAL
11.63B
WHEEL LOADER “ Z ” L I N K A G E
EVO
Via Piratello, 106 - 48022 Lugo (RA) ITALYTel. +39 0545 904411 Fax +39 0545 30389e-mail: info@vf-venieri.com www.vf-venieri.comSpare partsTel. +39 0545 904429 Fax +39 0545 24555
The illustrations on the present folder do not necessarily show the product standard version. Data and dimensions described in this folder are not binding. Venieri reserves the right of carrying out possible changes at any time and without previous notice because of its policy of steady developement and improvement of the products.
(2017) UP 1163BEVO_A-EN
P[kW
]
40
50
60
70
80
90
100
110
120
1000 1200 1400 1600 1800 2000 2200
T[N
m]
400
450
500
550
600
650
700
750
800
Speed [rpm]1000 1200 1400 1600 1800 2000 2200
Speed [rpm]
POWER TORQUE
Recommended