View
8
Download
0
Category
Preview:
Citation preview
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
1/8
Chapter 1 Introduction
1.1 Research Background
A studying of factors effect on the problems for the relevancy of the training curriculum to
deal with operational problems in business sectors and training organizations is one of the
importance cores in Develop A Curriculum (DACUM) for vocational and technical schools
as Saglam & Kus (2003) defined vocational and technical education as educating qualified
labor force who can transfer knowledge into production, adapt to innovations, know
contemporary and scientific methods, make comments, find solutions to involve market and
production problems, also assume authority and responsibility in the production by
improvement of goods and services. According to Norton (1997), vocational education and
training (VET) curriculums requires the rigorous identification and verification of the
technical skills (competencies-based education) to be achieved for a high quality, locally
industry-relevant curriculum to your students until the essential competencies (knowledge,
skills, and behaviors) includes a reference to the use of industry-based skills standards
where the schools and industry exist.
1.2 The importance of the study
Once known only for labor-force training for industrial productions and business sectors,
vocational schools are now pursuing the objectives for their students of future
employability and advanced schooling readiness; schools teachers also tend to focus more
on technique training, knowledge of basic subject matter, and development of abilities for
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
2/8
further education. Therefore, the vocational and technical school boards should focus on
teachers pedagogy and students learning in the construction of a new development
curriculum effort and understand the demands from the external environment that can be
useful for the planning of curriculum integration and provide an objective direction for the
trainees.The task of vocational/technical school curriculum development is rather complex
and requires well rounded consideration, which includes predictable and unpredictable
problems. The major goal of curriculum development is to equip the students with the
ability to enter the contemporary workforce or to continue on to higher education.
Educational reform in Viet Nam is intricately linked to this major national initiative whose
goals require a supportive, reinforcing education program. The existing socio-economic,
political and cultural climate of the country call for a redesign of educational objectives,
contents and methods, in order to meet the human resource needs for the projected
industrialization and modernization period. The aim is to complete the basic modernization
and industrialization of the country by the year 2020. Viet Nam seeks to join with the
international community, while still preserving and developing its national traditions.
The concept of skills development in Vietnam, from the perspective of both national and
international experts, is commonly understood as developing some practical skills that
enable people to deliver a specific performance. Skills are often analyzed and compared to
other related or contradictory concepts such as knowledge and theory. In a number of cases,
skills are also considered a component of competency, including: knowledge, skills, and
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
3/8
attitude. Skills development has been increasingly emphasized in the process of setting
educational objectives, designing curriculum and learning materials, as well as teaching and
evaluation in Vietnam.
Curriculum development in Viet Nam is based on three factors: (1) the vision of the
countrys leaders concerning the economy and society within the next ten to twenty years;
(2) educational achievements and curriculum development experiences, based on the
countrys characteristics; (3) the curriculum development trends and experiences of other
countries. Current reforms are based on the following orientations:
- A focus on basic, practical content which can be applied in everyday life;
- An update of content based on scientific, technological and other developments in modern
society;
- The renovation of teaching/learning methods in order to help students develop initiative
and creativity in learning;
- Development of each students ability, especially the ability and methods for self-
learning;
- Due consideration for humanistic and international education;
- Preservation of the national identity of Viet Nam, while participating in the world
community;
- Focus on international curriculum goals of learning to know, learning to do, learning to
be, learning to live together.
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
4/8
Quality training for the workforce is a critical component to support labor market needs.
Providers for training and education fall into 4 different categories: providers of short
courses and workshops; community colleges and vocational institutions; apprenticeship
programs; and 2-years technical/vocational schools, 2-3 years vocational colleges, 4-year
colleges and universities. So DACUM is an acronym for Develop A Curriculum is used
extensively by educators and by trainers when they are establishing a new education or
training program, or revising an existing one. Vocational and Technical Schools uses the
DACUM process to establish a relevant, up-to-date and localized research base for
curriculum and instructional development (Nolan T.D, 1990; Halasz I.M, 1993). Principles
of DACUM are:
- Experienced workers are the experts in their career field and are best able to
identify the work performed and the skills, knowledge, and abilities required to be
successful.
- Business, labor, and education must work as partners to ensure the creation of a
link between the work expectations and the curriculum.
- The DACUM will describe the major functions and key activities, as well as the
technical knowledge and skills, employability skills, and personal attributes needed to
succeed in the workplace.
1.3 Research purposes
The purpose of this study was to provide an understanding of the critical factors necessary
to effect on users acceptance of DACUM method that would be facilitated the helpful
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
5/8
training curriculums into technical and vocational education for high quality workforce in
Vietnam. Therefore, this research made the following question: What factors are necessary
affect in applying DACUM to facilitate the helpful involving of technical training and labor
market demands? A case study design was used to study the efforts of the Faculties in
Technical Vocational School of Post Telecommunication and Informatics N o One (TVSPTI1), Ha Nam, Vietnam in
applying DACUM widely in all setting up for lesson planning and training curriculums. In
this study, the research questions, the hypotheses of users acceptance of DACUM in
technical/vocational training was designed, developed, implemented, and evaluated that
depended on external factors that affecting to the users adoption. Through the collection of
data and descriptive analysis, an understanding of the critical factors necessary to
implement a professional training development was explored.
1.4 Research Questions
In the information system (IS) researches, several theoretical models have been published
through many years to now to analysis and oversee the acceptance of using a technology or
new method in training and education. Examples are the Organizational Information
Processing Theory, the Usage Control Model, the Technology Acceptance Model, the
Theory of Reasoned Action, the Delone and McLean IS success model and the Theory of
Planned Behavior. These models have roots in IS, psychology, information science,
education science, management science and sociology.
Thus, with the strong interest in users adoption of DACUM applying in
technical/vocational schools, the author was definitely convinced of a need to use IS
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
6/8
Success Model to study users acceptance for DACUM in training at Technical Vocational
School of Post Telecommunication and Informatics No
One, Ha Nam. The researcher has
already focused on investigating the user acceptance and the critical factors affecting
adoptions on this system. The main objective of the authors research as following:
Study the factors affecting the benefits of using DACUM in Technical Vocational schoolof
Post Telecommunication and Informatics No1 in Vietnam
Research to focus on resolving the questions as follows:
1 1. To examine how users accept DACUM in technical/vocational training from
now and then.
2 2. To explore which variables affect the users decisions to accept DACUM?
1.5Research Structure
In order to achieve the objectives to evaluate the research model for DACUM , the thesis
consists of five chapters. The first chapter gives an overall context on which the research
problem is identified and research purpose is developed. Chapter two also presents the
layout of the literature review for written work. This chapter is one of the most important
parts of the research. It provides the theoretical frame for research paper, based on which,
the author can clearly identify the research objectives and research methodology to achieve
these objectives. Chapter three presents the methods that researcher has used to do technical
and analytical side for research. This indicates the research philosophy, research design,
research approach and research methods used in this study, including the methods used to
collect secondary data and primary data. By the way, this chapter presents the reasons why
these methods were applied. The analysis of data obtained from surveys and results are
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
7/8
presented in the chapter four. Chapter five provides the way, based on which the answer for
the research questions can be obtained. Research findings, discussion, managerial
implication, and limitation are provided in the last chapter. It also indicates the
opportunities for future study in order to extent the practical scope of the researcher.
7/14/2019 10-Chapter 1 MIS3 VNU Nguyen Thi Lan 97731413
8/8
REFERENCES
Saglam, H., & Kus, R., (2003). Turkiye de Mesleki Teknik Egitim: YenidenYapilandirilma Ihtiyaci, Ankara niversitesi, IVETA Blgesel Konferansi, Ankara,
81-88.
Norton, Robert E. DACUM Handbook, Second Edition. Columbus, OH: Center on
Education and Training for Employment, The Ohio State University, 1987, revised
1997, 2008.
Norton, Robert E. Systematic Curriculum and Instructional Development (SCID). A
workshop handbook developed and assembled for the purpose of providing resources
for five-day curriculum development workshops, 1991, revised 1996, 1998, 2003,
and 2008.
Nolan, T.D., 1990. The DACUM Process, Training Manual, Cincinnati Technical College,
1990.
Open Entries, "The DACUM Connection", Center of Education and Training for
Employment, The Ohio State University, Vol. 3, No. 1, 1993.
The McNellis Company, An Experience in Creating Planning, New Brighton,
Pennsylavania, 1991.Halasz, I.M., 1993. Task Analysis, National Institute of Corrections Academy, Longmont,
Colorado, June 1993.
X X. . . . . . . . . . . . . . . .
Recommended