View
212
Download
0
Category
Preview:
Citation preview
1
Technological Advisory Council
Supporting the Transition to IPDeep Dive and Stake Holders Interviews
and Observations
Extended Presentation
4 December 2014
Extended Presentation References for IP Transition Deep Dive: Access by People with Disabilities Current Capabilities
Assisted Devices Transition Options Devices Transition Recommendations
Are PSTN Islands avoidable on the IP Backbone Edge? What is the rationale for this approach? Why will this approach work?
Actionable Items for Access by People with Disabilities IP Transition Considerations for Non-Service Providers
High-Gain Amplified Telephone TTY Performance – C. Vogler, Galludet TTY Performance – Vanderheiden Elevator / Public Safety Devices Deployment Specific Service Requirements Technical Solutions Exist
Expanded Interview Responses from Rural Broadband Providers Expanded Review of Interview Reponses from Manufacturers
2
Deep Dive: Access by People with Disabilities Current Capabilities
Real-time text (the TTY) on any phone Text that can be intermixed with speech
Real-time text in both directions Speech in one direction, real-time text in the other Speech with real-time text in one direction (and speech, text, or
speech + text back)
A simple device that is always connected, single function, and very simple to use
A phone system that allows one to simply connect ring indicators to the phone line throughout the house to have an indication that the phones are being rung.
3
Access by People with Disabilities: Assisted Devices Transition Options
Devices/ Services Include: TTY Relay service Video relay service Amplified phones Amplified ringing phones Flashing light ring signalers Voice carry-over phones Captioned telephones Hands-free speakerphones
Alternatives Adapt existing devices or replace
with IP capable device Adaptation Considerations
Replacement Costs Consumer Awareness Standard compliance and
performance consistency IETF RFC 4103, TIA 41.3
Last mile performance CPE dependencies
4
Are PSTN Islands avoidable on the IP Backbone Edge?
Small PSTN islands can be managed on the edges of an IP Backbone by either having all gateways able to transcode OR having a special gateway on each PSTN network fragment that is
able to transcode AND pass the call to a destination provider over IP:
Can get info to the users still on the PSTN about using a pre-dial number when their TTY doesn’t work; OR (for outgoing calls only) distribute reprogrammed TTYs that autodial a pre-number
In either case, the pre-dial goes to a PSTN-IP(SIP) gateway then it is passed on to the destination provider over IP
5
What is the rationale for this approach? The key to affordable, workable equivalent communication access is
to ride the voice-phone-call path People who are deaf / Hard-of-hearing / Speech impaired, will not have
interoperability or the ability to call anyone they want unless we provide them with accessible communication channels by enhancing the universal voice communication path and technologies we have with mainstream phone calls.
Equivalently-universal communication for people with disabilities can
only be achieved by enhancing the “telephone calls” so that calls can be made using voice, real-time text, or video and any combination of these. This requires ensuring support for each in both the networks and the
terminal devices.
6
Why will this approach work? Acceptance for interoperable real-time text in IP is growing.
IETF RFC 4103 is referred to as the standard in a number of areas (NG911 Networks, Relay Service systems and terminals, GMSA wireless phones for LTE, and internationally in relay and accessible communications services in Europe).
There is a well-established standard for Real-time text on SIP and IMS that is a natural sibling to voice and video in the backbone.
Other networks can use RTT+VOICE+VIDEO technologies Everything on these network will need to support the RTT + Voice + Video
standard(s) chosen and the formats will need to be transcoded to the standards of the other networks they interface with.
7
Actionable Items for Access by People with Disabilities Promote the development of a single device capable of IP Voice/RTT/ Video
Consider buyback program for TDM Assistive Devices Funding, Training, Consumer Awareness
Encourage Industry Consensus around IETF RFC 4103 for real-time text over IP Acceptance for IETF RFC 4103 for interoperable real-time text in IP is growing in a
number of areas (NG911 Network, Relay services, GMSSA wireless phones for LTE and internationally in accessible communications services in Europe).
There is a well-established standard for Real-time text on SIP and IMS that is a natural sibling to voice and video in the backbone.
Drive industry compliance with TIA Spec 41.3 defining ATA/ device performance Device Certification Proposal Affects Assistive Devices and other legacy devices
Move off of PSTN as fast as possible to avoid PSTN islands
8
High-Gain Amplified Telephones ATA Ringing Voltages and ringing signal type that
may cause some telephones to not ring as expected for an incoming call.
Failure to ring when multiple telephones are connected to the same ATA port.
Failure to ring due to DC voltage loss DTMF receivers on ATAs Outgoing call failures due to short
DTMF signals IVR failures due to inconsistent DTMF
signaling False DTMF signal detection during
speech causing audible tones
ATA loss plan (control of speech levels in/out of ATA) Distortion (high line levels) Unacceptable volume variations
ATA electrical impedance sidetones (noise/ Static) Stability (howling/ squealing)
ATA electrical interface Connection to ATA Failure due to Low
power May not support some line-powered
speakerphones.
9
TTY Performance – C. Vogler, Galludet There are inherent problems with making TTYs work for VoIP.
Rough Guideline: TTY character transmission accuracy requires 99% success.
It can be made to work for core networks with strict QoS guarantees “last-mile” variations make performance difficult, especially for wireless
base stations on the premises. Galludet Recommendation:
Upgrade to an IP-based TTY replacement based on audio (G.711, G.722) and real-time text codecs (RFC4103) where feasible, and use transcoding Baudot to RFC4103 gateways where it is not.
Key Documents For the high-level overview, see the FCC Brief on Disability Issues for
PSTN Transition. For in-depth treatment, see the EAAC report - especially Chapter 6.
10
TTY Performance - Vanderheiden
Ensure that a standard RTT is supported across all of the internets and supported by all terminal devices with Screen & text generation
Commission the creation of a Ref Design for simple - single function - IP Voice, RTT and Video communication device
Move off of PSTN (where only TTYs work) as fast as possible While Transitioning (where there are small PSTN islands) either
have gateways that can transcode (we have prototypes of those) - get info to the (just the users on the PSTN) about using a predial number (to get to a gateway) when their TTY doesn’t work.
Or distribute reprogrammed TTYs that autodial a pre-number (but this only works for
outgoing)
11
Elevator / Public Safety Devices Typically Automatic Ringdown circuits Can almost always accommodate an TDM to IP conversion and maintain
existing device Typically use analog port off the IP System. Analog Telephone Adapters (ATA’s) work for those getting a VoIP phone
system and for those going directly to voice cloud services. The lack of a “Standard” communication protocol by IP service providers
has made it challenging to achieve reliable consistent results converting analog phones but in most cases, experimenting with settings can resolve
TDM emergency phones won’t have to be replaced in most cases, yet an ATA or modifications to existing phones will be required.
Unlike the digital TV conversion from Analog to digital TV where consumers provided free install labor, the Elevator Industry rate is $300/hr labor so the labor cost will dwarf the cost of a new phone.
12
Deployment Specific Service Requirements Technical solutions to migrate or replace exist but
Access network performance and device spec compliance vary widely, extensive troubleshooting required
Funding for replacing obsoleted devices is an issue
Requirements gap examples Alarm industry requires battery monitoring, which may not be supported
by services provider Elevator phones typically require analog line off IP system.
If ATA required, deployment cost dwarf hardware cost. Building owners may not be aware of issues.
Spec exists for ATA’s (TIA TR41.3) but no certification exists.
13
Technical Solutions ExistPolicy Lags: Who Pays? Tighter Specs? Detailed Deployment Guidelines?
Example Exception Issue
Alarm Industry • Battery Back-up monitoring is required for alarms
• Service Providers May or may not provide
• Telemetry for Battery monitoring available, but largely shifted to Subscriber
• Performance of ATA’s (inconsistent POTS emulation)
• Technical ability to monitor Battery life exists
• No requirement today for ISP to deploy battery or monitor deployment or status
• Common interfaces and standards missing
• Resolution requires skilled technical support to solve individual problems
Elevator Phones • Emergency Phones required in most elevators – ATA performance inconsistent
• Building owner faced with upgrading terminal or buying interface CPE.
14
Technical Solutions ExistPolicy Lags: Who Pays? Tighter Specs? Detailed Deployment Guidelines?
Example Exception Issue
AT&T IP Transition Trial
No support planned for outdated/declining services:• Some operator services, Dial
around calls, 3rd Party Pay/Call, DVR services, Elevator phones
Price of replacement services, Fees to transfer, and who pays for required CPE
FAA National Airspace System
21,000 TDM serving locations Budget and Manpower create 2026+ completion estimate
Assistive Devices
• Poor performance of devices on some VoIP services
• Officials distributing assistive devices are usually non-tech
• Field Awareness of device compatibility lacking
• Compatible devices available, But who pays?
• Trouble Resolution requires multiple providers and vendors
• Very tight design tolerances• Equipment Availability
15
Extended Interview Responses from Stakeholders Rural Broadband Providers
Common Themes for Satellite Provider Interview Responses Satellite Broadband Provider Interview Common Theme for Rural Service Provider Interview Responses High Construction Cost Areas - $87 to $100K per mile Interview Middle Construction Cost Areas - $65K per mile Interview Lowest Construction Cost Areas - $15K per mile Interview Midsize Rural Carrier Interview Middle-Mile Provider Interview
Rural Broadband Manufacturers Common Themes for Broadband Equipment Manufacturers Working Group Learnings from Manufacturers Fiber Cable Manufacturer Interviews
16
More Satellites are being launched to improve performance in all areas
Expect up to 50 Mbps in the future with newer satellites Mountainous areas have line of site issues Satellite has more subscribers closer to the cities that in the very
rural areas. Majority of Capitalization not spent until customer signs up Dynamic Beam adjustment in future to reach areas of high demand
17
Common Themes for Satellite Provider Interview Responses:
Satellite Broadband Provider Interview
Speeds Provided: Currently average 12 Mbps down and 3 Mbps up
Newer Satellite being launch will offer 50 Mbps. Capacity: Satellite can meet capacity needs by adding
additional birds, plenty of orbital space, but takes three years to plan. New satellites are being built.
Line of Site Issues: Two percent of installations are abandoned due to customer not wanting trees trimmed. One percent cannot be served due to terrain.
18
Satellite Broadband Provider Interview Continued Comparisons to Landline:
Gaming: Latency is most noticeable for twitch games. VPN: Works, however when using a tunnel to go to an outside website
web accelerator will not work causing delays. Voice: Latency is about a half a second and is noticeable and feels like
a cell to cell call Static IP Address: Available with business services Demographics of Customer area today: Most customer live just outside
the beltway in areas where broadband is not available or very slow speeds. Customers want speeds of FTTH. 40 percent have wireless only for voice.
Cost: Lower upfront cost to start providing service with the majority of the cost coming with installation of home unit.
19
Common Theme for Rural Service Provider Interview Responses:
Employees live in areas they serve: react quickly to customer needs and responses
Middle-mile solutions represent a greater bottle neck to providing broadband access services than last mile solutions Installed larger fiber networks or joined a consortium to form
statewide networks Built redundant connection points over several years, for
reliability Due to long distances to internet gateways, companies worked
to bring traffic closer to end point of their own network to reduce costs and therefore price. Regional solutions provide hosting and transit to mitigate high middle-mile transition costs.
20
21
Common Theme for Rural Service Provider Interview Responses:
Companies have varying stages of VoIP in network Access to a softswitch seems to be a key turning point
for fully deploying VoIP. For them, the transition point has not yet arrived: Companies without softswitches are reviewing options for purchase or
leasing services from hosted parties. Companies with softswitches are hosting services for others. Interestingly, two companies host third party softswitches. Yet, they have
not transitioned their own legacy circuit switched voice customers.
Aggressively adopted new and hybrid solutions which solved geographical challenges and fit investment profiles. Deployment of FTTH in new build situations Extended copper life by reaching customers with VDSL Creative deployment of wireless solutions (LTE or WiMAX)
All companies consider themselves as broadband companies Rural regulated companies been on a roller coaster last 5 years. Cost per mile for buried construction ranged from low $15K, median
$65K to $110 per mile which greatly impact the ROI. ADSL average 9 Kft loop VDSL less than 5 Kft.
22
Common Theme for Rural Service Provider Interview Responses:
High Construction Cost Areas - $87 to $100K per mile Interview Speeds Offered: Most customers 10 Mbps, Fixed
Wireless 4 to 6 Mbps Average take rate for broadband is 67 percent
Services Offered: Voice, Broadband, Wireless and CATV
Biggest Challenges: Distance and Density How to increase usage: Seniors teaching Seniors, High
school seniors go out to the senior center to teach them how to use email, transfer pictures files and to use a cell phone.
23
High Construction Cost Areas - $87 to $100K per mile Interview Continued Plan to leave copper network: 5 years Carrier interconnection with larger companies still TDM. IP from softswitch to field access equipment: FTTH IP to
ONT, VDSL and ADSL IP to DSLAM. Construction: All buried required by agencies Some states require multi-duct placement along R/W to
resell at future date
24
Middle Construction Cost Areas- $65K per mile Interview Speeds offered: In town 50 Mbps, ADSL speeds in rural areas with
fixed 4G LTE to very rural locations Services offered: Landline, wireless and CATV Internet backbone: over Gigabit Ethernet rings Plan to leave copper: five to seven years. One percent can’t reach
with 4G due to terrain will leave on copper for voice Other Issues: Programing cost is a concern. Hard to compete with high
rates because of being a little guy. IP Transition:
Have softswitch with 30 to 40 percent of customer on IP to the home terminal. To be 95% IP by end of 2015. Long distance served over IP with some TDM
Construction: Aerial in town buried in rural
25
Lowest Construction Cost Areas- $15K per mile Interview Speeds offered: Up to 90 Mbps using FTTH and 15 Mbps for VDSL Services Offered: Voice, Broadband, IPTV and Fixed Wireless outside
regulated area Broadband Take Rate: 80 percent with 100 percent available Middle-Mile: Had issues with high tariff DS3 back haul. Work with other
small companies and formed a group to build a fiber network to reduce cost for IP backhaul. Now has large capacity ring service and fraction of costs.
IP Transition in network: IP in field access equipment: FTTH IP to ONT Have Softswitch available and leases services to other, but uses 16 year old
TDM switch for voice Carrier interconnection still TDM.
Construction: All buried down gravel roads
26
Lowest Construction Cost Areas- $15K per mile Interview Continued Use existing facilities as long as possible to support
fastest broadband services; move to newer technology as ROI allows.
Plan new subdivision builds with other utilities to share costs
Place conduit with water and gas All employees spot and act on opportunities to share
construction costs with utilities and roads
27
Midsize Rural Carrier Interview Speeds offered: FTTH, VDSL, ADSL and DOCSIS Services Offered: Voice, Broadband and IP Video and CATV Geographic Area: Same as the smaller rural service
providers Service Area: Provide Broadband to 95 percent of service
area using FTTH, VDSL and ADSL. Last 5 percent served with satellite resale FTTH makes up 11 percent of the network growing at a rate of 4 percent per year.
System Design: Centralized to direct and control progress to an all IP network. Placing FTTH when possible. Company
Plan to leave copper network: 20 years
28
Midsize Rural Carrier Interview Continued IP Transition: Deployed an IP switching overlay network
throughout area. 27 percent is migrated to al IP switching. IP is used as far down the access network as possible but uses traditional dial tone in the home. High demand for IP services for business. Nearly 100 percent of long distance is over IP network.
Construction: Differs by area. Aerial is cheaper however maintenance tradeoff must be review by region to decide on method. Permitting cost have gone up substantially. Look for sewer lines to make RR crossing. Larger Companies get permits and fees reduced by cities when negotiating to Buildout with in the town. No luck but smaller companies.
29
Middle-Mile Provider Interviews
Built to bring broadband to the rural communities and directly serve Hospitals, schools, libraries and public safety in profitable areas where demand currently exists.
MMP not subject to regulation and provides bandwidth to the end service provider (CLEC and small ISP) to connect to rural consumers. MMP not required to serve designated area
Construction mostly buried to reduce ongoing expenses (pole rental)
Not in a position to offer backhaul services to wireless towers
30
Common Themes for Broadbroad Eqpt Manufacturers Interviewed manufacturers of broadband and transport equipment, providing
platforms serving large, medium and small providers in rural areas which handle PSTN voice, VoIP and Broadband services
High degree of aggressiveness by the small provider makes for a suitable test bed for the manufacturers’ products. Manufacturers attribute this to: Small providers having local ties to the community Small providers have small technical staff allowing for easy communication and quick
responses to needed network changes Small providers access to USF Small providers can build with longer payouts when working with local economic
development groups Larger Providers Implementation advantage:
Bulk Volume Purchase Late adopter of products removes initial kinks, cuts cost for Lab Testing, Equipment
and the provider receives historical benefits of customer usage of product
31
Working Group Learnings From ManufacturersATM Conversion to Ethernet Manufactures agree that large amounts of ATM product is still in
service in the larger provider’s territories. Some manufactures currently produce 12 percent line product for ATM use in the broadband market place. This has dropped from 37 percent 5 years ago.
Small providers have already moved from BPON to GPON or Active Ethernet to handle higher speed requirements needed by the user
Some manufacturers can change out ONTs and convert to Ethernet over a period of time while others require a forklift for electronics on both end
32
Working Group Learnings From Manufacturers Continued
Powering of FTTH Network Over Copper Has Not Taken Off Many companies are moving to residential powering of FTTH network with
mini ONTs located in the home. (Back up powering is offered as an optional service for completive reasons)
Powering systems are available on individual cases basis for life threating situations requiring continuous contact
Construction Techniques Large Carriers use pre-marketing prior to build-out of large FTTH areas to
develop a construction sequence. As construction begins, a second marketing team offers service to others in the area. No new hook-ups are offered in an area until later waves of marketing are complete to reduce the use of expensive truck rolls for individual drop placement
33
Fiber Cable Manufacturer Interviews Fiber Manufacturers are constantly looking for ways to lower cost of
fiber Construction cost of fiber and passive hardware is 15 percent of project costs.
Developing Plug and Play fiber in sizes of 12, 24 and 48 using pre-connectorized sections to reduce splicing in the rural towns
In denser areas use of a flat mini cable for micro trenching or place in in existing used conduits. 144 to 288 with ¼ inch diameter. Smaller cable reduces red tape in city permitting and planning.
Multi Dwelling Unit high cost to serve: In door cabling (peel away jacket for installation in tight areas.)
Fiber in the Hallways: Use fiber down the hall with RF MDU in individual apartments.
34
Recommended