1 CISCO NETWORKING ACADEMY PROGRAM (CNAP) SEMESTER 1/ MODULE 5 Cabling LANs and WANs

1

CISCO NETWORKING ACADEMY PROGRAM (CNAP)SEMESTER 1/ MODULE 5

Cabling LANs and WANs

2

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Networking Fundamentals

Objectives

• Upon completion of this module, the student will be able to perform tasks related to the following:

• Cabling the LAN

• Cabling the WAN

3

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

LAN Physical Layer

4

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Ethernet in the Campus

5

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Ethernet Media & Connector

6

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Connection Media

7

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

UTP Implementation

• Order of the wires in must follow EIA/TIA-T568-A or T568-B standards• Three types of patch cables:

• Straight-though cable•Switch to router •Switch to PC or server •Hub to PC or server

• Crossover cable•Switch to switch•Switch to hub •Hub to hub •Router to router •PC to PC •Router to PC

• Rollover cable•console cable

8

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

UTP Implementation

9

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Repeaters

10

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Hubs

• multiport repeaters (generally have from two to twenty-four ports)

• data arriving over the cables to a hub port is electrically repeated on all the other ports connected to the same network segment, except for the port on which the data was sent

11

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Bridges

12

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Switches

• Sometimes described multiport bridges

• Operate at data link layer of OSI reference model

• Switches use gathered information to build forwarding tables to determine the destination

13

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Switches

14

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Wireless

• Wireless signals are electromagnetic waves that travel through the air• Wireless networks use Radio Frequency (RF), laser, infrared (IR), or

satellite/microwaves to carry signals from one computer to another without a permanent cable connection

• Two most common wireless technologies used for networking are:

• IR - line of sight• RF - out of sight, two

approaches used to implement spread spectrum for WLAN transmissions are Frequency Hopping Spread Spectrum (FHSS) and Direct Sequence Spread Spectrum (DSSS)

15

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Host Connectivity

• Host can connect to network using Network Interface Card (NIC)

• NIC is layer-2 device and each NIC carries a unique code called MAC address

16

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Peer-to-peer & Client-server

• Peer-to-peer

• networked computers act as equal partners, or peers

• users control their own resources

• Client-server

• server is a central computer that respond to requests from clients for file, print, application, and other services

17

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Peer-to-Peer VS Client/Server

18

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Peer-to-Peer VS Client/Server

19

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

WAN Physical Layer

20

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

WAN Serial Connection

DTE: Data Terminal Equipment

DCE: Data Communications Equipment

CSU: Channel Service Unit

DSU: Data Service Unit

21

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and Serial Connections

22

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and Serial Connections

23

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and Serial Connections

24

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and Serial Connections

port type slot number / port number

25

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and ISDN BRI Connections

• With ISDN BRI, two types of interfaces may be used, BRI S/T and BRI U

• A BRI interface with an integrated NT1 is labeled BRI U

• A BRI interface without an integrated NT1 is labeled BRI S/T

26

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and DSL Connections

• To connect a router for DSL service, use a phone cable with RJ-11 connectors.

• DSL works over standard telephone lines using pins 3 and 4 on a standard RJ-11 connector.

27

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Routers and Cable Connections

• Coaxial cable and a BNC connector are used to connect the router and cable system

28

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Setting Up Console Connections

29

CISCO NETWORKING ACADEMY PROGRAMSEMESTER 1/ MODULE 5

Cabling LANs and WANs

Summary