View
214
Download
1
Category
Tags:
Preview:
Citation preview
1
Chapter 12 – Web Applications
12.1 Programming for the Web, Part I
12.2 Programming for the Web, Part II
12.3 Using Databases in Web Programs
Web Programs
• The programs in this chapter require the use of either Visual Web Developer 2010 (packaged with this textbook) or the complete version of Visual Studio 2010.
• We assume that you are using one of these two software products.
2
12.1 Programming for the Web, Part I
• Creating a Web Program with Visual Web Developer
• Using a Table to Lay Out a Web Page’s Content
• Accessing a Text File in a Web Program• Binding a Control to a LINQ Query• Opening an Existing Web Program• Building on an Existing Web Program
3
Preliminary Settings
• The following setting need only be carried out once.
• Click on Options in the Tools menu, select General, click on Design View, and click on the OK button. (See next slide.)
4
Creating a Web Program
• Click on New Web Site in the File menu.
• Select Visual Basic in the left pane.
• Select ASP.NET Web Site in the middle pane.
• Select File System as the Web location.
• Give a name and path for the program.
• Click on the OK button.
6
Web Page Tab
The Web page tab is titled “Default.aspx” instead of “Form1. vb [Design]”. The Web page is referred to as Default.aspx in the Solution Explorer window.
9
Toolbox
10
The common controls, such as button, text box, and list box are contained in the Standard group of the Toolbox.
Designing the Web Page
• Begin by clearing the Main Content region.
• Permanent text (called static text) can be typed into the page and formatted directly without the use of labels.
• Text boxes and buttons can be placed at the cursor position (called the insertion point) by double-clicking on them in the Toolbox.
11
Properties Window
13
The name of a control is specified by the ID property instead of the Name property.
Code Editor
• The Code Editor tab reads “Default.aspc.vb” instead of “Form1.vb”.
• The code in the editor is referred to as the code behind.
14
Sample CodeProtected Sub btnCalculate_Click(...) Handles _ btnCalculate.Click
Dim cost As Double = CDbl(txtCost.Text)
Dim percent As Double = CDbl(txtPercent.Text) / 100
txtTip.Text = FormatCurrency(percent * cost)
End Sub
Notice that “Sub” is proceeded by “Protected” instead of “Private”.
15
Running a Program
• Press Ctrl+F5 to run program without debugging.
• Program runs in the computer’s Web browser.
• To terminate the program, close the browser by clicking on , the Close button.
• Close program by clicking on Close Project in the File menu.
16
Tables
• A table control can be used to improve the layout of a Web page.
• Tables are created with the Insert Table command from the Table menu in the Toolbar.
18
Cells
• Text and controls can be placed into cells.
• The alignment (such as right, left, or center) of the contents of a cell can be specified with the Align property from the Properties window.
• Commands from the Table menu allow you to insert and delete rows and columns, and to merge cells.
20
Managing Tables
• Assorted arrows; such as , , , , , and , can be used to highlight groups of cells
and resize tables. • Dragging of the cursor also can be used to
highlight groups of cells.
21
Text Files
• Normally placed in the Solution Explorer’s App_Data folder.
• A text file can be read into an array with a statement of the form
Dim strArrayName() As String = IO.File.ReadAllLines(MapPath("App_Data\" & filename))
• LINQ can then be used to obtain specific information.
22
How to Display the Output of a LINQ Query in a List Box
lstBox.DataSource = query
lstBox.DataBind()
23
How to Display the Output of a LINQ Query in a GridView
Note: The GridView is the VWD equivalent of the VB DataGridView.
grvGrid.DataSource = query
grvGrid.DataBind()
grvGrid.HeaderRow.Cells(0).Text = header for first column
grvGrid.HeaderRow.Cells(1).Text = header for second column etc.
24
How to Open an Existing Web Program
25
first click here
Then navigate to the program’s folder and click on the Open button.
12.2 Programming for the Web, Part II
• Multiple Web Pages
• Validation Controls
• Postback
• The Page Load Event
• Class-Level Variables
• The RadioButtonList Control
• The CheckBox Control
26
How to Add an Additional Web Page to a Program
• Click on an existing Web page to make sure it has the focus.
• Click on Add New Item in the Website menu. (An Add New Item dialog box will appear.)
• Select Web Form in the center pane, type a name into the Name box, and click on the Add button.
27
Hyperlink Control
• Found in the General group of the Toolbox.
• Appears on a page as underlined text.
• Used to navigate to another page.
• NavigateUrl property specifies the page to navigate to.
29
Validation Controls
• Used to validate user input.
• The RequiredFieldValidator control checks that data has been entered into a text box or that an item of a list box has been selected.
• The RangeValidator control checks that the entry in a text box falls within a specified range of values.
31
Sample Web Page
32
RequiredFieldValidator
RangeValidator
Validation controls are not visible at run time. Only appear when input is missing or invalid.
RequiredFieldValidator Control
• The key properties are ControlToVerify and ErrorMessage.
• The ErrorMessage setting is the text that appears when input into the specified control does not meet the given criteria.
33
RangeValidator Control
• The key properties are ControlToVerify, ErrorMessage, Type, MinimumValue, and MaximumValue.
• Possible settings for Type are String, Integer, Double, Date, and Currency.
• The entry in the text box must lie between the MinimumValue and the MaximumValue.
34
Postback
• A postback occurs when the contents of a Web page are sent to the server for processing. Afterwards, the server sends a new page back to the browser.
• When a validation control is triggered, the matter is handled entirely by the browser—no postback occurs.
35
The Page Load Event
• Raised when a Web page is first loaded and every time it is reloaded after a postback.
• The IsPostBack property can be used to guarantee that the page load event is raised only once.
36
Class-Level Variables
• In VWD, class-level variables are of limited value since they do not retain their values after postbacks.
• Devises known as cookies or session variables can be used to retain values.
37
RadioButtonList Control
38
rblAgesrfvAge
VWD does not have a group box control. The radio-button list control is the counterpart of the VB group box containing a set of radio buttons.
RadioButtonList Control (continued)
• The radio-button list control is populated via a ListItem Collection Editor that is invoked from the Tasks button.
• In the previous slide, the control rfvAge, a RequiredFieldValidator, guarantees that a radio button has been selected before the button is clicked on.
39
Check Box Control
40
Example 5 of Section 4.4.
To convert this VB program to a VWD program, the AutoPostBack property of each check box must be set to True.
12.3 Using Databases in Web Programs
• Creating a Bar Chart from a Database
• Displaying Database Information in a Grid
41
The Goal of Section 12.3 is to Generate the Bar Chart Below
42
Note: The data will be extracted from a database.
Four Stages to Create Program
1. Design the Web page
2. Add a database connection
3. Create an object model for the database. (The object model is needed to enable LINQ queries to the database.)
4. Use a LinqDataSource control to display the bar chart.
43
Stage 1: Design Web Page
44
Chart control showing its default bar chart.
The Chart control is found in the Data group of the Toolbox.
Stage 2: Add a Database Connection (continued)
46
Make SQL Server Database File the data source. If necessary, use the Change button to alter the data source.
Stage 2: Add a Database Connection (continued)
47
Click on the Browse button, navigate, and double-click on Megacities.mdf database. Then click on the OK button at bottom of window.
Stage 3: Create an Object Model for the Database (cont.)
50
click on the Yes button
An Object Relational Designer will appear.
Stage 3: Create an Object Model for the Database (cont.)
52
drag to left pane of Object Relational Designer
Stage 3: Create an Object Model for the Database (cont.)
53
The window below appears after the first table is dragged into the Object Relational Designer.
click on the Yes button
Stage 4: Add a LinqDataSource Control
56
Place a LinqDataSource control (in the Data group of the Toolbox) at the bottom of the Web page.
click here
Stage 4: Add a LinqDataSource Control (continued)
57
select MegacitiesDataContext
click on Next button
Stage 4: Add a LinqDataSource Control (continued)
59
double-click on the Display button to bring up the Code- Behind window
Code for btnDisplay_ClickDim mcDC As New MegacitiesDataContext
Dim query = From city In mcDC.Cities
Order By city.pop2010 Descending
Select city.name, city.pop2010
chtMegacities.DataBindTable(query, "name")
chtMegacities.ChartAreas(0).AxisX.Interval = 1
chtMegacities.ChartAreas(0).AxisX.Title = "City"
chtMegacities.ChartAreas(0).AxisY.Title = "2010 Population in Millions"
60
Displaying Database Information in a Grid
62
use a GridView control, call it grvMegacities, instead of a Chart control
Code for btnDisplay_ClickDim mcDC As New MegacitiesDataContext
Dim query = From city In mcDC.Cities
Order By city.pop2010 Descending
Select city.name, city.pop2010
grvMegacities.DataSource = query
grvMegacities.DataBind()
grvMegacities.HeaderRow.Cells(0).Text = "City"
grvMegacities.HeaderRow.Cells(1) = "2010 Population in Millions"
63
Recommended