04 PDM Tools en

Preview:

Citation preview

PacDriveMTools

2ToolsSchneider Electric Automation GmbH

� PacDrive NetManage

� PacDrive Diagnostics

� PacDrive Backup

� Sercos – Firmware Assistant

Tools on Service CD

3ToolsSchneider Electric Automation GmbH

� PacDriveNetManage scans network and finds Controllers, which have minimumFirmware V15.

� With PacDriveNetManage you get Informations about network settings,Project and Firmware of the Controller

� Change of network settings are possible

� Call:

PacDriveManageCall

4ToolsSchneider Electric Automation GmbH

PacDriveManageHandling

5ToolsSchneider Electric Automation GmbH

� Diagnosis tool for reading out project datas without EPAS-4

� PD Diagnostics is only a minimal load, so working on a running machine is possible

� Call:

PacDriveDiagnosticsCall

6ToolsSchneider Electric Automation GmbH

PacDriveDiagnosticsStartpage

7ToolsSchneider Electric Automation GmbH

PacDriveDiagnosticsEvaluation

8ToolsSchneider Electric Automation GmbH

� Firmware consists of software routines which are storedon a non-volontile storage

�Firmware is responsible for the ‚playing together‘ of Hardware and Software.

� Storage :

� Controller - Firmware is stored on the flash

� MotorController - Firmware is stored on anEEPROM

FirmwareNotation

9ToolsSchneider Electric Automation GmbH

� For a correct working of software commands it´s necessary that:

� EPAS-4 Version higher or equal of project version(identical to Controller firmware version)

� Firmwareversion of Controller is higher or equal toFirmwareversion of Drive (MC-4, SCL, iSH )

FirmwareHirarchy

10ToolsSchneider Electric Automation GmbH

� If previous condition are not given you get in case of higher FW-Version

drive than Controlller following diagnosis message:

(see also OnlineHelp)

FirmwareDiagnosis message 509

11ToolsSchneider Electric Automation GmbH

Controller C600:Firmwareversion 20.02

FirmwareController folder ‚Version‘

12ToolsSchneider Electric Automation GmbH

Default path of FirmwareC:\ProgramFiles\ELAU

All tools are to be set as standardfolder onto that path. Tools opensubfolder according your selection.

FirmwareFirmware folder

13ToolsSchneider Electric Automation GmbH

� Firmware change� Formatting aFlash� Create Backup

� Call

PROGRAMFILES | ELAU | PacDriveBackup

PacDriveBackupCall and start page

14ToolsSchneider Electric Automation GmbH

Direct Writing

PacDriveBackupCreate a Backup

15ToolsSchneider Electric Automation GmbH

� Firmwarechange with DriveBackup

� can take place with built in flash

� deletes program- and configuration file

� copys selected firmware onto the flash

� copys a minimal configuration file with selected

IP-Settings onto the flash

PacDriveBackupFirmware change

16ToolsSchneider Electric Automation GmbH

Auswahl: Upgrade / Update

Selection: Controllertype and Firmware

Adapt IP-Settings

Hint: for first call you

must create fira an image

PacDriveBackupFirmware change Controller

17ToolsSchneider Electric Automation GmbH

Write to controller

After bootsequence error LED flashes, because program and configuration file have beendeleted !!

PacDriveBackupFirmware change Controller

18ToolsSchneider Electric Automation GmbH

Selection: Controllertype and Firmware Adapt IP-settings

PacDriveBackupCreating a Flash with OS

19ToolsSchneider Electric Automation GmbH

Write to flash in Reader / Writer

PacDriveBackupCreate a Flash with OS

20ToolsSchneider Electric Automation GmbH

MotorController MC-4:Firmwareversion 20.01

FirmwareMC-4 folder ‚Controller‘

21ToolsSchneider Electric Automation GmbH

� Call of SERCOS Firmware-Assistenten

PROGRAMFILES | ELAU | SERCOS Firmware Assistent

� Change via TCP / IP

� Fw change of different devises in one step (MC-4, PS-4, SCL055, iSH)

� Automatical recognition of drives within SERCOS-Bus

� Conditions

� Hardwareversion Dirve minimum Cxxxxx

� Actual Firmwareversion minimum 15.xx

PacDriveSercos Firmwaree AssistantFirmware change of Drives

22ToolsSchneider Electric Automation GmbH

PacDriveSercos Firmwaree AssistantFirmware change of Drives

23ToolsSchneider Electric Automation GmbH

PacDriveSercos Firmwaree AssistantFirmwarechange of Drives

24ToolsSchneider Electric Automation GmbH

� Change via COM – Interface

with Bootloader kcable (single device)

MC-4X7

PCCom 2

PacDriveSercos Firmwaree AssistantFirmwarechange of Drives

Recommended