View
250
Download
2
Category
Preview:
Citation preview
8/14/2019 01 Centurion
1/6Complete ESP/PCP Systems
Centurion
Pump LineUnmatched performance and abrasion resistance
8/14/2019 01 Centurion
2/6
Breakthrough Design
Centrilift proudly introduces a new, superior lineof pumpsCenturion. Advanced techniques likecomputational fluid dynamics and innovative computerdesign programs in the hands of the most talentedengineers in the business deliver a pump technologybreakthrough. Our goal: design a pump stage thatgenerates more head than any existing stage in theindustry. We achieved our goal and much more.
In addition to more head per stage, Centurion has largervane openings in both the impeller and the diffuser.As a result, Centurion stages are less likely to plug whenpumping sand or fluids that produce scale.
Synergy of Design and Manufacture
Working together, our design engineers and manu-facturing engineers enhanced the manufacturingprocess to yield the most consistent performing stagedesign available.
Further Centurion Advantages
Higher head per stage allows shorter pumps to producethe same amount of fluid for a given application. Morehead per stage also can result in fewer requirements
for tandem pumps. Fewer tandem connections meanfaster installation time and fewer parts. This savesmoney and time and extends run life.
Standard Pump Head and Intake Features
Intake
4.0 in. and 5.38 in. housing, sealed on the thickest partof the wall, combined with buttress threads provide a5,627 psi burst pressure.
Dual O ring seals protect threads.
The 400 series features an 1116-in. shaft in standardpumps and a 78-in. shaft in HV stages. The 538 serieshas a 78-in. and a 1316-in. shaft. Nitronic material isstandard, Monel and Inconel optional.
Captured intake bearing; Ni-Resist standard, tungstencarbide optional.
SAE six-tooth spline mates to all existing seals.
Bolt pattern matches all existing seals.
Head Bolt pattern matches all existing pumps and discharge
heads.
SAE six-tooth spline mates to all existing pumps.Upper end of all shafts are splined to field test rotation.
Multiple O ring seals to protect threads.
Captured bushing in upper bearing. Ni-Resist standard,tungsten carbide optional.
4.0-in. housing sealed on the thickest part of the wall,combined with buttress threads provides a 5,627 psi
burst pressure.
30% Larger30% Larger
CenturionCenturion CompetitorCompetitor
PSS (Particle Swirl Suppression) technology is also incorporated tominimize erosive wear in the diffuser.
Superior stage design affords improved machining techniques and a
cleaner finish on machined parts ensures consistent dimensions that
translate into uniform performance characteristics.Registered Trademark of the Special Metals Corp.
8/14/2019 01 Centurion
3/6
ized Normal Duty Stabilized Heavy Duty Stabilized
ized Heavy Duty Stabilized Severe Duty Stabilized E
ized Severe Duty Stabilized Extreme Duty Stabilized
ized Extreme Duty Stabilized Normal Duty Stabilize
Centurion Severe Service OptionsCentrilift is the industry leader in severe service pumping applications. We have continued that leadershipin the Centurion pump line with our SND, SHD, SSD and SXD abrasion resistant pump designs. These optionaldesigns allow you to select the level of severe service protection best suited to your application.
SND SHD
Stabilized Normal Duty(SND) For wells wheremildly abrasive conditionsare present.
Wear-resistant TungstenCarbide bearings in theintake, discharge and onebearing in the middle of
the pump stack.Diffusers with ParticleSwirl Suppression (PSS)ribs reduce sand cuttingdamage.
Stabilized Heavy (SHD) For wellsmoderately abrasconditions are prand radial supporrequired.
Tungsten Carbidebearings in the intand discharge are resistant to abrasiv
Additional TungstCarbide bearingsthroughout the sta(based on L/D rat
Diffusers with ParSwirl Suppressionribs reduce sand cdamage.
Mixed Flow
Radial Flow
*Based on a length to diame
8/14/2019 01 Centurion
4/6
re Duty Stabilized Extreme Duty Stabilized Normal
me Duty Stabilized Normal Duty Stabilized Heavy D
mal Duty Stabilized Heavy Duty Stabilized Severe
avy Duty Stabilized Severe Duty Stabilized Extreme
SSD SXD
Stabilized Severe Duty for MixedFlow Stages (SSD) For wellswhere highly abrasive conditionsand high flow rates are present,requiring downthrust protection.
Patented Tungsten Carbide flangedsleeve and pedestal decreaserotational wear. Spacing is basedeither on L/D ratio or thrustcapacity.
Tungsten Carbide bearing in intake
and upper bearing.
Diffusers with Particle SwirlSuppression (PSS) ribs reduce sandcutting damage.
Stabilized eXtreme Duty forMixed Flow Stages (SXD) Fowells where extreme abrasiveconditions and high flow ratesare present.
Patented Tungsten Carbideflanged sleeve and pedestal inevery stage decrease rotationalwear.
Tungsten Carbide bearing inintake and upper bearing.
Diffusers with Particle SwirlSuppression (PSS) ribs reducesand cutting damage.
Stabilized Severe Duty for RadialFlow Stages (SSD) For wellswhere highly abrasive conditionsare present, requiring downthrustprotection.
Patented Tungsten Carbide flangedsleeve and bushing mounted in asupport module, spaced throughoutpump based on L/D ratio.
Tungsten Carbide bearing in intake
and upper bearing.
Diffusers with Particle SwirlSuppression (PSS) ribs reduce sandcutting damage.
Stabilized eXtreme Duty forRadial Flow Stages (SXD) Fowells where highly abrasiveconditions are present.
Patented Silicon Carbide downthrust modules with TungstenCarbide radial bearings are highresistant to abrasive wear. Moduare spaced based on L/D ratio.
Tungsten Carbide bearing in
intake and upper bearing.
Diffusers with Particle SwirlSuppression (PSS) ribs reducesand cutting damage.
8/14/2019 01 Centurion
5/6
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 15000.0
5.0
10.0
15.0
20.0
25.0
30.0
35.0
40.0
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
Horsepoweran d
Eff ic iency
Head(ft)
Centurion vs. Competitor
Capacity (B/D)
Centurion Head
CenturionEfficiency
CenturionHor
sepower
CompetitorH
orsepower
CompetitorHead
Com
petit
or
Efficie
ncy
45
40
35
30
25
20
1510
5
00 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400
Capacity (B/D)
Head(ft)
400P-Series Radial Flow
400P6 400P8 400P10 400P12 400P16
400P22
400P6400P4
400P3
35
30
25
20
15
105
00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 6500 7000 7500 8000
Ca acit B/D
Head(ft)
400P-Series Mixed Flow
400P30 400P35 400P43 400P60400P18
60
50
40
30
20
00 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500
Ca acit B/D)
Head(ft)
538P-Series Radial Flow
10 538P17
538P21
538P31
538P37538P11
0 2000 4000 6000 8000 9000 10000 11000 12000 13000 14000 15000Capacity (B/D)
Head(ft)
538P-Series Mixed Flow
1000 3000 5000 7000
60
50
40
30
20
0
10
538P47 538P62538P75 538P100
8/14/2019 01 Centurion
6/6
Worldwide Sales & Service FacilitiesWorldwide Sales & Service Facilities
www.bakerhughesdirect.com
Please consult your Centrilift sales representative for more information.
Argentina
Mendoza54-261-441-3000
Australia
West Perth61-8-9217-7100
Brazil
Rio de Janeiro55-21-2266-8400
Canada
Calgary, Alberta403-537-3400
Leduc, Alberta780-986-5559 / 986-1010
Leduc, Alberta780-986-3232
China
Shekou86-755-26815577 / 5501
Beijing86-10-65973366
Colombia
Bogota571-628-0320 / 7404
Congo
Pointe Noire242-94-2818
Dubai, UAE
Jebel Ali971-4-808 2400
Ecuador
Quito593-22-491-402 / 493-372
Egypt
Alexandria203-4300168
Cairo202-5164917 / 5164918
England
Egham44-1784-477049
France
Lons33-559-927732
Germany
Vechta49-5141 203 876
Indonesia
Batam62-778-321-339
Duri-Riau, Sumatra62-765-91638
Jakarta
62-21-780-0737
Italy
Milano39-02-557-00648
Kuwait
Hadiya966-5-380-4286
Mexico
Ciudad del Carmen Campeche52-938-23224
The Netherlands
Holland31-251-215656
NigeriaPort Harcourt234-84-461464
Norway
Tananger47-51-71-7484
Oman
Muscat968-24564908
Peru
Iquitos51-65-264453
San Isidro, Lima511-441-4242
QatarDoha974-365109
Russia
Moscow7-095-9453080
Saudi Arabia
Al-Khobar966-3858-8090 X104
Scotland
Aberdeen44-1224-772233
Thailand
Bangkok66-2-2642211
Venezuela
El Tigre58-283-235-3171
Maracaibo58-261-7363244
Maturn58-291-6431240
Puerto La Cruz58-281-286-8706
United States
Alaska
Anchorage
907-349-3731North Slope907-670-3352
California
Bakersfield661-831-5365
Huntington Beach714-893-8511
Ventura805-289-1467
Colorado
Denver303-573-8525
Rangely970-675-8426
Mississippi
Laurel601-649-2704
New Mexico
Artesia505-748-0214
Hobbs505-393-8313
Oklahoma
Claremore918-341-9600
Lindsay
405-756-9525
Tulsa918-627-9021
Texas
Abilene325-691-1945
Andrews432-523-5585
Ben Wheeler903-509-6212
Houston713-625-5405
Irving972-518-1871
Marshall903-938-7900
Midland432-694-9676
San Marcos512-392-5369
Snyder432-573-4981
Wyoming
Casper307-266-6540
Cody307-527-6102
Gillette307-686-4943
Recommended