This tool needs to be installed on your terminal before you start the registration process. The...

OMT TOOL INSTALLATION

INSTALLATION/REGISTRATION

Part I: Download Tool Using WebPart II: Download Tool Using CD PartIII: Installation for Windows

PART I: DOWNLOAD TOOL USING WEB

This tool needs to be installed on your terminal before you start the registration process.

The tool can be downloaded from the web or can be installed through a CD.

This section explains the process of installation using a web interface.

The precise steps and screen-shots for installation are provided

hereafter

NOTE: While using data card, the LAN card should be enable for the MAC address.

1. LOGIN USING CSC ID AND PASSWORD

Using the Internet you need to access the CSC online monitoring website and authenticate yourself, for authentication your SCA will provide your CSC ID and password. .

2. YOUR CSC REGISTRATION STATUS

Once CSC user logs in using his/her CSC-ID and password the CSC Registration Status gets displayed as shown below:

Various Status messages that can appear on the screen are indicated in the table below:

STATUS REASON

Commissioned A CSC has been commissioned with an CSC-ID and password but has not installed the tool on any IT terminals.

Registered (Partial)

A CSC has been commissioned with an CSC-ID and password and has installed the tool on some or few of its IT terminals.

Re-Register A CSC has been Registered, but it needs to Re-register installer on its IT terminal.

3. CHOOSE APPROPRIATE DOWNLOAD OPTION

Once you are successfully logged in, your Registration status will appear on the screen, the system will prompt you to download the installer in either of the Operating Systems (Windows/Linux).

5. Run the Download Client

Proceed for Installation hereafter depending on your choice of Operating System.

For Install Process Windows click here III: Installation for Windows OS

PART II: DOWNLOAD TOOL USING CD

This tool needs to be installed on your terminal before you start the registration process.

The tool can be downloaded from the Web or can be installed through a CD.

This section explains the process of installation using an installer CD. Using the CD is preferable if the bandwidth speed is low.

The precise process for installation is provided hereafter

For Windows click here III : Installation for Windows OS

PART III : INSTALLATION PROCESS WINDOWS

This tool needs to be installed on your terminal before you start the registration process. The tool can be downloaded from the Web or can be installed through a CD. This section explains the process of installation using Windows OS. The precise steps and screen-shots for installation are provided hereafter.

1.Install CSC Setup

Once the client has been successfully saved on your computer or once the CD has been inserted on your machine, a self installer pop-up would prompt you to click 'Next' to complete the installation process. Further keep clicking 'Next'/'OK'/ 'Install'/'Yes' whenever prompted.

2.PROCEED FOR CSC CLIENT REGISTRATION

After successful installation process the system will automatically take you to a registration process! Click here to proceed to Registration

PART IV: REGISTRATION PROCESS

To complete registration execute the following steps.

1. Fill in your CSC ID and Password

On the CSC Registration screen provide your valid CSC Login-ID and Password to register

2.Wait Until ConfirmationWait until registration process is under progress.

3.Registration CompleteOnce you have registration your system will restart.

4.Restart your ComputerOnce the system restarts login to the online monitoring tool. The Registration Status would now show 'Registered'.

PART V: RE-INSTALLATION PROCESS

Re-Installation process is meant to down load the installer once again on the machine on which you have successfully installed the Tool. These exceptional

events are: CSC terminal is reformatted CSC terminal suffers from a virus attack CSC hard drive is reformatted Any critical component is replaced causing change of MAC address of a

terminal A newer version of this tool is published

Once a CSC is set to Re-Registration mode the system is ready for Re-Installation