View
4
Download
0
Category
Preview:
Citation preview
KMB-44
2 209 5
NO.5, LANE 209, SEC. 2,
ZIH YOU RD., EAST DISTRICT
70157, TAINAN, TAIWAN
TEL:+886-6-269-1815
sales@kwcgun.com
www.kwcgun.com
12g
www.kwcgun.comKIEN WELL TOY INDUSTRIAL CO., LTD
SINCE 1978
MADE IN TAIWAN
KMB-44
OPERATION BREAK DOWN KMB-44 KMB-44 SERIES EXPLODED VIEWKMB-44 SERIES PARTS LIST
KMB-44
CO2 INNER VALVE PACKING
INSTALLING 12G CO2 CARTRIDGE
CAUTION: Magazine falling directly on the ground could cause deform or damage on it. Please be aware.
Turn the magazine cap out counter-clockwise and place CO2 cartridge B inside the magazine. Rapidly turn the screw A clockwise when piercing the cartridge in the magazine.
CAUTION:To protect your magazine, please release all of the CO2 out of the magazine after every use.
CAUTION:This airsoft has a realistic blowback feature. Be careful of the pinch point.
CAUTION:Safety can only be turned on when this airsoft is cocked.
CO
2 Cartridge is not included
Solution
During the shooting process, sometimes the Slide and the Hammer stop unexpectedly.
Solution: This is not a failure. Just reload and operate again.
After every 2,000 BB shots, lubricating the Firing pin and Track as pictures below is recommended.
K08-00751-1 2015©04/02
Load BBs one by one.
LOADING BBS
CAUTION: Magazine max capacity is 15 rounds. Loading more than this quantity could bring malfunctions.
Insert fully loaded magazine in the airsoft until you hear the sound of “CLICK”.
※Due to improvement, spare parts could bemodified without notification.
P07P23P33P34P35
A02
Z03
R06
Z26
F01F02F03
SAFETY L
VALVETRIGGER GUARD PINTRIGGER BAR PIN
VALVE FRAME
VALVE GATETRIGGER GUARDPRESS UNIT
RUBBER CHAMBERHop-up
VALVE SPRING
GRIP RING
SLIDE STOP SPRING
FLOATING VALVE SPRINGSAFETY SPRING
TRIGGER GUARDPRESS SPRING
TRIGGER BAR SPRING RIGHT
OUTER BARREL
FIRING PIN CATCH SPRINGHAMMER CATCH SPRING
TRIGGER SPRING
TRIGGER AXIS
BARREL PIN AHAMMER SLEEVE
BARREL PIN B
MAGAZINE CATCH PIN
HAMMER AXIS
SLIDE STOP PIN
HAMMER GUIDE PINHAMMER CATCH SLEEVE
NOZZLE SPRING GUIDE
PISTONLEVER SPRING SLEEVE
INNER VALVETRIGGER BAR
TRIGGER GUARD
MAGAZINE BASE JOINT
O-RING S-4O-RING 1X6idR07
R08 O-RING P-9
B01
R03
B03B04B05B07
B12B13B14B15B16B18
B20B21B22B23B24B26B27B28B30B31B34
S04S05S06S07S08S09S10S11S12S13
SM31
S16S17
B08
O-RING S-8
CHASSIS R
CHASSIS L
HAMMER GUIDE
Release the magazinePush thebutton
RELEASE MAGAZINE
Do not display this pistol in public—it may confuse people and may be a crime.
★Always wear eye protection when using airgun.
★
★Read the owner’s manual before using the airgun.
★Never brandish or aiming this airgun at any people or domestic animals. Brandish this airgun in public is dangerous and may be a crime.
★Always transport an airgun in a locked carrying case. Make sure it is unloaded and on safe.
★To Avoid accidental discharge, do not look directly into the barrel.
★Always be aware of your surrounding before and during shooting and select a safe area for target practice.
★Disassemble, modify, or alter of your airgun may cause malfunction, void your warranty and may make it unsafe to use.
Z36 MAGAZINE FOLLOWER
Z39Z48
Z38
MAGAZINE FRAME
P41 VALVE PACKING
Pull down the trigger guard.
Remove the magazine before disassemble.
1
2
3
Hold the trigger guard and pull back the slide. To remove slide, simply pull up the slide.
Slide disassembly done.
Front side Rear side
CAUTION:When inserting the outer barrel spring, mind the direction as shown above.
READ THIS OWNER'S MANUAL COMPLETELY.
① ② ③ ④
This airgun is intended for recreational or training purposes.To prevent improper handling, modification or alteration causing malfunction or accident, please read the owner’s manual carefully. Enjoy the pleasant shooting experience by proper operation.1.Do not put your finger on the trigger except shooting.2.Please choose safe and proper target. 3.Please always keep the airgun on safe and unloaded when not using.4.Like all mechanical devices, an airgun safety can fail. Always handle the airgun
safely even when the safety is “on safe”. Never point the airgun at any people.5.Avoid ricochet. Never shoot at a hard or flat surface or at water. 6.Keep the airgun out of reach for small children.7.Your backstop should be inspected for wear before and after each use.
Discontinue use of the backstop if surface shows signs of failure or ricochet. 8.Only use high quality 4.5mm steel BBs. Never use ①BB diameter larger than 4.4
mm②BB with unsmoothed surface③reused BB that has been fired④incorrect projectiles not design for this airgun
9.Do not expose CO2 cartridges to heat or store them at temperatures above 50C(122 F). CO2 cartridges may over heat or explode at temperatures above 50C(122 F).
10.Check any gun that has been dropped to ensure that its function has not been affected.
c. Please avoid dry firing, for it could cause parts deformed or damage.
Recommended